Ovirt 4.4.6.5-1 engine-setup failed
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Below is output of /var/log/ovirt-imageio/daemon.log: 2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue? Thanks Don
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure:
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log? /var/log/ovirt-imageio/daemon.log Nir
Nir It just repeats. Here you go 2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol Don On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated
vm. Towards the end of the engine-setup session I have a failure:
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module
[ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
/usr/share/ovirt-engine/selinux/ansible-runner-service.cil line 46, in main
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__
self.remote_service = services.RemoteService(self.config, self.auth) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com> wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging. Can you try to change the log level to DEBUG and start the ovirt-imageio service? Add this file: $ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG And start the service: $ systemctl start ovirt-imageio I hope we will have more info in the log explaining this issue. And to make sure we have correct configuration, please share output of: $ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure:
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
2021-04-26 15:29:50,728 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13203, version=2.1.1) 2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,732 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 15:29:50,919 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13208, version=2.1.1) 2021-04-26 15:29:50,919 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,922 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol # ovirt-imageio --show-config { "backend_file": { "buffer_size": 8388608 }, "backend_http": { "buffer_size": 8388608, "ca_file": "/etc/pki/ovirt-engine/ca.pem" }, "backend_nbd": { "buffer_size": 8388608 }, "control": { "port": 54324, "prefer_ipv4": true, "remove_timeout": 60, "socket": "/run/ovirt-imageio/sock", "transport": "tcp" }, "daemon": { "drop_privileges": true, "group_name": "ovirtimg", "max_connections": 8, "poll_interval": 1.0, "run_dir": "/run/ovirt-imageio", "user_name": "ovirtimg" }, "formatter_long": { "format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s] %(message)s" }, "formatters": { "keys": "long" }, "handler_logfile": { "args": "(\"/var/log/ovirt-imageio/daemon.log\",)", "formatter": "long", "class": "logging.handlers.RotatingFileHandler", "kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}", "level": "DEBUG" }, "handler_stderr": { "formatter": "long", "class": "logging.StreamHandler", "level": "DEBUG" }, "handlers": { "keys": "logfile" }, "local": { "enable": false, "socket": "\u0000/org/ovirt/imageio" }, "logger_root": { "handlers": "logfile", "level": "DEBUG", "propagate": 0 }, "loggers": { "keys": "root" }, "profile": { "filename": "/run/ovirt-imageio/profile" }, "remote": { "host": "::", "port": 54323 }, "tls": { "ca_file": "/etc/pki/ovirt-engine/apache-ca.pem", "cert_file": "/etc/pki/ovirt-engine/certs/apache.cer", "enable": true, "enable_tls1_1": false, "key_file": "/etc/pki/ovirt-engine/keys/apache.key.nopass" } } On Mon, Apr 26, 2021 at 3:22 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com> wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG
And start the service:
$ systemctl start ovirt-imageio
I hope we will have more info in the log explaining this issue.
And to make sure we have correct configuration, please share output of:
$ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module
/usr/share/ovirt-engine/selinux/ansible-runner-service.cil
[ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
dedicated vm. Towards the end of the engine-setup session I have a failure: line 46, in main line 110, in __init__ line 73, in __init__
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
Nir After looking at the debug output of daemon.log, it looks like the code is expecting ipv6 to be enabled and I have explicitly disable ipv6. When I enable it and reboot, it now WORKS!!. Where I work we don't use ipv6, is there another option to set so that this works on ipv4 only setups? Thanks Don On Mon, Apr 26, 2021 at 3:32 PM Don Dupuis <dondster@gmail.com> wrote:
2021-04-26 15:29:50,728 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13203, version=2.1.1) 2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,732 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 15:29:50,919 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13208, version=2.1.1) 2021-04-26 15:29:50,919 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,922 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
# ovirt-imageio --show-config { "backend_file": { "buffer_size": 8388608 }, "backend_http": { "buffer_size": 8388608, "ca_file": "/etc/pki/ovirt-engine/ca.pem" }, "backend_nbd": { "buffer_size": 8388608 }, "control": { "port": 54324, "prefer_ipv4": true, "remove_timeout": 60, "socket": "/run/ovirt-imageio/sock", "transport": "tcp" }, "daemon": { "drop_privileges": true, "group_name": "ovirtimg", "max_connections": 8, "poll_interval": 1.0, "run_dir": "/run/ovirt-imageio", "user_name": "ovirtimg" }, "formatter_long": { "format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s] %(message)s" }, "formatters": { "keys": "long" }, "handler_logfile": { "args": "(\"/var/log/ovirt-imageio/daemon.log\",)", "formatter": "long", "class": "logging.handlers.RotatingFileHandler", "kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}", "level": "DEBUG" }, "handler_stderr": { "formatter": "long", "class": "logging.StreamHandler", "level": "DEBUG" }, "handlers": { "keys": "logfile" }, "local": { "enable": false, "socket": "\u0000/org/ovirt/imageio" }, "logger_root": { "handlers": "logfile", "level": "DEBUG", "propagate": 0 }, "loggers": { "keys": "root" }, "profile": { "filename": "/run/ovirt-imageio/profile" }, "remote": { "host": "::", "port": 54323 }, "tls": { "ca_file": "/etc/pki/ovirt-engine/apache-ca.pem", "cert_file": "/etc/pki/ovirt-engine/certs/apache.cer", "enable": true, "enable_tls1_1": false, "key_file": "/etc/pki/ovirt-engine/keys/apache.key.nopass" } }
On Mon, Apr 26, 2021 at 3:22 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com> wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG
And start the service:
$ systemctl start ovirt-imageio
I hope we will have more info in the log explaining this issue.
And to make sure we have correct configuration, please share output of:
$ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database
schema
[ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
dedicated vm. Towards the end of the engine-setup session I have a failure: line 46, in main line 110, in __init__ line 73, in __init__
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
On Mon, Apr 26, 2021 at 11:56 PM Don Dupuis <dondster@gmail.com> wrote:
Nir After looking at the debug output of daemon.log, it looks like the code is expecting ipv6 to be enabled and I have explicitly disable ipv6. When I enable it and reboot, it now WORKS!!.
Yes, we assume that ipv6 is enabled on the engine and hypervisors. You will have the same issue with the hypervisors, since vdsm is also listening on the same address ("::").
Where I work we don't use ipv6, is there another option to set so that this works on ipv4 only setups?
We use the special "::" address so we listen to both ipv4 and ipv6. This works for people who use ipv4 or ipv6. If you must disable ipv6 on the engine host, you can try to listen to an ipv4 address: # cat /etc/ovirt-imageio/conf.d/99-local.conf [remote] host = 0.0.0.0 Similar change is needed for vdsm: # cat /etc/vdsm/vdsm.conf.d/99-local.conf [addresses] management_ip = 0.0.0.0 I'm not sure that disabling ipv6 is tested, you may find other issues on setup with ipv6 disabled. Ales may have more insight on disabling ipv6. Nir
Thanks Don
On Mon, Apr 26, 2021 at 3:32 PM Don Dupuis <dondster@gmail.com> wrote:
2021-04-26 15:29:50,728 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13203, version=2.1.1) 2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,732 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 15:29:50,919 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13208, version=2.1.1) 2021-04-26 15:29:50,919 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,922 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
# ovirt-imageio --show-config { "backend_file": { "buffer_size": 8388608 }, "backend_http": { "buffer_size": 8388608, "ca_file": "/etc/pki/ovirt-engine/ca.pem" }, "backend_nbd": { "buffer_size": 8388608 }, "control": { "port": 54324, "prefer_ipv4": true, "remove_timeout": 60, "socket": "/run/ovirt-imageio/sock", "transport": "tcp" }, "daemon": { "drop_privileges": true, "group_name": "ovirtimg", "max_connections": 8, "poll_interval": 1.0, "run_dir": "/run/ovirt-imageio", "user_name": "ovirtimg" }, "formatter_long": { "format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s] %(message)s" }, "formatters": { "keys": "long" }, "handler_logfile": { "args": "(\"/var/log/ovirt-imageio/daemon.log\",)", "formatter": "long", "class": "logging.handlers.RotatingFileHandler", "kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}", "level": "DEBUG" }, "handler_stderr": { "formatter": "long", "class": "logging.StreamHandler", "level": "DEBUG" }, "handlers": { "keys": "logfile" }, "local": { "enable": false, "socket": "\u0000/org/ovirt/imageio" }, "logger_root": { "handlers": "logfile", "level": "DEBUG", "propagate": 0 }, "loggers": { "keys": "root" }, "profile": { "filename": "/run/ovirt-imageio/profile" }, "remote": { "host": "::", "port": 54323 }, "tls": { "ca_file": "/etc/pki/ovirt-engine/apache-ca.pem", "cert_file": "/etc/pki/ovirt-engine/certs/apache.cer", "enable": true, "enable_tls1_1": false, "key_file": "/etc/pki/ovirt-engine/keys/apache.key.nopass" } }
On Mon, Apr 26, 2021 at 3:22 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com> wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG
And start the service:
$ systemctl start ovirt-imageio
I hope we will have more info in the log explaining this issue.
And to make sure we have correct configuration, please share output of:
$ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote:
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure:
[ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed
Below is output of /var/log/ovirt-imageio/daemon.log:
2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
Nir Thanks for the info and explanation. Don On Mon, Apr 26, 2021 at 4:27 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 11:56 PM Don Dupuis <dondster@gmail.com> wrote:
Nir After looking at the debug output of daemon.log, it looks like the code
is expecting ipv6 to be enabled and I have explicitly disable ipv6. When I enable it and reboot, it now WORKS!!.
Yes, we assume that ipv6 is enabled on the engine and hypervisors. You will have the same issue with the hypervisors, since vdsm is also listening on the same address ("::").
Where I work we don't use ipv6, is there another option to set so that this works on ipv4 only setups?
We use the special "::" address so we listen to both ipv4 and ipv6. This works for people who use ipv4 or ipv6.
If you must disable ipv6 on the engine host, you can try to listen to an ipv4 address:
# cat /etc/ovirt-imageio/conf.d/99-local.conf [remote] host = 0.0.0.0
Similar change is needed for vdsm:
# cat /etc/vdsm/vdsm.conf.d/99-local.conf [addresses] management_ip = 0.0.0.0
I'm not sure that disabling ipv6 is tested, you may find other issues on setup with ipv6 disabled.
Ales may have more insight on disabling ipv6.
Nir
Thanks Don
On Mon, Apr 26, 2021 at 3:32 PM Don Dupuis <dondster@gmail.com> wrote:
2021-04-26 15:29:50,728 INFO (MainThread) [server] Starting
2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,732 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config, self.auth) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 15:29:50,919 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13208, version=2.1.1) 2021-04-26 15:29:50,919 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,922 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config, self.auth) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
# ovirt-imageio --show-config { "backend_file": { "buffer_size": 8388608 }, "backend_http": { "buffer_size": 8388608, "ca_file": "/etc/pki/ovirt-engine/ca.pem" }, "backend_nbd": { "buffer_size": 8388608 }, "control": { "port": 54324, "prefer_ipv4": true, "remove_timeout": 60, "socket": "/run/ovirt-imageio/sock", "transport": "tcp" }, "daemon": { "drop_privileges": true, "group_name": "ovirtimg", "max_connections": 8, "poll_interval": 1.0, "run_dir": "/run/ovirt-imageio", "user_name": "ovirtimg" }, "formatter_long": { "format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s] %(message)s" }, "formatters": { "keys": "long" }, "handler_logfile": { "args": "(\"/var/log/ovirt-imageio/daemon.log\",)", "formatter": "long", "class": "logging.handlers.RotatingFileHandler", "kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}", "level": "DEBUG" }, "handler_stderr": { "formatter": "long", "class": "logging.StreamHandler", "level": "DEBUG" }, "handlers": { "keys": "logfile" }, "local": { "enable": false, "socket": "\u0000/org/ovirt/imageio" }, "logger_root": { "handlers": "logfile", "level": "DEBUG", "propagate": 0 }, "loggers": { "keys": "root" }, "profile": { "filename": "/run/ovirt-imageio/profile" }, "remote": { "host": "::", "port": 54323 }, "tls": { "ca_file": "/etc/pki/ovirt-engine/apache-ca.pem", "cert_file": "/etc/pki/ovirt-engine/certs/apache.cer", "enable": true, "enable_tls1_1": false, "key_file": "/etc/pki/ovirt-engine/keys/apache.key.nopass" } }
On Mon, Apr 26, 2021 at 3:22 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com>
wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG
And start the service:
$ systemctl start ovirt-imageio
I hope we will have more info in the log explaining this issue.
And to make sure we have correct configuration, please share output of:
$ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com>
wrote:
> > I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure: > > [ INFO ] Stage: Transaction setup > [ INFO ] Stopping engine service > [ INFO ] Stopping ovirt-fence-kdump-listener service > [ INFO ] Stopping dwh service > [ INFO ] Stopping vmconsole-proxy service > [ INFO ] Stopping websocket-proxy service > [ INFO ] Stage: Misc configuration (early) > [ INFO ] Stage: Package installation > [ INFO ] Stage: Misc configuration > [ INFO ] Upgrading CA > [ INFO ] Initializing PostgreSQL > [ INFO ] Creating PostgreSQL 'engine' database > [ INFO ] Configuring PostgreSQL > [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database > [ INFO ] Configuring PostgreSQL > [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem > [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem > [ INFO ] Updating OVN SSL configuration > [ INFO ] Updating OVN timeout configuration > [ INFO ] Creating/refreshing DWH database schema > [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts > [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts > [ INFO ] Configuring WebSocket Proxy > [ INFO ] Creating/refreshing Engine database schema > [ INFO ] Creating a user for Grafana > [ INFO ] Creating/refreshing Engine 'internal' domain database schema > [ INFO ] Creating default mac pool range > [ INFO ] Adding default OVN provider to database > [ INFO ] Adding OVN provider secret to database > [ INFO ] Setting a password for internal user admin > [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil > [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' > [ INFO ] Stage: Transaction commit > [ INFO ] Stage: Closing up > [ INFO ] Starting engine service > [ INFO ] Starting dwh service > [ INFO ] Starting Grafana service > [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' > [ INFO ] Stage: Clean up > Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log > [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Execution of setup failed > > Below is output of /var/log/ovirt-imageio/daemon.log: > > 2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed > Traceback (most recent call last): > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
> server = Server(cfg) > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
> self.remote_service = services.RemoteService(self.config, self.auth) > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
(hostname=rvsmanager2 pid=13203, version=2.1.1) line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__
> self._server = http.Server((config.remote.host, port), http.Connection) > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ > self.create_socket(prefer_ipv4) > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket > self.socket = socket.socket(self.address_family, self.socket_type) > File "/usr/lib64/python3.6/socket.py", line 144, in __init__ > _socket.socket.__init__(self, family, type, proto, fileno) > OSError: [Errno 97] Address family not supported by protocol > > I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue?
Can you share a complete log?
/var/log/ovirt-imageio/daemon.log
Nir
Hi, just some notes for disabling ipv6. It is not tested to run host and engine with ipv6 stack disabled. In oVirt version 4.4 we are disabling ipv6 through NetworkManager if it is not used. So your host will end up only with ipv4 configuration and no ipv6 local address etc. On the engine the same can be achieved by adding ipv6.method disabled to the connection profile. Hopefully this helps. Regards, Ales On Mon, Apr 26, 2021 at 11:48 PM Don Dupuis <dondster@gmail.com> wrote:
Nir Thanks for the info and explanation.
Don
On Mon, Apr 26, 2021 at 4:27 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 11:56 PM Don Dupuis <dondster@gmail.com> wrote:
Nir After looking at the debug output of daemon.log, it looks like the code
is expecting ipv6 to be enabled and I have explicitly disable ipv6. When I enable it and reboot, it now WORKS!!.
Yes, we assume that ipv6 is enabled on the engine and hypervisors. You will have the same issue with the hypervisors, since vdsm is also listening on the same address ("::").
Where I work we don't use ipv6, is there another option to set so that this works on ipv4 only setups?
We use the special "::" address so we listen to both ipv4 and ipv6. This works for people who use ipv4 or ipv6.
If you must disable ipv6 on the engine host, you can try to listen to an ipv4 address:
# cat /etc/ovirt-imageio/conf.d/99-local.conf [remote] host = 0.0.0.0
Similar change is needed for vdsm:
# cat /etc/vdsm/vdsm.conf.d/99-local.conf [addresses] management_ip = 0.0.0.0
I'm not sure that disabling ipv6 is tested, you may find other issues on setup with ipv6 disabled.
Ales may have more insight on disabling ipv6.
Nir
Thanks Don
On Mon, Apr 26, 2021 at 3:32 PM Don Dupuis <dondster@gmail.com> wrote:
2021-04-26 15:29:50,728 INFO (MainThread) [server] Starting
2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,732 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 15:29:50,919 INFO (MainThread) [server] Starting (hostname=rvsmanager2 pid=13208, version=2.1.1) 2021-04-26 15:29:50,919 DEBUG (MainThread) [services] Creating remote.service on port 54323 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Prefer IPv4: False 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Available network interfaces: [(<AddressFamily.AF_INET6: 10>, <SocketKind.SOCK_STREAM: 1>, 6, '', ('::', 54323, 0, 0))] 2021-04-26 15:29:50,920 DEBUG (MainThread) [http] Creating server socket with family=AddressFamily.AF_INET6 and type=SocketKind.SOCK_STREAM 2021-04-26 15:29:50,922 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
# ovirt-imageio --show-config { "backend_file": { "buffer_size": 8388608 }, "backend_http": { "buffer_size": 8388608, "ca_file": "/etc/pki/ovirt-engine/ca.pem" }, "backend_nbd": { "buffer_size": 8388608 }, "control": { "port": 54324, "prefer_ipv4": true, "remove_timeout": 60, "socket": "/run/ovirt-imageio/sock", "transport": "tcp" }, "daemon": { "drop_privileges": true, "group_name": "ovirtimg", "max_connections": 8, "poll_interval": 1.0, "run_dir": "/run/ovirt-imageio", "user_name": "ovirtimg" }, "formatter_long": { "format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s] %(message)s" }, "formatters": { "keys": "long" }, "handler_logfile": { "args": "(\"/var/log/ovirt-imageio/daemon.log\",)", "formatter": "long", "class": "logging.handlers.RotatingFileHandler", "kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}", "level": "DEBUG" }, "handler_stderr": { "formatter": "long", "class": "logging.StreamHandler", "level": "DEBUG" }, "handlers": { "keys": "logfile" }, "local": { "enable": false, "socket": "\u0000/org/ovirt/imageio" }, "logger_root": { "handlers": "logfile", "level": "DEBUG", "propagate": 0 }, "loggers": { "keys": "root" }, "profile": { "filename": "/run/ovirt-imageio/profile" }, "remote": { "host": "::", "port": 54323 }, "tls": { "ca_file": "/etc/pki/ovirt-engine/apache-ca.pem", "cert_file": "/etc/pki/ovirt-engine/certs/apache.cer", "enable": true, "enable_tls1_1": false, "key_file": "/etc/pki/ovirt-engine/keys/apache.key.nopass" } }
On Mon, Apr 26, 2021 at 3:22 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis <dondster@gmail.com>
wrote:
Nir It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf [logger_root] level = DEBUG
And start the service:
$ systemctl start ovirt-imageio
I hope we will have more info in the log explaining this issue.
And to make sure we have correct configuration, please share output of:
$ ovirt-imageio --show-config
2021-04-26 13:50:49,600 INFO (MainThread) [server] Starting (hostname=manager2 pid=60513, version=2.1.1) 2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:49,954 INFO (MainThread) [server] Starting (hostname=manager2 pid=60530, version=2.1.1) 2021-04-26 13:50:49,967 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol 2021-04-26 13:50:50,199 INFO (MainThread) [server] Starting (hostname=manager2 pid=60567, version=2.1.1) 2021-04-26 13:50:50,203 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
server = Server(cfg) File
"/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
self.remote_service = services.RemoteService(self.config,
self.auth)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
self._server = http.Server((config.remote.host, port),
http.Connection)
File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol
Don
On Mon, Apr 26, 2021 at 2:34 PM Nir Soffer <nsoffer@redhat.com> wrote: > > On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis <dondster@gmail.com> wrote: > > > > I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure: > > > > [ INFO ] Stage: Transaction setup > > [ INFO ] Stopping engine service > > [ INFO ] Stopping ovirt-fence-kdump-listener service > > [ INFO ] Stopping dwh service > > [ INFO ] Stopping vmconsole-proxy service > > [ INFO ] Stopping websocket-proxy service > > [ INFO ] Stage: Misc configuration (early) > > [ INFO ] Stage: Package installation > > [ INFO ] Stage: Misc configuration > > [ INFO ] Upgrading CA > > [ INFO ] Initializing PostgreSQL > > [ INFO ] Creating PostgreSQL 'engine' database > > [ INFO ] Configuring PostgreSQL > > [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database > > [ INFO ] Configuring PostgreSQL > > [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem > > [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem > > [ INFO ] Updating OVN SSL configuration > > [ INFO ] Updating OVN timeout configuration > > [ INFO ] Creating/refreshing DWH database schema > > [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts > > [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts > > [ INFO ] Configuring WebSocket Proxy > > [ INFO ] Creating/refreshing Engine database schema > > [ INFO ] Creating a user for Grafana > > [ INFO ] Creating/refreshing Engine 'internal' domain database schema > > [ INFO ] Creating default mac pool range > > [ INFO ] Adding default OVN provider to database > > [ INFO ] Adding OVN provider secret to database > > [ INFO ] Setting a password for internal user admin > > [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil > > [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' > > [ INFO ] Stage: Transaction commit > > [ INFO ] Stage: Closing up > > [ INFO ] Starting engine service > > [ INFO ] Starting dwh service > > [ INFO ] Starting Grafana service > > [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' > > [ INFO ] Stage: Clean up > > Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log > > [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' > > [ INFO ] Stage: Pre-termination > > [ INFO ] Stage: Termination > > [ ERROR ] Execution of setup failed > > > > Below is output of /var/log/ovirt-imageio/daemon.log: > > > > 2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed > > Traceback (most recent call last): > > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
> > server = Server(cfg) > > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py",
> > self.remote_service = services.RemoteService(self.config, self.auth) > > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py",
(hostname=rvsmanager2 pid=13203, version=2.1.1) line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__ line 46, in main line 110, in __init__ line 73, in __init__
> > self._server = http.Server((config.remote.host, port), http.Connection) > > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ > > self.create_socket(prefer_ipv4) > > File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket > > self.socket = socket.socket(self.address_family, self.socket_type) > > File "/usr/lib64/python3.6/socket.py", line 144, in __init__ > > _socket.socket.__init__(self, family, type, proto, fileno) > > OSError: [Errno 97] Address family not supported by protocol > > > > I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue? > > Can you share a complete log? > > /var/log/ovirt-imageio/daemon.log > > Nir >
-- Ales Musil Software Engineer - RHV Network Red Hat EMEA <https://www.redhat.com> amusil@redhat.com IM: amusil <https://red.ht/sig>
参加者 (3)
-
Ales Musil -
Don Dupuis -
Nir Soffer