Hello I have quite some trouble getting Gluster to work. I have 4 nodes running CentOS and oVirt. These 4 nodes is split up in 2 clusters. I do not run Gluster via oVirt, i run it stand alone to be able to use all 4 nodes into one gluster volume. I can add all peers successfully, and i can create an volume and start it with sucess, but after that it starts to getting troublesome. If i run gluster volume status after starting the volume it times out, i have read that ping-time needs to bee more than 0 so i set it on 30, Still the same problem. From now on, i can not stop a volume nor remove it, i have to stop glusterd and remove it from /var/lib/gluster/vols/* on all nodes to be able to do anything with gluster. From time to time when i do a gluster peer status it shows "disconnected" and when i run it again directly after it show "connected" I get a lot of these errors in glusterd.log [2019-01-20 12:53:46.087848] W [rpc-clnt-ping.c:223:rpc_clnt_ping_cbk] 0-management: socket disconnected [2019-01-20 12:53:46.087858] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:55.091598] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.094846] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.097482] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed What am i doing wrong? //Magnus