7:11 p.m.
Support,
Happy new year, I am trying a fresh install of ovirt (4.4.9) and seem to not be able to
get past deploying the host to the glusterfs volume. I am able to mount the volume from
each host and have checked the configuration of the engine volume which allows vdsm and
KVM to mount. I dont know if this is a glustermount problem or guestfish as the install
fails when moving the VM to the hosted storage. Attached is the install log as well as
the installed packages.
The specific error is genereated when the install "inject network configuration with
guestfish" on install is: libguestfs: error: appliance closed the connection
unexpectedly.\nThis usually means the libguestfs appliance crashed
Based off the error, "relabeling" I have even attempted to disable selinux in
the engine during install which produced the same error. Additionally I also downgraded
Any help is appreciated.
Thanks
AK
1:28 a.m.
On Sun, Jan 2, 2022 at 9:19 AM Andy Kress <andy.kress(a)gmail.com> wrote:
Support,
Happy new year, I am trying a fresh install of ovirt (4.4.9) and seem to not be able to
get past deploying the host to the glusterfs volume. I am able to mount the volume from
each host and have checked the configuration of the engine volume which allows vdsm and
KVM to mount. I dont know if this is a glustermount problem or guestfish as the install
fails when moving the VM to the hosted storage. Attached is the install log as well as
the installed packages.
The specific error is genereated when the install "inject network configuration with
guestfish" on install is: libguestfs: error: appliance closed the connection
unexpectedly.\nThis usually means the libguestfs appliance crashed
Can you please try downgrading qemu to 6.0.0 and see if it helps? Thanks.
If so, this is a known issue, already mentioned on this list.
Otherwise, please check share all relevant logs from both host and VM's disk
image (if possible).
Thanks and best regards,
--
Didi
10:09 a.m.
Thank you for the reply. I did downgrade QEMU to the version 6 based off the other
ticket/problem and still received the same result. When sending email I accidentally used
a different email and there are two threads opened on the same problem. Attaching the
logs to this thread as well. thanks
10:10 a.m.
The specific error on install is: libguestfs: error: appliance closed the connection
unexpectedly.\nThis usually means the libguestfs appliance crashed and the ansible setup
fails at injecting network config with guestfish.
The specific error form the install:
fatal: [localhost]: FAILED! => {"changed": true, "cmd":
["guestfish", "-a",
"/var/tmp/localvm4y8lnuwb/images/31647f4a-5dd8-4c24-9b36-82427e9f9d54/5445e40c-290f-4ea5-af25-9a86d3d72956",
"--rw", "-i", "copy-in",
"/var/tmp/localvm4y8lnuwb/ifcfg-eth0",
"/etc/sysconfig/network-scripts", ":", "selinux-relabel",
"/etc/selinux/targeted/contexts/files/file_contexts",
"/etc/sysconfig/network-scripts/ifcfg-eth0", "force:true"],
"delta": "0:00:03.911501", "end": "2021-12-31
20:51:38.551804", "msg": "non-zero return code", "rc":
1, "start":
"2021-12-31 20:51:34.640303", "stderr": "libguestfs: error:
appliance closed the connection unexpectedly.\nThis usually means the libguestfs
appliance
crashed.\nDo:\n export LIBGUESTFS_DEBUG=1 LIBGUESTFS_TRACE=1\nand run the command again.
For further information, read:\n
http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs\nYou can also run
'libguestfs-test-tool' and post the *complete* output\ninto a bug report or
message to the libguestfs mailing list.\nlibguestfs: error: guestfs_launch failed.\nThis
usually means the libguestfs appliance failed to start or crashed.\nDo:\n export
LIBGUESTFS_DEBUG=1 LIBGUESTFS_TRACE=1\nand run the command again. For further
information, read:\n http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs\nYou
can also run 'libguestfs-test-tool' and post
the *complete* output\ninto a bug report or message to the libguestfs mailing
list.",
"stderr_lines": ["libguestfs: error: appliance closed the connection
unexpectedly.", "This usually means the libguestfs appliance crashed.",
"Do:", " export LIBGUESTFS_DEBUG=1 LIBGUESTFS_TRACE=1", "and
run
the command again. For further information, read:", "
http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs";, "You can also
run 'libguestfs-test-tool' and post the *complete* output", "into a bug
report or message to the libguestfs mailing list.", "libguestfs: error:
guestfs_launch failed.", "This usually means the libguestfs appliance failed to
start or crashed.", "Do:", " export LIBGUESTFS_DEBUG=1
LIBGUESTFS_TRACE=1", "and run the command again. For further information,
read:", "
http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs";,
"You can also run 'libguestfs-test-tool' and post the *complete*
output", "into a bug report or message to the libguestfs mailing list."],
"stdout": "", "stdout_lines":
10:19 a.m.
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
10:43 a.m.
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
3:06 p.m.
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org>
wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org> wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org
<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
<https://www.ovirt.org/privacy-policy.html>
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
<https://www.ovirt.org/community/about/community-guidelines/>
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
10:01 p.m.
Apologies for the delay
yes sir all folders and the uid/gid of the gluste vol is 36
Thanks
11:25 a.m.
Here are the configured options for the gluster volume:
Options Reconfigured:
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
network.ping-timeout: 30
server.event-threads: 4
client.event-threads: 4
cluster.choose-local: off
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
performance.strict-o-direct: on
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
storage.owner-gid: 36
storage.owner-uid: 36
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: on
On Tuesday, January 4, 2022, 07:23:24 PM EST, AK via Users <users(a)ovirt.org>
wrote:
Yes sir and I do see the storage domain being created. I also validated the UID, GID,
and the folder for the brick is all owned by 36.
Thanks
On Jan 3, 2022 4:06 PM, Darrell Budic <budic(a)onholyground.com> wrote:
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org> wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDCLILB54EM...
12:19 p.m.
Attached is a updated install log with the same error. It appears when the network
config information is being "inject" it fails to copy and or the engine just
disappears. Since this install has been attempted a few times and the ovirtmgmt bridge is
already created would that affect this? I am going to remove it and attempt another
install. If anyone has any insight into this I'd appreciate it.
Thanks
AK
On Thursday, January 6, 2022, 12:26:19 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Here are the configured options for the gluster volume:
Options Reconfigured:
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
network.ping-timeout: 30
server.event-threads: 4
client.event-threads: 4
cluster.choose-local: off
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
performance.strict-o-direct: on
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
storage.owner-gid: 36
storage.owner-uid: 36
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: on
On Tuesday, January 4, 2022, 07:23:24 PM EST, AK via Users <users(a)ovirt.org>
wrote:
Yes sir and I do see the storage domain being created. I also validated the UID, GID,
and the folder for the brick is all owned by 36.
Thanks
On Jan 3, 2022 4:06 PM, Darrell Budic <budic(a)onholyground.com> wrote:
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org> wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDCLILB54EM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M4KZWPZXMMM...
1:41 p.m.
I removed all network bridges created by previous installs, reran the install which
produced the same results. Attached at the latest setup logs. Thanks
On Thursday, January 6, 2022, 01:23:39 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Attached is a updated install log with the same error. It appears when the network
config information is being "inject" it fails to copy and or the engine just
disappears. Since this install has been attempted a few times and the ovirtmgmt bridge is
already created would that affect this? I am going to remove it and attempt another
install. If anyone has any insight into this I'd appreciate it.
Thanks
AK
On Thursday, January 6, 2022, 12:26:19 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Here are the configured options for the gluster volume:
Options Reconfigured:
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
network.ping-timeout: 30
server.event-threads: 4
client.event-threads: 4
cluster.choose-local: off
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
performance.strict-o-direct: on
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
storage.owner-gid: 36
storage.owner-uid: 36
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: on
On Tuesday, January 4, 2022, 07:23:24 PM EST, AK via Users <users(a)ovirt.org>
wrote:
Yes sir and I do see the storage domain being created. I also validated the UID, GID,
and the folder for the brick is all owned by 36.
Thanks
On Jan 3, 2022 4:06 PM, Darrell Budic <budic(a)onholyground.com> wrote:
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org> wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDCLILB54EM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M4KZWPZXMMM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BJX3SDXTZVL...
3:10 p.m.
Attached is every log from the engine setup. Thanks
On Thursday, January 6, 2022, 02:41:53 PM EST, Andy <farkey_2000(a)yahoo.com>
wrote:
I removed all network bridges created by previous installs, reran the install which
produced the same results. Attached at the latest setup logs. Thanks
On Thursday, January 6, 2022, 01:23:39 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Attached is a updated install log with the same error. It appears when the network
config information is being "inject" it fails to copy and or the engine just
disappears. Since this install has been attempted a few times and the ovirtmgmt bridge is
already created would that affect this? I am going to remove it and attempt another
install. If anyone has any insight into this I'd appreciate it.
Thanks
AK
On Thursday, January 6, 2022, 12:26:19 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Here are the configured options for the gluster volume:
Options Reconfigured:
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
network.ping-timeout: 30
server.event-threads: 4
client.event-threads: 4
cluster.choose-local: off
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
performance.strict-o-direct: on
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
storage.owner-gid: 36
storage.owner-uid: 36
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: on
On Tuesday, January 4, 2022, 07:23:24 PM EST, AK via Users <users(a)ovirt.org>
wrote:
Yes sir and I do see the storage domain being created. I also validated the UID, GID,
and the folder for the brick is all owned by 36.
Thanks
On Jan 3, 2022 4:06 PM, Darrell Budic <budic(a)onholyground.com> wrote:
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org> wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDCLILB54EM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M4KZWPZXMMM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BJX3SDXTZVL...
4:17 p.m.
The latest on this I downgraded qemu-kvm to the lowest version in the CentOS8 Stream/Ovirt
Repo:
qemu-kvm-common-6.0.0-26.el8s.x86_64
qemu-kvm-block-ssh-6.0.0-26.el8s.x86_64
qemu-kvm-block-gluster-6.0.0-26.el8s.x86_64
qemu-kvm-6.0.0-26.el8s.x86_64
qemu-kvm-ui-opengl-6.0.0-26.el8s.x86_64
qemu-kvm-docs-6.0.0-26.el8s.x86_64
qemu-kvm-block-rbd-6.0.0-26.el8s.x86_64
qemu-kvm-block-curl-6.0.0-26.el8s.x86_64
qemu-kvm-core-6.0.0-26.el8s.x86_64
qemu-kvm-hw-usbredir-6.0.0-26.el8s.x86_64
qemu-kvm-block-iscsi-6.0.0-26.el8s.x86_64
qemu-kvm-ui-spice-6.0.0-26.el8s.x86_64
When the install exposes the engine, I am able to log in, see the storage domain get
attached, see the host become active, see the disks copied to the hosted_engine storage
domain, however as with every attempted install, it fails at:
2022-01-06 17:03:16,097-0500 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils
ansible_utils._process_output:106 {'results': [{'msg': 'non-zero
return code', 'cmd': ['virt-copy-out', '-a',
'/var/tmp/localvmjgnfgb1f/images/31647f4a-5dd8-4c24-9b36-82427e9f9d54/5445e40c-290f-4ea5-af25-9a86d3d72956',
'/var/lo
g', '/var/log/ovirt-hosted-engine-setup/engine-logs-2022-01-06T22:02:55Z/'],
'stdout': '', 'stderr': "libguestfs: error: appliance closed
the connection u
nexpectedly.\nThis usually means the libguestfs appliance crashed.
I have attempted to downgrade the libguestfish however it wont as it appears to want the
libguestfs-appliance-1:1.44.0-4.module_el8.6.0+983+a7505f3f.x86_64. All libguestfs
versions installed are the 1.44.0-4
thanks
On Thursday, January 6, 2022, 04:12:44 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Attached is every log from the engine setup. Thanks
On Thursday, January 6, 2022, 02:41:53 PM EST, Andy <farkey_2000(a)yahoo.com>
wrote:
I removed all network bridges created by previous installs, reran the install which
produced the same results. Attached at the latest setup logs. Thanks
On Thursday, January 6, 2022, 01:23:39 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Attached is a updated install log with the same error. It appears when the network
config information is being "inject" it fails to copy and or the engine just
disappears. Since this install has been attempted a few times and the ovirtmgmt bridge is
already created would that affect this? I am going to remove it and attempt another
install. If anyone has any insight into this I'd appreciate it.
Thanks
AK
On Thursday, January 6, 2022, 12:26:19 PM EST, Andy via Users <users(a)ovirt.org>
wrote:
Here are the configured options for the gluster volume:
Options Reconfigured:
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
network.ping-timeout: 30
server.event-threads: 4
client.event-threads: 4
cluster.choose-local: off
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
performance.strict-o-direct: on
network.remote-dio: off
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
storage.owner-gid: 36
storage.owner-uid: 36
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: on
On Tuesday, January 4, 2022, 07:23:24 PM EST, AK via Users <users(a)ovirt.org>
wrote:
Yes sir and I do see the storage domain being created. I also validated the UID, GID,
and the folder for the brick is all owned by 36.
Thanks
On Jan 3, 2022 4:06 PM, Darrell Budic <budic(a)onholyground.com> wrote:
Did you confirm that vdsm:kvm (36:36) has full permissions to the selected storage?
On Jan 2, 2022, at 10:43 AM, Andy via Users <users(a)ovirt.org> wrote:
Attached are the setup logs
On Sunday, January 2, 2022, 11:20:34 AM EST, AK via Users <users(a)ovirt.org>
wrote:
Aldo I didnt know if this was an SELINUX problem, as I it is set to permissive which
produces the same error. thanks
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSM4OER6J4K...
<ovirt-hosted-engine-setup-20211231185249-ht5tn7.log>_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LZIXVEJHYGI...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UDCLILB54EM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M4KZWPZXMMM...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BJX3SDXTZVL...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LH3YEA4HV7U...
6:19 p.m.
Can you write on the storage domain like this:
sudo -u vdsm if=/dev/zero of=/rhev/..../full/path/<somefile> oflag=direct bs=512
count=10
Best Regards,Strahil Nikolov
On Fri, Jan 7, 2022 at 0:19, Andy via Users<users(a)ovirt.org> wrote:
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EKURCFRH66G...
10:28 p.m.
Sir,
I can see the data domain written to
"/rhev/data-center/mnt/glusterSD/vstore00:_engine" on the host I am trying to
deploy from. when I attempt to write to the directory with:
sudo -u vdsm dd if=/dev/zero of=/rhev/data-center/mnt/glusterSD/vstore00:_engine/test.txt
oflag=direct bs=512 count=10 I am able to create the file. Is that the command you were
referring to?
thanks
On Thursday, January 6, 2022, 07:19:21 PM EST, Strahil Nikolov
<hunter86_bg(a)yahoo.com> wrote:
Can you write on the storage domain like this:
sudo -u vdsm if=/dev/zero of=/rhev/..../full/path/<somefile> oflag=direct bs=512
count=10
Best Regards,Strahil Nikolov
On Fri, Jan 7, 2022 at 0:19, Andy via Users<users(a)ovirt.org> wrote:
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EKURCFRH66G...
835
days inactive
840
days old
16 comments
8 participants
participants (8)
-
AK -
Andy
-
Andy Kress -
Andy Kress -
Darrell Budic -
farkey_2000＠yahoo.com
-
Strahil Nikolov -
Yedidyah Bar David