Re: VM console does not work with new cluster.
Are you using IP or dns? Has the IP changed? Host IP? Vm id? It sounds like virt viewer cannot find it's target. Connecting with spice or vnc? What do your logs say about the connection? Look at event viewer after a try and see what's in the application log. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier@fujitsu.com <Matthew.Stier@fujitsu.com> Sent: Tuesday, January 12, 2021 1:08 PM To: eevans@digitaldatatechs.com; 'Strahil Nikolov' <hunter86_bg@yahoo.com>; users@ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Stop/Edit/Start is the only mechanism available. You cannot change the cluster value for a VM, until it is stopped. The VMs have static addresses. The VM is fully function on the new cluster. It’s just that once the VM has been moved to the new cluster, selecting console results in the same behavior, but that virt-viewer starts and stops within a second. -----Original Message----- From: eevans@digitaldatatechs.com <eevans@digitaldatatechs.com> Sent: Tuesday, January 12, 2021 11:40 AM To: Stier, Matthew <Matthew.Stier@fujitsu.com>; 'Strahil Nikolov' <hunter86_bg@yahoo.com>; users@ovirt.org Subject: RE: [ovirt-users] Re: VM console does not work with new cluster. Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier@fujitsu.com <Matthew.Stier@fujitsu.com> Sent: Tuesday, January 12, 2021 12:29 PM To: Strahil Nikolov <hunter86_bg@yahoo.com>; users@ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted. -----Original Message----- From: Strahil Nikolov <hunter86_bg@yahoo.com> Sent: Sunday, January 10, 2021 10:57 PM To: users@ovirt.org; Stier, Matthew <Matthew.Stier@fujitsu.com> Subject: Re: [ovirt-users] VM console does not work with new cluster. This sounds like firewall issue. Best Regards, Strahil Nikolov В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier@fujitsu.com> написа: I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two'). I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access. I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months) I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts. The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.) Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls. Apparently I'm missing something. _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL5... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANLS... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RFYNLB53ALNITF...
Both IP and DNS name cannot be connected. Both using VNC, the windows program is remote viewer. I using netstat to trace, I found that at the begin the remote viewer estab a tcp connection to VM's host's 5900 port, but soon the connection disconnect. On the host, the qemu process listen on 5900 port, where to find the qemu's log for the connection ? -----Original Message----- From: users-bounces@ovirt.org <users-bounces@ovirt.org> On Behalf Of eevans@digitaldatatechs.com Sent: Wednesday, January 13, 2021 6:46 AM To: Matthew.Stier@fujitsu.com; 'Strahil Nikolov' <hunter86_bg@yahoo.com>; users@ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Are you using IP or dns? Has the IP changed? Host IP? Vm id? It sounds like virt viewer cannot find it's target. Connecting with spice or vnc? What do your logs say about the connection? Look at event viewer after a try and see what's in the application log. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier@fujitsu.com <Matthew.Stier@fujitsu.com> Sent: Tuesday, January 12, 2021 1:08 PM To: eevans@digitaldatatechs.com; 'Strahil Nikolov' <hunter86_bg@yahoo.com>; users@ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Stop/Edit/Start is the only mechanism available. You cannot change the cluster value for a VM, until it is stopped. The VMs have static addresses. The VM is fully function on the new cluster. It’s just that once the VM has been moved to the new cluster, selecting console results in the same behavior, but that virt-viewer starts and stops within a second. -----Original Message----- From: eevans@digitaldatatechs.com <eevans@digitaldatatechs.com> Sent: Tuesday, January 12, 2021 11:40 AM To: Stier, Matthew <Matthew.Stier@fujitsu.com>; 'Strahil Nikolov' <hunter86_bg@yahoo.com>; users@ovirt.org Subject: RE: [ovirt-users] Re: VM console does not work with new cluster. Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier@fujitsu.com <Matthew.Stier@fujitsu.com> Sent: Tuesday, January 12, 2021 12:29 PM To: Strahil Nikolov <hunter86_bg@yahoo.com>; users@ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted. -----Original Message----- From: Strahil Nikolov <hunter86_bg@yahoo.com> Sent: Sunday, January 10, 2021 10:57 PM To: users@ovirt.org; Stier, Matthew <Matthew.Stier@fujitsu.com> Subject: Re: [ovirt-users] VM console does not work with new cluster. This sounds like firewall issue. Best Regards, Strahil Nikolov В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier@fujitsu.com> написа: I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two'). I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access. I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months) I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts. The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.) Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls. Apparently I'm missing something. _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL5... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANLS... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RFYNLB53ALNITF... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NWGE3UALUOD772...
participants (2)
-
eevans＠digitaldatatechs.com -
tommy