12:52 p.m.
Hey again :)
I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster
following this guide:
http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/
However when I run the install command:
yum install -y ovirt-hosted-engine-setup
I get the output:
No package overt-hosted-engine-setup available
Error nothing to do.
But I have run:
yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
I get no error, and I have checked the log files.
And when I run this command:
gluster volume set engine group virt
I get this output:
Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory
Hope some one can help.
Thanks in advance
- Lars Nielsen
5:35 a.m.
Hi,
I saw the same behavior in past.
I solved it by reinstall "glusterfs-server" package.
rpm -qf /var/lib/glusterd/groups/virt
glusterfs-server-3.6.2-1.el7.x86_64
yum reinstall glusterfs-server
Might fix it you also.
Bernd
Am 17.04.2015 um 19:52 schrieb Lars Nielsen:
Hey again :)
I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster
following this guide:
http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/
However when I run the install command:
yum install -y ovirt-hosted-engine-setup
I get the output:
No package overt-hosted-engine-setup available
Error nothing to do.
But I have run:
yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
I get no error, and I have checked the log files.
And when I run this command:
gluster volume set engine group virt
I get this output:
Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory
Hope some one can help.
Thanks in advance
- Lars Nielsen
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Bernd Broermann
Wellingsbütteler Landstr. 241
22337 Hamburg
0172/2982498
040/53888870
http://www.broermann.com
RHCE - Redhat Certified Engineer
11:05 a.m.
Hey
Will try it.
Thank you very much
- Lars
On 19 Apr 2015, at 12:35, Bernd Broermann <bernd(a)broermann.com>
wrote:
Hi,
I saw the same behavior in past.
I solved it by reinstall "glusterfs-server" package.
rpm -qf /var/lib/glusterd/groups/virt
glusterfs-server-3.6.2-1.el7.x86_64
yum reinstall glusterfs-server
Might fix it you also.
Bernd
Am 17.04.2015 um 19:52 schrieb Lars Nielsen:
> Hey again :)
> I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster
following this guide:
> http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/
>
> However when I run the install command:
> yum install -y ovirt-hosted-engine-setup
> I get the output:
> No package overt-hosted-engine-setup available
> Error nothing to do.
>
> But I have run:
> yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
> I get no error, and I have checked the log files.
>
> And when I run this command:
> gluster volume set engine group virt
> I get this output:
> Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or
directory
>
> Hope some one can help.
>
> Thanks in advance
>
> - Lars Nielsen
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Bernd Broermann
Wellingsbütteler Landstr. 241
22337 Hamburg
0172/2982498
040/53888870
http://www.broermann.com
RHCE - Redhat Certified Engineer
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
7:45 a.m.
Hey again
I keep getting this still:
Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such
file or directory
Still no luck after reinstall
- Lars
On 19/04/15 18:05, Lars Nielsen wrote:
Hey
Will try it.
Thank you very much
- Lars
> On 19 Apr 2015, at 12:35, Bernd Broermann <bernd(a)broermann.com> wrote:
>
> Hi,
>
> I saw the same behavior in past.
>
> I solved it by reinstall "glusterfs-server" package.
> rpm -qf /var/lib/glusterd/groups/virt
> glusterfs-server-3.6.2-1.el7.x86_64
>
> yum reinstall glusterfs-server
>
> Might fix it you also.
>
> Bernd
>
>
> Am 17.04.2015 um 19:52 schrieb Lars Nielsen:
>> Hey again :)
>> I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster
following this guide:
>> http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/
>>
>> However when I run the install command:
>> yum install -y ovirt-hosted-engine-setup
>> I get the output:
>> No package overt-hosted-engine-setup available
>> Error nothing to do.
>>
>> But I have run:
>> yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
>> I get no error, and I have checked the log files.
>>
>> And when I run this command:
>> gluster volume set engine group virt
>> I get this output:
>> Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or
directory
>>
>> Hope some one can help.
>>
>> Thanks in advance
>>
>> - Lars Nielsen
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> --
> Bernd Broermann
> Wellingsbütteler Landstr. 241
> 22337 Hamburg
>
> 0172/2982498
> 040/53888870
> http://www.broermann.com
> RHCE - Redhat Certified Engineer
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Med venlig hilsen / Best Regards
Lars Nielsen
Student developer at Steinwurf
lars(a)steinwurf.com
7:49 a.m.
This is a multi-part message in MIME format.
--------------000502050508040501060009
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
On 04/22/2015 02=3A45 PM=2C Lars Nielsen wrote=3A
=3E Hey again
=3E I keep getting this still=3A
=3E Unable to open file =E2=80=98/var/lib/glusterd/groups/virt=E2=80=99=
=2E Error=3A No
=3E such file or directory
=3E Still no luck after reinstall
=3E
=3E - Lars
=3E
=3E
=3E On 19/04/15 18=3A05=2C Lars Nielsen wrote=3A
=3E=3E Hey
=3E=3E
=3E=3E Will try it=2E
=3E=3E Thank you very much
=3E=3E
=3E=3E - Lars
=3E=3E
=3E=3E=3E On 19 Apr 2015=2C at 12=3A35=2C Bernd Broermann =3Cbernd=40broerm=
ann=2Ecom=3E wrote=3A
=3E=3E=3E
=3E=3E=3E Hi=2C
=3E=3E=3E
=3E=3E=3E I saw the same behavior in past=2E
=3E=3E=3E
=3E=3E=3E I solved it by reinstall =22glusterfs-server=22 package=2E
=3E=3E=3E rpm -qf /var/lib/glusterd/groups/virt
=3E=3E=3E glusterfs-server-3=2E6=2E2-1=2Eel7=2Ex86=5F64
=3E=3E=3E
=3E=3E=3E yum reinstall glusterfs-server
=3E=3E=3E
=3E=3E=3E Might fix it you also=2E
=3E=3E=3E
=3E=3E=3E Bernd
=3E=3E=3E
=3E=3E=3E
=3E=3E=3E Am 17=2E04=2E2015 um 19=3A52 schrieb Lars Nielsen=3A
=3E=3E=3E=3E Hey again =3A=29
=3E=3E=3E=3E I have a problem with ovirt 3=2E5=2E I am trying to setup oVir=
t 3=2E5 and
=3E=3E=3E=3E using gluster following this guide=3A
=3E=3E=3E=3E http=3A//community=2Eredhat=2Ecom/blog/2014/10/up-and-running-=
with-ovirt-3-5/
=3E=3E=3E=3E
=3E=3E=3E=3E
=3E=3E=3E=3E However when I run the install command=3A
=3E=3E=3E=3E yum install -y ovirt-hosted-engine-setup
=3E=3E=3E=3E I get the output=3A
=3E=3E=3E=3E No package overt-hosted-engine-setup available
=3E=3E=3E=3E Error nothing to do=2E
=3E=3E=3E=3E
=3E=3E=3E=3E But I have run=3A
=3E=3E=3E=3E yum localinstall -y
=3E=3E=3E=3E http=3A//resources=2Eovirt=2Eorg/pub/yum-repo/ovirt-release35=
=2Erpm
=3E=3E=3E=3E I get no error=2C and I have checked the log files=2E
=3E=3E=3E=3E
=3E=3E=3E=3E And when I run this command=3A
=3E=3E=3E=3E gluster volume set engine group virt
=3E=3E=3E=3E I get this output=3A
=3E=3E=3E=3E Unable to open file =E2=80=98/var/lib/glusterd/groups/virt=
=E2=80=99=2E Error=3A No
=3E=3E=3E=3E such file or directory
=3E=3E=3E=3E
=3E=3E=3E=3E Hope some one can help=2E
=3E=3E=3E=3E
=3E=3E=3E=3E Thanks in advance
=3E=3E=3E=3E
=3E=3E=3E=3E - Lars Nielsen
=3E=3E=3E=3E
=3E=3E=3E=3E
=3E=3E=3E=3E
=3E=3E=3E=3E
=3E=3E=3E=3E =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F
=3E=3E=3E=3E Users mailing list
=3E=3E=3E=3E Users=40ovirt=2Eorg
=3E=3E=3E=3E http=3A//lists=2Eovirt=2Eorg/mailman/listinfo/users
=3E=3E=3E=3E
=3E=3E=3E --=20
=3E=3E=3E Bernd Broermann
=3E=3E=3E Wellingsb=C3=BCtteler Landstr=2E 241
=3E=3E=3E 22337 Hamburg
=3E=3E=3E
=3E=3E=3E 0172/2982498
=3E=3E=3E 040/53888870
=3E=3E=3E http=3A//www=2Ebroermann=2Ecom
=3E=3E=3E RHCE - Redhat Certified Engineer
Hi=2C
I think this is this bug=3A
https=3A//bugzilla=2Eredhat=2Ecom/show=5Fbug=2Ecgi=3Fid=3D1129592
Netbulae =3Cmailto=3Ainfo=40netbulae=2Ecom=3E 2014-08-14 05=3A50=3A15 E=
DT
I just read something about this in the following article=3A
http=3A//blog=2Egluster=2Eorg/2014/05/ovirt-3-4-glusterized/
Create a file named =60/var/lib/glusterd/groups/virt=27 and paste in th=
e lines below=2E This provides a =22virt=22 group with settings optimized f=
or VM storage=2E I=27ve left off two quorum-related options present in the=
original group definition=2E These quorum settings help prevent split-brai=
n=2C but will cause VMs hosted on Gluster volumes with the settings applied=
to pause when one of our two machines goes offline=2E
quick-read=3Doff
read-ahead=3Doff
io-cache=3Doff
stat-prefetch=3Doff
eager-lock=3Denable
remote-dio=3Denable
Next=2C we=27ll add our new engine volume to this virt group=3A
gluster volume set engine group virt
I never createde the virt file and it=27s not in this directory=2E
Can it be auto created on setup=3F
Forgot to add these for cluster =3E2 nodes=3A
quorum-type=3Dauto
server-quorum-type=3Dserver
As per https=3A//github=2Ecom/gluster/glusterfs/blob/master/extras/grou=
p-virt=2Eexample
Met vriendelijke groet=2C With kind regards=2C
Jorick Astrego
Netbulae Virtualization Experts=20
----------------
=09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK=
08198180
=09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW=
NL821234584B01
----------------
--------------000502050508040501060009
Content-Type: text/html;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
=3Chtml=3E
=3Chead=3E
=3Cmeta content=3D=22text/html=3B charset=3Dutf-8=22 http-equiv=3D=22Co=
ntent-Type=22=3E
=3C/head=3E
=3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E
=3Cbr=3E
=3Cbr=3E
=3Cdiv class=3D=22moz-cite-prefix=22=3EOn 04/22/2015 02=3A45 PM=2C Lars=
Nielsen
wrote=3A=3Cbr=3E
=3C/div=3E
=3Cblockquote cite=3D=22mid=3A553797E8=2E70602=40steinwurf=2Ecom=22 typ=
e=3D=22cite=22=3EHey
again
=3Cbr=3E
I keep getting this still=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0 Unable to open file =E2=80=98/var/lib/glusterd/gro=
ups/virt=E2=80=99=2E Error=3A No
such file or directory
=3Cbr=3E
Still no luck after reinstall
=3Cbr=3E
=3Cbr=3E
- Lars
=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
On 19/04/15 18=3A05=2C Lars Nielsen wrote=3A
=3Cbr=3E
=3Cblockquote type=3D=22cite=22=3EHey
=3Cbr=3E
=3Cbr=3E
Will try it=2E
=3Cbr=3E
Thank you very much
=3Cbr=3E
=3Cbr=3E
- Lars
=3Cbr=3E
=3Cbr=3E
=3Cblockquote type=3D=22cite=22=3EOn 19 Apr 2015=2C at 12=3A35=2C B=
ernd
Broermann =3Ca class=3D=22moz-txt-link-rfc2396E=22 href=3D=22mail=
to=3Abernd=40broermann=2Ecom=22=3E=26lt=3Bbernd=40broermann=2Ecom=26gt=3B=
=3C/a=3E wrote=3A
=3Cbr=3E
=3Cbr=3E
Hi=2C
=3Cbr=3E
=3Cbr=3E
I saw the same behavior in=C2=A0 past=2E
=3Cbr=3E
=3Cbr=3E
I solved it by reinstall=C2=A0 =22glusterfs-server=22 package=2E=
=3Cbr=3E
=C2=A0=C2=A0 rpm -qf /var/lib/glusterd/groups/virt
=3Cbr=3E
=C2=A0=C2=A0 glusterfs-server-3=2E6=2E2-1=2Eel7=2Ex86=5F64
=3Cbr=3E
=3Cbr=3E
=C2=A0=C2=A0 yum reinstall glusterfs-server
=3Cbr=3E
=3Cbr=3E
Might fix it you also=2E
=3Cbr=3E
=3Cbr=3E
Bernd
=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
Am 17=2E04=2E2015 um 19=3A52 schrieb Lars Nielsen=3A
=3Cbr=3E
=3Cblockquote type=3D=22cite=22=3EHey again =3A=29
=3Cbr=3E
I have a problem with ovirt 3=2E5=2E I am trying to setup oVirt=
3=2E5 and using gluster following this guide=3A
=3Cbr=3E
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=3A//community=2Ered=
hat=2Ecom/blog/2014/10/up-and-running-with-ovirt-3-5/=22=3Ehttp=3A//communi=
ty=2Eredhat=2Ecom/blog/2014/10/up-and-running-with-ovirt-3-5/=3C/a=3E
=3Cbr=3E
=3Cbr=3E
However when I run the install command=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0yum install -y ovirt-hosted-engine-setu=
p
=3Cbr=3E
I get the output=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0No package overt-hosted-engine-setup av=
ailable
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0Error nothing to do=2E
=3Cbr=3E
=3Cbr=3E
But I have run=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0yum localinstall -y
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=3A//res=
ources=2Eovirt=2Eorg/pub/yum-repo/ovirt-release35=2Erpm=22=3Ehttp=3A//resou=
rces=2Eovirt=2Eorg/pub/yum-repo/ovirt-release35=2Erpm=3C/a=3E
=3Cbr=3E
I get no error=2C and I have checked the log files=2E
=3Cbr=3E
=3Cbr=3E
And when I run this command=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0gluster volume set engine group virt
=3Cbr=3E
I get this output=3A
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0Unable to open file =E2=80=98/var/lib/g=
lusterd/groups/virt=E2=80=99=2E
Error=3A No such file or directory
=3Cbr=3E
=3Cbr=3E
Hope some one can help=2E
=3Cbr=3E
=3Cbr=3E
Thanks in advance
=3Cbr=3E
=3Cbr=3E
- Lars Nielsen
=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F
=3Cbr=3E
Users mailing list
=3Cbr=3E
=3Ca class=3D=22moz-txt-link-abbreviated=22 href=3D=22mailto=3A=
Users=40ovirt=2Eorg=22=3EUsers=40ovirt=2Eorg=3C/a=3E
=3Cbr=3E
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=3A//lis=
ts=2Eovirt=2Eorg/mailman/listinfo/users=22=3Ehttp=3A//lists=2Eovirt=2Eorg/m=
ailman/listinfo/users=3C/a=3E
=3Cbr=3E
=3Cbr=3E
=3C/blockquote=3E
--=C2=A0=3Cbr=3E
Bernd Broermann
=3Cbr=3E
Wellingsb=C3=BCtteler Landstr=2E 241
=3Cbr=3E
22337 Hamburg
=3Cbr=3E
=3Cbr=3E
0172/2982498
=3Cbr=3E
040/53888870
=3Cbr=3E
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=3A//www=
=2Ebroermann=2Ecom=22=3Ehttp=3A//www=2Ebroermann=2Ecom=3C/a=3E
=3Cbr=3E
RHCE - Redhat Certified Engineer=3Cbr=3E
=3C/blockquote=3E
=3C/blockquote=3E
=3C/blockquote=3E
=3Cbr=3E
=3Cbr=3E
Hi=2C =3Cbr=3E
=3Cbr=3E
I think this is this bug=3A
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22https=3A//bugzilla=
=2Eredhat=2Ecom/show=5Fbug=2Ecgi=3Fid=3D1129592=22=3Ehttps=3A//bugzilla=2Er=
edhat=2Ecom/show=5Fbug=2Ecgi=3Fid=3D1129592=3C/a=3E=3Cbr=3E
=3Cbr=3E
=3Cblockquote=3E=3Cspan class=3D=22bz=5Fcomment=5Fuser=22=3E =3Cspan cl=
ass=3D=22vcard =22=3E=3Ca
class=3D=22email=22 href=3D=22mailto=3Ainfo=40netbulae=2Ecom=22=
title=3D=22Netbulae =26lt=3Binfo=40netbulae=2Ecom=26gt=3B=22=3E=
=3Cspan
class=3D=22fn=22=3ENetbulae=3C/span=3E=3C/a=3E
=3C/span=3E =3C/span=3E =3Cspan class=3D=22bz=5Fcomment=5Fuser=5Fim=
ages=22=3E =3C/span=3E
=3Cspan class=3D=22bz=5Fcomment=5Ftime=22=3E 2014-08-14 05=3A50=3A15=
EDT =3C/span=3E
=3Cpre class=3D=22bz=5Fcomment=5Ftext
bz=5Fwrap=5Fcomment=5Ftext=22 id=3D=22comment=5Ftext=5F1=
=22=3EI just read something about this in the following article=3A
=3Ca href=3D=22http=3A//blog=2Egluster=2Eorg/2014/05/ovirt-3-4-glusterized/=
=22=3Ehttp=3A//blog=2Egluster=2Eorg/2014/05/ovirt-3-4-glusterized/=3C/a=3E=
Create a file named =60/var/lib/glusterd/groups/virt=27 and paste in the li=
nes below=2E This provides a =22virt=22 group with settings optimized for V=
M storage=2E I=27ve left off two quorum-related options present in the orig=
inal group definition=2E These quorum settings help prevent split-brain=2C=
but will cause VMs hosted on Gluster volumes with the settings applied to=
pause when one of our two machines goes offline=2E
quick-read=3Doff
read-ahead=3Doff
io-cache=3Doff
stat-prefetch=3Doff
eager-lock=3Denable
remote-dio=3Denable
Next=2C we=27ll add our new engine volume to this virt group=3A
gluster volume set engine group virt
I never createde the virt file and it=27s not in this directory=2E
Can it be auto created on setup=3F
=3C/pre=3E
=3Cdiv id=3D=22c2=22 class=3D=22bz=5Fcomment=22=3E=3Cbr=3E
=3Cpre class=3D=22bz=5Fcomment=5Ftext
bz=5Fwrap=5Fcomment=5Ftext=22 id=3D=22comment=5Ftext=5F2=
=22=3EForgot to add these for cluster =26gt=3B2 nodes=3A
quorum-type=3Dauto
server-quorum-type=3Dserver
As per =3Ca href=3D=22https=3A//github=2Ecom/gluster/glusterfs/blob/master/=
extras/group-virt=2Eexample=22=3Ehttps=3A//github=2Ecom/gluster/glusterfs/b=
lob/master/extras/group-virt=2Eexample=3C/a=3E=3C/pre=3E
=3C/div=3E
=3C/blockquote=3E
=3Cbr=3E
=20=
=3CBR /=3E
=3CBR /=3E
=3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c=
olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22=
mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet=
=2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font=
=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul=
ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B=
border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22=
=3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=
=22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf=
ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid=
th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty=
le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr=
=3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax=
=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=
=3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130=
px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w=
idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E=
=3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top=
=3A1px solid =23ccc=3B=22=3E=3CBR /=3E
=3C/body=3E
=3C/html=3E
--------------000502050508040501060009--
7:52 a.m.
On 22/04/15 14:49, Jorick Astrego wrote:
On 04/22/2015 02:45 PM, Lars Nielsen wrote:
> Hey again
> I keep getting this still:
> Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No
> such file or directory
> Still no luck after reinstall
>
> - Lars
>
>
> On 19/04/15 18:05, Lars Nielsen wrote:
>> Hey
>>
>> Will try it.
>> Thank you very much
>>
>> - Lars
>>
>>> On 19 Apr 2015, at 12:35, Bernd Broermann <bernd(a)broermann.com> wrote:
>>>
>>> Hi,
>>>
>>> I saw the same behavior in past.
>>>
>>> I solved it by reinstall "glusterfs-server" package.
>>> rpm -qf /var/lib/glusterd/groups/virt
>>> glusterfs-server-3.6.2-1.el7.x86_64
>>>
>>> yum reinstall glusterfs-server
>>>
>>> Might fix it you also.
>>>
>>> Bernd
>>>
>>>
>>> Am 17.04.2015 um 19:52 schrieb Lars Nielsen:
>>>> Hey again :)
>>>> I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5
>>>> and using gluster following this guide:
>>>> http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/
>>>>
>>>>
>>>> However when I run the install command:
>>>> yum install -y ovirt-hosted-engine-setup
>>>> I get the output:
>>>> No package overt-hosted-engine-setup available
>>>> Error nothing to do.
>>>>
>>>> But I have run:
>>>> yum localinstall -y
>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
>>>> I get no error, and I have checked the log files.
>>>>
>>>> And when I run this command:
>>>> gluster volume set engine group virt
>>>> I get this output:
>>>> Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No
>>>> such file or directory
>>>>
>>>> Hope some one can help.
>>>>
>>>> Thanks in advance
>>>>
>>>> - Lars Nielsen
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>> --
>>> Bernd Broermann
>>> Wellingsbütteler Landstr. 241
>>> 22337 Hamburg
>>>
>>> 0172/2982498
>>> 040/53888870
>>> http://www.broermann.com
>>> RHCE - Redhat Certified Engineer
Hi,
I think this is this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1129592
Netbulae <mailto:info@netbulae.com> 2014-08-14 05:50:15 EDT
I just read something about this in the following article:
http://blog.gluster.org/2014/05/ovirt-3-4-glusterized/
Create a file named `/var/lib/glusterd/groups/virt' and paste in the lines below.
This provides a "virt" group with settings optimized for VM storage. I've
left off two quorum-related options present in the original group definition. These quorum
settings help prevent split-brain, but will cause VMs hosted on Gluster volumes with the
settings applied to pause when one of our two machines goes offline.
quick-read=off
read-ahead=off
io-cache=off
stat-prefetch=off
eager-lock=enable
remote-dio=enable
Next, we'll add our new engine volume to this virt group:
gluster volume set engine group virt
I never createde the virt file and it's not in this directory.
Can it be auto created on setup?
Forgot to add these for cluster >2 nodes:
quorum-type=auto
server-quorum-type=server
As perhttps://github.com/gluster/glusterfs/blob/master/extras/group-virt.exa...
Met vriendelijke groet, With kind regards,
Jorick Astrego*
Netbulae Virtualization Experts *
------------------------------------------------------------------------
Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180
Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Work thank you very much :)
--
Med venlig hilsen / Best Regards
Lars Nielsen
Student developer at Steinwurf
lars(a)steinwurf.com
3290
days inactive
3295
days old
5 comments
3 participants
participants (3)
-
Bernd Broermann -
Jorick Astrego -
Lars Nielsen