9:01 p.m.
--_000_EE4D679B9474414187D2E27D8B6890F693A9D1G08CNEXMBPEKD03g0_
Content-Type: text/plain; charset="gb2312"
Content-Transfer-Encoding: base64
SGksYWxsDQogICAgICAgICBSZWNlbnRseSBJIHRlc3QgdGhlIFZMQU4gYW5kIGhhdmUgc29tZSBw
cm9ibGVtcy4gSSBjb25maWd1cmUgdGhlIExvZ2ljYWwgbmV0d29yayChsHRlc3R2bGFuobEgd2l0
aCChsFZMQU4gdGFnZ2VkobEgYW5kIGFzc2lnbmVkIGl0IHRvIGhvc3Rzoa8gTklDLiBUaGVuIEkg
Y3JlYXRlIGEgVk0gdXNpbmcgIKGwdGVzdHZsYW6hsSBhbmQgZm91bmQgdGhlIHZtIGNhbqGvdCBn
ZXQgSVAgLiBEb2VzIGFueW9uZSBoYXZlIHNvbWUgaWRlYXMgYWJvdXQgVkxBTj8NCiAgICAgICAg
IHAucy4gSSBhbHJlYWR5IGNvbmZpZ3VyZSB0aGUgc3dpdGNoIHBvcnQgYXMgVFJVTksgbW9kZSBh
bmQgdGhlIHZsYW4gaWQgaXMgMSAoZGVmYXVsdCB2YWx1ZSkuDQo=
--_000_EE4D679B9474414187D2E27D8B6890F693A9D1G08CNEXMBPEKD03g0_
Content-Type: text/html; charset="gb2312"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word"
=
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml"
xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html;
charset=3Dgb2312">
<meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered
medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:=CB=CE=CC=E5;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"\@=CB=CE=CC=E5";
panose-1:2 1 6 0 3 1 1 1 1 1;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
text-align:justify;
text-justify:inter-ideograph;
font-size:10.5pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
/* Page Definitions */
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"ZH-CN" link=3D"blue" vlink=3D"purple"
style=3D"text-justify-t=
rim:punctuation">
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span
lang=3D"EN-US">Hi,all<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
lang=3D"EN-US"> &=
nbsp; Recently I test the VLAN and have some problems. I config=
ure the Logical network =A1=B0testvlan=A1=B1 with =A1=B0VLAN tagged=A1=B1 a=
nd assigned it to hosts=A1=AF NIC. Then I create a VM using =A1=B0tes=
tvlan=A1=B1 and found the vm can=A1=AFt get IP
. Does anyone have some ideas about VLAN?<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
lang=3D"EN-US"> &=
nbsp; p.s. I already configure the switch port as TRUNK mode an=
d the vlan id is 1 (default value).
<o:p></o:p></span></p>
</div>
</body>
</html>
--_000_EE4D679B9474414187D2E27D8B6890F693A9D1G08CNEXMBPEKD03g0_--
2:09 a.m.
On 19/11/14 05:01, Xie, Chao wrote:
Hi,all
Recently I test the VLAN and have some problems. I configure
the Logical network “testvlan” with “VLAN tagged” and assigned it to
hosts’ NIC. Then I create a VM using “testvlan” and found the vm can’t
get IP . Does anyone have some ideas about VLAN?
p.s. I already configure the switch port as TRUNK mode and the
vlan id is 1 (default value).
Which switch port? Maybe the port(s) leading to your DHCP server aren't
configured to allow traffic on this VLAN?
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:45 a.m.
New subject: 答复: How to Use VLAN?
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:09
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: [ovirt-users] How to Use VLAN?
On 19/11/14 05:01, Xie, Chao wrote:
Hi,all
Recently I test the VLAN and have some problems. I configure
the Logical network “testvlan” with “VLAN tagged” and assigned it to
hosts’ NIC. Then I create a VM using “testvlan” and found the vm
can’t get IP . Does anyone have some ideas about VLAN?
p.s. I already configure the switch port as TRUNK mode and
the vlan id is 1 (default value).
Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to
allow traffic on this VLAN?
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:50 a.m.
New subject: 答复: How to Use VLAN?
On 19/11/14 10:45, Xie, Chao wrote:
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
Hello Xie,
This is what leads me to believe that your DHCP server (which is in
charge of allocating IP addresses) only receives non-tagged traffic. Is
it possible you need to configure other ports to pass the VLAN-tagged
traffic?
Lior.
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:09
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: [ovirt-users] How to Use VLAN?
On 19/11/14 05:01, Xie, Chao wrote:
> Hi,all
>
> Recently I test the VLAN and have some problems. I configure
> the Logical network “testvlan” with “VLAN tagged” and assigned it to
> hosts’ NIC. Then I create a VM using “testvlan” and found the vm
> can’t get IP . Does anyone have some ideas about VLAN?
>
> p.s. I already configure the switch port as TRUNK mode and
> the vlan id is 1 (default value).
>
Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to
allow traffic on this VLAN?
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
7:34 p.m.
New subject: 答复: 答复: How to Use VLAN?
Hi, Lior
Thanks for replying. Yesterday I tested VLAN successfully in the normal 3.5
environment. As the release Note, (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted
Engine 3.5 supports the new function of VLAN。 Is it meaning the "rhevm" logical
network use "VLAN" ? If I am right, can you help to teach me how to use it? (I
think it must be creating a VLAN manually before deploy hosted engine, then we should
choose the vlan when deploying?)
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:50
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: 答复: [ovirt-users] How to Use VLAN?
On 19/11/14 10:45, Xie, Chao wrote:
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
Hello Xie,
This is what leads me to believe that your DHCP server (which is in charge of allocating
IP addresses) only receives non-tagged traffic. Is it possible you need to configure other
ports to pass the VLAN-tagged traffic?
Lior.
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:09
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: [ovirt-users] How to Use VLAN?
On 19/11/14 05:01, Xie, Chao wrote:
> Hi,all
>
> Recently I test the VLAN and have some problems. I configure
> the Logical network “testvlan” with “VLAN tagged” and assigned it to
> hosts’ NIC. Then I create a VM using “testvlan” and found the vm
> can’t get IP . Does anyone have some ideas about VLAN?
>
> p.s. I already configure the switch port as TRUNK mode and
> the vlan id is 1 (default value).
>
Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to
allow traffic on this VLAN?
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
5:21 a.m.
New subject: 答复: 答复: 答复: How to Use VLAN?
Hi,All
Does anybody know how to use VLAN in Hosted Engine 3.5 as new feature?(According to the
http://www.ovirt.org/OVirt_3.5_Release_Notes, VLAN is a new function in Hosted Engine
3.5)
-----邮件原件-----
发件人: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] 代表 Xie, Chao
发送时间: 2014年11月21日 9:35
收件人: Lior Vernia
抄送: users(a)ovirt.org
主题: [ovirt-users] 答复: 答复: How to Use VLAN?
Hi, Lior
Thanks for replying. Yesterday I tested VLAN successfully in the normal 3.5
environment. As the release Note, (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted
Engine 3.5 supports the new function of VLAN。 Is it meaning the "rhevm" logical
network use "VLAN" ? If I am right, can you help to teach me how to use it? (I
think it must be creating a VLAN manually before deploy hosted engine, then we should
choose the vlan when deploying?)
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:50
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: 答复: [ovirt-users] How to Use VLAN?
On 19/11/14 10:45, Xie, Chao wrote:
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
Hello Xie,
This is what leads me to believe that your DHCP server (which is in charge of allocating
IP addresses) only receives non-tagged traffic. Is it possible you need to configure other
ports to pass the VLAN-tagged traffic?
Lior.
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:09
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: [ovirt-users] How to Use VLAN?
On 19/11/14 05:01, Xie, Chao wrote:
> Hi,all
>
> Recently I test the VLAN and have some problems. I configure
> the Logical network “testvlan” with “VLAN tagged” and assigned it to
> hosts’ NIC. Then I create a VM using “testvlan” and found the vm
> can’t get IP . Does anyone have some ideas about VLAN?
>
> p.s. I already configure the switch port as TRUNK mode and
> the vlan id is 1 (default value).
>
Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to
allow traffic on this VLAN?
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:02 a.m.
New subject: 答复: 答复: How to Use VLAN?
Hi Xie,
Yes, that's exactly what it means, and you indeed need to create a VLAN
device manually and then choose it in the interactive script. CCing
Sandro to assist with how this is most easily done.
Yours, Lior.
On 21/11/14 03:34, Xie, Chao wrote:
Hi, Lior
Thanks for replying. Yesterday I tested VLAN successfully in the normal 3.5
environment. As the release Note, (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted
Engine 3.5 supports the new function of VLAN。 Is it meaning the "rhevm" logical
network use "VLAN" ? If I am right, can you help to teach me how to use it? (I
think it must be creating a VLAN manually before deploy hosted engine, then we should
choose the vlan when deploying?)
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:50
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: 答复: [ovirt-users] How to Use VLAN?
On 19/11/14 10:45, Xie, Chao wrote:
> Hi, Lior:
> I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
>
Hello Xie,
This is what leads me to believe that your DHCP server (which is in charge of allocating
IP addresses) only receives non-tagged traffic. Is it possible you need to configure other
ports to pass the VLAN-tagged traffic?
Lior.
> -----邮件原件-----
> 发件人: Lior Vernia [mailto:lvernia@redhat.com]
> 发送时间: 2014年11月19日 16:09
> 收件人: Xie, Chao/谢 超
> 抄送: users(a)ovirt.org
> 主题: Re: [ovirt-users] How to Use VLAN?
>
>
>
> On 19/11/14 05:01, Xie, Chao wrote:
>> Hi,all
>>
>> Recently I test the VLAN and have some problems. I configure
>> the Logical network “testvlan” with “VLAN tagged” and assigned it to
>> hosts’ NIC. Then I create a VM using “testvlan” and found the vm
>> can’t get IP . Does anyone have some ideas about VLAN?
>>
>> p.s. I already configure the switch port as TRUNK mode and
>> the vlan id is 1 (default value).
>>
>
> Which switch port? Maybe the port(s) leading to your DHCP server aren't
configured to allow traffic on this VLAN?
>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
8:02 p.m.
New subject: 答复: 答复: 答复: How to Use VLAN?
Dear Lior,Sandro
Lior, Thanks for replying~
Sandro, can u help to teach me the easiest way to do VLAN in Hosted Engine Environment?
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月23日 16:02
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org; Sandro Bonazzola
主题: Re: 答复: 答复: [ovirt-users] How to Use VLAN?
Hi Xie,
Yes, that's exactly what it means, and you indeed need to create a VLAN device
manually and then choose it in the interactive script. CCing Sandro to assist with how
this is most easily done.
Yours, Lior.
On 21/11/14 03:34, Xie, Chao wrote:
Hi, Lior
Thanks for replying. Yesterday I tested VLAN successfully in the
normal 3.5 environment. As the release Note,
(http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted Engine 3.5
supports the new function of VLAN。 Is it meaning the "rhevm" logical
network use "VLAN" ? If I am right, can you help to teach me how to
use it? (I think it must be creating a VLAN manually before deploy
hosted engine, then we should choose the vlan when deploying?)
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月19日 16:50
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org
主题: Re: 答复: [ovirt-users] How to Use VLAN?
On 19/11/14 10:45, Xie, Chao wrote:
> Hi, Lior:
> I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
>
Hello Xie,
This is what leads me to believe that your DHCP server (which is in charge of allocating
IP addresses) only receives non-tagged traffic. Is it possible you need to configure other
ports to pass the VLAN-tagged traffic?
Lior.
> -----邮件原件-----
> 发件人: Lior Vernia [mailto:lvernia@redhat.com]
> 发送时间: 2014年11月19日 16:09
> 收件人: Xie, Chao/谢 超
> 抄送: users(a)ovirt.org
> 主题: Re: [ovirt-users] How to Use VLAN?
>
>
>
> On 19/11/14 05:01, Xie, Chao wrote:
>> Hi,all
>>
>> Recently I test the VLAN and have some problems. I
>> configure the Logical network “testvlan” with “VLAN tagged” and
>> assigned it to hosts’ NIC. Then I create a VM using “testvlan” and
>> found the vm can’t get IP . Does anyone have some ideas about VLAN?
>>
>> p.s. I already configure the switch port as TRUNK mode and
>> the vlan id is 1 (default value).
>>
>
> Which switch port? Maybe the port(s) leading to your DHCP server aren't
configured to allow traffic on this VLAN?
>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
9:44 a.m.
New subject: 答复: 答复: 答复: How to Use VLAN?
Il 24/11/2014 03:02, Xie, Chao ha scritto:
Dear Lior,Sandro
Lior, Thanks for replying~
Sandro, can u help to teach me the easiest way to do VLAN in Hosted Engine Environment?
Hi,
well, if you just need to create a tagged vlan interface to be used by hosted engine, you
can follow fedora guide for creating the tagged vlan nic:
http://docs.fedoraproject.org/en-US/Fedora/17/html/System_Administrators_...
Once the device is created you just need to select it when executing hosted-engine
--deploy.
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia@redhat.com]
发送时间: 2014年11月23日 16:02
收件人: Xie, Chao/谢 超
抄送: users(a)ovirt.org; Sandro Bonazzola
主题: Re: 答复: 答复: [ovirt-users] How to Use VLAN?
Hi Xie,
Yes, that's exactly what it means, and you indeed need to create a VLAN device
manually and then choose it in the interactive script. CCing Sandro to assist with how
this is most easily done.
Yours, Lior.
On 21/11/14 03:34, Xie, Chao wrote:
> Hi, Lior
> Thanks for replying. Yesterday I tested VLAN successfully in the
> normal 3.5 environment. As the release Note,
> (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted Engine 3.5
> supports the new function of VLAN。 Is it meaning the "rhevm" logical
> network use "VLAN" ? If I am right, can you help to teach me how to
> use it? (I think it must be creating a VLAN manually before deploy
> hosted engine, then we should choose the vlan when deploying?)
>
> -----邮件原件-----
> 发件人: Lior Vernia [mailto:lvernia@redhat.com]
> 发送时间: 2014年11月19日 16:50
> 收件人: Xie, Chao/谢 超
> 抄送: users(a)ovirt.org
> 主题: Re: 答复: [ovirt-users] How to Use VLAN?
>
>
>
> On 19/11/14 10:45, Xie, Chao wrote:
>> Hi, Lior:
>> I configure the switch port connecting the host's NIC which hold the
"testvlan" logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM using it
didn't get IP.
>>
>
> Hello Xie,
>
> This is what leads me to believe that your DHCP server (which is in charge of
allocating IP addresses) only receives non-tagged traffic. Is it possible you need to
configure other ports to pass the VLAN-tagged traffic?
>
> Lior.
>
>> -----邮件原件-----
>> 发件人: Lior Vernia [mailto:lvernia@redhat.com]
>> 发送时间: 2014年11月19日 16:09
>> 收件人: Xie, Chao/谢 超
>> 抄送: users(a)ovirt.org
>> 主题: Re: [ovirt-users] How to Use VLAN?
>>
>>
>>
>> On 19/11/14 05:01, Xie, Chao wrote:
>>> Hi,all
>>>
>>> Recently I test the VLAN and have some problems. I
>>> configure the Logical network “testvlan” with “VLAN tagged” and
>>> assigned it to hosts’ NIC. Then I create a VM using “testvlan” and
>>> found the vm can’t get IP . Does anyone have some ideas about VLAN?
>>>
>>> p.s. I already configure the switch port as TRUNK mode and
>>> the vlan id is 1 (default value).
>>>
>>
>> Which switch port? Maybe the port(s) leading to your DHCP server aren't
configured to allow traffic on this VLAN?
>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
3433
days inactive
3439
days old
8 comments
3 participants
participants (3)
-
Lior Vernia -
Sandro Bonazzola -
Xie, Chao