HE doesn't install under nested virtualization
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization. The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up. enclosed - a gzipped vdsm.log.
I could find this *libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor * near line 8020 What is your host cpu? On Fri, Feb 8, 2019 at 9:57 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
-- KAUSTAV MAJUMDER ASSOCIATE SOFTWARE ENGINEER Red Hat India PVT LTD. <https://www.redhat.com/> kmajumder@redhat.com M: 08981884037 IM: IRC: kmajumder <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatway <https://twitter.com/redhatway> @redhatinc <https://instagram.com/redhatinc> @redhatsnaps <https://snapchat.com/add/redhatsnaps>
AMD Ryzen 2700. The CPU in virt-manager is defined as "host-passthrough" And BTW, before "blaming" the Ryzen, I had the exact same issue with ESXi on Intel processor. On Fri, Feb 8, 2019 at 6:35 PM Kaustav Majumder <kmajumde@redhat.com> wrote:
I could find this *libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor *
near line 8020 What is your host cpu?
On Fri, Feb 8, 2019 at 9:57 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
--
KAUSTAV MAJUMDER
ASSOCIATE SOFTWARE ENGINEER
Red Hat India PVT LTD. <https://www.redhat.com/>
kmajumder@redhat.com M: 08981884037 IM: IRC: kmajumder <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatway <https://twitter.com/redhatway> @redhatinc <https://instagram.com/redhatinc> @redhatsnaps <https://snapchat.com/add/redhatsnaps>
I run it on intel i7 7th gen. Never faced this before. On Fri, Feb 8, 2019 at 10:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
AMD Ryzen 2700. The CPU in virt-manager is defined as "host-passthrough"
And BTW, before "blaming" the Ryzen, I had the exact same issue with ESXi on Intel processor.
On Fri, Feb 8, 2019 at 6:35 PM Kaustav Majumder <kmajumde@redhat.com> wrote:
I could find this *libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor *
near line 8020 What is your host cpu?
On Fri, Feb 8, 2019 at 9:57 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
--
KAUSTAV MAJUMDER
ASSOCIATE SOFTWARE ENGINEER
Red Hat India PVT LTD. <https://www.redhat.com/>
kmajumder@redhat.com M: 08981884037 IM: IRC: kmajumder <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatway <https://twitter.com/redhatway> @redhatinc <https://instagram.com/redhatinc> @redhatsnaps <https://snapchat.com/add/redhatsnaps>
-- KAUSTAV MAJUMDER ASSOCIATE SOFTWARE ENGINEER Red Hat India PVT LTD. <https://www.redhat.com/> kmajumder@redhat.com M: 08981884037 IM: IRC: kmajumder <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatway <https://twitter.com/redhatway> @redhatinc <https://instagram.com/redhatinc> @redhatsnaps <https://snapchat.com/add/redhatsnaps>
Do you have your CPU type set for "host-passthrough"? On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded. On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
Does amd require a nested flag set like Intel does? On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
Yup, and nested is enabled. The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO. On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
On Fri, Feb 8, 2019 at 8:08 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
Which kind of storage are using? Did hosted-engine-setup successfully concluded? if not can you please share your setup logs? if so can you please share agent.log and broker.log?
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
I'm wondering what cluster cpu compatibility version the Ryzen 2700 would go under? It used to default to Opteron G3 when I tried it before, which is now "unsupported" as of ovirt 4.3. CentOS 7 complains about "untested" CPU with Ryzen 2700 in my experience. Maybe Fedora is better there. Here are what shows up in the available cluster options... I'm not sure where and how its defined for specific CPUs. - AMD Opteron G4 - AMD Opteron G5 - AMD EPYC - AMD EPYC IBPB SSBD On Fri, Feb 8, 2019 at 2:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
Ryzen, Threadripper, EPYC - all have the same virtualization down to the last bit (the last option that you mentioned). On Fri, Feb 8, 2019 at 9:26 PM Edward Berger <edwberger@gmail.com> wrote:
I'm wondering what cluster cpu compatibility version the Ryzen 2700 would go under? It used to default to Opteron G3 when I tried it before, which is now "unsupported" as of ovirt 4.3. CentOS 7 complains about "untested" CPU with Ryzen 2700 in my experience. Maybe Fedora is better there.
Here are what shows up in the available cluster options... I'm not sure where and how its defined for specific CPUs.
- AMD Opteron G4 - AMD Opteron G5 - AMD EPYC - AMD EPYC IBPB SSBD
On Fri, Feb 8, 2019 at 2:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
Simone, I'm using the same ZFS server with NFS services, both to my real oVirt machine and to this virt-manager vm's. On Fri, Feb 8, 2019 at 9:19 PM Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Feb 8, 2019 at 8:08 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
Which kind of storage are using? Did hosted-engine-setup successfully concluded? if not can you please share your setup logs? if so can you please share agent.log and broker.log?
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
But, I'm not sure the oVirt/qemu/libvirt/kvm software stack knows that, and probably errs on the side of failure for unknown CPUs. On Fri, Feb 8, 2019 at 2:55 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Ryzen, Threadripper, EPYC - all have the same virtualization down to the last bit (the last option that you mentioned).
On Fri, Feb 8, 2019 at 9:26 PM Edward Berger <edwberger@gmail.com> wrote:
I'm wondering what cluster cpu compatibility version the Ryzen 2700 would go under? It used to default to Opteron G3 when I tried it before, which is now "unsupported" as of ovirt 4.3. CentOS 7 complains about "untested" CPU with Ryzen 2700 in my experience. Maybe Fedora is better there.
Here are what shows up in the available cluster options... I'm not sure where and how its defined for specific CPUs.
- AMD Opteron G4 - AMD Opteron G5 - AMD EPYC - AMD EPYC IBPB SSBD
On Fri, Feb 8, 2019 at 2:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
Do you have your CPU type set for "host-passthrough"?
On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote:
I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record some videos. For that - I'm using nested virtualization.
The problem - after it's setting the HE - it goes up and down like crazy (I defined the email setting to get all the messages) until it gives up.
enclosed - a gzipped vdsm.log.
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
And as I said, I had the exact same issue on ESXi with Intel Xeon E5620, so it's not related to AMD CPU's. On Fri, Feb 8, 2019 at 10:28 PM Edward Berger <edwberger@gmail.com> wrote:
But, I'm not sure the oVirt/qemu/libvirt/kvm software stack knows that, and probably errs on the side of failure for unknown CPUs.
On Fri, Feb 8, 2019 at 2:55 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Ryzen, Threadripper, EPYC - all have the same virtualization down to the last bit (the last option that you mentioned).
On Fri, Feb 8, 2019 at 9:26 PM Edward Berger <edwberger@gmail.com> wrote:
I'm wondering what cluster cpu compatibility version the Ryzen 2700 would go under? It used to default to Opteron G3 when I tried it before, which is now "unsupported" as of ovirt 4.3. CentOS 7 complains about "untested" CPU with Ryzen 2700 in my experience. Maybe Fedora is better there.
Here are what shows up in the available cluster options... I'm not sure where and how its defined for specific CPUs.
- AMD Opteron G4 - AMD Opteron G5 - AMD EPYC - AMD EPYC IBPB SSBD
On Fri, Feb 8, 2019 at 2:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yup, and nested is enabled.
The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO.
On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta <gshereme@redhat.com> wrote:
Does amd require a nested flag set like Intel does?
On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded.
On Fri, Feb 8, 2019 at 6:42 PM femi adegoke <ovirt@fateknollogee.com> wrote:
> Do you have your CPU type set for "host-passthrough"? > > On Feb 8 2019, at 8:25 am, Hetz Ben Hamo <hetz@hetz.biz> wrote: > > I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to > record some videos. For that - I'm using nested virtualization. > > The problem - after it's setting the HE - it goes up and down like > crazy (I defined the email setting to get all the messages) until it gives > up. > > enclosed - a gzipped vdsm.log. > > > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/L45YCPOPV7DEC4... > > _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSNLP34EKMTB4N...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7H5VAMLDQRAJXS...
participants (6)
-
Edward Berger -
femi adegoke -
Greg Sheremeta -
Hetz Ben Hamo -
Kaustav Majumder -
Simone Tiraboschi