[CORRECTED] Can't create 2nd network for VMs in DMZ zone

Hi ! Made a typo in previous message, sorry. I'm having difficulty to utilize 2nd NIC on HP Proliant server in order to connect guest VM to DMZ (engine, node and all other guest VMs are on internal zone). I tried to use PCI passthrough, downed ifcfg-enp3s4f1 on node host, created vNic profile "PCI NIC Passthrough", network named "Node10-NIC2", then Virtual Machines -> Network Interfaces -> nic 2 of type PCI Passthrough and profile above. Unfortunately, guest OS (SuSE Leap 42.3) still don't recognize this NIC. This 2nd NIC is visible on Compute -> Hosts -> Network Interfaces. I can assign it network named "Node10-NIC2". However, right now I'm working from the remote, if node net setup get screwed, it will be a big problem. In the archive I found that this 2nd NIC must be up with no IP and default route. Is this correct definition of ifcfg-enp3s4f1? NetworkManager is disabled on node. TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none DEFROUTE=no IPV4_FAILURE_FATAL=no IPV6INIT=no NM_CONTROLLED=no NAME=enp3s4f1 UUID=09f96366-e4a9-4e6e-a090-7267ed102d36 DEVICE=enp3s4f1 ONBOOT=yes Thanks in advance Andrei V

On Sun, Jan 7, 2018 at 8:18 PM, Andrei V <andreil1@starlett.lv> wrote:
Hi !
Made a typo in previous message, sorry.
I'm having difficulty to utilize 2nd NIC on HP Proliant server in order to connect guest VM to DMZ (engine, node and all other guest VMs are on internal zone).
I tried to use PCI passthrough, downed ifcfg-enp3s4f1 on node host, created vNic profile "PCI NIC Passthrough", network named "Node10-NIC2", then Virtual Machines -> Network Interfaces -> nic 2 of type PCI Passthrough and profile above. Unfortunately, guest OS (SuSE Leap 42.3) still don't recognize this NIC.
This 2nd NIC is visible on Compute -> Hosts -> Network Interfaces. I can assign it network named "Node10-NIC2". However, right now I'm working from the remote, if node net setup get screwed, it will be a big problem. In the archive I found that this 2nd NIC must be up with no IP and default route. Is this correct definition of ifcfg-enp3s4f1? NetworkManager is disabled on node.
TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none DEFROUTE=no IPV4_FAILURE_FATAL=no IPV6INIT=no NM_CONTROLLED=no NAME=enp3s4f1 UUID=09f96366-e4a9-4e6e-a090-7267ed102d36 DEVICE=enp3s4f1 ONBOOT=yes
Thanks in advance Andrei V
A similar question has been already raised not long ago, see https://www.mail-archive.com/users@ovirt.org/msg45269.html _______________________________________________
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (2)
-
Andrei V
-
Edward Haas