[Users] Native USB redirection does not work - (remote-viewer) did not claim interface 0 before use

Hi, I receive the following errors when I attempt to use native USB redirection in RHEV 3.1 beta. It's a smart card reader I am attempting to redirect into a virtual Windows 7 x64 machine. Is this a known error? I've also posted this message to the spice-devel list. Not sure which list is the correct list for this issue. Regards, Siggi Nov 28 12:16:31 workstation kernel: usb 3-2: new full speed USB device number 4 using ohci_hcd Nov 28 12:16:31 workstation kernel: usb 3-2: New USB device found, idVendor=076b, idProduct=3021 Nov 28 12:16:31 workstation kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 28 12:16:31 workstation kernel: usb 3-2: Product: Smart Card Reader USB Nov 28 12:16:31 workstation kernel: usb 3-2: Manufacturer: OMNIKEY AG Nov 28 12:16:31 workstation kernel: usb 3-2: configuration #1 chosen from 1 choice Nov 28 12:16:31 workstation pcscd: hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_76b_3021_noserial_if0 Nov 28 12:16:32 workstation pcscd: readerfactory.c:1024:RFInitializeReader() Attempting startup of Generic CCID Reader 00 00 using /usr/lib64/pcsc/drivers/openct-ifd.bundle/Contents/Linux/openct-ifd.so Nov 28 12:16:32 workstation pcscd: readerfactory.c:846:RFBindFunctions() Loading IFD Handler 2.0 Nov 28 12:16:32 workstation pcscd: readerfactory.c:249:RFAddReader() Using the pcscd polling thread Nov 28 12:16:42 workstation kernel: usb 3-2: reset full speed USB device number 4 using ohci_hcd Nov 28 12:16:42 workstation spice: libusb:warning [op_reset_device] failed to re-claim interface 0 after reset Nov 28 12:16:42 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:43 workstation kernel: usb 3-2: reset full speed USB device number 4 using ohci_hcd Nov 28 12:16:43 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:44 workstation spice: libusb:error [submit_bulk_transfer] submiturb failed error -1 errno=16 Nov 28 12:16:44 workstation spice: Nov 28 12:16:44 workstation spice: (remote-viewer:5630): GSpice-CRITICAL **: usbredirhost error: submitting bulk transfer on ep 05: -1 Nov 28 12:16:44 workstation kernel: usb 3-2: usbfs: process 5630 (remote-viewer) did not claim interface 0 before use Nov 28 12:16:44 workstation spice: libusb:error [submit_bulk_transfer] submiturb failed error -1 errno=16 Nov 28 12:16:44 workstation spice: Nov 28 12:16:44 workstation spice: (remote-viewer:5630): GSpice-CRITICAL **: usbredirhost error: submitting bulk transfer on ep 05: -1 Nov 28 12:16:44 workstation kernel: usb 3-2: usbfs: process 5630 (remote-viewer) did not claim interface 0 before use Nov 28 12:16:44 workstation spice: libusb:error [submit_bulk_transfer] submiturb failed error -1 errno=16 Nov 28 12:16:44 workstation spice: Nov 28 12:16:44 workstation spice: (remote-viewer:5630): GSpice-CRITICAL **: usbredirhost error: submitting bulk transfer on ep 05: -1 Nov 28 12:16:44 workstation kernel: usb 3-2: usbfs: process 5630 (remote-viewer) did not claim interface 0 before use Nov 28 12:16:48 workstation kernel: usb 3-2: reset full speed USB device number 4 using ohci_hcd Nov 28 12:16:48 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:48 workstation kernel: usb 3-2: reset full speed USB device number 4 using ohci_hcd Nov 28 12:16:48 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:55 workstation pcscd: eventhandler.c:429:EHStatusHandlerThread() Card inserted into Generic CCID Reader 00 00 Nov 28 12:16:55 workstation pcscd: eventhandler.c:443:EHStatusHandlerThread() Error powering up card. Nov 28 12:16:57 workstation spice: Nov 28 12:16:57 workstation spice: (remote-viewer:5630): GSpice-CRITICAL **: usbredirhost error: could not set active configuration to 0: -6 Nov 28 12:16:57 workstation kernel: usb 3-2: usbfs: interface 0 claimed by usbfs while 'remote-viewer' sets config #0 Nov 28 12:16:57 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:16:57 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:16:57 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:58 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:16:58 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:16:58 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:16:59 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:16:59 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:16:59 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:00 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:00 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:00 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:01 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:01 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:01 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:02 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:02 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:02 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:03 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:03 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:03 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:04 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:04 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:04 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:05 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:05 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:05 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:06 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:06 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:06 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:07 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:07 workstation ifdhandler[5789]: ccid: begin capture: -5 Nov 28 12:17:07 workstation kernel: usb 3-2: usbfs: process 5789 (ifdhandler) did not claim interface 0 before use Nov 28 12:17:08 workstation ifdhandler[5789]: usb_submiturb failed: Device or resource busy Nov 28 12:17:08 workstation ifdhandler[5789]: ccid: begin capture: -5

Hi,
I receive the following errors when I attempt to use native USB redirection in RHEV 3.1 beta. It's a smart card reader I am attempting to redirect into a virtual Windows 7 x64 machine. e also posted this message to the spice-devel list. Not sure which
On Wed, Nov 28, 2012 at 12:46 PM, Sigbjorn Lie wrote: list is the correct list for
this issue.
I remember during RHEV 3.0 beta cycle you had dedicated forum access on rhn to post this kind of questions. I presume it is there for 3.1 beta too and probably you ought to post there Gianluca
participants (2)
-
Gianluca Cecchi
-
Sigbjorn Lie