5:41 p.m.
Hello,
in my opinion 3.2.1 for fedora 18 doesn't contain this:
http://gerrit.ovirt.org/#/c/11254/
that was one of the biggest problems of 3.2
see also this thread of mine:
http://lists.ovirt.org/pipermail/users/2013-February/012653.html
I had to recompile 3.2 in the mean time and after update to 3.2.1 I
have again the same problems:
- clone from snapshot blocked white window
- snapshot details pane no information for network and disks
So this update was totally worthless for me and I have to recompile
again 3.2.1....
bad!
Gianluca
5:52 p.m.
Hi Gianluca, I checked the code of 3.2 and you are right, the patch was
not pushed there.
Although it seems that the origin fix exists in 3.2, I will send a patch
to fix that.
Regards,
Maor
On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:
Hello,
in my opinion 3.2.1 for fedora 18 doesn't contain this:
http://gerrit.ovirt.org/#/c/11254/
that was one of the biggest problems of 3.2
see also this thread of mine:
http://lists.ovirt.org/pipermail/users/2013-February/012653.html
I had to recompile 3.2 in the mean time and after update to 3.2.1 I
have again the same problems:
- clone from snapshot blocked white window
- snapshot details pane no information for network and disks
So this update was totally worthless for me and I have to recompile
again 3.2.1....
bad!
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:10 p.m.
FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
Thanks for your attention,
Maor
On 03/19/2013 05:52 PM, Maor Lipchuk wrote:
Hi Gianluca, I checked the code of 3.2 and you are right, the patch
was
not pushed there.
Although it seems that the origin fix exists in 3.2, I will send a patch
to fix that.
Regards,
Maor
On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:
> Hello,
> in my opinion 3.2.1 for fedora 18 doesn't contain this:
> http://gerrit.ovirt.org/#/c/11254/
>
> that was one of the biggest problems of 3.2
>
> see also this thread of mine:
> http://lists.ovirt.org/pipermail/users/2013-February/012653.html
>
> I had to recompile 3.2 in the mean time and after update to 3.2.1 I
> have again the same problems:
> - clone from snapshot blocked white window
> - snapshot details pane no information for network and disks
>
> So this update was totally worthless for me and I have to recompile
> again 3.2.1....
> bad!
>
> Gianluca
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:45 p.m.
On Tue, Mar 19, 2013 at 5:10 PM, Maor Lipchuk wrote:
FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
Thanks. Hope to have an rpm update too for fedora 18 ovirt stable repo.
Gianluca
4:59 p.m.
On Tue, Mar 19, 2013 at 5:45 PM, Gianluca Cecchi wrote:
On Tue, Mar 19, 2013 at 5:10 PM, Maor Lipchuk wrote:
> FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
>
Thanks. Hope to have an rpm update too for fedora 18 ovirt stable repo.
Gianluca
If possible it would be great to have upcoming el6 3.2.1-beta1 rpms
set already patched with this ....
Gianluca
2:25 a.m.
On Tue, Mar 19, 2013 at 5:45 PM, Gianluca Cecchi wrote:
On Tue, Mar 19, 2013 at 5:10 PM, Maor Lipchuk wrote:
> FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
>
Thanks. Hope to have an rpm update too for fedora 18 ovirt stable repo.
Gianluca
In the mean time I confirm that I rebuilt 3.2.1 with that patch and
- clone from snapshot works now
- general, disks and network details are present in snapshot details pane now
I take the occasion to point two things
1) this is not new and I also noted many times in 3.2 too.
The first time you connect to web admin gui, the very first operation
that involves opening a new window, you get a non responsive white
window with the circle in the middle
If you close that window (the x at top right) and soon redo the same
operation, the window popups correctly
Probably I notice more this because I'm using oVirt all-in-one with my
Home pc and I reboot it every day....
2) when you make a clone from snapshot, if you don't set a name for
the clone and press ok, nothing happens and you can have the
impression that the window is waiting for something....
it could be better if after pressing the "ok" button and the user has
not selected a name, a message pop ups remembering that it is a
necessary condition to put a name for the clone...
Actually there is something that changes: the surrounding line of the
input field for the clone name changes colour, but as the line is very
thin I didn't notice it at first (add that I'm somewhow colour-blind
and you'll better understand my problem ... ;-)
Cheers,
Gianluca
6:52 p.m.
------=_Part_880_24699370.1363711954839
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
I can create a snapshot, but how can I revert it. Need to has the VM off?=
=20
----- Mensagem original -----
De: "Maor Lipchuk" <mlipchuk(a)redhat.com>=20
Para: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>=20
Cc: users(a)ovirt.org=20
Enviadas: Ter=C3=A7a-feira, 19 de Mar=C3=A7o de 2013 16:10:04=20
Assunto: Re: [Users] oVirt 3.2.1 and clone from snapshot.... argh...!!!=20
FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/=20
Thanks for your attention,=20
Maor=20
On 03/19/2013 05:52 PM, Maor Lipchuk wrote:=20
Hi Gianluca, I checked the code of 3.2 and you are right, the patch
was=
=20
not pushed there.=20
Although it seems that the origin fix exists in 3.2, I will send a patch=
=20
to fix that.=20
=20
Regards,=20
Maor=20
=20
On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:=20
> Hello,=20
> in my opinion 3.2.1 for fedora 18 doesn't contain this:=20
> http://gerrit.ovirt.org/#/c/11254/=20
>=20
> that was one of the biggest problems of 3.2=20
>=20
> see also this thread of mine:=20
> http://lists.ovirt.org/pipermail/users/2013-February/012653.html=20
>=20
> I had to recompile 3.2 in the mean time and after update to 3.2.1 I=20
> have again the same problems:=20
> - clone from snapshot blocked white window=20
> - snapshot details pane no information for network and disks=20
>=20
> So this update was totally worthless for me and I have to recompile=20
> again 3.2.1....=20
> bad!=20
>=20
> Gianluca=20
> _______________________________________________=20
> Users mailing list=20
> Users(a)ovirt.org=20
> http://lists.ovirt.org/mailman/listinfo/users=20
>=20
=20
=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
------=_Part_880_24699370.1363711954839
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: verdana,helvetica,sans-serif; font-size: 10pt; co=
lor: #330066'>I can create a snapshot, but how can I revert it. Need to has=
the VM off?<br><br><hr id=3D"zwchr"><div
style=3D"color: rgb(0, 0, 0); fon=
t-weight: normal; font-style: normal; text-decoration: none; font-family: H=
elvetica,Arial,sans-serif; font-size: 12pt;"><b>De: </b>"Maor
Lipchuk" <=
mlipchuk(a)redhat.com&gt;<br><b>Para: </b>"Gianluca Cecchi"
<gianluca.cecc=
hi(a)gmail.com&gt;<br><b>Cc:
</b>users(a)ovirt.org<br><b>Enviadas: </b>Ter=C3=
=A7a-feira, 19 de Mar=C3=A7o de 2013 16:10:04<br><b>Assunto: </b>Re:
[Users=
] oVirt 3.2.1 and clone from snapshot.... argh...!!!<br><br>FYI, the patch =
is at http://gerrit.ovirt.org/#/c/13172/<br><br>Thanks for your
attention,<=
br>Maor<br><br>On 03/19/2013 05:52 PM, Maor Lipchuk
wrote:<br>> Hi Gianl=
uca, I checked the code of 3.2 and you are right, the patch was<br>> not=
pushed there.<br>> Although it seems that the origin fix exists in 3.2,=
I will send a patch<br>> to fix that.<br>> <br>>
Regards,<br>>=
Maor<br>> <br>> On 03/19/2013 05:41 PM, Gianluca Cecchi
wrote:<br>&g=
t;> Hello,<br>>> in my opinion 3.2.1 for fedora 18 doesn't
contain=
this:<br>>>
http://gerrit.ovirt.org/#/c/11254/<br>>><br>&am...
t; that was one of the biggest problems of
3.2<br>>><br>>> see =
also this thread of mine:<br>>>
http://lists.ovirt.org/pipermail/user=
s/2013-February/012653.html<br>>><br>>> I had to
recompile 3.2 =
in the mean time and after update to 3.2.1 I<br>>> have again the
sam=
e problems:<br>>> - clone from snapshot blocked white
window<br>>&=
gt; - snapshot details pane no information for network and
disks<br>>>=
;<br>>> So this update was totally worthless for me and I have to
rec=
ompile<br>>> again 3.2.1....<br>>>
bad!<br>>><br>>>=
Gianluca<br>>>
_______________________________________________<br>&g=
t;> Users mailing list<br>>>
Users(a)ovirt.org<br>&gt;&gt; http://li=
sts.ovirt.org/mailman/listinfo/users<br>>><br>&...
<br>> <br>> =
_______________________________________________<br>> Users mailing list<=
br>> Users(a)ovirt.org<br>&gt;
http://lists.ovirt.org/mailman/listinfo/use=
rs<br>>
<br><br><br>_______________________________________________<br>U=
sers mailing list<br>Users@ovirt.org<br>http://lists.ovirt.org/mailman/list=
info/users<br></div><br></div></body></html>
------=_Part_880_24699370.1363711954839--
7:11 p.m.
On Tue, Mar 19, 2013 at 5:52 PM, wrote:
I can create a snapshot, but how can I revert it. Need to has the VM
off?
I confirm that also in my oVirt 3.2.1 when the VM is running the
"delete" is greyed out.
I successfully tested that if I shutdown it, then I can complete
snapshot deletion.
during deletion
iotop:
Total DISK READ: 31896.94 K/s | Total DISK WRITE: 30310.11 K/s
PID PRIO USER DISK READ DISK WRITE> SWAPIN IO COMMAND
28654 idle vdsm 30555.40 K/s 30302.88 K/s 0.00 % 31.58 % qemu-img
convert -t none -f qco~88a-40db-a9fb-619a6655c858_MERGE
2830 be/4 root 0.00 K/s 14.47 K/s 0.00 % 0.00 % libvirtd --listen
3141 be/3 vdsm 0.00 K/s 1.32 K/s 0.00 % 0.00 % python
/usr/share/vdsm/vdsm
875 be/3 root 0.00 K/s 0.00 K/s 0.00 % 0.27 % [jbd2/dm-12-8]
2457 be/4 sanlock 1010.10 K/s 0.00 K/s 0.00 % 0.02 % sanlock
daemon -U sanlock -G sanlock
ps:
[root@f18ovn01 ~]# ps -ef| grep convert
vdsm 28654 3141 5 18:00 ? 00:00:06 /usr/bin/qemu-img
convert -t none -f qcow2
/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/013bcc40-5f3d-4394-bd3b-971b14852654/images/43ca3bc4-fefc-43c5-8508-ad4d2599418b/77af271e-a88a-40db-a9fb-619a6655c858
-O raw
/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/013bcc40-5f3d-4394-bd3b-971b14852654/images/43ca3bc4-fefc-43c5-8508-ad4d2599418b/77af271e-a88a-40db-a9fb-619a6655c858_MERGE
root 29211 25304 0 18:02 pts/0 00:00:00 grep --color=auto convert
I don't know how oVirt 3.2.1 is positioned vs rhev 3.1 but I found this:
- rhevm 3.1 manual is wrong in my opinion at page 139 section 8.9.3
because in create VM from snapshot it says:
Ensure the status is Powered Down.
and I think this is not true
(possibly cut-n-paste from procedure 8.20 to 8.21 and forgetting to
leave off the power down thing...)
- rhevm 3.1 at page 141 section 8.9.4 procedure 8.22 is not clear
because it doesn't say if the VM has to be powered down for the
snapshot to be deleted or can be running....
any information for both RHEVM 3.1 and oVirt 3.2.1 and snapshot deletion?
Gianluca
11:12 p.m.
Adding Timothy to the thread.
Remove live snapshot is not supported yet, but it's in the roadmap.
For now VM must be shut down before removing a snapshot.
On 03/19/2013 07:11 PM, Gianluca Cecchi wrote:
On Tue, Mar 19, 2013 at 5:52 PM, wrote:
> I can create a snapshot, but how can I revert it. Need to has the VM off?
I confirm that also in my oVirt 3.2.1 when the VM is running the
"delete" is greyed out.
I successfully tested that if I shutdown it, then I can complete
snapshot deletion.
during deletion
iotop:
Total DISK READ: 31896.94 K/s | Total DISK WRITE: 30310.11 K/s
PID PRIO USER DISK READ DISK WRITE> SWAPIN IO COMMAND
28654 idle vdsm 30555.40 K/s 30302.88 K/s 0.00 % 31.58 % qemu-img
convert -t none -f qco~88a-40db-a9fb-619a6655c858_MERGE
2830 be/4 root 0.00 K/s 14.47 K/s 0.00 % 0.00 % libvirtd --listen
3141 be/3 vdsm 0.00 K/s 1.32 K/s 0.00 % 0.00 % python
/usr/share/vdsm/vdsm
875 be/3 root 0.00 K/s 0.00 K/s 0.00 % 0.27 % [jbd2/dm-12-8]
2457 be/4 sanlock 1010.10 K/s 0.00 K/s 0.00 % 0.02 % sanlock
daemon -U sanlock -G sanlock
ps:
[root@f18ovn01 ~]# ps -ef| grep convert
vdsm 28654 3141 5 18:00 ? 00:00:06 /usr/bin/qemu-img
convert -t none -f qcow2
/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/013bcc40-5f3d-4394-bd3b-971b14852654/images/43ca3bc4-fefc-43c5-8508-ad4d2599418b/77af271e-a88a-40db-a9fb-619a6655c858
-O raw
/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/013bcc40-5f3d-4394-bd3b-971b14852654/images/43ca3bc4-fefc-43c5-8508-ad4d2599418b/77af271e-a88a-40db-a9fb-619a6655c858_MERGE
root 29211 25304 0 18:02 pts/0 00:00:00 grep --color=auto convert
I don't know how oVirt 3.2.1 is positioned vs rhev 3.1 but I found this:
- rhevm 3.1 manual is wrong in my opinion at page 139 section 8.9.3
because in create VM from snapshot it says:
Ensure the status is Powered Down.
and I think this is not true
(possibly cut-n-paste from procedure 8.20 to 8.21 and forgetting to
leave off the power down thing...)
- rhevm 3.1 at page 141 section 8.9.4 procedure 8.22 is not clear
because it doesn't say if the VM has to be powered down for the
snapshot to be deleted or can be running....
any information for both RHEVM 3.1 and oVirt 3.2.1 and snapshot deletion?
Thanks
for pointing that out,
Timothy, perhaps you know who can help with that issue?
Gianluca
11:26 p.m.
On Mar 19, 2013 10:12 PM, "Maor Lipchuk" <mlipchuk(a)redhat.com> wrote:
Adding Timothy to the thread.
Remove live snapshot is not supported yet, but it's in the roadmap.
For now VM must be shut down before removing a snapshot.
Thanks for pointing that out,
Timothy, perhaps you know who can help with that issue?
>
If not already pointed out or opened, I can open a documentation bug, if my
considerations are right
9:28 a.m.
I can help with this issue.
I'll make the fix in the 3.2 documentation. We're not currently doing maintenance
on the RHEV 3.1 docs.
Thanks for catching it Gianluca.
Tim Hildred, RHCE
Content Author II - Engineering Content Services, Red Hat, Inc.
Brisbane, Australia
Email: thildred(a)redhat.com
Internal: 8588287
Mobile: +61 4 666 25242
IRC: thildred
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
Cc: suporte(a)logicworks.pt, "users" <users(a)ovirt.org>,
thildred(a)redhat.com
Sent: Wednesday, March 20, 2013 7:26:56 AM
Subject: Re: [Users] oVirt 3.2.1 and clone from snapshot.... argh...!!!
On Mar 19, 2013 10:12 PM, "Maor Lipchuk" < mlipchuk(a)redhat.com >
wrote:
>
> Adding Timothy to the thread.
>
> Remove live snapshot is not supported yet, but it's in the roadmap.
> For now VM must be shut down before removing a snapshot.
> Thanks for pointing that out,
> Timothy, perhaps you know who can help with that issue?
> >
If not already pointed out or opened, I can open a documentation bug,
if my considerations are right
7:14 p.m.
Il giorno 19/mar/2013 17:10, "Maor Lipchuk" <mlipchuk(a)redhat.com> ha
scritto:
FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
Thanks for your attention,
Maor
On 03/19/2013 05:52 PM, Maor Lipchuk wrote:
> Hi Gianluca, I checked the code of 3.2 and you are right, the patch was
> not pushed there.
> Although it seems that the origin fix exists in 3.2, I will send a patch
> to fix that.
>
> Regards,
> Maor
>
> On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:
>> Hello,
>> in my opinion 3.2.1 for fedora 18 doesn't contain this:
>> http://gerrit.ovirt.org/#/c/11254/
>>
>> that was one of the biggest problems of 3.2
>>
>> see also this thread of mine:
>> http://lists.ovirt.org/pipermail/users/2013-February/012653.html
>>
>> I had to recompile 3.2 in the mean time and after update to 3.2.1 I
>> have again the same problems:
>> - clone from snapshot blocked white window
>> - snapshot details pane no information for network and disks
>>
>> So this update was totally worthless for me and I have to recompile
>> again 3.2.1....
>> bad!
>>
>> Gianluca
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
Hello, I see that 3.2.2 is expected next week.
Are we sure this patch went into?
Any prebuilt rpms I can test against eventually?
It would be a pain having for the third time (after 3.2.0 and 3.2.1) this
feature not available in stock rpm repo and I didn't read anything blocking
it.
I also proposed to include its testing in testing cycle so that it could
arise there before release. ..
Cheers,
Gianluca
4:40 p.m.
Hi Gianluca,
I see in that the hash (7612977fbbd3f5ba9ac68cae2fe88a30577ed732) exists
in the branch there for it should get in the next build, Just to be on
the safe side, Moran, can u please re-verify it.
Regards,
Maor
On 04/24/2013 07:14 PM, Gianluca Cecchi wrote:
Il giorno 19/mar/2013 17:10, "Maor Lipchuk" <mlipchuk(a)redhat.com
<mailto:mlipchuk@redhat.com>> ha scritto:
>
> FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
>
> Thanks for your attention,
> Maor
>
> On 03/19/2013 05:52 PM, Maor Lipchuk wrote:
> > Hi Gianluca, I checked the code of 3.2 and you are right, the patch was
> > not pushed there.
> > Although it seems that the origin fix exists in 3.2, I will send a patch
> > to fix that.
> >
> > Regards,
> > Maor
> >
> > On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:
> >> Hello,
> >> in my opinion 3.2.1 for fedora 18 doesn't contain this:
> >> http://gerrit.ovirt.org/#/c/11254/
> >>
> >> that was one of the biggest problems of 3.2
> >>
> >> see also this thread of mine:
> >> http://lists.ovirt.org/pipermail/users/2013-February/012653.html
> >>
> >> I had to recompile 3.2 in the mean time and after update to 3.2.1 I
> >> have again the same problems:
> >> - clone from snapshot blocked white window
> >> - snapshot details pane no information for network and disks
> >>
> >> So this update was totally worthless for me and I have to recompile
> >> again 3.2.1....
> >> bad!
> >>
> >> Gianluca
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org <mailto:Users@ovirt.org>
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
Hello, I see that 3.2.2 is expected next week.
Are we sure this patch went into?
Any prebuilt rpms I can test against eventually?
It would be a pain having for the third time (after 3.2.0 and 3.2.1)
this feature not available in stock rpm repo and I didn't read anything
blocking it.
I also proposed to include its testing in testing cycle so that it could
arise there before release. ..
Cheers,
Gianluca
10:54 a.m.
On 04/25/2013 04:40 PM, Maor Lipchuk wrote:
Hi Gianluca,
I see in that the hash (7612977fbbd3f5ba9ac68cae2fe88a30577ed732) exists
in the branch there for it should get in the next build, Just to be on
the safe side, Moran, can u please re-verify it.
Regards,
Maor
7612977fbbd3f5ba9ac68cae2fe88a30577ed732 is in line for the next ovirt maintenance
release.
Moran.
On 04/24/2013 07:14 PM, Gianluca Cecchi wrote:
> Il giorno 19/mar/2013 17:10, "Maor Lipchuk" <mlipchuk(a)redhat.com
> <mailto:mlipchuk@redhat.com>> ha scritto:
>> FYI, the patch is at http://gerrit.ovirt.org/#/c/13172/
>>
>> Thanks for your attention,
>> Maor
>>
>> On 03/19/2013 05:52 PM, Maor Lipchuk wrote:
>>> Hi Gianluca, I checked the code of 3.2 and you are right, the patch was
>>> not pushed there.
>>> Although it seems that the origin fix exists in 3.2, I will send a patch
>>> to fix that.
>>>
>>> Regards,
>>> Maor
>>>
>>> On 03/19/2013 05:41 PM, Gianluca Cecchi wrote:
>>>> Hello,
>>>> in my opinion 3.2.1 for fedora 18 doesn't contain this:
>>>> http://gerrit.ovirt.org/#/c/11254/
>>>>
>>>> that was one of the biggest problems of 3.2
>>>>
>>>> see also this thread of mine:
>>>> http://lists.ovirt.org/pipermail/users/2013-February/012653.html
>>>>
>>>> I had to recompile 3.2 in the mean time and after update to 3.2.1 I
>>>> have again the same problems:
>>>> - clone from snapshot blocked white window
>>>> - snapshot details pane no information for network and disks
>>>>
>>>> So this update was totally worthless for me and I have to recompile
>>>> again 3.2.1....
>>>> bad!
>>>>
>>>> Gianluca
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
> Hello, I see that 3.2.2 is expected next week.
> Are we sure this patch went into?
> Any prebuilt rpms I can test against eventually?
> It would be a pain having for the third time (after 3.2.0 and 3.2.1)
> this feature not available in stock rpm repo and I didn't read anything
> blocking it.
> I also proposed to include its testing in testing cycle so that it could
> arise there before release. ..
> Cheers,
> Gianluca
>
4227
days inactive
4267
days old
13 comments
5 participants
participants (5)
-
Gianluca Cecchi -
Maor Lipchuk -
Moran Goldboim -
suporte＠logicworks.pt -
Tim Hildred