4:40 p.m.
Hi
Thanks to all for the great work getting 3.1 out the door, 3.0 is working
well for us and looking forward to playing with all the new features.
At the moment, am having a small problem during initial engine setup where
it fails if selinux is configured as "disabled" - is this intended
behaviour?
- selinux disabled
- reports nfs domain setup as failed
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip-----
Configuring the Default ISO Domain... [ ERROR ]
-- snip
[root@ovirt-m-2 ~]# engine-cleanup
- After setting CONFIG_NFS=no, in the answer file; it gives an explicit
error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip ----
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
-- snip -----
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
Cheers,
Dave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
4:51 p.m.
--_b4596046-7db7-4af9-a84c-2616b9a4c6ec_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
David=2C
Are you using the 3.5.0 kernel? There is currently an issue related to NFS =
which is preventing oVirt 3.1 from working correctly. if you are using 3.5.=
0=2C try using an older kernel and see if that works until an updated kerne=
l is pushed.
- Nick
From: david.elliott(a)shazamteam.com
To: users(a)ovirt.org
Date: Fri=2C 10 Aug 2012 15:40:49 +0100
Subject: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux =
disabled
=20
Hi
=20
Thanks to all for the great work getting 3.1 out the door=2C 3.0 is work=
ing
well for us and looking forward to playing with all the new
features.
=20
At the moment=2C am having a small problem during initial engine setup wh=
ere
it fails if selinux is configured as "disabled" - is this
intended
behaviour?=20
=20
- selinux disabled=20
- reports nfs domain setup as failed=20
=20
[root@ovirt-m-2 ~]# engine-setup
--answer-file=3Dovirt-answers.ovirt-m-2.shazamteam.com
=20
-- snip-----
=20
Configuring the Default ISO Domain... [ ERROR ]
=20
-- snip
=20
[root@ovirt-m-2 ~]# engine-cleanup
=20
- After setting CONFIG_NFS=3Dno=2C in the answer file=3B it gives an expl=
icit
error about selinux during the HTTPD phase
(OVERRIDE_HTTPD_CONFIG=3Dyes)
=20
[root@ovirt-m-2 ~]# engine-setup
--answer-file=3Dovirt-answers.ovirt-m-2.shazamteam.com
=20
-- snip ----=20
=20
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
=20
-- snip -----
=20
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=3Dyes=2C CONFIG_NFS=3Dyes)
=20
Cheers=2C
Dave
=20
=20
=20
=20
=20
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
=
--_b4596046-7db7-4af9-a84c-2616b9a4c6ec_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 12pt=3B
font-family:Calibri
}
--></style></head>
<body class=3D'hmmessage'><div
dir=3D'ltr'>David=2C<br>Are you using the 3.=
5.0 kernel? There is currently an issue related to NFS which is preventing =
oVirt 3.1 from working correctly. if you are using 3.5.0=2C try using an ol=
der kernel and see if that works until an updated kernel is pushed.<br><br>=
- Nick<br><br><div><div
id=3D"SkyDrivePlaceholder"></div>>=3B From: david=
.elliott(a)shazamteam.com<br>&gt=3B To: users(a)ovirt.org<br>&gt=3B Date:
Fri=
=2C 10 Aug 2012 15:40:49 +0100<br>>=3B Subject: [Users] ovirt 3.1 engine =
install fails - fedora 17 with selinux disabled<br>>=3B <br>>=3B
Hi<br>=
>=3B <br>>=3B Thanks to all for the great work getting 3.1 out the
door=
=2C 3.0 is working<br>>=3B well for us and looking forward to playing wi=
th all the new features.<br>>=3B <br>>=3B At the moment=2C am
having a =
small problem during initial engine setup where<br>>=3B it fails if selin=
ux is configured as "disabled" - is this intended<br>>=3B behaviour?
<br>=
>=3B <br>>=3B - selinux disabled <br>>=3B - reports nfs
domain setup =
as failed <br>>=3B <br>>=3B [root@ovirt-m-2 ~]#
engine-setup<br>>=3B =
--answer-file=3Dovirt-answers.ovirt-m-2.shazamteam.com<br>>=3B
<br>>=3B=
-- snip-----<br>>=3B <br>>=3B Configuring the Default ISO
Domain... =
[ ERROR ]<br>>=3B <br>>=3B --
snip<br>>=3B <br>>=3B [=
root@ovirt-m-2 ~]# engine-cleanup<br>>=3B <br>>=3B - After setting
CONF=
IG_NFS=3Dno=2C in the answer file=3B it gives an explicit<br>>=3B error a=
bout selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=3Dyes)<br>>=3B=
<br>>=3B [root@ovirt-m-2 ~]# engine-setup<br>>=3B
--answer-file=3Dovir=
t-answers.ovirt-m-2.shazamteam.com<br>>=3B <br>>=3B -- snip ----
<br>&g=
t=3B <br>>=3B Handling HTTPD... [ ERR=
OR ]<br>>=3B Failed to enable SELinux boolean<br>>=3B
<br>>=3B -- sni=
p -----<br>>=3B <br>>=3B - set selinux to permissive and
reboot<br>>=
=3B - install succeeds (OVERRIDE_HTTPD_CONFIG=3Dyes=2C CONFIG_NFS=3Dyes)<br=
>=3B <br>>=3B Cheers=2C<br>>=3B
Dave<br>>=3B <br>>=3B <br>>=3B=
<br>>=3B <br>>=3B <br>>=3B
_________________________________________=
_____________________________<br>>=3B This email has been scanned by the =
Symantec Email Security.cloud service.<br>>=3B For more information pleas=
e visit http://www.symanteccloud.com<br>>=3B ____________________________=
__________________________________________<br>>=3B ______________________=
_________________________<br>>=3B Users mailing list<br>>=3B
Users@ovir=
t.org<br>>=3B
http://lists.ovirt.org/mailman/listinfo/users<br></div> =
</div></body>
</html>=
--_b4596046-7db7-4af9-a84c-2616b9a4c6ec_--
5:18 p.m.
New subject: [Users] Ang: ovirt 3.1 engine install fails - fedora 17 with selinux disabled
Hi!
I encountered the same problem, and I found this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=835100
reported by Ofer Schreiber.
So it is not intended.
I do have another problem, related to this,though!
I can't set my SELinux to permissive...? In the /etc/selinux/conf file, I change and
put in permissive, save the file and reboot. When the system starts sestatus reports
disabled...? I tried this a couple of times, and I don't know why it's sort of
stuck there...
Idea's...?
regards Johan
-----users-bounces(a)ovirt.org skrev: -----
Till: <users(a)ovirt.org>
Från: David Elliott
Sänt av: users-bounces(a)ovirt.org
Datum: 2012.08.10 16:41
Ärende: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux disabled
Hi
Thanks to all for the great work getting 3.1 out the door, 3.0 is working
well for us and looking forward to playing with all the new features.
At the moment, am having a small problem during initial engine setup where
it fails if selinux is configured as "disabled" - is this intended
behaviour?
- selinux disabled
- reports nfs domain setup as failed
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip-----
Configuring the Default ISO Domain... [ ERROR ]
-- snip
[root@ovirt-m-2 ~]# engine-cleanup
- After setting CONFIG_NFS=no, in the answer file; it gives an explicit
error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip ----
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
-- snip -----
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
Cheers,
Dave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
5:24 p.m.
Hi!
That 3.5 kernel issue is, what I have understood, more related to nfs as storage domain,
not the problem Davis is refering to.
Rgrds Johan
-----users-bounces(a)ovirt.org skrev: -----
Till: David Elliott <david.elliott(a)shazamteam.com>, oVirt Mailing
List <users(a)ovirt.org>
Från: Nicholas Kesick
Sänt av: users-bounces(a)ovirt.org
Datum: 2012.08.10 16:51
Ärende: Re: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux disabled
David,
Are you using the 3.5.0 kernel? There is currently an issue related to NFS which is
preventing oVirt 3.1 from working correctly. if you are using 3.5.0, try using an older
kernel and see if that works until an updated kernel is pushed.
- Nick
From: david.elliott(a)shazamteam.com
To: users(a)ovirt.org
Date: Fri, 10 Aug 2012 15:40:49 +0100
Subject: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux disabled
Hi
Thanks to all for the great work getting 3.1 out the door, 3.0 is working
well for us and looking forward to playing with all the new features.
At the moment, am having a small problem during initial engine setup where
it fails if selinux is configured as "disabled" - is this intended
behaviour?
- selinux disabled
- reports nfs domain setup as failed
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip-----
Configuring the Default ISO Domain... [ ERROR ]
-- snip
[root@ovirt-m-2 ~]# engine-cleanup
- After setting CONFIG_NFS=no, in the answer file; it gives an explicit
error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip ----
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
-- snip -----
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
Cheers,
Dave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:49 p.m.
Hi
That occurred to me as well, but kernel is 3.3.4-5.fc17.x86_64
I've tried this a few times now - and the behaviour is consistent
- fails with selinux disabled
- either at the nfs iso domain phase , or if configured without nfs iso - at
the httpd step
- succeeds with selinux permissive - with both nfs iso domain and httpd
configured
Cheers,
Dave
-----Original Message-----
From: Johan Kragsterman [mailto:johan.kragsterman@capvert.se]
Sent: 10 August 2012 16:25
To: Nicholas Kesick
Cc: David Elliott; oVirt Mailing List
Subject: Re: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux
disabled
Hi!
That 3.5 kernel issue is, what I have understood, more related to nfs as
storage domain, not the problem Davis is refering to.
Rgrds Johan
-----users-bounces(a)ovirt.org skrev: -----
Till: David Elliott <david.elliott(a)shazamteam.com>, oVirt Mailing List
<users(a)ovirt.org>
Från: Nicholas Kesick
Sänt av: users-bounces(a)ovirt.org
Datum: 2012.08.10 16:51
Ärende: Re: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux
disabled
David,
Are you using the 3.5.0 kernel? There is currently an issue related to NFS
which is preventing oVirt 3.1 from working correctly. if you are using
3.5.0, try using an older kernel and see if that works until an updated
kernel is pushed.
- Nick
From: david.elliott(a)shazamteam.com
To: users(a)ovirt.org
Date: Fri, 10 Aug 2012 15:40:49 +0100
Subject: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux
disabled
Hi
Thanks to all for the great work getting 3.1 out the door, 3.0 is working
well for us and looking forward to playing with all the new features.
At the moment, am having a small problem during initial engine setup where
it fails if selinux is configured as "disabled" - is this intended
behaviour?
- selinux disabled
- reports nfs domain setup as failed
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip-----
Configuring the Default ISO Domain... [ ERROR ]
-- snip
[root@ovirt-m-2 ~]# engine-cleanup
- After setting CONFIG_NFS=no, in the answer file; it gives an explicit
error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip ----
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
-- snip -----
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
Cheers,
Dave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
5:01 a.m.
New subject: [Users] Ang: ovirt 3.1 engine install fails - fedora 17 with selinux disabled
Did you try setting it to enabled and then to permissive? I seem to
remember that when you turn SELInux back on, it has to reindex or
something. Maybe you have to go to enabled first before permissive to get
it to do that. Then again, my memory could just be haywire.
On Fri, Aug 10, 2012 at 11:18 AM, Johan Kragsterman <
johan.kragsterman(a)capvert.se> wrote:
Hi!
I encountered the same problem, and I found this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=835100
reported by Ofer Schreiber.
So it is not intended.
I do have another problem, related to this,though!
I can't set my SELinux to permissive...? In the /etc/selinux/conf file, I
change and put in permissive, save the file and reboot. When the system
starts sestatus reports disabled...? I tried this a couple of times, and I
don't know why it's sort of stuck there...
Idea's...?
regards Johan
-----users-bounces(a)ovirt.org skrev: -----
Till: <users(a)ovirt.org>
Från: David Elliott
Sänt av: users-bounces(a)ovirt.org
Datum: 2012.08.10 16:41
Ärende: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux
disabled
Hi
Thanks to all for the great work getting 3.1 out the door, 3.0 is working
well for us and looking forward to playing with all the new features.
At the moment, am having a small problem during initial engine setup where
it fails if selinux is configured as "disabled" - is this intended
behaviour?
- selinux disabled
- reports nfs domain setup as failed
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip-----
Configuring the Default ISO Domain... [ ERROR ]
-- snip
[root@ovirt-m-2 ~]# engine-cleanup
- After setting CONFIG_NFS=no, in the answer file; it gives an explicit
error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
[root@ovirt-m-2 ~]# engine-setup
--answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
-- snip ----
Handling HTTPD... [ ERROR ]
Failed to enable SELinux boolean
-- snip -----
- set selinux to permissive and reboot
- install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
Cheers,
Dave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Gary Scarborough
IST Lab Manager
Rochester Institute of Technology
Rochester NY
9 p.m.
New subject: [Users] Ang: ovirt 3.1 engine install fails - fedora 17 with selinux disabled
Just to verify I had the same problem I then set selinux to enabled.
Rebooted and it reindexed for about 10 minutes. Retried and it installed
fine. I just tried right now so it worked to set selinux to enabled.
Dominic
On Sun, Aug 12, 2012 at 11:01 PM, Gary Scarborough
<virtuallymad(a)gmail.com>wrote:
Did you try setting it to enabled and then to permissive? I seem to
remember that when you turn SELInux back on, it has to reindex or
something. Maybe you have to go to enabled first before permissive to get
it to do that. Then again, my memory could just be haywire.
On Fri, Aug 10, 2012 at 11:18 AM, Johan Kragsterman <
johan.kragsterman(a)capvert.se> wrote:
> Hi!
>
> I encountered the same problem, and I found this bug:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=835100
>
> reported by Ofer Schreiber.
>
> So it is not intended.
>
> I do have another problem, related to this,though!
>
> I can't set my SELinux to permissive...? In the /etc/selinux/conf file,
> I change and put in permissive, save the file and reboot. When the system
> starts sestatus reports disabled...? I tried this a couple of times, and I
> don't know why it's sort of stuck there...
>
> Idea's...?
>
> regards Johan
>
> -----users-bounces(a)ovirt.org skrev: -----
> Till: <users(a)ovirt.org>
> Från: David Elliott
> Sänt av: users-bounces(a)ovirt.org
> Datum: 2012.08.10 16:41
> Ärende: [Users] ovirt 3.1 engine install fails - fedora 17 with selinux
> disabled
>
> Hi
>
> Thanks to all for the great work getting 3.1 out the door, 3.0 is working
> well for us and looking forward to playing with all the new features.
>
> At the moment, am having a small problem during initial engine setup where
> it fails if selinux is configured as "disabled" - is this intended
> behaviour?
>
> - selinux disabled
> - reports nfs domain setup as failed
>
> [root@ovirt-m-2 ~]# engine-setup
> --answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
>
> -- snip-----
>
> Configuring the Default ISO Domain... [ ERROR ]
>
> -- snip
>
> [root@ovirt-m-2 ~]# engine-cleanup
>
> - After setting CONFIG_NFS=no, in the answer file; it gives an explicit
> error about selinux during the HTTPD phase (OVERRIDE_HTTPD_CONFIG=yes)
>
> [root@ovirt-m-2 ~]# engine-setup
> --answer-file=ovirt-answers.ovirt-m-2.shazamteam.com
>
> -- snip ----
>
> Handling HTTPD... [ ERROR ]
> Failed to enable SELinux boolean
>
> -- snip -----
>
> - set selinux to permissive and reboot
> - install succeeds (OVERRIDE_HTTPD_CONFIG=yes, CONFIG_NFS=yes)
>
> Cheers,
> Dave
>
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com
> ______________________________________________________________________
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Gary Scarborough
IST Lab Manager
Rochester Institute of Technology
Rochester NY
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Dominic Kaiser
Greater Boston Vineyard
Director of Operations
cell: 617-230-1412
fax: 617-252-0238
email: dominic(a)bostonvineyard.org
4266
days inactive
4269
days old
6 comments
5 participants
participants (5)
-
David Elliott -
Dominic Kaiser -
Gary Scarborough -
Johan Kragsterman -
Nicholas Kesick