On Tue, 2011-12-06 at 00:15 +0200, Cristian Falcas wrote: > Hi, > > I was thinking that maybe it may be helpfull to add at the end of > http://www.ovirt.org/wiki/Node_Building a way to test the newly > created iso. For me, it worked with this (presumably you have an > interface with ip 10.10.10.10 on the host): >    qemu-kvm -m 512 -cdrom ovirt-node-image.iso -net nic,model=virtio > -net user,net=10.10.10.20/24,host=10.10.10.10,dhcpstart=10.10.10.20 > > In this setup it looks like the connection is only from the guest to the host. > > Of course, you need to set a root password (as explained from my > knowledge only on this list) and after logging in to do dhclient eth0. > There is any way to specify a way to get the ip from dhcp at boot > time? Agreed that having a way to test is a good idea.  Personally, I have vm setup in virt-manager locally that points directly to where the iso image gets created.  So it's a simple matter of just starting that vm. As for setting the root password, you shouldn't have to do this unless you're facing a problem with the image booting.  The image should boot directly to an installation TUI that doesn't require a password.  The TUI has you set and admin password for future configuration, but you shouldn't need the root password unless there is a problem. Mike > > Best regards, >    Cristi > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

On Tue, 2011-12-06 at 10:37 +0200, Cristian Falcas wrote: > On Tue, Dec 6, 2011 at 00:32, Mike Burns <mburns(a)redhat.com&gt; wrote: > > On Tue, 2011-12-06 at 00:15 +0200, Cristian Falcas wrote: > >> Hi, > >> > >> I was thinking that maybe it may be helpfull to add at the end of > >> http://www.ovirt.org/wiki/Node_Building a way to test the newly > >> created iso. For me, it worked with this (presumably you have an > >> interface with ip 10.10.10.10 on the host): > >> qemu-kvm -m 512 -cdrom ovirt-node-image.iso -net nic,model=virtio > >> -net user,net=10.10.10.20/24,host=10.10.10.10,dhcpstart=10.10.10.20 > >> > >> In this setup it looks like the connection is only from the guest to the host. > >> > >> Of course, you need to set a root password (as explained from my > >> knowledge only on this list) and after logging in to do dhclient eth0. > >> There is any way to specify a way to get the ip from dhcp at boot > >> time? > > > > Agreed that having a way to test is a good idea. Personally, I have vm > > setup in virt-manager locally that points directly to where the iso > > image gets created. So it's a simple matter of just starting that vm. > > > > As for setting the root password, you shouldn't have to do this unless > > you're facing a problem with the image booting. The image should boot > > directly to an installation TUI that doesn't require a password. The > > TUI has you set and admin password for future configuration, but you > > shouldn't need the root password unless there is a problem. > > > > Mike > > > >> > >> Best regards, > >> Cristi > >> _______________________________________________ > >> Users mailing list > >> Users(a)ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > > > > > > Thene I have the same problem with the tui as the other discussion > around here. The after the ovirt first-boot message nothing happenes, > only a complain that there is no virtualization. I will check again to > see if therer are any problems. > > Best regards, Can you try the image that I posted? http://ovirt.org/releases/nightly/binary/ovirt-node-image-gitb30a716f.iso Can you also post the output of the make ovirt-node-image.iso command? Thanks Mike > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users