9:02 a.m.
After upgrading ovirt-engine (new version:
ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
the user 'admin'. Here's my upgrade process:
yum remove ovirt-engine
yum install ovirt-engine
engine-setup and type the same password for 'admin' as before.
The setup script finished successfully. But I can't login with 'admin'
user. I tried to run engine-setup again, but it didn't help.
I also tried to change password with engine-config:
# engine-config -g AdminPassword
Failed to decrypt the current value
# engine-config -s AdminPassword=xxxxxxxx
'xxxxxxxx' is not a valid value for type Password.
It always complains it's not a valid value whatever I input.
Is there anyone hit problem before? And any idea about how to resolve it?
Thanks
9:04 a.m.
Mark,
Can you please provide engine logs here?
On 09/19/2012 09:02 AM, Mark Wu wrote:
After upgrading ovirt-engine (new version:
ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
the user 'admin'. Here's my upgrade process:
yum remove ovirt-engine
yum install ovirt-engine
engine-setup and type the same password for 'admin' as before.
The setup script finished successfully. But I can't login with 'admin'
user. I tried to run engine-setup again, but it didn't help.
I also tried to change password with engine-config:
# engine-config -g AdminPassword
Failed to decrypt the current value
# engine-config -s AdminPassword=xxxxxxxx
'xxxxxxxx' is not a valid value for type Password.
It always complains it's not a valid value whatever I input.
Is there anyone hit problem before? And any idea about how to resolve it?
Thanks
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:26 a.m.
On 09/19/2012 02:04 PM, Yair Zaslavsky wrote:
Mark,
Can you please provide engine logs here?
Yair,
Here's the related engine log:
2012-09-19 14:24:37,899 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-72) XML RPC error in command GetCapabilitiesVDS
( Vds: host2 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
2012-09-19 14:24:37,941 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-73) XML RPC error in command GetCapabilitiesVDS
( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
2012-09-19 14:24:38,637 ERROR
[org.ovirt.engine.core.bll.LoginAdminUserCommand]
(ajp--127.0.0.1-8009-10) USER_FAILED_TO_AUTHENTICATE : admin
2012-09-19 14:24:38,637 WARN
[org.ovirt.engine.core.bll.LoginAdminUserCommand]
(ajp--127.0.0.1-8009-10) CanDoAction of action LoginAdminUser failed.
Reasons:USER_FAILED_TO_AUTHENTICATE
2012-09-19 14:24:39,999 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-77) XML RPC error in command GetCapabilitiesVDS
( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
...
On 09/19/2012 09:02 AM, Mark Wu wrote:
>
> After upgrading ovirt-engine (new version:
> ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
> the user 'admin'. Here's my upgrade process:
> yum remove ovirt-engine
> yum install ovirt-engine
> engine-setup and type the same password for 'admin' as before.
>
> The setup script finished successfully. But I can't login with 'admin'
> user. I tried to run engine-setup again, but it didn't help.
>
> I also tried to change password with engine-config:
>
> # engine-config -g AdminPassword
> Failed to decrypt the current value
> # engine-config -s AdminPassword=xxxxxxxx
> 'xxxxxxxx' is not a valid value for type Password.
>
> It always complains it's not a valid value whatever I input.
>
> Is there anyone hit problem before? And any idea about how to
> resolve it?
> Thanks
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
9:48 a.m.
Not sure how much it is informative in this case.
What also bothers me is that you got "failed to decrypt" when you used
engine-config -g
When you start the jboss server, and look at the engine.log and
server.log, do you see some prints with "failed to decrypt"?
On 09/19/2012 09:26 AM, Mark Wu wrote:
On 09/19/2012 02:04 PM, Yair Zaslavsky wrote:
> Mark,
> Can you please provide engine logs here?
>
Yair,
Here's the related engine log:
2012-09-19 14:24:37,899 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-72) XML RPC error in command GetCapabilitiesVDS
( Vds: host2 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
2012-09-19 14:24:37,941 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-73) XML RPC error in command GetCapabilitiesVDS
( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
2012-09-19 14:24:38,637 ERROR
[org.ovirt.engine.core.bll.LoginAdminUserCommand]
(ajp--127.0.0.1-8009-10) USER_FAILED_TO_AUTHENTICATE : admin
2012-09-19 14:24:38,637 WARN
[org.ovirt.engine.core.bll.LoginAdminUserCommand]
(ajp--127.0.0.1-8009-10) CanDoAction of action LoginAdminUser failed.
Reasons:USER_FAILED_TO_AUTHENTICATE
2012-09-19 14:24:39,999 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
(QuartzScheduler_Worker-77) XML RPC error in command GetCapabilitiesVDS
( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
java.lang.reflect.InvocationTargetException,
SunCertPathBuilderException: unable to find valid certification path to
requested target
...
>
>
> On 09/19/2012 09:02 AM, Mark Wu wrote:
>>
>> After upgrading ovirt-engine (new version:
>> ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
>> the user 'admin'. Here's my upgrade process:
>> yum remove ovirt-engine
>> yum install ovirt-engine
>> engine-setup and type the same password for 'admin' as before.
>>
>> The setup script finished successfully. But I can't login with
'admin'
>> user. I tried to run engine-setup again, but it didn't help.
>>
>> I also tried to change password with engine-config:
>>
>> # engine-config -g AdminPassword
>> Failed to decrypt the current value
>> # engine-config -s AdminPassword=xxxxxxxx
>> 'xxxxxxxx' is not a valid value for type Password.
>>
>> It always complains it's not a valid value whatever I input.
>>
>> Is there anyone hit problem before? And any idea about how to
>> resolve it?
>> Thanks
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
9:58 a.m.
On 09/19/2012 02:48 PM, Yair Zaslavsky wrote:
Not sure how much it is informative in this case.
What also bothers me is that you got "failed to decrypt" when you used
engine-config -g
When you start the jboss server, and look at the engine.log and
server.log, do you see some prints with "failed to decrypt"?
This time is more informative:
2012-09-19 14:54:21,465 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service
thread 1-6) Failed to decrypt Data must start with zero
2012-09-19 14:54:21,465 ERROR
[org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service
thread 1-6) Failed to decrypt value for property TruststorePass will be
used encrypted value
2012-09-19 14:54:21,487 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service
thread 1-6) Failed to decrypt Data must start with zero
2012-09-19 14:54:21,487 ERROR
[org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service
thread 1-6) Failed to decrypt value for property CertificatePassword
will be used encrypted value
2012-09-19 14:54:21,497 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service
thread 1-6) Failed to decrypt Data must start with zero
2012-09-19 14:54:21,498 ERROR
[org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service
thread 1-6) Failed to decrypt value for property LocalAdminPassword will
be used encrypted value
2012-09-19 14:54:21,509 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service
thread 1-6) Failed to decrypt Data must start with zero
2012-09-19 14:54:21,510 ERROR
[org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service
thread 1-6) Failed to decrypt value for property AdminPassword will be
used encrypted value
2012-09-19 14:54:21,514 ERROR
[org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service
thread 1-6) Could not parse option AutoRecoveryAllowedTypes value.
On 09/19/2012 09:26 AM, Mark Wu wrote:
> On 09/19/2012 02:04 PM, Yair Zaslavsky wrote:
>> Mark,
>> Can you please provide engine logs here?
>>
> Yair,
>
> Here's the related engine log:
>
> 2012-09-19 14:24:37,899 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-72) XML RPC error in command GetCapabilitiesVDS
> ( Vds: host2 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> 2012-09-19 14:24:37,941 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-73) XML RPC error in command GetCapabilitiesVDS
> ( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> 2012-09-19 14:24:38,637 ERROR
> [org.ovirt.engine.core.bll.LoginAdminUserCommand]
> (ajp--127.0.0.1-8009-10) USER_FAILED_TO_AUTHENTICATE : admin
> 2012-09-19 14:24:38,637 WARN
> [org.ovirt.engine.core.bll.LoginAdminUserCommand]
> (ajp--127.0.0.1-8009-10) CanDoAction of action LoginAdminUser failed.
> Reasons:USER_FAILED_TO_AUTHENTICATE
> 2012-09-19 14:24:39,999 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-77) XML RPC error in command GetCapabilitiesVDS
> ( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> ...
>>
>>
>> On 09/19/2012 09:02 AM, Mark Wu wrote:
>>>
>>> After upgrading ovirt-engine (new version:
>>> ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
>>> the user 'admin'. Here's my upgrade process:
>>> yum remove ovirt-engine
>>> yum install ovirt-engine
>>> engine-setup and type the same password for 'admin' as before.
>>>
>>> The setup script finished successfully. But I can't login with
'admin'
>>> user. I tried to run engine-setup again, but it didn't help.
>>>
>>> I also tried to change password with engine-config:
>>>
>>> # engine-config -g AdminPassword
>>> Failed to decrypt the current value
>>> # engine-config -s AdminPassword=xxxxxxxx
>>> 'xxxxxxxx' is not a valid value for type Password.
>>>
>>> It always complains it's not a valid value whatever I input.
>>>
>>> Is there anyone hit problem before? And any idea about how to
>>> resolve it?
>>> Thanks
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
8:57 a.m.
Yair,
After running engine-cleanup and then engine-setup, the problem
disappeared. I don't know what happened. Anyway, thanks for your help!
Mark
On 09/19/2012 02:48 PM, Yair Zaslavsky wrote:
Not sure how much it is informative in this case.
What also bothers me is that you got "failed to decrypt" when you used
engine-config -g
When you start the jboss server, and look at the engine.log and
server.log, do you see some prints with "failed to decrypt"?
On 09/19/2012 09:26 AM, Mark Wu wrote:
> On 09/19/2012 02:04 PM, Yair Zaslavsky wrote:
>> Mark,
>> Can you please provide engine logs here?
>>
> Yair,
>
> Here's the related engine log:
>
> 2012-09-19 14:24:37,899 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-72) XML RPC error in command GetCapabilitiesVDS
> ( Vds: host2 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> 2012-09-19 14:24:37,941 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-73) XML RPC error in command GetCapabilitiesVDS
> ( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> 2012-09-19 14:24:38,637 ERROR
> [org.ovirt.engine.core.bll.LoginAdminUserCommand]
> (ajp--127.0.0.1-8009-10) USER_FAILED_TO_AUTHENTICATE : admin
> 2012-09-19 14:24:38,637 WARN
> [org.ovirt.engine.core.bll.LoginAdminUserCommand]
> (ajp--127.0.0.1-8009-10) CanDoAction of action LoginAdminUser failed.
> Reasons:USER_FAILED_TO_AUTHENTICATE
> 2012-09-19 14:24:39,999 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
> (QuartzScheduler_Worker-77) XML RPC error in command GetCapabilitiesVDS
> ( Vds: Host1 ), the error was: java.util.concurrent.ExecutionException:
> java.lang.reflect.InvocationTargetException,
> SunCertPathBuilderException: unable to find valid certification path to
> requested target
> ...
>>
>>
>> On 09/19/2012 09:02 AM, Mark Wu wrote:
>>>
>>> After upgrading ovirt-engine (new version:
>>> ovirt-engine-3.1.0-3.1345126685.git7649eed.fc17), I can't login with
>>> the user 'admin'. Here's my upgrade process:
>>> yum remove ovirt-engine
>>> yum install ovirt-engine
>>> engine-setup and type the same password for 'admin' as before.
>>>
>>> The setup script finished successfully. But I can't login with
'admin'
>>> user. I tried to run engine-setup again, but it didn't help.
>>>
>>> I also tried to change password with engine-config:
>>>
>>> # engine-config -g AdminPassword
>>> Failed to decrypt the current value
>>> # engine-config -s AdminPassword=xxxxxxxx
>>> 'xxxxxxxx' is not a valid value for type Password.
>>>
>>> It always complains it's not a valid value whatever I input.
>>>
>>> Is there anyone hit problem before? And any idea about how to
>>> resolve it?
>>> Thanks
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
4493
days inactive
4495
days old
5 comments
2 participants
participants (2)
-
Mark Wu -
Yair Zaslavsky