1:42 p.m.
Hi,
We are making our first attempt at importing VM's from VMWare, i am able to
connect to our VMWare environment and i can choose a VM to import and i am
able to start the process. A VM is created, the disk is created as well
then the task completes in ovirt. Looking at my virtual machines, the vm
shows up with a red arrow and a lock next to it.
After that there are no tasks that appear. Is there a way to monitor the
import process of the VM?
Currently running Ovirt 4.04.
Thanks
5:36 p.m.
Hi,
during the import process engine shows status like "Initializing",
"Copying disk x/y" and "Finishing" next to the VM.
Could you check in the engine status of the import task? Did it finish
successfully or with an error? You can also check the vdsm.log for any
errors.
Best regards,
Tomas
On Mon, 24 Oct 2016 13:42:44 -0500
"Bryan Sockel" <Bryan.Sockel(a)altn.com> wrote:
Hi,
We are making our first attempt at importing VM's from VMWare, i am able to
connect to our VMWare environment and i can choose a VM to import and i am
able to start the process. A VM is created, the disk is created as well
then the task completes in ovirt. Looking at my virtual machines, the vm
shows up with a red arrow and a lock next to it.
After that there are no tasks that appear. Is there a way to monitor the
import process of the VM?
Currently running Ovirt 4.04.
Thanks
--
Tomáš Golembiovský <tgolembi(a)redhat.com>
3:50 p.m.
The process finished successfully, took about 4 hours per vm, not sure if
this is typical or not, but this being our first test run i was afraid that
it may have stopped and was unsure. I will check the VDSM.log file on the
next test migration i do.
Thanks
-----Original Message-----
From: Tomáš Golembiovský <tgolembi(a)redhat.com>
To: "Bryan Sockel" <Bryan.Sockel(a)altn.com>
Cc: "users(a)ovirt.org" <users(a)ovirt.org>
Date: Tue, 25 Oct 2016 00:36:50 +0200
Subject: Re: [ovirt-users] Importing VM's from VMware
Hi,
during the import process engine shows status like "Initializing",
"Copying disk x/y" and "Finishing" next to the VM.
Could you check in the engine status of the import task? Did it finish
successfully or with an error? You can also check the vdsm.log for any
errors.
Best regards,
Tomas
On Mon, 24 Oct 2016 13:42:44 -0500
"Bryan Sockel" <Bryan.Sockel(a)altn.com> wrote:
Hi,
We are making our first attempt at importing VM's from VMWare, i am able
to
connect to our VMWare environment and i can choose a VM to import and
i am
able to start the process. A VM is created, the disk is created as well
then the task completes in ovirt. Looking at my virtual machines, the vm
shows up with a red arrow and a lock next to it.
After that there are no tasks that appear. Is there a way to monitor the
import process of the VM?
Currently running Ovirt 4.04.
Thanks
--
Tomáš Golembiovský <tgolembi(a)redhat.com>
4:10 p.m.
On Oct 26, 2016 11:51 PM, "Bryan Sockel" <Bryan.Sockel(a)altn.com> wrote:
The process finished successfully, took about 4 hours per vm, not sure if
this is
typical or not, but this being our first test run i was afraid that
it may have stopped and was unsure. I will check the VDSM.log file on the
next test migration i do.
What was the size of the disks and what was the network interfaces speed on
both sides?
What is the storage performance on both?
Y.
Thanks
>
> -----Original Message-----
> From: Tomáš Golembiovský <tgolembi(a)redhat.com>
> To: "Bryan Sockel" <Bryan.Sockel(a)altn.com>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Date: Tue, 25 Oct 2016 00:36:50 +0200
> Subject: Re: [ovirt-users] Importing VM's from VMware
>
> Hi,
>
> during the import process engine shows status like "Initializing",
> "Copying disk x/y" and "Finishing" next to the VM.
>
> Could you check in the engine status of the import task? Did it finish
> successfully or with an error? You can also check the vdsm.log for any
> errors.
>
>
> Best regards,
>
> Tomas
>
>
> On Mon, 24 Oct 2016 13:42:44 -0500
> "Bryan Sockel" <Bryan.Sockel(a)altn.com> wrote:
>
> > Hi,
> >
> > We are making our first attempt at importing VM's from VMWare, i am
able to
> > connect to our VMWare environment and i can choose a VM to
import and
i am
> > able to start the process. A VM is created, the disk is
created as
well
> > then the task completes in ovirt. Looking at my virtual
machines, the
vm
> > shows up with a red arrow and a lock next to it.
> >
> > After that there are no tasks that appear. Is there a way to monitor
the
> > import process of the VM?
> >
> > Currently running Ovirt 4.04.
> >
> > Thanks
>
>
> --
> Tomáš Golembiovský <tgolembi(a)redhat.com>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2761
days inactive
2763
days old
3 comments
3 participants
participants (3)
-
Bryan Sockel -
Tomáš Golembiovský -
Yaniv Kaul