From: "Simone Tiraboschi" <stirabos(a)redhat.com&gt; To: "John Florian" <jflorian(a)doubledog.org&gt; Cc: users(a)ovirt.org Sent: Monday, March 9, 2015 10:30:36 AM Subject: Re: [ovirt-users] Troubles starting hosted engine ----- Original Message ----- > From: "John Florian" <jflorian(a)doubledog.org&gt; > To: users(a)ovirt.org > Sent: Sunday, March 8, 2015 9:37:39 PM > Subject: [ovirt-users] Troubles starting hosted engine > > I have lots of extra fun bringing up my hosted engine right now due to > two issues. > > First, either during the hosted-engine --deploy or engine-setup (I can't > remember) I was prompted for the IP address of my gateway. Since then > that address has changed. I'm unable to start the engine VM if that > address isn't reachable so my temporary workaround is to add this old > address onto the current gateway. How/where do I change things so that > this old address can be truly retired? It's written in /etc/ovirt-hosted-engine/hosted-engine.conf If you deployed more than one host, you need to explicitly fix it on each of them. > My second issue might be harder. Again during the setup I was prompted > for a location of an ISO file for installing the engine's OS. That > location is served by NFS and is auto-mounted by /etc/fstab (and > systemd). Here's the hitch: my NFS server is now a VM in my cluster. > :-) Since I only have a single hypervisor host right now that ISO isn't > reachable when I'm trying to start my engine VM so that I can also start > the VM that provides the NFS share. I'm getting away with evil right > now by touching an empty file at the same path, which gets obscured once > the NFS share is mounted, but it's enough. You need that ISO file just to install the OS when you create the engine VM on the first host: you don't need a shared domain for that. So my suggestion is just to copy that ISO image on the first host and use it locally. You can destroy it when the setup is done. > It's not at all clear to me how I'm supposed to edit things for my > hosted engine setup.