On Fri, Sep 29, 2017 at 9:13 AM, Sandro Bonazzola <sbonazzo(a)redhat.com
wrote:
2017-09-18 18:13 GMT+02:00 Alexander Witte <alexander.witte(a)baicanada.com
:
> I am incredibly sorry over this noob question but I am really bashing my
> head trying to simply change an IP address on an Ovirt host. oVirt was
> pushed to this host through the server web interface. It is running on top
> of Centos 7.
> From the docs it says to log into the host and edit the
ifcfg-ovirtmgmt
> file
Which docs exactly? I am asking because the ifcfg is
autogenerated and
would be rewritten on boot based on /var/lib/vdsm/persistence
and I have done and here are the latest settings:
> #Generated by VDSM version
4.19.28-1.e17.centos
> DEVICE:ovirtmgmt
> TYPE:Bridge
> DELAY=0
> STP=off
> ONBOOT=yes
> BOOTPROTO=none
> MTU=1500
> DEFROUTE=yes
> NM_CONTROLLED=no
> IPV6INIT=yes
> IPV6_AUTOCONF=yes
> IPADDR=10.0.0.226
> GATEWAY=10.0.0.1
> PREFIX=13
> DNS1=10.0.0.9
> DNS2=8.8.8.8
> The server can reach everything on the network fine.
Although it cannot
> be reached through the oVirt web interface and the host is in a
> “connecting” status. In the oVirt web interface if I attempt to edit the
> NIC settings from DHCP to Static to reflect the changes Ive made above I
> run into this error:
> - Cannot setup Networks.
Another Setup Networks or Host Refresh
> process in progress on the host. Please try later.
> Dan, Marcin can you help here?
I am afraid that there is no reliable way to change the management network
address of a host. Well, if you've added the host via its fqdn, you could
modify its DNS entry in parallel to modifying its local address, but that
is not fun either.
I'd suggest to remove the host from Engine, remove on-host network
configuration (in ovirt-4.2 that would be possible to be done via
`vdsm-tool remove-nets`. At the moment, you'd have to edit ifcfg and not
reboot), and re-add the host via a new address.
I hope that helps. If anybody has a smarter way to improve this process,
please speak up.
>
>> What is the correct
procedure to change a host management IP from DHCP to
>> STATIC? Should I make these changes manually on the host or through the
>> NIC settings in the oVirt web interface (when I tried this it just seemed
>> to hang..)
>
> The administration guide
related to host management is here:
>
https://ovirt.org/documentation/admin-guide/chap-Hosts/
> but it doesn't cover the change of the host network configuration.
> Dan and Marcin or some other sysadmin in this list may correct me, but I
> think the correct procedure here is:
> - Put the host to maintenance in the ovirt interface
> - change the nic settings in ovirt web interface
> - activate the host
> Derek, we should probably ensure this case is covered in
the Admin guide.
>
>> Any help is greatly appreciated.
>
>> Thanks!!
>
>
>> Alex
>
>
>
>>
_______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>>
http://lists.ovirt.org/mailman/listinfo/users
>
>
> --
> SANDRO BONAZZOLA
> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG
VIRTUALIZATION R&D
> Red Hat EMEA <
https://www.redhat.com/
> <
https://red.ht/sig
>
TRIED. TESTED. TRUSTED. <
https://redhat.com/trusted
>
<
http://www.teraplan.it/redhat-osd-2017/