9:39 p.m.
I gave up on trying to import my gluster config into ovirt so I tried a
fresh install and just set the gluster peers without creating any volumes.
However none of my hosts will activate, when I try I get:
Gluster command [<UNKNOWN>] failed on server virt01a.
The only thing I see in vdsm.log is:
Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling
'GlusterHost.list' in bridge with {}
Nothing else, can anyone point me into the right direction on how to debug
this with so little information?
<>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 |
www.broadsoft.com
10:07 p.m.
This is a multi-part message in MIME format.
--------------070203080204000702030107
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
On 09/15/2014 12:09 AM, Nathan Stratton wrote:
I gave up on trying to import my gluster config into ovirt so I tried
a fresh install and just set the gluster peers without creating any
volumes. However none of my hosts will activate, when I try I get:
Gluster command [<UNKNOWN>] failed on server virt01a.
The only thing I see in vdsm.log is:
Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
Calling 'GlusterHost.list' in bridge with {}
Nothing else, can anyone point me into the right direction on how to
debug this with so little information?
><>
nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |
www.broadsoft.com <http://www.broadsoft.com>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Nathan,
Could you please check if glusterd is running on the hosts you are
trying to install ? This issue occurs mostly due to glusterd being
stopped on the nodes. Please start glusterd by running the command
'service glusterd start' and try activating the hosts.
Hope this helps.
Thanks
kasturi
--------------070203080204000702030107
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">On 09/15/2014 12:09 AM, Nathan Stratton
wrote:<br>
</div>
<blockquote
cite="mid:CAHubkyMLCu82KBHf5GBtn132Mf8D9_=YQkMAnCrWyis0zSg1cQ@mail.gmail.com"
type="cite">
<div dir="ltr">I gave up on trying to import my gluster config
into ovirt so I tried a fresh install and just set the gluster
peers without creating any volumes. However none of my hosts
will activate, when I try I get:
<div><br>
</div>
<div>Gluster command [<UNKNOWN>] failed on server
virt01a. </div>
<div><br>
</div>
<div>The only thing I see in vdsm.log is:</div>
<div><br>
</div>
<div>Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
Calling 'GlusterHost.list' in bridge with {}</div>
<div><br>
</div>
<div>Nothing else, can anyone point me into the right direction
on how to debug this with so little information?<br
clear="all">
<div><br>
><><br>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 | <a moz-do-not-send="true"
href="http://www.broadsoft.com"
target="_blank">www.broadsoft.com</a></div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
Hi Nathan,<br>
<br>
Could you please check if glusterd is running on the hosts you
are trying to install ? This issue occurs mostly due to glusterd
being stopped on the nodes. Please start glusterd by running the
command 'service glusterd start' and try activating the hosts.<br>
<br>
Hope this helps.<br>
<br>
Thanks<br>
kasturi<br>
</body>
</html>
--------------070203080204000702030107--
11:54 p.m.
glusterd is running on all hosts and all peers are connected.
On Sunday, September 14, 2014, knarra <knarra(a)redhat.com> wrote:
On 09/15/2014 12:09 AM, Nathan Stratton wrote:
I gave up on trying to import my gluster config into ovirt so I tried a
fresh install and just set the gluster peers without creating any volumes.
However none of my hosts will activate, when I try I get:
Gluster command [<UNKNOWN>] failed on server virt01a.
The only thing I see in vdsm.log is:
Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling
'GlusterHost.list' in bridge with {}
Nothing else, can anyone point me into the right direction on how to
debug this with so little information?
--
<>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 |
www.broadsoft.com
_______________________________________________
Users mailing listUsers(a)ovirt.org
<javascript:_e(%7B%7D,'cvml','Users@ovirt.org');>http://lists.ovirt.org/mailman/listinfo/users
Hi Nathan,
Could you please check if glusterd is running on the hosts you are
trying to install ? This issue occurs mostly due to glusterd being stopped
on the nodes. Please start glusterd by running the command 'service
glusterd start' and try activating the hosts.
Hope this helps.
Thanks
kasturi
<>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 |
www.broadsoft.com
7:58 a.m.
This is a multi-part message in MIME format.
--------------000001010204000104050303
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
On 09/15/2014 02:24 AM, Nathan Stratton wrote:
glusterd is running on all hosts and all peers are connected.
Corresponding error messages in vdsm.log should help here.
Do you see any command failure messages in vdsm.log or supervdsm.log?
On Sunday, September 14, 2014, knarra <knarra(a)redhat.com
<mailto:knarra@redhat.com>> wrote:
On 09/15/2014 12:09 AM, Nathan Stratton wrote:
> I gave up on trying to import my gluster config into ovirt so I
> tried a fresh install and just set the gluster peers without
> creating any volumes. However none of my hosts will activate,
> when I try I get:
>
> Gluster command [<UNKNOWN>] failed on server virt01a.
>
> The only thing I see in vdsm.log is:
>
> Thread-3542::DEBUG::2014-09-14
> 14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
> Calling 'GlusterHost.list' in bridge with {}
>
> Nothing else, can anyone point me into the right direction on how
> to debug this with so little information?
>
> ><>
> nathan stratton | vp technology | broadsoft, inc |
> +1-240-404-6580 | www.broadsoft.com <http://www.broadsoft.com>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
<javascript:_e(%7B%7D,'cvml','Users@ovirt.org');>
> http://lists.ovirt.org/mailman/listinfo/users
Hi Nathan,
Could you please check if glusterd is running on the hosts you
are trying to install ? This issue occurs mostly due to glusterd
being stopped on the nodes. Please start glusterd by running the
command 'service glusterd start' and try activating the hosts.
Hope this helps.
Thanks
kasturi
--
><>
nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |
www.broadsoft.com <http://www.broadsoft.com>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--------------000001010204000104050303
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<br>
<div class="moz-cite-prefix">On 09/15/2014 02:24 AM, Nathan Stratton
wrote:<br>
</div>
<blockquote
cite="mid:CAHubkyPgpuxyf+3nH2ROV-ggf+A0d71PdY_PsftJY==nsWmHoQ@mail.gmail.com"
type="cite">glusterd is running on all hosts and all peers are
connected.<span></span><br>
</blockquote>
<br>
Corresponding error messages in vdsm.log should help here.<br>
<br>
Do you see any command failure messages in vdsm.log or
supervdsm.log?<br>
<br>
<br>
<blockquote
cite="mid:CAHubkyPgpuxyf+3nH2ROV-ggf+A0d71PdY_PsftJY==nsWmHoQ@mail.gmail.com"
type="cite"><br>
On Sunday, September 14, 2014, knarra <<a
moz-do-not-send="true"
href="mailto:knarra@redhat.com">knarra@redhat.com</a>>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>On 09/15/2014 12:09 AM, Nathan Stratton wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">I gave up on trying to import my gluster
config into ovirt so I tried a fresh install and just set
the gluster peers without creating any volumes. However
none of my hosts will activate, when I try I get:
<div><br>
</div>
<div>Gluster command [<UNKNOWN>] failed on server
virt01a. </div>
<div><br>
</div>
<div>The only thing I see in vdsm.log is:</div>
<div><br>
</div>
<div>Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
Calling 'GlusterHost.list' in bridge with {}</div>
<div><br>
</div>
<div>Nothing else, can anyone point me into the right
direction on how to debug this with so little
information?<br clear="all">
<div><br>
><><br>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 | <a moz-do-not-send="true"
href="http://www.broadsoft.com"
target="_blank">www.broadsoft.com</a></div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
Users mailing list
<a moz-do-not-send="true"
href="javascript:_e(%7B%7D,'cvml','Users@ovirt.org');"
target="_blank">Users(a)ovirt.org</a>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</pre>
</blockquote>
<br>
Hi Nathan,<br>
<br>
Could you please check if glusterd is running on the hosts
you are trying to install ? This issue occurs mostly due to
glusterd being stopped on the nodes. Please start glusterd by
running the command 'service glusterd start' and try
activating the hosts.<br>
<br>
Hope this helps.<br>
<br>
Thanks<br>
kasturi<br>
</div>
</blockquote>
<br>
<br>
-- <br>
<br>
><><br>
nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580
| <a moz-do-not-send="true" href="http://www.broadsoft.com"
target="_blank">www.broadsoft.com</a><br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</body>
</html>
--------------000001010204000104050303--
2:57 p.m.
This is a multi-part message in MIME format.
--------------090008030001000902060203
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
On 09/15/2014 10:28 AM, Kanagaraj wrote:
On 09/15/2014 02:24 AM, Nathan Stratton wrote:
> glusterd is running on all hosts and all peers are connected.
Corresponding error messages in vdsm.log should help here.
Do you see any command failure messages in vdsm.log or supervdsm.log?
The error seems to be due to the JSON protocol used while installing host.
Can you put the host to Maintenance, and edit the host - uncheck the Use
JSON protocol, and activate host again?
Piotr, do you know what we are missing here?
thanks
sahina
>
> On Sunday, September 14, 2014, knarra <knarra(a)redhat.com
> <mailto:knarra@redhat.com>> wrote:
>
> On 09/15/2014 12:09 AM, Nathan Stratton wrote:
>> I gave up on trying to import my gluster config into ovirt so I
>> tried a fresh install and just set the gluster peers without
>> creating any volumes. However none of my hosts will activate,
>> when I try I get:
>>
>> Gluster command [<UNKNOWN>] failed on server virt01a.
>>
>> The only thing I see in vdsm.log is:
>>
>> Thread-3542::DEBUG::2014-09-14
>> 14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
>> Calling 'GlusterHost.list' in bridge with {}
>>
>> Nothing else, can anyone point me into the right direction on
>> how to debug this with so little information?
>>
>> ><>
>> nathan stratton | vp technology | broadsoft, inc |
>> +1-240-404-6580 | www.broadsoft.com <http://www.broadsoft.com>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
<javascript:_e(%7B%7D,'cvml','Users@ovirt.org');>
>> http://lists.ovirt.org/mailman/listinfo/users
>
> Hi Nathan,
>
> Could you please check if glusterd is running on the hosts
> you are trying to install ? This issue occurs mostly due to
> glusterd being stopped on the nodes. Please start glusterd by
> running the command 'service glusterd start' and try activating
> the hosts.
>
> Hope this helps.
>
> Thanks
> kasturi
>
>
>
> --
>
> ><>
> nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |
> www.broadsoft.com <http://www.broadsoft.com>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--------------090008030001000902060203
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<br>
<div class="moz-cite-prefix">On 09/15/2014 10:28 AM, Kanagaraj
wrote:<br>
</div>
<blockquote cite="mid:541671FD.6030407@redhat.com"
type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<br>
<div class="moz-cite-prefix">On 09/15/2014 02:24 AM, Nathan
Stratton wrote:<br>
</div>
<blockquote
cite="mid:CAHubkyPgpuxyf+3nH2ROV-ggf+A0d71PdY_PsftJY==nsWmHoQ@mail.gmail.com"
type="cite">glusterd is running on all hosts and all peers are
connected.<span></span><br>
</blockquote>
<br>
Corresponding error messages in vdsm.log should help here.<br>
<br>
Do you see any command failure messages in vdsm.log or
supervdsm.log?<br>
</blockquote>
<br>
<br>
The error seems to be due to the JSON protocol used while installing
host.<br>
<br>
Can you put the host to Maintenance, and edit the host - uncheck the
Use JSON protocol, and activate host again?<br>
<br>
Piotr, do you know what we are missing here?<br>
<br>
thanks<br>
sahina<br>
<br>
<blockquote cite="mid:541671FD.6030407@redhat.com"
type="cite"> <br>
<br>
<blockquote
cite="mid:CAHubkyPgpuxyf+3nH2ROV-ggf+A0d71PdY_PsftJY==nsWmHoQ@mail.gmail.com"
type="cite"><br>
On Sunday, September 14, 2014, knarra <<a
moz-do-not-send="true"
href="mailto:knarra@redhat.com">knarra@redhat.com</a>>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>On 09/15/2014 12:09 AM, Nathan Stratton wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">I gave up on trying to import my gluster
config into ovirt so I tried a fresh install and just
set the gluster peers without creating any volumes.
However none of my hosts will activate, when I try I
get:
<div><br>
</div>
<div>Gluster command [<UNKNOWN>] failed on server
virt01a. </div>
<div><br>
</div>
<div>The only thing I see in vdsm.log is:</div>
<div><br>
</div>
<div>Thread-3542::DEBUG::2014-09-14
14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
Calling 'GlusterHost.list' in bridge with {}</div>
<div><br>
</div>
<div>Nothing else, can anyone point me into the right
direction on how to debug this with so little
information?<br clear="all">
<div><br>
><><br>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 | <a moz-do-not-send="true"
href="http://www.broadsoft.com"
target="_blank">www.broadsoft.com</a></div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
Users mailing list
<a moz-do-not-send="true"
href="javascript:_e(%7B%7D,'cvml','Users@ovirt.org');"
target="_blank">Users(a)ovirt.org</a>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</pre>
</blockquote>
<br>
Hi Nathan,<br>
<br>
Could you please check if glusterd is running
on the
hosts you are trying to install ? This issue occurs mostly
due to glusterd being stopped on the nodes. Please start
glusterd by running the command 'service glusterd start' and
try activating the hosts.<br>
<br>
Hope this helps.<br>
<br>
Thanks<br>
kasturi<br>
</div>
</blockquote>
<br>
<br>
-- <br>
<br>
><><br>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 | <a moz-do-not-send="true"
href="http://www.broadsoft.com"
target="_blank">www.broadsoft.com</a><br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</body>
</html>
--------------090008030001000902060203--
3:22 p.m.
Sahina,
I opened the bug [1] some time ago.
Thanks,
Piotr
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1124481
----- Original Message -----
From: "Sahina Bose" <sabose(a)redhat.com>
To: "Kanagaraj" <kmayilsa(a)redhat.com>, "Nathan Stratton"
<nathan(a)robotics.net>, "knarra" <knarra(a)redhat.com>
Cc: "users" <users(a)ovirt.org>, "Piotr Kliczewski"
<pkliczew(a)redhat.com>
Sent: Monday, September 15, 2014 1:57:21 PM
Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on server
On 09/15/2014 10:28 AM, Kanagaraj wrote:
On 09/15/2014 02:24 AM, Nathan Stratton wrote:
> glusterd is running on all hosts and all peers are connected.
Corresponding error messages in vdsm.log should help here.
Do you see any command failure messages in vdsm.log or supervdsm.log?
The error seems to be due to the JSON protocol used while installing host.
Can you put the host to Maintenance, and edit the host - uncheck the Use
JSON protocol, and activate host again?
Piotr, do you know what we are missing here?
thanks
sahina
>
> On Sunday, September 14, 2014, knarra <knarra(a)redhat.com
> <mailto:knarra@redhat.com>> wrote:
>
> On 09/15/2014 12:09 AM, Nathan Stratton wrote:
>> I gave up on trying to import my gluster config into ovirt so I
>> tried a fresh install and just set the gluster peers without
>> creating any volumes. However none of my hosts will activate,
>> when I try I get:
>>
>> Gluster command [<UNKNOWN>] failed on server virt01a.
>>
>> The only thing I see in vdsm.log is:
>>
>> Thread-3542::DEBUG::2014-09-14
>> 14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
>> Calling 'GlusterHost.list' in bridge with {}
>>
>> Nothing else, can anyone point me into the right direction on
>> how to debug this with so little information?
>>
>> ><>
>> nathan stratton | vp technology | broadsoft, inc |
>> +1-240-404-6580 | www.broadsoft.com <http://www.broadsoft.com>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
<javascript:_e(%7B%7D,'cvml','Users@ovirt.org');>
>> http://lists.ovirt.org/mailman/listinfo/users
>
> Hi Nathan,
>
> Could you please check if glusterd is running on the hosts
> you are trying to install ? This issue occurs mostly due to
> glusterd being stopped on the nodes. Please start glusterd by
> running the command 'service glusterd start' and try activating
> the hosts.
>
> Hope this helps.
>
> Thanks
> kasturi
>
>
>
> --
>
> ><>
> nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |
> www.broadsoft.com <http://www.broadsoft.com>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:19 p.m.
Slightly different, or part of the bug may have been fixed. I am not seeing
the hosts go active because of this error, rather the hosts say
NonOperational.
<>
nathan stratton | vp technology | broadsoft, inc |
+1-240-404-6580 |
www.broadsoft.com
On Mon, Sep 15, 2014 at 8:22 AM, Piotr Kliczewski <pkliczew(a)redhat.com>
wrote:
> Sahina,
>
> I opened the bug [1] some time ago.
>
> Thanks,
> Piotr
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1124481
>
> ----- Original Message -----
> From: "Sahina Bose" <sabose(a)redhat.com>
> To: "Kanagaraj" <kmayilsa(a)redhat.com>, "Nathan Stratton"
<
> nathan(a)robotics.net>, "knarra" <knarra(a)redhat.com>
> Cc: "users" <users(a)ovirt.org>, "Piotr Kliczewski"
<pkliczew(a)redhat.com>
> Sent: Monday, September 15, 2014 1:57:21 PM
> Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on server
>
>
> On 09/15/2014 10:28 AM, Kanagaraj wrote:
> >
> > On 09/15/2014 02:24 AM, Nathan Stratton wrote:
> >> glusterd is running on all hosts and all peers are connected.
> >
> > Corresponding error messages in vdsm.log should help here.
> >
> > Do you see any command failure messages in vdsm.log or supervdsm.log?
>
>
> The error seems to be due to the JSON protocol used while installing host.
>
> Can you put the host to Maintenance, and edit the host - uncheck the Use
> JSON protocol, and activate host again?
>
> Piotr, do you know what we are missing here?
>
> thanks
> sahina
>
> >
> >
> >>
> >> On Sunday, September 14, 2014, knarra <knarra(a)redhat.com
> >> <mailto:knarra@redhat.com>> wrote:
> >>
> >> On 09/15/2014 12:09 AM, Nathan Stratton wrote:
> >>> I gave up on trying to import my gluster config into ovirt so I
> >>> tried a fresh install and just set the gluster peers without
> >>> creating any volumes. However none of my hosts will activate,
> >>> when I try I get:
> >>>
> >>> Gluster command [<UNKNOWN>] failed on server virt01a.
> >>>
> >>> The only thing I see in vdsm.log is:
> >>>
> >>> Thread-3542::DEBUG::2014-09-14
> >>> 14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest)
> >>> Calling 'GlusterHost.list' in bridge with {}
> >>>
> >>> Nothing else, can anyone point me into the right direction on
> >>> how to debug this with so little information?
> >>>
> >>> <>
> >>> nathan
stratton | vp technology | broadsoft, inc |
> >>> +1-240-404-6580 | www.broadsoft.com
<http://www.broadsoft.com>
> >>>
> >>>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users(a)ovirt.org
<javascript:_e(%7B%7D,'cvml','Users@ovirt.org');>
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >> Hi Nathan,
> >>
> >> Could you please check if glusterd is running on the hosts
> >> you are trying to install ? This issue occurs mostly due to
> >> glusterd being stopped on the nodes. Please start glusterd by
> >> running the command 'service glusterd start' and try activating
> >> the hosts.
> >>
> >> Hope this helps.
> >>
> >> Thanks
> >> kasturi
> >>
> >>
> >>
> >> --
> >>
> >> <>
> >> nathan
stratton | vp technology | broadsoft, inc | +1-240-404-6580 |
> >> www.broadsoft.com <http://www.broadsoft.com>
> >>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
4:25 p.m.
On Mon, Sep 15, 2014 at 7:57 AM, Sahina Bose <sabose(a)redhat.com> wrote:
On 09/15/2014 10:28 AM, Kanagaraj wrote:
On 09/15/2014 02:24 AM, Nathan Stratton wrote:
glusterd is running on all hosts and all peers are connected.
Corresponding error messages in vdsm.log should help here.
Do you see any command failure messages in vdsm.log or supervdsm.log?
The error seems to be due to the JSON protocol used while installing host.
Can you put the host to Maintenance, and edit the host - uncheck the Use
JSON protocol, and activate host again?
Thanks, that works! However I still don't see my gluster bricks.
supervdsm.log is showing:
supervdsm.log:MainProcess|Thread-17518::DEBUG::2014-09-16
09:23:48,442::utils::738::root::(execCmd) /usr/sbin/gluster --mode=script
peer status --xml (cwd None)
supervdsm.log:MainProcess|Thread-17518::DEBUG::2014-09-16
09:23:48,453::utils::738::root::(execCmd) /usr/sbin/gluster system:: uuid
get (cwd None)
supervdsm.log:MainProcess|Thread-17518::DEBUG::2014-09-16
09:23:48,833::utils::738::root::(execCmd) /usr/sbin/gluster system:: uuid
get (cwd None)
supervdsm.log:MainProcess|Thread-17518::DEBUG::2014-09-16
09:23:51,491::utils::738::root::(execCmd) /usr/sbin/gluster --mode=script
volume info --xml (cwd None)
Piotr, do you know what we are missing here?
-Nathan
thanks
sahina
3720
days inactive
3722
days old
7 comments
5 participants
participants (5)
-
Kanagaraj -
knarra -
Nathan Stratton -
Piotr Kliczewski -
Sahina Bose