9:11 a.m.
Hi all,
Saw the ongoing thread on oVirt 3.1 and Gluster, discussing
how to handle/portray storage networks in the Engine UI.
What's the right way to approach this, for people who use
non-IP based storage networks? (Infiniband, Fibre Channel,
etc).
Regards and best wishes,
Justin Clift
--
Aeolus Community Manager
http://www.aeolusproject.org
1:23 p.m.
On 07/09/2012 12:41 PM, Justin Clift wrote:
Hi all,
Saw the ongoing thread on oVirt 3.1 and Gluster, discussing
how to handle/portray storage networks in the Engine UI.
What's the right way to approach this, for people who use
non-IP based storage networks? (Infiniband, Fibre Channel,
etc).
Do you intend performing all management operations over non-IP based
networks?
The ability to provision non-IP (read Infiniband/rdma) storage volumes
in Gluster will be enabled at a later date.
Regards,
Vijay
4:20 p.m.
On 07/09/2012 03:11 AM, Justin Clift wrote:
Hi all,
Saw the ongoing thread on oVirt 3.1 and Gluster, discussing
how to handle/portray storage networks in the Engine UI.
What's the right way to approach this, for people who use
non-IP based storage networks? (Infiniband, Fibre Channel,
etc).
Regards and best wishes,
Justin Clift
--
Aeolus Community Manager
http://www.aeolusproject.org
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Right now the built in volume
controls only supports IP address on the
IP used in storage network. That is likely to change in the future. If
you want to use non-IP based one's they can be used you just have to
manually configure Glusterfs and just mount the share using posix fs or
nfs shares.
Thanks
Robert
9:44 p.m.
On 09/07/2012, at 9:23 PM, Vijay Bellur wrote:
On 07/09/2012 12:41 PM, Justin Clift wrote:
> Hi all,
>
> Saw the ongoing thread on oVirt 3.1 and Gluster, discussing
> how to handle/portray storage networks in the Engine UI.
>
> What's the right way to approach this, for people who use
> non-IP based storage networks? (Infiniband, Fibre Channel,
> etc).
>
Do you intend performing all management operations over non-IP based networks?
Nope, the Infiniband setup is purely for data transport. :)
The nodes and engine boxes have 1Gig ethernet ports as well.
The ability to provision non-IP (read Infiniband/rdma) storage
volumes in Gluster will be enabled at a later date.
Thanks Vijay. Just making sure. :)
Regards and best wishes,
Justin Clift
Regards,
Vijay
--
Aeolus Community Manager
http://www.aeolusproject.org
4330
days inactive
4330
days old
3 comments
3 participants
participants (3)
-
Justin Clift -
Robert Middleswarth -
Vijay Bellur