Good Day Ovirt Users; I am running a the following Setup: [image: image.png] [image: image.png] [image: image.png] I need to setup the BOND1 connector in the Datacenter with 9 VLAN's they Exist on the Ovirt Node already and the Bond is UP: [image: image.png] (bond0 is 10GB Chelsio Storage Network) The idea is to pass through Vlan's on bond1 (bond1.1, 1.2, 1.3, 1.n ) where n = vlanid. However I'm unsure as to how I go about setting up the Provider in the datacenter, so that bond1 is used to trunk vlans into the DC. From what I have read the VLAN"s need to exist on the cluster node (they do); but the ovirt-engine must then have some kind of provider configured (just like it does for ovirt mgt) then i can map the vNic Profiles to that new provider as per their vlan assignment. Regards, Hazen