4:19 a.m.
Hi, everyone, if it's not the right mail list, pls point out.. thanks..
I am trying to install the ovirt on my Xeon E5-2650 process on Dell server,
which is installed with Fedora 17. While I create a new host , which
actually is the same server as overt-engine is running.
The host is created ,and starting to "installing". But it ends with "Non
operational state".
Error:
Host CPU type is not compatible with cluster properties, missing CPU
feature: model_sandybridge.
But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also in
Sandy bridge family. And also this error lead my server reboot.
Any help is appreciated.
Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel modules.
. attached is screen shot for error.
9:02 a.m.
New subject: [Users] non-operational state as host does not meet clusters' minimu CPU level.
------=_Part_2673662_127388025.1348149720530
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
wujieke,=20
Can you please run in the host-=20
vdsClient 0 getVdsCaps=20
and post the results?=20
----- Original Message -----
From: "wujieke" <wujieke(a)qiyi.com>
To: node-devel(a)ovirt.org, users(a)ovirt.org
Cc: "wujieke" <wujieke(a)qiyi.com>
Sent: Thursday, September 20, 2012 12:19:10 PM
Subject: [Users] non-operational state as host does not meet
clusters' minimu CPU level.
Hi, everyone, if it=E2=80=99s not the right mail list, pls point
out..
thanks..
I am trying to install the ovirt on my Xeon E5-2650 process on Dell
server, which is installed with Fedora 17. While I create a new host
, which actually is the same server as overt-engine is running.
The host is created ,and starting to =E2=80=9Cinstalling=E2=80=9D. But it=
ends
with
=E2=80=9CNon operational state=E2=80=9D.
Error:
Host CPU type is not compatible with cluster properties, missing CPU
feature: model_sandybridge.
But in my cluster, I select =E2=80=9Csandybridge=E2=80=9D CPU, and my
Xeo=
n C5 is also
in Sandy bridge family. And also this error lead my server reboot.
Any help is appreciated.
Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
modules. . attached is screen shot for error.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
------=_Part_2673662_127388025.1348149720530
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: times new roman,new york,times,serif; font-size: =
12pt; color: #000000'>wujieke,<br>Can you please run in the
host-<br>vdsCli=
ent 0 getVdsCaps<br><br>and post the
results?<br><br><br><hr id=3D"zwchr"><=
blockquote style=3D"border-left:2px solid rgb(16, 16, 255);margin-left:5px;=
padding-left:5px;color:#000;font-weight:normal;font-style:normal;text-decor=
ation:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From:=
</b>"wujieke" &lt;wujieke(a)qiyi.com&gt;<br><b>To:
</b>node-devel(a)ovirt.org,=
users(a)ovirt.org<br><b>Cc: </b>"wujieke"
&lt;wujieke(a)qiyi.com&gt;<br><b>Sen=
t: </b>Thursday, September 20, 2012 12:19:10 PM<br><b>Subject:
</b>[Users] =
non-operational state as host does not meet
clusters' &nbs=
p; minimu CPU
level.<br><br><style><!--
@font-face
=09{font-family:SimSun;
=09panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
=09{font-family:"Cambria Math";
=09panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
=09{font-family:Calibri;
=09panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
=09{font-family:SimSun;
=09panose-1:2 1 6 0 3 1 1 1 1 1;}
p.MsoNormal, li.MsoNormal, div.MsoNormal
=09{margin:0cm;
=09margin-bottom:.0001pt;
=09text-align:justify;
=09text-justify:inter-ideograph;
=09font-size:10.5pt;
=09font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
=09{mso-style-priority:99;
=09color:blue;
=09text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
=09{mso-style-priority:99;
=09color:purple;
=09text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
=09{mso-style-priority:99;
=09mso-style-link:"\6279\6CE8\6846\6587\672C Char";
=09margin:0cm;
=09margin-bottom:.0001pt;
=09text-align:justify;
=09text-justify:inter-ideograph;
=09font-size:9.0pt;
=09font-family:"Calibri","sans-serif";}
span.EmailStyle17
=09{mso-style-type:personal-compose;
=09font-family:"Calibri","sans-serif";
=09color:windowtext;}
span.Char
=09{mso-style-name:"\6279\6CE8\6846\6587\672C Char";
=09mso-style-priority:99;
=09mso-style-link:\6279\6CE8\6846\6587\672C;}
.MsoChpDefault
=09{mso-style-type:export-only;}
@page WordSection1
=09{size:612.0pt 792.0pt;
=09margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.WordSection1
=09{page:WordSection1;}
--></style><div class=3D"WordSection1"><p
class=3D"MsoNormal"><span lang=3D=
"EN-US">Hi, everyone, if it=E2=80=99s not the right mail list, pls point ou=
t.. thanks.. </span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US"> <=
/span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US">I am trying to instal=
l the ovirt on my Xeon E5-2650 process on Dell server, which is installed w=
ith Fedora 17. While I create a new host , which actually is the same serve=
r as overt-engine is running.</span></p><p
class=3D"MsoNormal"><span lang=
=3D"EN-US">The host is created ,and starting to =E2=80=9Cinstalling=E2=80=
=9D. But it ends with =E2=80=9CNon operational state=E2=80=9D.
</span></p><=
p class=3D"MsoNormal"><span
lang=3D"EN-US">Error:</span></p><p class=3D"Mso=
Normal"><span
lang=3D"EN-US"> </span></p><p
class=3D"MsoNormal"><span =
lang=3D"EN-US"> Host CPU type is not compatible with cluster properties, mi=
ssing CPU feature: model_sandybridge. </span></p><p
class=3D"MsoNormal"><sp=
an lang=3D"EN-US"> </span></p><p
class=3D"MsoNormal"><span lang=3D"EN-=
US">But in my cluster, I select =E2=80=9Csandybridge=E2=80=9D CPU, and my X=
eon C5 is also in Sandy bridge family. And also this error lead my se=
rver reboot.</span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US"> </=
span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US">Any help is appreciate=
d. </span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US">Btw: I have enabl=
e INTEL-VT in BIOS. And modprobe KVM and kvm-intel modules. . attached is s=
creen shot for error. </span></p><p
class=3D"MsoNormal"><span lang=3D"EN-US=
"> </span></p><p class=3D"MsoNormal"><span
lang=3D"EN-US"> </span=
</p><p class=3D"MsoNormal"><span
lang=3D"EN-US"> </span></p></div><br=
_______________________________________________<br>Users mailing list<br>U=
sers@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></blockq=
uote><br></div></body></html>
------=_Part_2673662_127388025.1348149720530--
9:04 a.m.
On 09/20/2012 12:19 PM, wujieke wrote:
Hi, everyone, if it’s not the right mail list, pls point out..
thanks..
I am trying to install the ovirt on my Xeon E5-2650 process on Dell
server, which is installed with Fedora 17. While I create a new host ,
which actually is the same server as overt-engine is running.
The host is created ,and starting to “installing”. But it ends with “Non
operational state”.
Error:
Host CPU type is not compatible with cluster properties, missing CPU
feature: model_sandybridge.
But in my cluster, I select “sandybridge” CPU, and my Xeon C5 is also in
Sandy bridge family. And also this error lead my server reboot.
Any help is appreciated.
Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
modules. . attached is screen shot for error.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
please send output of this command from the host (not engine)
vdsClient -s 0 getVdsCaps | grep -i flags
7:54 p.m.
[root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clfl
ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,con
stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmpe
rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,
pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_l
m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,mo
del_coreduo,model_Conroe
seems only support model_Conroe?
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Thursday, September 20, 2012 10:04 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/20/2012 12:19 PM, wujieke wrote:
Hi, everyone, if it's not the right mail list, pls point out..
thanks..
I am trying to install the ovirt on my Xeon E5-2650 process on Dell
server, which is installed with Fedora 17. While I create a new host ,
which actually is the same server as overt-engine is running.
The host is created ,and starting to "installing". But it ends with
"Non operational state".
Error:
Host CPU type is not compatible with cluster properties, missing CPU
feature: model_sandybridge.
But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also
in Sandy bridge family. And also this error lead my server reboot.
Any help is appreciated.
Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
modules. . attached is screen shot for error.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
please send output of this command from the host (not engine) vdsClient -s 0
getVdsCaps | grep -i flags
11:44 p.m.
On 09/21/2012 03:54 AM, wujieke wrote:
[root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clfl
ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,con
stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmpe
rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,
pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_l
m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,mo
del_coreduo,model_Conroe
seems only support model_Conroe?
and output of: virsh capabilities?
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Thursday, September 20, 2012 10:04 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/20/2012 12:19 PM, wujieke wrote:
> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>
> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
> server, which is installed with Fedora 17. While I create a new host ,
> which actually is the same server as overt-engine is running.
>
> The host is created ,and starting to "installing". But it ends with
> "Non operational state".
>
> Error:
>
> Host CPU type is not compatible with cluster properties, missing CPU
> feature: model_sandybridge.
>
> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also
> in Sandy bridge family. And also this error lead my server reboot.
>
> Any help is appreciated.
>
> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
> modules. . attached is screen shot for error.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
please send output of this command from the host (not engine) vdsClient -s 0
getVdsCaps | grep -i flags
12:01 a.m.
I follow the wiki page to re-install ovirt with all-in-one version . my
local host in ovirt is working now.
Thanks a lot.
Btw: the cmd " virsh capabilities" complains out :
[root@localhost ~]# virsh capabilities
Please enter your authentication name:
Please enter your password:
error: Failed to reconnect to the hypervisor
error: no valid connection
error: authentication failed: Failed to step SASL negotiation: -1 (SASL(-1):
generic failure: All-whitespace username.)
any idea?
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 12:44 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 03:54 AM, wujieke wrote:
[root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse3
6,clfl
ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,
lm,con
stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,ap
erfmpe
rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr
,pdcm,
pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,
lahf_l
m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,v
pid,mo
del_coreduo,model_Conroe
seems only support model_Conroe?
and output of: virsh capabilities?
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Thursday, September 20, 2012 10:04 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/20/2012 12:19 PM, wujieke wrote:
> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>
> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
> server, which is installed with Fedora 17. While I create a new host
> , which actually is the same server as overt-engine is running.
>
> The host is created ,and starting to "installing". But it ends with
> "Non operational state".
>
> Error:
>
> Host CPU type is not compatible with cluster properties, missing CPU
> feature: model_sandybridge.
>
> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also
> in Sandy bridge family. And also this error lead my server reboot.
>
> Any help is appreciated.
>
> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
> modules. . attached is screen shot for error.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
please send output of this command from the host (not engine)
vdsClient -s 0 getVdsCaps | grep -i flags
1:14 a.m.
On 09/21/2012 01:01 PM, wujieke wrote:
I follow the wiki page to re-install ovirt with all-in-one version .
my
local host in ovirt is working now.
Thanks a lot.
Btw: the cmd " virsh capabilities" complains out :
[root@localhost ~]# virsh capabilities
Please enter your authentication name:
Please enter your password:
error: Failed to reconnect to the hypervisor
error: no valid connection
error: authentication failed: Failed to step SASL negotiation: -1 (SASL(-1):
generic failure: All-whitespace username.)
any idea?
Please try "virsh -r capabilities"
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 12:44 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 03:54 AM, wujieke wrote:
> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse3
> 6,clfl
> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,
> lm,con
> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,ap
> erfmpe
> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr
> ,pdcm,
> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,
> lahf_l
> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,v
> pid,mo
> del_coreduo,model_Conroe
>
> seems only support model_Conroe?
and output of: virsh capabilities?
> -----Original Message-----
> From: Itamar Heim [mailto:iheim@redhat.com]
> Sent: Thursday, September 20, 2012 10:04 PM
> To: wujieke
> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet clusters'
> minimu CPU level.
>
> On 09/20/2012 12:19 PM, wujieke wrote:
>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>
>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>> server, which is installed with Fedora 17. While I create a new host
>> , which actually is the same server as overt-engine is running.
>>
>> The host is created ,and starting to "installing". But it ends with
>> "Non operational state".
>>
>> Error:
>>
>> Host CPU type is not compatible with cluster properties, missing CPU
>> feature: model_sandybridge.
>>
>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also
>> in Sandy bridge family. And also this error lead my server reboot.
>>
>> Any help is appreciated.
>>
>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>> modules. . attached is screen shot for error.
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> please send output of this command from the host (not engine)
> vdsClient -s 0 getVdsCaps | grep -i flags
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
1:24 a.m.
Thanks a lot. Mark.
Attach output for reference.
-----Original Message-----
From: Mark Wu [mailto:wudxw@linux.vnet.ibm.com]
Sent: Friday, September 21, 2012 2:15 PM
To: wujieke
Cc: 'Itamar Heim'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 01:01 PM, wujieke wrote:
I follow the wiki page to re-install ovirt with all-in-one version .
my local host in ovirt is working now.
Thanks a lot.
Btw: the cmd " virsh capabilities" complains out :
[root@localhost ~]# virsh capabilities Please enter your
authentication name:
Please enter your password:
error: Failed to reconnect to the hypervisor
error: no valid connection
error: authentication failed: Failed to step SASL negotiation: -1
(SASL(-1):
generic failure: All-whitespace username.)
any idea?
Please try "virsh -r capabilities"
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 12:44 PM
To: wujieke
Cc: node-devel(a)ovirt.org; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 03:54 AM, wujieke wrote:
> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse
> 3
> 6,clfl
> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp
> ,
> lm,con
> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,a
> p
> erfmpe
> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtp
> r
> ,pdcm,
> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx
> ,
> lahf_l
> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,
> v
> pid,mo
> del_coreduo,model_Conroe
>
> seems only support model_Conroe?
and output of: virsh capabilities?
> -----Original Message-----
> From: Itamar Heim [mailto:iheim@redhat.com]
> Sent: Thursday, September 20, 2012 10:04 PM
> To: wujieke
> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet
clusters'
> minimu CPU level.
>
> On 09/20/2012 12:19 PM, wujieke wrote:
>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>
>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>> server, which is installed with Fedora 17. While I create a new host
>> , which actually is the same server as overt-engine is running.
>>
>> The host is created ,and starting to "installing". But it ends with
>> "Non operational state".
>>
>> Error:
>>
>> Host CPU type is not compatible with cluster properties, missing CPU
>> feature: model_sandybridge.
>>
>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is
>> also in Sandy bridge family. And also this error lead my server reboot.
>>
>> Any help is appreciated.
>>
>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>> modules. . attached is screen shot for error.
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> please send output of this command from the host (not engine)
> vdsClient -s 0 getVdsCaps | grep -i flags
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:56 a.m.
On 09/21/2012 09:24 AM, wujieke wrote:
Thanks a lot. Mark.
Attach output for reference.
ok, so libvirt/virsh detect sandybridge, but vdsm only reports conroe.
there used to be a bug around this in vdsm - which version of vdsm are
you running?
-----Original Message-----
From: Mark Wu [mailto:wudxw@linux.vnet.ibm.com]
Sent: Friday, September 21, 2012 2:15 PM
To: wujieke
Cc: 'Itamar Heim'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 01:01 PM, wujieke wrote:
> I follow the wiki page to re-install ovirt with all-in-one version .
> my local host in ovirt is working now.
> Thanks a lot.
>
> Btw: the cmd " virsh capabilities" complains out :
>
> [root@localhost ~]# virsh capabilities Please enter your
> authentication name:
> Please enter your password:
> error: Failed to reconnect to the hypervisor
> error: no valid connection
> error: authentication failed: Failed to step SASL negotiation: -1
(SASL(-1):
> generic failure: All-whitespace username.)
>
> any idea?
Please try "virsh -r capabilities"
>
> -----Original Message-----
> From: Itamar Heim [mailto:iheim@redhat.com]
> Sent: Friday, September 21, 2012 12:44 PM
> To: wujieke
> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet clusters'
> minimu CPU level.
>
> On 09/21/2012 03:54 AM, wujieke wrote:
>> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
>> cpuFlags =
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse
>> 3
>> 6,clfl
>> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp
>> ,
>> lm,con
>> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,a
>> p
>> erfmpe
>> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtp
>> r
>> ,pdcm,
>> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx
>> ,
>> lahf_l
>> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,
>> v
>> pid,mo
>> del_coreduo,model_Conroe
>>
>> seems only support model_Conroe?
> and output of: virsh capabilities?
>
>
>> -----Original Message-----
>> From: Itamar Heim [mailto:iheim@redhat.com]
>> Sent: Thursday, September 20, 2012 10:04 PM
>> To: wujieke
>> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
>> Subject: Re: [Users] non-operational state as host does not meet
clusters'
>> minimu CPU level.
>>
>> On 09/20/2012 12:19 PM, wujieke wrote:
>>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>>
>>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>>> server, which is installed with Fedora 17. While I create a new host
>>> , which actually is the same server as overt-engine is running.
>>>
>>> The host is created ,and starting to "installing". But it ends
with
>>> "Non operational state".
>>>
>>> Error:
>>>
>>> Host CPU type is not compatible with cluster properties, missing CPU
>>> feature: model_sandybridge.
>>>
>>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is
>>> also in Sandy bridge family. And also this error lead my server reboot.
>>>
>>> Any help is appreciated.
>>>
>>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>>> modules. . attached is screen shot for error.
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> please send output of this command from the host (not engine)
>> vdsClient -s 0 getVdsCaps | grep -i flags
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
3:14 a.m.
Some packages info.
[root@localhost ~]# rpm -qa | grep vdsm
vdsm-bootstrap-4.10.0-7.fc17.noarch
vdsm-xmlrpc-4.10.0-7.fc17.noarch
vdsm-python-4.10.0-7.fc17.x86_64
vdsm-4.10.0-7.fc17.x86_64
vdsm-cli-4.10.0-7.fc17.noarch
[root@localhost ~]# rpm -qa | grep ovirt
ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch
ovirt-engine-notification-service-3.1.0-2.fc17.noarch
ovirt-engine-dbscripts-3.1.0-2.fc17.noarch
ovirt-engine-3.1.0-2.fc17.noarch
ovirt-release-fedora-4-2.noarch
ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch
ovirt-engine-setup-3.1.0-2.fc17.noarch
ovirt-engine-webadmin-portal-3.1.0-2.fc17.noarch
ovirt-engine-setup-plugin-allinone-3.1.0-2.fc17.noarch
ovirt-engine-sdk-3.1.0.4-1.fc17.noarch
ovirt-engine-backend-3.1.0-2.fc17.noarch
ovirt-engine-config-3.1.0-2.fc17.noarch
ovirt-engine-userportal-3.1.0-2.fc17.noarch
ovirt-engine-genericapi-3.1.0-2.fc17.noarch
ovirt-engine-restapi-3.1.0-2.fc17.noarch
ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch
ovirt-engine-tools-common-3.1.0-2.fc17.noarch
[root@localhost ~]# cat /etc/issue
Fedora release 17 (Beefy Miracle)
Kernel \r on an \m (\l)
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 3:57 PM
To: wujieke
Cc: 'Mark Wu'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 09:24 AM, wujieke wrote:
Thanks a lot. Mark.
Attach output for reference.
ok, so libvirt/virsh detect sandybridge, but vdsm only reports conroe.
there used to be a bug around this in vdsm - which version of vdsm are you
running?
-----Original Message-----
From: Mark Wu [mailto:wudxw@linux.vnet.ibm.com]
Sent: Friday, September 21, 2012 2:15 PM
To: wujieke
Cc: 'Itamar Heim'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 01:01 PM, wujieke wrote:
> I follow the wiki page to re-install ovirt with all-in-one version .
> my local host in ovirt is working now.
> Thanks a lot.
>
> Btw: the cmd " virsh capabilities" complains out :
>
> [root@localhost ~]# virsh capabilities Please enter your
> authentication name:
> Please enter your password:
> error: Failed to reconnect to the hypervisor
> error: no valid connection
> error: authentication failed: Failed to step SASL negotiation: -1
(SASL(-1):
> generic failure: All-whitespace username.)
>
> any idea?
Please try "virsh -r capabilities"
>
> -----Original Message-----
> From: Itamar Heim [mailto:iheim@redhat.com]
> Sent: Friday, September 21, 2012 12:44 PM
> To: wujieke
> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet
clusters'
> minimu CPU level.
>
> On 09/21/2012 03:54 AM, wujieke wrote:
>> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
>> cpuFlags =
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,ps
>> e
>> 3
>> 6,clfl
>> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtsc
>> p
>> ,
>> lm,con
>> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,
>> a
>> p
>> erfmpe
>> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xt
>> p
>> r
>> ,pdcm,
>> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,av
>> x
>> ,
>> lahf_l
>> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept
>> ,
>> v
>> pid,mo
>> del_coreduo,model_Conroe
>>
>> seems only support model_Conroe?
> and output of: virsh capabilities?
>
>
>> -----Original Message-----
>> From: Itamar Heim [mailto:iheim@redhat.com]
>> Sent: Thursday, September 20, 2012 10:04 PM
>> To: wujieke
>> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
>> Subject: Re: [Users] non-operational state as host does not meet
clusters'
>> minimu CPU level.
>>
>> On 09/20/2012 12:19 PM, wujieke wrote:
>>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>>
>>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>>> server, which is installed with Fedora 17. While I create a new
>>> host , which actually is the same server as overt-engine is running.
>>>
>>> The host is created ,and starting to "installing". But it ends with
>>> "Non operational state".
>>>
>>> Error:
>>>
>>> Host CPU type is not compatible with cluster properties, missing
>>> CPU
>>> feature: model_sandybridge.
>>>
>>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is
>>> also in Sandy bridge family. And also this error lead my server
reboot.
>>>
>>> Any help is appreciated.
>>>
>>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>>> modules. . attached is screen shot for error.
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> please send output of this command from the host (not engine)
>> vdsClient -s 0 getVdsCaps | grep -i flags
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
7:37 a.m.
currently, I create a cluster with Conroe family. My host/node works. And I
can create some VMs on it.
But I am not sure if the issue talking here will impact the VM's
performance? Or stability ?
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 3:57 PM
To: wujieke
Cc: 'Mark Wu'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 09:24 AM, wujieke wrote:
Thanks a lot. Mark.
Attach output for reference.
ok, so libvirt/virsh detect sandybridge, but vdsm only reports conroe.
there used to be a bug around this in vdsm - which version of vdsm are you
running?
-----Original Message-----
From: Mark Wu [mailto:wudxw@linux.vnet.ibm.com]
Sent: Friday, September 21, 2012 2:15 PM
To: wujieke
Cc: 'Itamar Heim'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 01:01 PM, wujieke wrote:
> I follow the wiki page to re-install ovirt with all-in-one version .
> my local host in ovirt is working now.
> Thanks a lot.
>
> Btw: the cmd " virsh capabilities" complains out :
>
> [root@localhost ~]# virsh capabilities Please enter your
> authentication name:
> Please enter your password:
> error: Failed to reconnect to the hypervisor
> error: no valid connection
> error: authentication failed: Failed to step SASL negotiation: -1
(SASL(-1):
> generic failure: All-whitespace username.)
>
> any idea?
Please try "virsh -r capabilities"
>
> -----Original Message-----
> From: Itamar Heim [mailto:iheim@redhat.com]
> Sent: Friday, September 21, 2012 12:44 PM
> To: wujieke
> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet
clusters'
> minimu CPU level.
>
> On 09/21/2012 03:54 AM, wujieke wrote:
>> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
>> cpuFlags =
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,ps
>> e
>> 3
>> 6,clfl
>> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtsc
>> p
>> ,
>> lm,con
>> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,
>> a
>> p
>> erfmpe
>> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xt
>> p
>> r
>> ,pdcm,
>> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,av
>> x
>> ,
>> lahf_l
>> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept
>> ,
>> v
>> pid,mo
>> del_coreduo,model_Conroe
>>
>> seems only support model_Conroe?
> and output of: virsh capabilities?
>
>
>> -----Original Message-----
>> From: Itamar Heim [mailto:iheim@redhat.com]
>> Sent: Thursday, September 20, 2012 10:04 PM
>> To: wujieke
>> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
>> Subject: Re: [Users] non-operational state as host does not meet
clusters'
>> minimu CPU level.
>>
>> On 09/20/2012 12:19 PM, wujieke wrote:
>>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>>
>>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>>> server, which is installed with Fedora 17. While I create a new
>>> host , which actually is the same server as overt-engine is running.
>>>
>>> The host is created ,and starting to "installing". But it ends with
>>> "Non operational state".
>>>
>>> Error:
>>>
>>> Host CPU type is not compatible with cluster properties, missing
>>> CPU
>>> feature: model_sandybridge.
>>>
>>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is
>>> also in Sandy bridge family. And also this error lead my server
reboot.
>>>
>>> Any help is appreciated.
>>>
>>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>>> modules. . attached is screen shot for error.
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> please send output of this command from the host (not engine)
>> vdsClient -s 0 getVdsCaps | grep -i flags
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
8:31 a.m.
On 09/21/2012 03:37 PM, wujieke wrote:
currently, I create a cluster with Conroe family. My host/node works.
And I
can create some VMs on it.
But I am not sure if the issue talking here will impact the VM's
performance? Or stability ?
performance only, and mostly for guests utilizing new westmere features.
i think this patch was around this
not sure if its in 4.10.0-7.fc17 or a new issue
commit 498d1dd6f01a7f5488792c41f73f7cca57b2c890
Author: Gal Hammer <ghammer(a)redhat.com>
Date: Mon Jun 4 17:55:35 2012 +0300
BZ#737104 Disallow cross-vendor virtualization.
Find vendor for all cpu models, including those based on another
cpu module.
Change-Id: Id52f757971e28058257d819036e58e0f1925c44d
Signed-off-by: Gal Hammer <ghammer(a)redhat.com>
Reviewed-on: http://gerrit.ovirt.org/5035
Reviewed-by: Dan Kenigsberg <danken(a)redhat.com>
diff --git a/vdsm/caps.py b/vdsm/caps.py
index d89099a..7aeedf8 100644
--- a/vdsm/caps.py
+++ b/vdsm/caps.py
@@ -103,20 +103,35 @@ def _getEmulatedMachines():
return [ m.firstChild.toxml() for m in
guestTag.getElementsByTagName('machine') ]
+def _getAllCpuModels():
+ cpu_map = minidom.parseString(
+ file('/usr/share/libvirt/cpu_map.xml').read())
+
+ allModels = dict()
+ for m in cpu_map.getElementsByTagName('arch')[0].childNodes:
+ if m.nodeName != 'model':
+ continue
+ element = m.getElementsByTagName('vendor')
+ if element:
+ vendor = element[0].getAttribute('name')
+ else:
+ # If current model doesn't have a vendor, check if it has a
model
+ # that it is based on. The models in the cpu_map.xml file are
+ # sorted in a way that the base model is always defined before.
+ element = m.getElementsByTagName('model')
+ if element:
+ vendor = allModels.get(element[0].getAttribute('name'),
None)
+ else:
+ vendor = None
+ allModels[m.getAttribute('name')] = vendor
+
+ return allModels
+
@utils.memoized
def _getCompatibleCpuModels():
c = libvirtconnection.get()
- cpu_map = minidom.parseString(
- file('/usr/share/libvirt/cpu_map.xml').read())
- def vendor(modelElem):
- vs = modelElem.getElementsByTagName('vendor')
- if vs:
- return vs[0].getAttribute('name')
- else:
- return None
- allModels = [ (m.getAttribute('name'), vendor(m)) for m
- in cpu_map.getElementsByTagName('arch')[0].childNodes
- if m.nodeName == 'model' ]
+ allModels = _getAllCpuModels()
+
def compatible(model, vendor):
if not vendor:
return False
@@ -133,7 +148,7 @@ def _getCompatibleCpuModels():
raise
return [ 'model_' + model for (model, vendor)
- in allModels if compatible(model, vendor) ]
+ in allModels.iteritems() if compatible(model, vendor) ]
def _parseKeyVal(lines, delim='='):
d = {}
-----Original Message-----
From: Itamar Heim [mailto:iheim@redhat.com]
Sent: Friday, September 21, 2012 3:57 PM
To: wujieke
Cc: 'Mark Wu'; users(a)ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.
On 09/21/2012 09:24 AM, wujieke wrote:
> Thanks a lot. Mark.
>
> Attach output for reference.
ok, so libvirt/virsh detect sandybridge, but vdsm only reports conroe.
there used to be a bug around this in vdsm - which version of vdsm are you
running?
>
> -----Original Message-----
> From: Mark Wu [mailto:wudxw@linux.vnet.ibm.com]
> Sent: Friday, September 21, 2012 2:15 PM
> To: wujieke
> Cc: 'Itamar Heim'; users(a)ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet clusters'
> minimu CPU level.
>
> On 09/21/2012 01:01 PM, wujieke wrote:
>> I follow the wiki page to re-install ovirt with all-in-one version .
>> my local host in ovirt is working now.
>> Thanks a lot.
>>
>> Btw: the cmd " virsh capabilities" complains out :
>>
>> [root@localhost ~]# virsh capabilities Please enter your
>> authentication name:
>> Please enter your password:
>> error: Failed to reconnect to the hypervisor
>> error: no valid connection
>> error: authentication failed: Failed to step SASL negotiation: -1
> (SASL(-1):
>> generic failure: All-whitespace username.)
>>
>> any idea?
> Please try "virsh -r capabilities"
>>
>> -----Original Message-----
>> From: Itamar Heim [mailto:iheim@redhat.com]
>> Sent: Friday, September 21, 2012 12:44 PM
>> To: wujieke
>> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
>> Subject: Re: [Users] non-operational state as host does not meet
clusters'
>> minimu CPU level.
>>
>> On 09/21/2012 03:54 AM, wujieke wrote:
>>> [root@localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
>>> cpuFlags =
>>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,ps
>>> e
>>> 3
>>> 6,clfl
>>> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtsc
>>> p
>>> ,
>>> lm,con
>>> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,
>>> a
>>> p
>>> erfmpe
>>> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xt
>>> p
>>> r
>>> ,pdcm,
>>> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,av
>>> x
>>> ,
>>> lahf_l
>>> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept
>>> ,
>>> v
>>> pid,mo
>>> del_coreduo,model_Conroe
>>>
>>> seems only support model_Conroe?
>> and output of: virsh capabilities?
>>
>>
>>> -----Original Message-----
>>> From: Itamar Heim [mailto:iheim@redhat.com]
>>> Sent: Thursday, September 20, 2012 10:04 PM
>>> To: wujieke
>>> Cc: node-devel(a)ovirt.org; users(a)ovirt.org
>>> Subject: Re: [Users] non-operational state as host does not meet
> clusters'
>>> minimu CPU level.
>>>
>>> On 09/20/2012 12:19 PM, wujieke wrote:
>>>> Hi, everyone, if it's not the right mail list, pls point out..
thanks..
>>>>
>>>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>>>> server, which is installed with Fedora 17. While I create a new
>>>> host , which actually is the same server as overt-engine is running.
>>>>
>>>> The host is created ,and starting to "installing". But it ends
with
>>>> "Non operational state".
>>>>
>>>> Error:
>>>>
>>>> Host CPU type is not compatible with cluster properties, missing
>>>> CPU
>>>> feature: model_sandybridge.
>>>>
>>>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5
is
>>>> also in Sandy bridge family. And also this error lead my server
reboot.
>>>>
>>>> Any help is appreciated.
>>>>
>>>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>>>> modules. . attached is screen shot for error.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>> please send output of this command from the host (not engine)
>>> vdsClient -s 0 getVdsCaps | grep -i flags
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
5:33 a.m.
New subject: [Users] [node-devel] non-operational state as host does not meet clusters' minimu CPU level.
On Fri, Sep 21, 2012 at 7:01 AM, wujieke <wujieke(a)qiyi.com> wrote:
[root@localhost ~]# virsh capabilities
Please enter your authentication name:
vdsm protects r/w libvirt socket, to avoid administrators accidentaly
mess up w/ VMs under its control.
You can use r/o connection virsh -r capabilities
Cheers,
Alan
4226
days inactive
4229
days old
12 comments
5 participants
participants (5)
-
Alan Pevec -
Doron Fediuck -
Itamar Heim -
Mark Wu -
wujieke