Installation of ovirtNode3.6 on VMware workstation is failing
Good day I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported. Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working is there anyone who experienced the same issue
On Fri, Mar 24, 2017 at 11:31 AM, martin chamambo <chamambom@gmail.com> wrote:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported.
Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning
the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working
Are you trying to install it nested, on top of a virtualization solution (VMware) ? Perhaps the kind of HW you are exposing to the node is problematic? Try non-UEFI, for example.
is there anyone who experienced the same issue
I'm not aware of many people trying node on VMware. It works flawlessly on KVM, nested. Y.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
@Yaniv , OvirtNode 4.0 is working flawlessly , and the issue is with DISK partitioning and VMware exposes the same drivers as with ovirtNode 4.0 .... changing to thin LVM ddnt work either...... FYI - i am currently using ovirtNode 4.0 and OvirtEngine 4.0 and its working On Sun, Mar 26, 2017 at 4:40 PM, Yaniv Kaul <ykaul@redhat.com> wrote:
On Fri, Mar 24, 2017 at 11:31 AM, martin chamambo <chamambom@gmail.com> wrote:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported.
Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning
the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working
Are you trying to install it nested, on top of a virtualization solution (VMware) ? Perhaps the kind of HW you are exposing to the node is problematic? Try non-UEFI, for example.
is there anyone who experienced the same issue
I'm not aware of many people trying node on VMware. It works flawlessly on KVM, nested. Y.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Il 24/Mar/2017 09:32, "martin chamambo" <chamambom@gmail.com> ha scritto: Good day I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported. Please note 3.6 and 4.0 have both reached end of life and current supported version is 4.1. Also in 3.6 oVirt Node NG was in tech preview. Are you using a "legacy" oVirt Node iso? Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working is there anyone who experienced the same issue _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
ovirt-node-ng-installer-ovirt-3.6-2016052403 this is the version of the installer that i am using , can anyone confirm then which version of Ovirt (Both Node and Engine) are equivalent to which RHEV equivalents....i am studying for RHCVA and thought ovirtNode 3.6 and 4.0 would work On Sun, Mar 26, 2017 at 9:06 PM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il 24/Mar/2017 09:32, "martin chamambo" <chamambom@gmail.com> ha scritto:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported.
Please note 3.6 and 4.0 have both reached end of life and current supported version is 4.1.
Also in 3.6 oVirt Node NG was in tech preview. Are you using a "legacy" oVirt Node iso?
Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning
the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working
is there anyone who experienced the same issue
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Sun, Mar 26, 2017 at 9:28 PM, martin chamambo <chamambom@gmail.com> wrote:
ovirt-node-ng-installer-ovirt-3.6-2016052403 this is the version of the installer that i am using , can anyone confirm then which version of Ovirt (Both Node and Engine) are equivalent to which RHEV equivalents....i am studying for RHCVA and thought ovirtNode 3.6 and 4.0 would work
I think RHCVA is still on 3.5 but haven't checked it recently.
On Sun, Mar 26, 2017 at 9:06 PM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il 24/Mar/2017 09:32, "martin chamambo" <chamambom@gmail.com> ha scritto:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported.
Please note 3.6 and 4.0 have both reached end of life and current supported version is 4.1.
Also in 3.6 oVirt Node NG was in tech preview. Are you using a "legacy" oVirt Node iso?
Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning
the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working
is there anyone who experienced the same issue
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
Hello Sandro RHCVA should be on 3.6 but the concepts around ovirt and rhev are the same......i also tried ovirt-node-3.6 on workstation and it did not work (issue around Partitions)....I am using ovirt node 4.1 and engine 4.1 because i first need to understand the basics.....Once you understand ovirt ,you van get that rhve 3.6 60 day trial.... On Mon, Apr 10, 2017 at 3:36 PM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
On Sun, Mar 26, 2017 at 9:28 PM, martin chamambo <chamambom@gmail.com> wrote:
ovirt-node-ng-installer-ovirt-3.6-2016052403 this is the version of the installer that i am using , can anyone confirm then which version of Ovirt (Both Node and Engine) are equivalent to which RHEV equivalents....i am studying for RHCVA and thought ovirtNode 3.6 and 4.0 would work
I think RHCVA is still on 3.5 but haven't checked it recently.
On Sun, Mar 26, 2017 at 9:06 PM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il 24/Mar/2017 09:32, "martin chamambo" <chamambom@gmail.com> ha scritto:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 .... on the same engine i also need to test ovirtNode 3.6 since its supported.
Please note 3.6 and 4.0 have both reached end of life and current supported version is 4.1.
Also in 3.6 oVirt Node NG was in tech preview. Are you using a "legacy" oVirt Node iso?
Initially i struggled with installing ovirt engine 4.0 until i selected LVM thin provisioning
the same trick is not working with ovirtNode3.6 ....any type of partition ,standard partition ,LVM ,LVM thin provisioning is not working
is there anyone who experienced the same issue
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
participants (3)
-
martin chamambo -
Sandro Bonazzola -
Yaniv Kaul