"Setup Host Networks" fails (was: Ovirt 4 failing to setup CentOS 7.2 host (everything default))
On Tue, Jan 31, 2017 at 9:43 AM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
I could SSH into it, because (as per supervdsm log) the original network config was restored.
Engine and host are in completely different continents (America, Europe)
I cleared both engine.log and host logs. Went into Ovirt GUI and ‘Setup Host Networks and dragged ovirtmgmt in my GUI to bind with the main ethernet adapter.
As always, the console freezes (as network connection is lost after those retries and the original config is restored).
engine.log http://pastebin.com/kT6WSq2W
and host-deploy doesn’t add any extra info. I guess it’s because I am actually not deploying the host, but rather doing ‘Setup Host Networks’ attachment of ‘ovirtmgmt’?
OK. Re-adding Eduard and changing subject. Best,
Thanks so much for replying.
On Jan 31, 2017, at 9:28 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
On Mon, Jan 30, 2017 at 6:05 PM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
Hey guys,
Trying to setup a new Ovirt Engine + a separate CentOS 7.2 based Host. After adding the host, SSH freezes (possibly due to the log below), then the GUI just displays ‘Non Operational’.
Please note that following CentOS 7.3 release, 7.2 is not supported anymore. Latest qemu-kvm-ev 2.6 requires CentOS 7.3.
[root@CentOS-73-64-minimal ~]# cat /etc/centos-release CentOS Linux release 7.3.1611 (Core) [root@CentOS-73-64-minimal ~]#
It was 7.3 after all, not 7.2. Sorry.
The engine is running in Hetzner DC which allows for only MAC based routing, but I don’t think this part of the setup is connected. I heard people having issues routing additional IP pools.
Here’s the supervdsm.log from the host server.
What am I missing here? It’s been a long long day. Thanks. Eid
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Didi
On Jan 31, 2017, at 11:06 AM, Yedidyah Bar David <didi@redhat.com> = wrote: =20 On Tue, Jan 31, 2017 at 9:43 AM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
I could SSH into it, because (as per supervdsm log) the original = network config was restored. =20 Engine and host are in completely different continents (America, = Europe) =20 =20 =20 I cleared both engine.log and host logs. Went into Ovirt GUI and = =E2=80=98Setup Host Networks and dragged ovirtmgmt in my GUI to bind with the main ethernet = adapter. =20 As always, the console freezes (as network connection is lost after =
retries and the original config is restored). =20 engine.log http://pastebin.com/kT6WSq2W =20 and host-deploy doesn=E2=80=99t add any extra info. I guess it=E2=80=99= s because I am actually not deploying the host, but rather doing =E2=80=98Setup Host = Networks=E2=80=99 attachment of =E2=80=98ovirtmgmt=E2=80=99? =20 OK. Re-adding Eduard and changing subject. Best, =20 =20 =20 Thanks so much for replying. =20 =20 =20 On Jan 31, 2017, at 9:28 AM, Sandro Bonazzola <sbonazzo@redhat.com> = wrote: =20 =20 =20 On Mon, Jan 30, 2017 at 6:05 PM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
=20 Hey guys, =20 Trying to setup a new Ovirt Engine + a separate CentOS 7.2 based = Host. After adding the host, SSH freezes (possibly due to the log below), =
--Apple-Mail=_6F10C65B-BD7C-4225-AA2A-C82DDCD189B1 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 Thank you for tidying up the thread. Never used these mailing lists (at = all on any platform), so I am trying to minimize damage ;). Here are some additional logs from the host. (upon using Setup Host = Networks). ########### messages . Jan 31 10:44:28 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down Jan 31 10:44:29 CentOS-73-64-minimal systemd: Started /usr/sbin/ifup = enp4s0. Jan 31 10:44:29 CentOS-73-64-minimal systemd: Starting /usr/sbin/ifup = enp4s0. Jan 31 10:44:29 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): = enp4s0: link is not ready Jan 31 10:44:29 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW = filter on device enp4s0 Jan 31 10:44:33 CentOS-73-64-minimal daemonAdapter: libvirt: Network = Driver error : Network not found: no network with matching name = 'vdsm-ovirtmgmt' Jan 31 10:44:33 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 10:44:33 CentOS-73-64-minimal kernel: IPv6: = ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready Jan 31 10:46:34 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down Jan 31 10:46:34 CentOS-73-64-minimal systemd: Started /usr/sbin/ifup = enp4s0. Jan 31 10:46:34 CentOS-73-64-minimal systemd: Starting /usr/sbin/ifup = enp4s0. Jan 31 10:46:34 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): = enp4s0: link is not ready Jan 31 10:46:34 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW = filter on device enp4s0 Jan 31 10:46:38 CentOS-73-64-minimal journal: vdsm vds ERROR = connectivity check failed#012Traceback (most recent call last):#012 = File "/usr/share/vdsm/API.py", line 1473, in setupNetworks#012 = supervdsm.getProxy().setupNetworks(networks, bondings, options)#012 = File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 53, in = __call__#012 return callMethod()#012 File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in = <lambda>#012 **kwargs)#012 File "<string>", line 2, in = setupNetworks#012 File = "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in = _callmethod#012 raise convert_to_error(kind, = result)#012ConfigNetworkError: (10, 'connectivity check failed') Jan 31 10:46:39 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 10:46:39 CentOS-73-64-minimal kernel: IPv6: = ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready ######## journalctl Jan 31 11:05:07 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down Jan 31 11:05:07 CentOS-73-64-minimal systemd[1]: Started /usr/sbin/ifup = enp4s0. Jan 31 11:05:07 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup = enp4s0. Jan 31 11:05:07 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): = enp4s0: link is not ready Jan 31 11:05:07 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW = filter on device enp4s0 Jan 31 11:05:11 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 11:05:11 CentOS-73-64-minimal kernel: IPv6: = ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready Jan 31 11:05:11 CentOS-73-64-minimal daemonAdapter[11064]: libvirt: = Network Driver error : Network not found: no network with matching name = 'vdsm-ovirtmgmt' Jan 31 11:07:12 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down Jan 31 11:07:12 CentOS-73-64-minimal systemd[1]: Started /usr/sbin/ifup = enp4s0. Jan 31 11:07:12 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup = enp4s0. Jan 31 11:07:12 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): = enp4s0: link is not ready Jan 31 11:07:12 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW = filter on device enp4s0 Jan 31 11:07:16 CentOS-73-64-minimal vdsm[11340]: vdsm vds ERROR = connectivity check failed Traceback (most recent = call last): File = "/usr/share/vdsm/API.py", line 1473, in setupNetworks = supervdsm.getProxy().setupNetworks(networks, bondings, options) File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 53, in = __call__ return = callMethod() File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in = <lambda> **kwargs) File "<string>", = line 2, in setupNetworks File = "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in = _callmethod raise = convert_to_error(kind, result) ConfigNetworkError: = (10, 'connectivity check failed') Jan 31 11:07:17 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 11:07:17 CentOS-73-64-minimal kernel: IPv6: = ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready those then the
GUI just displays =E2=80=98Non Operational=E2=80=99. =20 =20 Please note that following CentOS 7.3 release, 7.2 is not supported = anymore. Latest qemu-kvm-ev 2.6 requires CentOS 7.3. =20 =20 =20 [root@CentOS-73-64-minimal ~]# cat /etc/centos-release CentOS Linux release 7.3.1611 (Core) [root@CentOS-73-64-minimal ~]# =20 It was 7.3 after all, not 7.2. Sorry. =20 =20 =20 The engine is running in Hetzner DC which allows for only MAC based routing, but I don=E2=80=99t think this part of the setup is = connected. I heard people having issues routing additional IP pools. =20 Here=E2=80=99s the supervdsm.log from the host server. =20 http://pastebin.com/irfShv9n =20 What am I missing here? It=E2=80=99s been a long long day. Thanks. Eid =20 =20 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users =20 =20 =20 =20 -- Sandro Bonazzola Better technology. Faster innovation. Powered by community =
collaboration. >> See how it works at redhat.com >>=20 >>=20 >>=20 >> _______________________________________________ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >>=20 >=20 >=20 >=20 > --=20 > Didi
--Apple-Mail=_6F10C65B-BD7C-4225-AA2A-C82DDCD189B1 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=utf-8 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" = class=3D"">Thank you for tidying up the thread. Never used these mailing = lists (at all on any platform), so I am trying to minimize damage = ;).<div class=3D""><br class=3D""></div><div class=3D"">Here are some = additional logs from the host. (upon using Setup Host Networks).<br = class=3D""><div class=3D""><br class=3D""></div><div class=3D""><div = style=3D"margin: 0px; line-height: normal;" class=3D"">########### = messages</div><div style=3D"margin: 0px; font-size: 11px; line-height: = normal; font-family: Menlo; background-color: rgb(255, 255, 255);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">.</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:44:28 CentOS-73-64-minimal = kernel: e1000e: enp4s0 NIC Link is Down</span></div><div style=3D"margin: = 0px; font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:44:29 CentOS-73-64-minimal systemd: Started /usr/sbin/ifup = enp4s0.</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:44:29 CentOS-73-64-minimal = systemd: Starting /usr/sbin/ifup enp4s0.</span></div><div style=3D"margin:= 0px; font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:44:29 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: = link is not ready</span></div><div style=3D"margin: 0px; font-size: = 11px; line-height: normal; font-family: Menlo; background-color: = rgb(255, 255, 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:44:29 CentOS-73-64-minimal = kernel: 8021q: adding VLAN 0 to HW filter on device = enp4s0</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:44:33 CentOS-73-64-minimal = daemonAdapter: libvirt: Network Driver error : Network not found: no = network with matching name 'vdsm-ovirtmgmt'</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:44:33 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Up 1000 = Mbps Full Duplex, Flow Control: Rx/Tx</span></div><div style=3D"margin: = 0px; font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:44:33 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_CHANGE): = enp4s0: link becomes ready</span></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:46:34 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:34 CentOS-73-64-minimal = systemd: Started /usr/sbin/ifup enp4s0.</span></div><div style=3D"margin: = 0px; font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 10:46:34 CentOS-73-64-minimal systemd: Starting /usr/sbin/ifup = enp4s0.</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:34 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not = ready</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:34 CentOS-73-64-minimal = kernel: 8021q: adding VLAN 0 to HW filter on device = enp4s0</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:38 CentOS-73-64-minimal = journal: vdsm vds ERROR connectivity check failed#012Traceback (most = recent call last):#012 File "/usr/share/vdsm/API.py", line 1473, = in setupNetworks#012 = supervdsm.getProxy().setupNetworks(networks, bondings, = options)#012 File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 53, in = __call__#012 return callMethod()#012 File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in = <lambda>#012 **kwargs)#012 File = "<string>", line 2, in setupNetworks#012 File = "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in = _callmethod#012 raise convert_to_error(kind, = result)#012ConfigNetworkError: (10, 'connectivity check = failed')</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:39 CentOS-73-64-minimal = kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow = Control: Rx/Tx</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 10:46:39 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes = ready</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255); min-height: 13px;" class=3D""><span style=3D"font-variant-ligatures:= no-common-ligatures" class=3D""></span><br class=3D""></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255); min-height: 13px;" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255); min-height: 13px;" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255); min-height: 13px;" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255); min-height: 13px;" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255); min-height: 13px;" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255); min-height: 13px;" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""></span><br class=3D""></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">######## = journalctl</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255); min-height: 13px;" class=3D""><span style=3D"font-variant-ligatures:= no-common-ligatures" class=3D""></span><br class=3D""></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 11:05:07 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:07 CentOS-73-64-minimal = systemd[1]: Started /usr/sbin/ifup enp4s0.</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 11:05:07 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup = enp4s0.</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:07 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not = ready</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:07 CentOS-73-64-minimal = kernel: 8021q: adding VLAN 0 to HW filter on device = enp4s0</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:11 CentOS-73-64-minimal = kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow = Control: Rx/Tx</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:11 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes = ready</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:05:11 CentOS-73-64-minimal = daemonAdapter[11064]: libvirt: Network Driver error : Network not found: = no network with matching name 'vdsm-ovirtmgmt'</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 11:07:12 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is = Down</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:12 CentOS-73-64-minimal = systemd[1]: Started /usr/sbin/ifup enp4s0.</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Jan 31 = 11:07:12 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup = enp4s0.</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:12 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not = ready</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:12 CentOS-73-64-minimal = kernel: 8021q: adding VLAN 0 to HW filter on device = enp4s0</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:16 CentOS-73-64-minimal = vdsm[11340]: vdsm vds ERROR connectivity check failed</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> = = = Traceback (most recent call = last):</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = File "/usr/share/vdsm/API.py", line 1473, in = setupNetworks</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = supervdsm.getProxy().setupNetworks(networks, bondings, = options)</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line = 53, in __call__</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = return callMethod()</span></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> = = = File = "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in = <lambda></span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = **kwargs)</span></div><div style=3D"margin: 0px; = font-size: 11px; line-height: normal; font-family: Menlo; = background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> = = = File "<string>", line 2, in = setupNetworks</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = File "/usr/lib64/python2.7/multiprocessing/managers.py", line = 773, in _callmethod</span></div><div style=3D"margin: 0px; font-size: = 11px; line-height: normal; font-family: Menlo; background-color: = rgb(255, 255, 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D""> = = = raise convert_to_error(kind, result)</span></div><div = style=3D"margin: 0px; font-size: 11px; line-height: normal; font-family: = Menlo; background-color: rgb(255, 255, 255);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D""> = = = ConfigNetworkError: (10, 'connectivity check = failed')</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:17 CentOS-73-64-minimal = kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow = Control: Rx/Tx</span></div><div style=3D"margin: 0px; font-size: 11px; = line-height: normal; font-family: Menlo; background-color: rgb(255, 255, = 255);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">Jan 31 11:07:17 CentOS-73-64-minimal = kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes = ready</span></div></div><div class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D""><br = class=3D""></span></div><div class=3D""><br class=3D""></div><div = class=3D""><br class=3D""></div><div class=3D""><br = class=3D""><div><blockquote type=3D"cite" class=3D""><div class=3D"">On = Jan 31, 2017, at 11:06 AM, Yedidyah Bar David <<a = href=3D"mailto:didi@redhat.com" class=3D"">didi@redhat.com</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><div class=3D""><div = class=3D"">On Tue, Jan 31, 2017 at 9:43 AM, Eidmantas Ivanauskas<br = class=3D""><<a href=3D"mailto:eidmantasivanauskas@gmail.com" = class=3D"">eidmantasivanauskas@gmail.com</a>> wrote:<br = class=3D""><blockquote type=3D"cite" class=3D"">I could SSH into it, = because (as per supervdsm log) the original network<br class=3D"">config = was restored.<br class=3D""><br class=3D"">Engine and host are in = completely different continents (America, Europe)<br class=3D""><br = class=3D""><br class=3D""><br class=3D"">I cleared both engine.log and = host logs. Went into Ovirt GUI and =E2=80=98Setup Host<br = class=3D"">Networks<br class=3D""> and dragged ovirtmgmt in = my GUI to bind with the main ethernet adapter.<br class=3D""><br = class=3D"">As always, the console freezes (as network connection is lost = after those<br class=3D"">retries and the original config is = restored).<br class=3D""><br class=3D"">engine.log<br class=3D""><a = href=3D"http://pastebin.com/kT6WSq2W" = class=3D"">http://pastebin.com/kT6WSq2W</a><br class=3D""><br = class=3D"">and host-deploy doesn=E2=80=99t add any extra info. I guess = it=E2=80=99s because I am<br class=3D"">actually not deploying the host, = but rather doing =E2=80=98Setup Host Networks=E2=80=99<br = class=3D"">attachment of =E2=80=98ovirtmgmt=E2=80=99?<br = class=3D""></blockquote><br class=3D"">OK. Re-adding Eduard and changing = subject. Best,<br class=3D""><br class=3D""><blockquote type=3D"cite" = class=3D""><br class=3D""><br class=3D"">Thanks so much for replying.<br = class=3D""><br class=3D""><br class=3D""><br class=3D"">On Jan 31, 2017, = at 9:28 AM, Sandro Bonazzola <<a href=3D"mailto:sbonazzo@redhat.com" = class=3D"">sbonazzo@redhat.com</a>> wrote:<br class=3D""><br = class=3D""><br class=3D""><br class=3D"">On Mon, Jan 30, 2017 at 6:05 = PM, Eidmantas Ivanauskas<br class=3D""><<a = href=3D"mailto:eidmantasivanauskas@gmail.com" = class=3D"">eidmantasivanauskas@gmail.com</a>> wrote:<br = class=3D""><blockquote type=3D"cite" class=3D""><br class=3D"">Hey = guys,<br class=3D""><br class=3D"">Trying to setup a new Ovirt Engine + = a separate CentOS 7.2 based Host.<br class=3D"">After adding the host, = SSH freezes (possibly due to the log below), then the<br class=3D"">GUI = just displays =E2=80=98Non Operational=E2=80=99.<br = class=3D""></blockquote><br class=3D""><br class=3D"">Please note that = following CentOS 7.3 release, 7.2 is not supported anymore.<br = class=3D"">Latest qemu-kvm-ev 2.6 requires CentOS 7.3.<br class=3D""><br = class=3D""><br class=3D""><br class=3D"">[root@CentOS-73-64-minimal ~]# = cat /etc/centos-release<br class=3D"">CentOS Linux release 7.3.1611 = (Core)<br class=3D"">[root@CentOS-73-64-minimal ~]#<br class=3D""><br = class=3D"">It was 7.3 after all, not 7.2. Sorry.<br class=3D""><br = class=3D""><br class=3D""><blockquote type=3D"cite" class=3D""><br = class=3D"">The engine is running in Hetzner DC which allows for only MAC = based<br class=3D"">routing, but I don=E2=80=99t think this part of the = setup is connected. I heard<br class=3D"">people having issues routing = additional IP pools.<br class=3D""><br class=3D"">Here=E2=80=99s the = supervdsm.log from the host server.<br class=3D""><br class=3D""><a = href=3D"http://pastebin.com/irfShv9n" = class=3D"">http://pastebin.com/irfShv9n</a><br class=3D""><br = class=3D"">What am I missing here? It=E2=80=99s been a long long day.<br = class=3D"">Thanks.<br class=3D"">Eid<br class=3D""><br class=3D""><br = class=3D"">_______________________________________________<br = class=3D"">Users mailing list<br class=3D"">Users@ovirt.org<br = class=3D"">http://lists.ovirt.org/mailman/listinfo/users<br class=3D""><br= class=3D""></blockquote><br class=3D""><br class=3D""><br = class=3D"">--<br class=3D"">Sandro Bonazzola<br class=3D"">Better = technology. Faster innovation. Powered by community collaboration.<br = class=3D"">See how it works at <a href=3D"http://redhat.com" = class=3D"">redhat.com</a><br class=3D""><br class=3D""><br class=3D""><br = class=3D"">_______________________________________________<br = class=3D"">Users mailing list<br class=3D""><a = href=3D"mailto:Users@ovirt.org" class=3D"">Users@ovirt.org</a><br = class=3D"">http://lists.ovirt.org/mailman/listinfo/users<br class=3D""><br= class=3D""></blockquote><br class=3D""><br class=3D""><br class=3D"">-- = <br class=3D"">Didi<br class=3D""></div></div></blockquote></div><br = class=3D""></div></div></body></html>= --Apple-Mail=_6F10C65B-BD7C-4225-AA2A-C82DDCD189B1--
The server seems to have a special network configuration that limits its communication to the Gateway through SCOPE definition. IPADDR=176.9.146.137 NETMASK=255.255.255.255 SCOPE="peer 176.9.146.129" oVirt host does not support such a setup. VDSM acquires the iface and tries to configure it based on the existing values, ignoring the SCOPE. It ends up with a full mask set and lost of connectivity. Please set your server with a 'regular' ip/mask/gateway settings. If you want to keep the limitations of SCOPE, you can set some firewall rules instead. Thanks, Edy. On Tue, Jan 31, 2017 at 1:19 PM, Eidmantas Ivanauskas < eidmantasivanauskas@gmail.com> wrote:
Thank you for tidying up the thread. Never used these mailing lists (at all on any platform), so I am trying to minimize damage ;).
Here are some additional logs from the host. (upon using Setup Host Networks).
########### messages . Jan 31 10:44:28 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Down Jan 31 10:44:29 CentOS-73-64-minimal systemd: Started /usr/sbin/ifup enp4s0. Jan 31 10:44:29 CentOS-73-64-minimal systemd: Starting /usr/sbin/ifup enp4s0. Jan 31 10:44:29 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready Jan 31 10:44:29 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW filter on device enp4s0 Jan 31 10:44:33 CentOS-73-64-minimal daemonAdapter: libvirt: Network Driver error : Network not found: no network with matching name 'vdsm-ovirtmgmt' Jan 31 10:44:33 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 10:44:33 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready Jan 31 10:46:34 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Down Jan 31 10:46:34 CentOS-73-64-minimal systemd: Started /usr/sbin/ifup enp4s0. Jan 31 10:46:34 CentOS-73-64-minimal systemd: Starting /usr/sbin/ifup enp4s0. Jan 31 10:46:34 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready Jan 31 10:46:34 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW filter on device enp4s0 Jan 31 10:46:38 CentOS-73-64-minimal journal: vdsm vds ERROR connectivity check failed#012Traceback (most recent call last):#012 File "/usr/share/vdsm/API.py", line 1473, in setupNetworks#012 supervdsm.getProxy().setupNetworks(networks, bondings, options)#012 File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 53, in __call__#012 return callMethod()#012 File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in <lambda>#012 **kwargs)#012 File "<string>", line 2, in setupNetworks#012 File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod#012 raise convert_to_error(kind, result)#012ConfigNetworkError: (10, 'connectivity check failed') Jan 31 10:46:39 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 10:46:39 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
######## journalctl
Jan 31 11:05:07 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Down Jan 31 11:05:07 CentOS-73-64-minimal systemd[1]: Started /usr/sbin/ifup enp4s0. Jan 31 11:05:07 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup enp4s0. Jan 31 11:05:07 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready Jan 31 11:05:07 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW filter on device enp4s0 Jan 31 11:05:11 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 11:05:11 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready Jan 31 11:05:11 CentOS-73-64-minimal daemonAdapter[11064]: libvirt: Network Driver error : Network not found: no network with matching name 'vdsm-ovirtmgmt' Jan 31 11:07:12 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Down Jan 31 11:07:12 CentOS-73-64-minimal systemd[1]: Started /usr/sbin/ifup enp4s0. Jan 31 11:07:12 CentOS-73-64-minimal systemd[1]: Starting /usr/sbin/ifup enp4s0. Jan 31 11:07:12 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready Jan 31 11:07:12 CentOS-73-64-minimal kernel: 8021q: adding VLAN 0 to HW filter on device enp4s0 Jan 31 11:07:16 CentOS-73-64-minimal vdsm[11340]: vdsm vds ERROR connectivity check failed Traceback (most recent call last): File "/usr/share/vdsm/API.py", line 1473, in setupNetworks supervdsm.getProxy().setupNetworks(networks, bondings, options) File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 53, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/supervdsm.py", line 51, in <lambda> **kwargs) File "<string>", line 2, in setupNetworks File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result) ConfigNetworkError: (10, 'connectivity check failed') Jan 31 11:07:17 CentOS-73-64-minimal kernel: e1000e: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jan 31 11:07:17 CentOS-73-64-minimal kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
On Jan 31, 2017, at 11:06 AM, Yedidyah Bar David <didi@redhat.com> wrote:
On Tue, Jan 31, 2017 at 9:43 AM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
I could SSH into it, because (as per supervdsm log) the original network config was restored.
Engine and host are in completely different continents (America, Europe)
I cleared both engine.log and host logs. Went into Ovirt GUI and ‘Setup Host Networks and dragged ovirtmgmt in my GUI to bind with the main ethernet adapter.
As always, the console freezes (as network connection is lost after those retries and the original config is restored).
engine.log http://pastebin.com/kT6WSq2W
and host-deploy doesn’t add any extra info. I guess it’s because I am actually not deploying the host, but rather doing ‘Setup Host Networks’ attachment of ‘ovirtmgmt’?
OK. Re-adding Eduard and changing subject. Best,
Thanks so much for replying.
On Jan 31, 2017, at 9:28 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
On Mon, Jan 30, 2017 at 6:05 PM, Eidmantas Ivanauskas <eidmantasivanauskas@gmail.com> wrote:
Hey guys,
Trying to setup a new Ovirt Engine + a separate CentOS 7.2 based Host. After adding the host, SSH freezes (possibly due to the log below), then the GUI just displays ‘Non Operational’.
Please note that following CentOS 7.3 release, 7.2 is not supported anymore. Latest qemu-kvm-ev 2.6 requires CentOS 7.3.
[root@CentOS-73-64-minimal ~]# cat /etc/centos-release CentOS Linux release 7.3.1611 (Core) [root@CentOS-73-64-minimal ~]#
It was 7.3 after all, not 7.2. Sorry.
The engine is running in Hetzner DC which allows for only MAC based routing, but I don’t think this part of the setup is connected. I heard people having issues routing additional IP pools.
Here’s the supervdsm.log from the host server.
What am I missing here? It’s been a long long day. Thanks. Eid
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Didi
participants (3)
-
Edward Haas -
Eidmantas Ivanauskas -
Yedidyah Bar David