Hi, can you please attach the whole content of /var/log/ovirt-hosted-engine-setup ? On Thu, Oct 4, 2018 at 9:25 AM <mustafa.taha.mu95(a)gmail.com&gt; wrote: > i configuer ovirt-self host and then i clear it by this command : > /usr/sbin/ovirt-hosted-engine-cleanup > then i want to re-deploy the selfhost by this error appear : > > [root@ovirtnode44 ~]# hosted-engine --deploy > [ INFO ] Stage: Initializing > [ INFO ] Stage: Environment setup > During customization use CTRL-D to abort. > Continuing will configure this host for serving as hypervisor > and create a local VM with a running engine. > The locally running engine will be used to configure a storage > domain and create a VM there. > At the end the disk of the local VM will be moved to the shared > storage. > Are you sure you want to continue? (Yes, No)[Yes]: > It has been detected that this program is executed through an > SSH connection without using screen. > Continuing with the installation may lead to broken > installation if the network connection fails. > It is highly recommended to abort the installation and run it > inside a screen session using command "screen". > Do you want to continue anyway? (Yes, No)[No]: yes > Configuration files: [] > Log file: > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log > Version: otopi-1.7.8 (otopi-1.7.8-1.el7) > [ INFO ] Stage: Environment packages setup > [ INFO ] Stage: Programs detection > [ INFO ] Stage: Environment setup > [ INFO ] Stage: Environment customization > > --== STORAGE CONFIGURATION ==-- > > > --== HOST NETWORK CONFIGURATION ==-- > > [ INFO ] Bridge ovirtmgmt already created > Please indicate a pingable gateway IP address [192.168.3.2]: > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Detecting interface on existing management bridge] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Get all active network interfaces] > [ INFO ] TASK [Filter bonds with bad naming] > [ INFO ] TASK [Generate output list] > [ INFO ] ok: [localhost] > Please indicate a nic to set ovirtmgmt bridge on: (enp24s0f0) > [enp24s0f0]: > > --== VM CONFIGURATION ==-- > > If you want to deploy with a custom engine appliance image, > please specify the path to the OVA archive you would like to use > (leave it empty to skip, the setup will use > ovirt-engine-appliance rpm installing it if missing): > [ INFO ] Detecting host timezone. > Please provide the FQDN you would like to use for the engine > appliance. > Note: This will be the FQDN of the engine VM you are now going > to launch, > it should not point to the base host or to any other existing > machine. > Engine VM FQDN: []: ovirtengine.exalt.ps > Please provide the domain name you would like to use for the > engine appliance. > Engine VM domain: [exalt.ps] > Enter root password that will be used for the engine appliance: > Confirm appliance root password: > Enter ssh public key for the root user that will be used for > the engine appliance (leave it empty to skip): > [WARNING] Skipping appliance root ssh public key > Do you want to enable ssh access for the root user (yes, no, > without-password) [yes]: > Please specify the number of virtual CPUs for the VM (Defaults > to appliance OVF value): [4]: > Please specify the memory size of the VM in MB (Defaults to > appliance OVF value): [16384]: > You may specify a unicast MAC address for the VM or accept a > randomly generated default [00:16:3e:03:a8:09]: > How should the engine VM network be configured (DHCP, > Static)[DHCP]? Static > Please enter the IP address to be used for the engine VM > [192.168.0.1]: 192.168.200.45 > [ INFO ] The engine VM will be configured to use 192.168.200.45/16 > Please provide a comma-separated list (max 3) of IP addresses > of domain name servers for the engine VM > Engine VM DNS (leave it empty to skip) [192.168.200.6]: > Add lines for the appliance itself and for this host to > /etc/hosts on the engine VM? > Note: ensuring that this host could resolve the engine VM > hostname is still up to you > (Yes, No)[No] > > --== HOSTED ENGINE CONFIGURATION ==-- > > Please provide the name of the SMTP server through which we > will send notifications [localhost]: > Please provide the TCP port number of the SMTP server [25]: > Please provide the email address from which notifications will > be sent [root@localhost]: > Please provide a comma-separated list of email addresses which > will get notifications [root@localhost]: > Enter engine admin password: > Confirm engine admin password: > [ INFO ] Stage: Setup validation > [ INFO ] Stage: Transaction setup > [ INFO ] Stage: Misc configuration > [ INFO ] Stage: Package installation > [ INFO ] Stage: Misc configuration > [ INFO ] Stage: Transaction commit > [ INFO ] Stage: Closing up > [ INFO ] Cleaning previous attempts > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Stop libvirt service] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Drop vdsm config statements] > [ INFO ] TASK [Restore initial abrt config files] > [ INFO ] TASK [Restart abrtd service] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Drop libvirt sasl2 configuration by vdsm] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Stop and disable services] > [ INFO ] TASK [Start libvirt] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Check for leftover local Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Destroy leftover local Hosted Engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Check for leftover defined local Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Undefine leftover local engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Check for leftover defined Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Undefine leftover engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Remove eventually entries for the local VM from > known_hosts file] > [ INFO ] changed: [localhost] > [ INFO ] Starting local VM > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Start libvirt] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Activate default libvirt network] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Get libvirt interfaces] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Get routing rules] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Save bridge name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Wait for the bridge to appear on the host] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Refresh network facts] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Prepare CIDR for virbr0] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Add outbound route rules] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Add inbound route rules] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Get host address resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Check address resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Parse host address resolution] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Ensure host address resolves locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Get target address from selected interface] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Check the resolved address resolves on the selected > interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Check for alias] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Ensure the resolved address resolves only on the selected > interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Get engine FQDN resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Check engine FQDN resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Parse engine FQDN resolution] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Ensure engine FQDN doesn't resolve locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Check http/https proxy] > [ INFO ] TASK [Register the engine FQDN as a host] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Create directory for local VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Set local vm dir path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Fix local VM directory permission] > [ INFO ] changed: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Install ovirt-engine-appliance rpm] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Parse appliance configuration for path] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Parse appliance configuration for sha1sum] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Get OVA path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Compute sha1sum] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Compare sha1sum] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Register appliance PATH] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Extract appliance to local VM directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Find the local appliance image] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Set local_vm_disk_path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Get appliance disk size] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Parse qemu-img output] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Create cloud init user-data and meta-data files] > [ INFO ] TASK [Create ISO disk] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Create local VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Get local VM IP] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Remove eventually entries for the local VM from > /etc/hosts] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Create an entry in /etc/hosts for the local VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Wait for SSH to restart on the local VM] > [ INFO ] ok: [localhost -> localhost] > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [ovirtengine.exalt.ps] > [ INFO ] TASK [Wait for the local VM] > [ INFO ] ok: [ovirtengine.exalt.ps] > [ INFO ] TASK [Add an entry for this host on /etc/hosts on the local VM] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Set FQDN] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Force the local VM FQDN to temporary resolve on the > natted network address] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Restore sshd reverse DNS lookups] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Generate an answer file for engine-setup] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Include before engine-setup custom tasks files for the > engine VM] > [ INFO ] TASK [Execute engine-setup] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Include after engine-setup custom tasks files for the > engine VM] > [ INFO ] TASK [Configure LibgfApi support] > [ INFO ] skipping: [ovirtengine.exalt.ps] > [ INFO ] TASK [Restart ovirt-engine service for LibgfApi support] > [ INFO ] skipping: [ovirtengine.exalt.ps] > [ INFO ] TASK [Mask cloud-init services to speed up future boot] > [ INFO ] TASK [Clean up bootstrap answer file] > [ INFO ] changed: [ovirtengine.exalt.ps] > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Wait for ovirt-engine service to start] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Detect VLAN ID] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Set Engine public key as authorized key without > validating the TLS/SSL certificates] > [ INFO ] changed: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Obtain SSO token using username/password credentials] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Enable GlusterFS at cluster level] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Set VLAN ID at datacenter level] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Force host-deploy in offline mode] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Add host] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Wait for the host to be up] > [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": > {"ovirt_hosts": []}, "attempts": 120, "changed": false} > [ INFO ] TASK [Fetch logs from the engine VM] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Set destination directory path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Create destination directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Find the local appliance image] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Set local_vm_disk_path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Give the vm time to flush dirty buffers] > [ INFO ] TASK [Copy engine logs] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Remove local vm dir] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Notify the user about a failure] > [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The > system may not be provisioned according to the playbook results: please > check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} > [ ERROR ] Failed to execute stage 'Closing up': Failed executing > ansible-playbook > [ INFO ] Stage: Clean up > [ INFO ] Cleaning temporary resources > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Fetch logs from the engine VM] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Set destination directory path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Create destination directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Find the local appliance image] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Set local_vm_disk_path] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [Give the vm time to flush dirty buffers] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Copy engine logs] > [ INFO ] TASK [include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Remove local vm dir] > [ INFO ] ok: [localhost] > [ INFO ] Generating answer file > '/var/lib/ovirt-hosted-engine-setup/answers/answers-20181004031555.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: please check the logs for the > issue, fix accordingly or re-deploy from scratch. > Log file is located at > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/OZ5RLB2CZP5... >