On Wed, Aug 2, 2017 at 12:09 PM, Neil <nwilson123(a)gmail.com&gt; wrote: > Hi guys, > > I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available in > the ovirt 3.6 repo, however I seem to be encountering a known bug ( > https://bugzilla.redhat.com/show_bug.cgi?id=1387949) > This specific bug seems to be fixed in 4.1 (and was backported to 4.0) - are you sure it's fixed in 3.6.x?

which looks to be fixed in ovirt 3.6.9.2 but I can't seem to find out how > to install this. > > I was hoping it was via http://resources.ovirt.org/pub/ovirt-3.6-snapshot > but this link is dead. > > Is anyone using ovirt 3.6.9 and how does one obtain it? > If you are on 3.6.7, go ahead and upgrade.

> The issues I'm facing is, after trying to update my cluster version to > 3.6, my hosts weren't compatible, as it says they only compatible with > version 3.3, 3.4 and 3.5 etc. I then upgraded 1 hosts to Centos 6.9 and > installed and updated the latest vdsm from the 3.6 repo, but this still > didn't allow me to change my cluster version. I then rolled back the > cluster version to 3.5. > > At the moment because I've upgraded 1 host, I can't select this host as > SPM and I'm wondering if I can upgrade my remaining hosts, or will this > prevent any hosts from being my SPM? I'm seeing the following error > "WARNING Unrecognized protocol: 'SUBSCRI'" on my upgraded host. > > I'm wanting to upgrade to the latest 3.6 as well as upgrade all my hosts, > so that I can start the ovirt 4 upgrade next. > > Please could I have some guidance on this? > > Thank you. > > Regards. > > Neil Wilson. > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >

On Wed, Aug 2, 2017 at 1:06 PM, Neil <nwilson123(a)gmail.com&gt; wrote: > Hi Yaniv, > > Thanks for the assistance. > > On Wed, Aug 2, 2017 at 12:01 PM, Yaniv Kaul <ykaul(a)redhat.com&gt; wrote: > >> >> >> On Wed, Aug 2, 2017 at 12:09 PM, Neil <nwilson123(a)gmail.com&gt; wrote: >> >>> Hi guys, >>> >>> I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available >>> in the ovirt 3.6 repo, however I seem to be encountering a known bug ( >>> https://bugzilla.redhat.com/show_bug.cgi?id=1387949) >>> >> >> This specific bug seems to be fixed in 4.1 (and was backported to 4.0) - >> are you sure it's fixed in 3.6.x? >> >> > > I only "suspect" it fixed because the Redhat bug report mentions it was > fixed. > Is this causing the failure to negotiate SPM, as this is what I'm trying > to resolve? > > > >> which looks to be fixed in ovirt 3.6.9.2 but I can't seem to find out >>> how to install this. >>> >>> I was hoping it was via http://resources.ovirt.org >>> /pub/ovirt-3.6-snapshot but this link is dead. >>> >>> Is anyone using ovirt 3.6.9 and how does one obtain it? >>> >> >> If you are on 3.6.7, go ahead and upgrade. >> > > Any ideas how? I don't see a repo available for it and can't find > packages even when looking through http://resources.ovirt.org manually? > See the upgrade guide @ http://www.ovirt.org/documentation/upgrade-guide/ upgrade-guide/

http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm ) Y.

> > Y. >> >> >>> The issues I'm facing is, after trying to update my cluster version to >>> 3.6, my hosts weren't compatible, as it says they only compatible with >>> version 3.3, 3.4 and 3.5 etc. I then upgraded 1 hosts to Centos 6.9 and >>> installed and updated the latest vdsm from the 3.6 repo, but this still >>> didn't allow me to change my cluster version. I then rolled back the >>> cluster version to 3.5. >>> >>> At the moment because I've upgraded 1 host, I can't select this host as >>> SPM and I'm wondering if I can upgrade my remaining hosts, or will this >>> prevent any hosts from being my SPM? I'm seeing the following error >>> "WARNING Unrecognized protocol: 'SUBSCRI'" on my upgraded host. >>> >>> I'm wanting to upgrade to the latest 3.6 as well as upgrade all my >>> hosts, so that I can start the ovirt 4 upgrade next. >>> >>> Please could I have some guidance on this? >>> >>> Thank you. >>> >>> Regards. >>> >>> Neil Wilson. >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >

On Wed, Aug 2, 2017 at 2:39 PM, Neil <nwilson123(a)gmail.com&gt; wrote: > Thanks Yaniv, > > > On Wed, Aug 2, 2017 at 12:12 PM, Yaniv Kaul <ykaul(a)redhat.com&gt; wrote: > >> >> >> On Wed, Aug 2, 2017 at 1:06 PM, Neil <nwilson123(a)gmail.com&gt; wrote: >> >>> Hi Yaniv, >>> >>> Thanks for the assistance. >>> >>> On Wed, Aug 2, 2017 at 12:01 PM, Yaniv Kaul <ykaul(a)redhat.com&gt; wrote: >>> >>>> >>>> >>>> On Wed, Aug 2, 2017 at 12:09 PM, Neil <nwilson123(a)gmail.com&gt; wrote: >>>> >>>>> Hi guys, >>>>> >>>>> I upgraded to the latest ovirt-engine-3.6.7.5-1.el6.noarch available >>>>> in the ovirt 3.6 repo, however I seem to be encountering a known bug ( >>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1387949) >>>>> >>>> >>>> This specific bug seems to be fixed in 4.1 (and was backported to 4.0) >>>> - are you sure it's fixed in 3.6.x? >>>> >>>> >>> >>> I only "suspect" it fixed because the Redhat bug report mentions it was >>> fixed. >>> Is this causing the failure to negotiate SPM, as this is what I'm >>> trying to resolve? >>> >>> >>> >>>> which looks to be fixed in ovirt 3.6.9.2 but I can't seem to find out >>>>> how to install this. >>>>> >>>>> I was hoping it was via http://resources.ovirt.org >>>>> /pub/ovirt-3.6-snapshot but this link is dead. >>>>> >>>>> Is anyone using ovirt 3.6.9 and how does one obtain it? >>>>> >>>> >>>> If you are on 3.6.7, go ahead and upgrade. >>>> >>> >>> Any ideas how? I don't see a repo available for it and can't find >>> packages even when looking through http://resources.ovirt.org manually? >>> >> >> See the upgrade guide @ http://www.ovirt.org/documen >> tation/upgrade-guide/upgrade-guide/ >> > > The issue is that there isn't a repo that contains 3.6.9 by the looks of > things, I'm running 3.6.7 and running engine-upgrade-check says there are > no new packages. 3.6.9 doesn't seem to exist in the 3.6 repo? > Indeed, which is why I've suggested you go ahead and upgrade to 4. > > > (don't forget to enable the channels - you can do it first by installing >> http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm ) >> Y. >> > > I'd like to upgrade to 4 asap, but this involves installing a new Centos > 7 machine to migrate my engine currently running on Centos 6.9, which I > can't do just yet. > Correct, you'll need CentOS 7. I've heard 7.4 is in the oven and will be ready in the coming weeks (?). Y. > > > > > > >> >> >>> >>> Y. >>>> >>>> >>>>> The issues I'm facing is, after trying to update my cluster version >>>>> to 3.6, my hosts weren't compatible, as it says they only compatible with >>>>> version 3.3, 3.4 and 3.5 etc. I then upgraded 1 hosts to Centos 6.9 and >>>>> installed and updated the latest vdsm from the 3.6 repo, but this still >>>>> didn't allow me to change my cluster version. I then rolled back the >>>>> cluster version to 3.5. >>>>> >>>>> At the moment because I've upgraded 1 host, I can't select this host >>>>> as SPM and I'm wondering if I can upgrade my remaining hosts, or will this >>>>> prevent any hosts from being my SPM? I'm seeing the following error >>>>> "WARNING Unrecognized protocol: 'SUBSCRI'" on my upgraded host. >>>>> >>>>> I'm wanting to upgrade to the latest 3.6 as well as upgrade all my >>>>> hosts, so that I can start the ovirt 4 upgrade next. >>>>> >>>>> Please could I have some guidance on this? >>>>> >>>>> Thank you. >>>>> >>>>> Regards. >>>>> >>>>> Neil Wilson. >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>> >>> >> >