11:29 a.m.
Hello,
I have one more question for the gluster deployment.
I have three servers with different disk sizes :
- server1 : 3 x SSD configured in raid 5 mode for a total capacity of 900 GB
- server2 : 6 x SSD configurerd in raid 6 mode for a total capacity of
2,2 TB
- server3 : same as server2 (2,2TB)
Because my server1 has less capacity than the others I will use it as an
arbiter volume (during the deployment I will declare it as the last host
: host3).
Is-it correct ?
So I will create 4 volumes :
- engine : 50 GB type replicated without arbiter
- data : ??
- vmstore : ???
- iso : 15 GB replicated with arbiter volume
Can someone tell me what are the differences between data and vmstore
volume ? In the earlier version there was only information about data
volume and export volume. I found nothing about vmstore volume.
If the wmstore is, as its name suggests, the place where all vm files
will be stored including vm disks images, I think I have to set most of
the capacity for this volume.
So at the end my 4 volumes will be :
- engine : 50 GB type replicated without arbiter
- data : 500 TB replicated with arbiter volume
- vmstore : 1,5 TB replicated with arbiter volume
- iso : 15 GB replicated with arbiter volume
What do you think of this ?
Thanks,
Florent
12:15 p.m.
New subject: Gluster deployment - Arbiter volume - different disk size - volumes sizes
You don't really need a data and vmstore. Vmstore I believe iaeamt to be
the new iso domain but even it is not needed as all data domains act the
same. You can use a seperate data and vmstore domain because it will give
you greater flexibility in terms of backing up thr volumes so you can
choose to backup just the vm data and not images
On Wed, Sep 12, 2018, 5:30 AM florentl, <florentl.info(a)laposte.net> wrote:
Hello,
I have one more question for the gluster deployment.
I have three servers with different disk sizes :
- server1 : 3 x SSD configured in raid 5 mode for a total capacity of 900
GB
- server2 : 6 x SSD configurerd in raid 6 mode for a total capacity of
2,2 TB
- server3 : same as server2 (2,2TB)
Because my server1 has less capacity than the others I will use it as an
arbiter volume (during the deployment I will declare it as the last host
: host3).
Is-it correct ?
So I will create 4 volumes :
- engine : 50 GB type replicated without arbiter
- data : ??
- vmstore : ???
- iso : 15 GB replicated with arbiter volume
Can someone tell me what are the differences between data and vmstore
volume ? In the earlier version there was only information about data
volume and export volume. I found nothing about vmstore volume.
If the wmstore is, as its name suggests, the place where all vm files
will be stored including vm disks images, I think I have to set most of
the capacity for this volume.
So at the end my 4 volumes will be :
- engine : 50 GB type replicated without arbiter
- data : 500 TB replicated with arbiter volume
- vmstore : 1,5 TB replicated with arbiter volume
- iso : 15 GB replicated with arbiter volume
What do you think of this ?
Thanks,
Florent
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/S6Q7D734NCF...
2:33 p.m.
New subject: Gluster deployment - Arbiter volume - different disk size - volumes sizes
For the engine, you will need at least 58 GB. I always use 62 just to be on the safe side.
If you use 50, your install will fail.
You don't need an ISO domain. ISO files can be stored in "data" or
"vmstore".
Each vm you create should have 2 disks, 1 for the o/s & 1 for the data.
The o/s disk goes in "vmstore", the data disk goes in "data".
8:36 p.m.
New subject: Gluster deployment - Arbiter volume - different disk size - volumes sizes
I just use engine and data in mine
On Wed, Sep 12, 2018, 1:33 AM femi adegoke <ovirt(a)fateknollogee.com> wrote:
For the engine, you will need at least 58 GB. I always use 62 just to
be
on the safe side. If you use 50, your install will fail.
You don't need an ISO domain. ISO files can be stored in "data" or
"vmstore".
Each vm you create should have 2 disks, 1 for the o/s & 1 for the data.
The o/s disk goes in "vmstore", the data disk goes in "data".
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XQ4AWPVS5GG...
2061
days inactive
2061
days old
3 comments
4 participants
participants (4)
-
Donny Davis -
femi adegoke -
florentl -
Jayme