Problem with adding more users - engine-manage-domains is missing
Hello, I am not really sure this is the right way to contact oVirt support or anything like that, but I would like to ask about something I have a problem with. I have my oVirt server up and running, virtualiaztion works fine, console is wokring and everything so the next logical step would be adding more users, because I am still stuck with admin user and nothing else. I've done my research and discovered you need to use engin-manage-domains to add extra domain which would host users for you and then you just load them in your oVirt enviroment and assign roles to them. However, on my server, nothing like engine-manage-domains exists, it only shows "command not found". I googled and found out that this service is automaticly isntalled when you install oVirt engine, but nothing like that happened on my server. I tried to reinstall, but the service is still missing. When installing, there are no fails or missing repositories. What are my options? Also, do I need another server for the storage of users or can it be running on the same IP as host and oVirt? Thank you very much i advance, Regards, Martin Kozl
On 11/29/2016 01:47 PM, Martin Kozl wrote:
Hello,
I am not really sure this is the right way to contact oVirt support or anything like that, but I would like to ask about something I have a problem with.
I have my oVirt server up and running, virtualiaztion works fine, console is wokring and everything so the next logical step would be adding more users, because I am still stuck with admin user and nothing else. I've done my research and discovered you need to use engin-manage-domains to add extra domain which would host users for you and then you just load them in your oVirt enviroment and assign roles to them. However, on my server, nothing like engine-manage-domains exists, it only shows "command not found". I googled and found out that this service is automaticly isntalled when you install oVirt engine, but nothing like that happened on my server. I tried to reinstall, but the service is still missing. When installing, there are no fails or missing repositories. What are my options? Also, do I need another server for the storage of users or can it be running on the same IP as host and oVirt?
engine-manage-domains has been depracated in 3.5 and completelly removed in 4.0. I was replaced by ovirt-engine-extension-aaa-ldap[1]. But you can also use ovirt-engine-extension-aaa-jdbc, which actually should full-fill your requirment to have it on same host. This is pre-installed extension, as @internal domain is using it by default. If you want to add more users to this extension you have to use tool named 'ovirt-aaa-jdbc-tool'. You should follow it's help: $ ovirt-aaa-jdbc-tool --help $ ovirt-aaa-jdbc-tool user --help $ ovirt-aaa-jdbc-tool user add --help $ ovirt-aaa-jdbc-tool user password-reset --help $ ovirt-aaa-jdbc-tool user add my_user $ ovirt-aaa-jdbc-tool user password-reset my_user --password-valid-to="2017-01-01 00:00:00Z" To get idea how to create new user. [1] https://github.com/oVirt/ovirt-engine-extension-aaa-ldap/blob/master/README
Thank you very much i advance,
Regards,
Martin Kozl
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Wed, Nov 30, 2016 at 12:02 PM, Ondra Machacek <omachace@redhat.com> wrote:
On 11/29/2016 01:47 PM, Martin Kozl wrote:
Hello,
I am not really sure this is the right way to contact oVirt support or anything like that, but I would like to ask about something I have a problem with.
I have my oVirt server up and running, virtualiaztion works fine, console is wokring and everything so the next logical step would be adding more users, because I am still stuck with admin user and nothing else. I've done my research and discovered you need to use engin-manage-domains to add extra domain which would host users for you and then you just load them in your oVirt enviroment and assign roles to them. However, on my server, nothing like engine-manage-domains exists, it only shows "command not found". I googled and found out that this service is automaticly isntalled when you install oVirt engine, but nothing like that happened on my server. I tried to reinstall, but the service is still missing. When installing, there are no fails or missing repositories. What are my options? Also, do I need another server for the storage of users or can it be running on the same IP as host and oVirt?
engine-manage-domains has been depracated in 3.5 and completelly removed in 4.0.
If in oVirt 4.0 you can refer also to similar steps as described here for RHEV and for adding "internal" local domain users, configure other local domains, or external providers (ldap, AD..): https://access.redhat.com/documentation/en/red-hat-virtualization/4.0/paged/... HIH, Gianluca
On Wed, Nov 30, 2016 at 12:05 PM, Gianluca Cecchi <gianluca.cecchi@gmail.com
wrote:
On Wed, Nov 30, 2016 at 12:02 PM, Ondra Machacek <omachace@redhat.com> wrote:
On 11/29/2016 01:47 PM, Martin Kozl wrote:
Hello,
I am not really sure this is the right way to contact oVirt support or anything like that, but I would like to ask about something I have a problem with.
I have my oVirt server up and running, virtualiaztion works fine, console is wokring and everything so the next logical step would be adding more users, because I am still stuck with admin user and nothing else. I've done my research and discovered you need to use engin-manage-domains to add extra domain which would host users for you and then you just load them in your oVirt enviroment and assign roles to them. However, on my server, nothing like engine-manage-domains exists, it only shows "command not found". I googled and found out that this service is automaticly isntalled when you install oVirt engine, but nothing like that happened on my server. I tried to reinstall, but the service is still missing. When installing, there are no fails or missing repositories. What are my options? Also, do I need another server for the storage of users or can it be running on the same IP as host and oVirt?
engine-manage-domains has been depracated in 3.5 and completelly removed in 4.0.
Here are detailed description and usage examples of ovirt-aaa-jdbc-tool: http://www.ovirt.org/develop/release-management/features/infra/aaa-jdbc/ If course it's possible define multiple profile server by aaa-jdbc so you don't to use internal for you users if you wish. Martin If in oVirt 4.0 you can refer also to similar steps as described here for
RHEV and for adding "internal" local domain users, configure other local domains, or external providers (ldap, AD..): https://access.redhat.com/documentation/en/red-hat- virtualization/4.0/paged/administration-guide/chapter-15-users-and-roles
HIH, Gianluca
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Thank you very much, this really helped, the old versions and tutorials confused me. Have a great day, Martin Kozl 2016-11-30 12:51 GMT+01:00 Martin Perina <mperina@redhat.com>:
On Wed, Nov 30, 2016 at 12:05 PM, Gianluca Cecchi < gianluca.cecchi@gmail.com> wrote:
On Wed, Nov 30, 2016 at 12:02 PM, Ondra Machacek <omachace@redhat.com> wrote:
On 11/29/2016 01:47 PM, Martin Kozl wrote:
Hello,
I am not really sure this is the right way to contact oVirt support or anything like that, but I would like to ask about something I have a problem with.
I have my oVirt server up and running, virtualiaztion works fine, console is wokring and everything so the next logical step would be adding more users, because I am still stuck with admin user and nothing else. I've done my research and discovered you need to use engin-manage-domains to add extra domain which would host users for you and then you just load them in your oVirt enviroment and assign roles to them. However, on my server, nothing like engine-manage-domains exists, it only shows "command not found". I googled and found out that this service is automaticly isntalled when you install oVirt engine, but nothing like that happened on my server. I tried to reinstall, but the service is still missing. When installing, there are no fails or missing repositories. What are my options? Also, do I need another server for the storage of users or can it be running on the same IP as host and oVirt?
engine-manage-domains has been depracated in 3.5 and completelly removed in 4.0.
Here are detailed description and usage examples of ovirt-aaa-jdbc-tool:
http://www.ovirt.org/develop/release-management/features/infra/aaa-jdbc/ If course it's possible define multiple profile server by aaa-jdbc so you don't to use internal for you users if you wish.
Martin
If in oVirt 4.0 you can refer also to similar steps as described here for
RHEV and for adding "internal" local domain users, configure other local domains, or external providers (ldap, AD..): https://access.redhat.com/documentation/en/red-hat-virtualiz ation/4.0/paged/administration-guide/chapter-15-users-and-roles
HIH, Gianluca
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (4)
-
Gianluca Cecchi -
Martin Kozl -
Martin Perina -
Ondra Machacek