Hi, I've been using oVirt for years and have just discovered a rather strange issue that causes EXTREME high iowait when using a NFSv3 storage. Here's a quick test on a CentOS 7.6 VM running on any oVirt 4.2.x node: (5 oVirt nodes, all showing the same results) # CentOS VM $ dd if=/dev/zero of=TEST02 bs=1M count=3000 3000+0 records in 3000+0 records out 3145728000 bytes (3.1 GB) copied, 141.649 s, 22.2 MB/s # iostat output Device:         rrqm/s   wrqm/s     r/s     w/s    rMB/s    wMB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util vdb               0.00     0.00    1.00   50.00     0.00    23.02   924.39   121.62 2243.47 2301.00 2242.32  19.61 100.00 As you can see iowait is beyond bad both for read and write requests. During this test the underlying NFS storage server was idle, disks barely doing anything. iowait on the NFS storage server was very low. However, when using oflag=direct the test shows a completely different result: # CentOS VM $ dd if=/dev/zero of=TEST02 bs=1M count=3000 oflag=direct 3000+0 records in 3000+0 records out 3145728000 bytes (3.1 GB) copied, 21.0724 s, 149 MB/s # iostat output Device:         rrqm/s   wrqm/s     r/s     w/s    rMB/s    wMB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util vdb               0.00     0.00    4.00  483.00     0.02   161.00   677.13     2.90    5.96    0.00    6.01   1.99  97.10 This test shows the *expected* performance in this small oVirt setup. Notice how iowait remains healthy, although the throughput is 7x higher now. I think this 2nd test may prove multiple things: the NFS storage is fast enough and there's no networking/switch issue either. Still, under normal conditions WRITE/READ operations are really slow and iowait goes through the roof. Do these results make sense to anyone? Any hints how to find what's wrong here? Any tests I should run or sysctls/tunables that would make sense? FWIW, iperf result looks good between the oVirt Node and the NFS storage: [ ID] Interval       Transfer     Bandwidth [  3]  0.0-10.0 sec  10.9 GBytes  9.36 Gbits/sec Regards - Frank _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GUDZWGRLIVC...