Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 02:23 PM, Rickard Kristiansson wrote:
Hmm.. yes, I do have the storage network configured in DC and Cluster, and also attached to all my hypervisors. The question is just how I also attach it to the Engine server, as this isn't visible as a node in the GUI?
i think this could be done with puppet, afaik some work for integrating it to oVirt been done lately, though not sure if it's already available, oved?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org, "\"René \"Koch (ovido)\"\"" <r.koch@ovido.at> *Skickat: *måndag, 23 sep 2013 13:20:06 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 01:50 PM, Rickard Kristiansson wrote:
Thanks Michael,
I'm still trying to get my head around this, but I can't see how I configure the networks on the engine? For nodes and AOI it's OK, but in my case I am running the engine as a separate server which is not a node and does not show up as a Host in the GUI. Or do I need to add the engine as a host in the GUI as well, to be able to configure it?
IIUC your question, you have various options:
1. GUI 2. SDKs 3. CLI
you need to create network in DC, attach it to cluster, attach to host NIC/s (if you want it to be atomic operation, i.e you expect connectivity loss during the operation/s, setupnetworks should be used, otherwise you can use attach-network dialogues in UI)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org *Skickat: *måndag, 23 sep 2013 12:21:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 12:54 PM, Rickard Kristiansson wrote:
Hi,
I want to use two network interfaces connected to different networks in Engine (3.3), where one is for ovirtmgmt and one is for a separate storage network. It works fine for a minute or so after rebooting Engine, but then the configuration is changed by Engine, connecting both interfaces to bond0 and losing connectivity (as obviously you can't bond those two interfaces when they are connected to separate physical networks..). What is the mechanism doing this,
please see this [1].
[1] http://www.ovirt.org/Features/Design/Network/SetupNetworks
and it is possible to disable this automatic network bonding on the engine so that we can use separate networks on the network interfaces..?
attaching logs would help, but i guess it happen cause you did not saved your host network config, i.e when host got rebooted, it performs roll-back to old config, this is actually disaster recovery mechanism.
Rickard
**
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
-- Michael Pasternak RedHat, ENG-Virtualization R&D
------=_Part_186583_54263086.1379936476704 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable OK. Maybe I'm asking for something irrelevant, but to answer Ren=C3=A9's qu= estion; The use case is that there are two separate physical networks for g= eneral IP and storage IP, and Engine seems to require to be able to reach t= he NFS server to validate the connection when configuring mapping. So to be= able to configure a NFS server, the Engine needs to be connected also to t= he storage network.=20 It worked fine after manually tweaking the sysconfig/network-scripts, but t= his config was then shortly overridden by Engine discovering and trying to = use the second NIC for bonding with ovirtmgmt.=20 ----- Ursprungligt meddelande ----- Fr=C3=A5n: "Michael Pasternak" <mpastern@redhat.com>=20 Till: "Rickard Kristiansson" <rickard@sanuksystems.com>, users@ovirt.org, "= Oved Ourfalli" <ovedo@redhat.com>=20 Kopia: "Ohad Levy" <olevy@redhat.com>=20 Skickat: m=C3=A5ndag, 23 sep 2013 13:35:40=20 =C3=84mne: Re: [Users] Multiple network interfaces on engine?=20 On 09/23/2013 02:23 PM, Rickard Kristiansson wrote:=20 > Hmm.. yes, I do have the storage network configured in DC and Cluster, an= d also attached to all my hypervisors.=20 > The question is just how I also attach it to the Engine server, as this i= sn't visible as a node in the GUI?=20 i think this could be done with puppet, afaik some work for integrating it = to=20 oVirt been done lately, though not sure if it's already available,=20 oved?=20 >=20 >=20 > -------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------=20 > *Fr=C3=A5n: *"Michael Pasternak" <mpastern@redhat.com>=20 > *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com>=20 > *Kopia: *users@ovirt.org, "\"Ren=C3=A9 \"Koch (ovido)\"\"" <r.koch@ovido.= at>=20 > *Skickat: *m=C3=A5ndag, 23 sep 2013 13:20:06=20 > *=C3=84mne: *Re: [Users] Multiple network interfaces on engine?=20 >=20 > On 09/23/2013 01:50 PM, Rickard Kristiansson wrote:=20 >> Thanks Michael,=20 >>=20 >> I'm still trying to get my head around this, but I can't see how I confi= gure the networks on the engine?=20 >> For nodes and AOI it's OK, but in my case I am running the engine as a s= eparate server which is not a node and does not show up as a Host in the GU= I.=20 >> Or do I need to add the engine as a host in the GUI as well, to be able = to configure it?=20 >=20 > IIUC your question, you have various options:=20 >=20 > 1. GUI=20 > 2. SDKs=20 > 3. CLI=20 >=20 > you need to create network in DC, attach it to cluster, attach to host NI= C/s (if you want it to be=20 > atomic operation, i.e you expect connectivity loss during the operation/s= , setupnetworks should be used,=20 > otherwise you can use attach-network dialogues in UI)=20 >=20 >>=20 >>=20 >> ------------------------------------------------------------------------= ---------------------------------------------------------------------------= -------------------------=20 >> *Fr=C3=A5n: *"Michael Pasternak" <mpastern@redhat.com>=20 >> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com>=20 >> *Kopia: *users@ovirt.org=20 >> *Skickat: *m=C3=A5ndag, 23 sep 2013 12:21:40=20 >> *=C3=84mne: *Re: [Users] Multiple network interfaces on engine?=20 >>=20 >> On 09/23/2013 12:54 PM, Rickard Kristiansson wrote:=20 >>> Hi,=20 >>>=20 >>> I want to use two network interfaces connected to different networks in= Engine (3.3), where one is for ovirtmgmt and one is for a separate storage= network.=20 >>> It works fine for a minute or so after rebooting Engine, but then the c= onfiguration is changed by Engine, connecting both interfaces to bond0 and = losing connectivity (as=20 >>> obviously you can't bond those two interfaces when they are connected t= o separate physical networks..).=20 >>> What is the mechanism doing this,=20 >>=20 >> please see this [1].=20 >>=20 >> [1] http://www.ovirt.org/Features/Design/Network/SetupNetworks=20 >>=20 >>> and it is possible to disable this automatic network bonding on the eng= ine so that we can use separate networks on the network interfaces..?=20 >>=20 >> attaching logs would help, but i guess it happen cause you did not saved= =20 >> your host network config, i.e when host got rebooted, it performs roll-b= ack=20 >> to old config, this is actually disaster recovery mechanism.=20 >>=20 >>>=20 >>> Rickard=20 >>>=20 >>> **=20 >>>=20 >>>=20 >>> _______________________________________________=20 >>> Users mailing list=20 >>> Users@ovirt.org=20 >>> http://lists.ovirt.org/mailman/listinfo/users=20 >>>=20 >>=20 >>=20 >> --=20 >>=20 >> Michael Pasternak=20 >> RedHat, ENG-Virtualization R&D=20 >>=20 >=20 >=20 > --=20 >=20 > Michael Pasternak=20 > RedHat, ENG-Virtualization R&D=20 >=20 --=20 Michael Pasternak=20 RedHat, ENG-Virtualization R&D=20 ------=_Part_186583_54263086.1379936476704 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial, Helvetica, sans-serif; font-s= ize: 12pt; color: #000000"><div>OK. Maybe I'm asking for something irreleva= nt, but to answer Ren=C3=A9's question; The use case is that there are two = separate physical networks for general IP and storage IP, and Engine seems = to require to be able to reach the NFS server to validate the connection wh= en configuring mapping. So to be able to configure a NFS server, the Engine= needs to be connected also to the storage network.<br></div><div>It worked= fine after manually tweaking the sysconfig/network-scripts, but this confi= g was then shortly overridden by Engine discovering and trying to use the s= econd NIC for bonding with ovirtmgmt. <br></div><div><br></div><hr id=3D"zw= chr"><div style=3D"color:#000;font-weight:normal;font-style:normal;text-dec= oration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;" data-m= ce-style=3D"color: #000; font-weight: normal; font-style: normal; text-deco= ration: none; font-family: Helvetica,Arial,sans-serif; font-size: 12pt;"><b= >Fr=C3=A5n: </b>"Michael Pasternak" <mpastern@redhat.com><br><b>Till:= </b>"Rickard Kristiansson" <rickard@sanuksystems.com>, users@ovirt.o= rg, "Oved Ourfalli" <ovedo@redhat.com><br><b>Kopia: </b>"Ohad Levy" &= lt;olevy@redhat.com><br><b>Skickat: </b>m=C3=A5ndag, 23 sep 2013 13:35:4= 0<br><b>=C3=84mne: </b>Re: [Users] Multiple network interfaces on engine?<b= r><div><br></div>On 09/23/2013 02:23 PM, Rickard Kristiansson wrote:<br>>= ; Hmm.. yes, I do have the storage network configured in DC and Cluster, an= d also attached to all my hypervisors.<br>> The question is just how I a= lso attach it to the Engine server, as this isn't visible as a node in the = GUI?<br><div><br></div>i think this could be done with puppet, afaik some w= ork for integrating it to<br>oVirt been done lately, though not sure if it'= s already available,<br><div><br></div>oved?<br><div><br></div>> <br>>= ; <br>> ----------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------<br>> *Fr=C3=A5n: *"Michael Pasternak" = <mpastern@redhat.com><br>> *Till: *"Rickard Kristiansson" <rick= ard@sanuksystems.com><br>> *Kopia: *users@ovirt.org, "\"Ren=C3=A9 \"K= och (ovido)\"\"" <r.koch@ovido.at><br>> *Skickat: *m=C3=A5ndag, 23= sep 2013 13:20:06<br>> *=C3=84mne: *Re: [Users] Multiple network interf= aces on engine?<br>> <br>> On 09/23/2013 01:50 PM, Rickard Kristianss= on wrote:<br>>> Thanks Michael,<br>>><br>>> I'm still try= ing to get my head around this, but I can't see how I configure the network= s on the engine?<br>>> For nodes and AOI it's OK, but in my case I am= running the engine as a separate server which is not a node and does not s= how up as a Host in the GUI.<br>>> Or do I need to add the engine as = a host in the GUI as well, to be able to configure it?<br>> <br>> IIU= C your question, you have various options:<br>> <br>> 1. GUI<br>> = 2. SDKs<br>> 3. CLI<br>> <br>> you need to create network in DC, a= ttach it to cluster, attach to host NIC/s (if you want it to be<br>> ato= mic operation, i.e you expect connectivity loss during the operation/s, set= upnetworks should be used,<br>> otherwise you can use attach-network dia= logues in UI)<br>> <br>>><br>>><br>>> ----------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------<br>>> *Fr=C3=A5n: *"Michael Pasternak" <mpastern@redhat.com= ><br>>> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.co= m><br>>> *Kopia: *users@ovirt.org<br>>> *Skickat: *m=C3=A5nd= ag, 23 sep 2013 12:21:40<br>>> *=C3=84mne: *Re: [Users] Multiple netw= ork interfaces on engine?<br>>><br>>> On 09/23/2013 12:54 PM, R= ickard Kristiansson wrote:<br>>>> Hi,<br>>>><br>>>&= gt; I want to use two network interfaces connected to different networks in= Engine (3.3), where one is for ovirtmgmt and one is for a separate storage= network.<br>>>> It works fine for a minute or so after rebooting = Engine, but then the configuration is changed by Engine, connecting both in= terfaces to bond0 and losing connectivity (as<br>>>> obviously you= can't bond those two interfaces when they are connected to separate physic= al networks..).<br>>>> What is the mechanism doing this,<br>>&g= t;<br>>> please see this [1].<br>>><br>>> [1] http://www.= ovirt.org/Features/Design/Network/SetupNetworks<br>>><br>>>>= and it is possible to disable this automatic network bonding on the engine= so that we can use separate networks on the network interfaces..?<br>>&= gt;<br>>> attaching logs would help, but i guess it happen cause you = did not saved<br>>> your host network config, i.e when host got reboo= ted, it performs roll-back<br>>> to old config, this is actually disa= ster recovery mechanism.<br>>><br>>>><br>>>> Rickar= d<br>>>><br>>>> **<br>>>><br>>>><br>>= ;>> _______________________________________________<br>>>> U= sers mailing list<br>>>> Users@ovirt.org<br>>>> http://li= sts.ovirt.org/mailman/listinfo/users<br>>>><br>>><br>>>= ;<br>>> --<br>>><br>>> Michael Pasternak<br>>> RedH= at, ENG-Virtualization R&D<br>>><br>> <br>> <br>> -- <br= >> <br>> Michael Pasternak<br>> RedHat, ENG-Virtualization R&D= <br>> <br><div><br></div><br>-- <br><div><br></div>Michael Pasternak<br>= RedHat, ENG-Virtualization R&D<br></div><div><br></div></div></body></h= tml> ------=_Part_186583_54263086.1379936476704--
----- Original Message -----
From: "Michael Pasternak" <mpastern@redhat.com> To: "Rickard Kristiansson" <rickard@sanuksystems.com>, users@ovirt.org, "Oved Ourfalli" <ovedo@redhat.com> Cc: "Ohad Levy" <olevy@redhat.com> Sent: Monday, September 23, 2013 2:35:40 PM Subject: Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 02:23 PM, Rickard Kristiansson wrote:
Hmm.. yes, I do have the storage network configured in DC and Cluster, and also attached to all my hypervisors. The question is just how I also attach it to the Engine server, as this isn't visible as a node in the GUI?
i think this could be done with puppet, afaik some work for integrating it to oVirt been done lately, though not sure if it's already available,
oved?
Not sure I understand the use-case, but currently the integration doesn't allow provisioning of any kind on hosts. Oved
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org, "\"René \"Koch (ovido)\"\"" <r.koch@ovido.at> *Skickat: *måndag, 23 sep 2013 13:20:06 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 01:50 PM, Rickard Kristiansson wrote:
Thanks Michael,
I'm still trying to get my head around this, but I can't see how I configure the networks on the engine? For nodes and AOI it's OK, but in my case I am running the engine as a separate server which is not a node and does not show up as a Host in the GUI. Or do I need to add the engine as a host in the GUI as well, to be able to configure it?
IIUC your question, you have various options:
1. GUI 2. SDKs 3. CLI
you need to create network in DC, attach it to cluster, attach to host NIC/s (if you want it to be atomic operation, i.e you expect connectivity loss during the operation/s, setupnetworks should be used, otherwise you can use attach-network dialogues in UI)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org *Skickat: *måndag, 23 sep 2013 12:21:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 12:54 PM, Rickard Kristiansson wrote:
Hi,
I want to use two network interfaces connected to different networks in Engine (3.3), where one is for ovirtmgmt and one is for a separate storage network. It works fine for a minute or so after rebooting Engine, but then the configuration is changed by Engine, connecting both interfaces to bond0 and losing connectivity (as obviously you can't bond those two interfaces when they are connected to separate physical networks..). What is the mechanism doing this,
please see this [1].
[1] http://www.ovirt.org/Features/Design/Network/SetupNetworks
and it is possible to disable this automatic network bonding on the engine so that we can use separate networks on the network interfaces..?
attaching logs would help, but i guess it happen cause you did not saved your host network config, i.e when host got rebooted, it performs roll-back to old config, this is actually disaster recovery mechanism.
Rickard
**
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On 09/23/2013 02:41 PM, Rickard Kristiansson wrote:
OK. Maybe I'm asking for something irrelevant, but to answer René's question; The use case is that there are two separate physical networks for general IP and storage IP, and Engine seems to require to be able to reach the NFS server to validate the connection when configuring mapping. So to be able to configure a NFS server, the Engine needs to be connected also to the storage network.
engine does not need to be connected to storage network. it does all storage access via the hosts.
It worked fine after manually tweaking the sysconfig/network-scripts, but this config was then shortly overridden by Engine discovering and trying to use the second NIC for bonding with ovirtmgmt.
the engine isn't trying to bond by itself. have you bonded the interfaces on the host setup-network dialog?
------------------------------------------------------------------------ *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com>, users@ovirt.org, "Oved Ourfalli" <ovedo@redhat.com> *Kopia: *"Ohad Levy" <olevy@redhat.com> *Skickat: *måndag, 23 sep 2013 13:35:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
Hmm.. yes, I do have the storage network configured in DC and Cluster, and also attached to all my hypervisors. The question is just how I also attach it to the Engine server, as
On 09/23/2013 02:23 PM, Rickard Kristiansson wrote: this isn't visible as a node in the GUI?
i think this could be done with puppet, afaik some work for integrating it to oVirt been done lately, though not sure if it's already available,
oved?
*Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org, "\"René \"Koch (ovido)\"\"" <r.koch@ovido.at> *Skickat: *måndag, 23 sep 2013 13:20:06 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 01:50 PM, Rickard Kristiansson wrote:
Thanks Michael,
I'm still trying to get my head around this, but I can't see how I configure the networks on the engine? For nodes and AOI it's OK, but in my case I am running the engine as a separate server which is not a node and does not show up as a Host in
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- the GUI.
Or do I need to add the engine as a host in the GUI as well, to be able to configure it?
IIUC your question, you have various options:
1. GUI 2. SDKs 3. CLI
you need to create network in DC, attach it to cluster, attach to host NIC/s (if you want it to be atomic operation, i.e you expect connectivity loss during the operation/s, setupnetworks should be used, otherwise you can use attach-network dialogues in UI)
*Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org *Skickat: *måndag, 23 sep 2013 12:21:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
Hi,
I want to use two network interfaces connected to different networks in Engine (3.3), where one is for ovirtmgmt and one is for a separate storage network. It works fine for a minute or so after rebooting Engine, but then
On 09/23/2013 12:54 PM, Rickard Kristiansson wrote: the configuration is changed by Engine, connecting both interfaces to bond0 and losing connectivity (as
obviously you can't bond those two interfaces when they are connected to separate physical networks..). What is the mechanism doing this,
please see this [1].
[1] http://www.ovirt.org/Features/Design/Network/SetupNetworks
and it is possible to disable this automatic network bonding on the engine so that we can use separate networks on the network interfaces..?
attaching logs would help, but i guess it happen cause you did not saved your host network config, i.e when host got rebooted, it performs roll-back to old config, this is actually disaster recovery mechanism.
Rickard
**
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
OK. Maybe I'm asking for something irrelevant, but to answer René's question; The use case is that there are two separate physical networks for general IP and storage IP, and Engine seems to require to be able to reach the NFS server to validate the connection when configuring mapping. So to be able to configure a NFS server, the Engine needs to be connected also to the storage network. It worked fine after manually tweaking the sysconfig/network-scripts, but this config was then shortly overridden by Engine discovering and trying to use the second NIC for bonding with ovirtmgmt. I have also more than one interface in my Engine but never had this
This is a multi-part message in MIME format. --------------010701040300070806060900 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Rickard Kristiansson wrote: problem, I don't have a ovirtmgmt network on my Engine hosts thats not needed. I can understand the need for the engine server to have a nic/ip in the managment network AND a nic/ip in the storage network. I also have a separate access/public network and ilo network. It looks like you have a bond defined somewhere and it looks like you have vdsm running on your engine server. Just looking at my two engine servers and none has more than one ip. The one in the test setup doesn't even have storage assigned and doesn't need it. It sends mount commands to the hosts which DO have a separate storage network. My engine hosts don't host the iso/export domains so don't need to be in the storage network. If you have the possibility, go back to a bare machine with NetworkManager turned off and network turned on. Make sure networking is working as expected, eth0=ip in managment, eth1= ip in storage. Install/setup ovirt-engine-setup, don't install vdsm (gets installed if you do allinone!) and things should 'just' work. Regards, Joop --------------010701040300070806060900 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=UTF-8" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> Rickard Kristiansson wrote: <blockquote cite="mid:1466620074.186584.1379936476705.JavaMail.root@sanuksystems.com" type="cite"> <div style="font-family: Arial,Helvetica,sans-serif; font-size: 12pt; color: rgb(0, 0, 0);"> <div>OK. Maybe I'm asking for something irrelevant, but to answer René's question; The use case is that there are two separate physical networks for general IP and storage IP, and Engine seems to require to be able to reach the NFS server to validate the connection when configuring mapping. So to be able to configure a NFS server, the Engine needs to be connected also to the storage network.<br> </div> <div>It worked fine after manually tweaking the sysconfig/network-scripts, but this config was then shortly overridden by Engine discovering and trying to use the second NIC for bonding with ovirtmgmt. <br> </div> </div> </blockquote> I have also more than one interface in my Engine but never had this problem, I don't have a ovirtmgmt network on my Engine hosts thats not needed. I can understand the need for the engine server to have a nic/ip in the managment network AND a nic/ip in the storage network. I also have a separate access/public network and ilo network.<br> It looks like you have a bond defined somewhere and it looks like you have vdsm running on your engine server.<br> <br> Just looking at my two engine servers and none has more than one ip. The one in the test setup doesn't even have storage assigned and doesn't need it. It sends mount commands to the hosts which DO have a separate storage network. My engine hosts don't host the iso/export domains so don't need to be in the storage network.<br> <br> If you have the possibility, go back to a bare machine with NetworkManager turned off and network turned on. Make sure networking is working as expected, eth0=ip in managment, eth1= ip in storage. Install/setup ovirt-engine-setup, don't install vdsm (gets installed if you do allinone!) and things should 'just' work.<br> <br> Regards,<br> <br> Joop<br> <br> </body> </html> --------------010701040300070806060900--
is it possible that you have all-in-one installed and have both the engine and host on a same machine? On 09/23/2013 04:05 PM, Itamar Heim wrote:
On 09/23/2013 02:41 PM, Rickard Kristiansson wrote:
OK. Maybe I'm asking for something irrelevant, but to answer René's question; The use case is that there are two separate physical networks for general IP and storage IP, and Engine seems to require to be able to reach the NFS server to validate the connection when configuring mapping. So to be able to configure a NFS server, the Engine needs to be connected also to the storage network.
engine does not need to be connected to storage network. it does all storage access via the hosts.
It worked fine after manually tweaking the sysconfig/network-scripts, but this config was then shortly overridden by Engine discovering and trying to use the second NIC for bonding with ovirtmgmt.
the engine isn't trying to bond by itself. have you bonded the interfaces on the host setup-network dialog?
------------------------------------------------------------------------ *Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com>, users@ovirt.org, "Oved Ourfalli" <ovedo@redhat.com> *Kopia: *"Ohad Levy" <olevy@redhat.com> *Skickat: *måndag, 23 sep 2013 13:35:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
Hmm.. yes, I do have the storage network configured in DC and Cluster, and also attached to all my hypervisors. The question is just how I also attach it to the Engine server, as
On 09/23/2013 02:23 PM, Rickard Kristiansson wrote: this isn't visible as a node in the GUI?
i think this could be done with puppet, afaik some work for integrating it to oVirt been done lately, though not sure if it's already available,
oved?
*Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org, "\"René \"Koch (ovido)\"\"" <r.koch@ovido.at> *Skickat: *måndag, 23 sep 2013 13:20:06 *Ämne: *Re: [Users] Multiple network interfaces on engine?
On 09/23/2013 01:50 PM, Rickard Kristiansson wrote:
Thanks Michael,
I'm still trying to get my head around this, but I can't see how I configure the networks on the engine? For nodes and AOI it's OK, but in my case I am running the engine as a separate server which is not a node and does not show up as a Host in
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- the GUI.
Or do I need to add the engine as a host in the GUI as well, to be able to configure it?
IIUC your question, you have various options:
1. GUI 2. SDKs 3. CLI
you need to create network in DC, attach it to cluster, attach to host NIC/s (if you want it to be atomic operation, i.e you expect connectivity loss during the operation/s, setupnetworks should be used, otherwise you can use attach-network dialogues in UI)
*Från: *"Michael Pasternak" <mpastern@redhat.com> *Till: *"Rickard Kristiansson" <rickard@sanuksystems.com> *Kopia: *users@ovirt.org *Skickat: *måndag, 23 sep 2013 12:21:40 *Ämne: *Re: [Users] Multiple network interfaces on engine?
Hi,
I want to use two network interfaces connected to different networks in Engine (3.3), where one is for ovirtmgmt and one is for a separate storage network. It works fine for a minute or so after rebooting Engine, but then
On 09/23/2013 12:54 PM, Rickard Kristiansson wrote: the configuration is changed by Engine, connecting both interfaces to bond0 and losing connectivity (as
obviously you can't bond those two interfaces when they are connected to separate physical networks..). What is the mechanism doing this,
please see this [1].
[1] http://www.ovirt.org/Features/Design/Network/SetupNetworks
and it is possible to disable this automatic network bonding on the engine so that we can use separate networks on the network interfaces..?
attaching logs would help, but i guess it happen cause you did not saved your host network config, i.e when host got rebooted, it performs roll-back to old config, this is actually disaster recovery mechanism.
Rickard
**
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
--
Michael Pasternak RedHat, ENG-Virtualization R&D
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Pasternak RedHat, ENG-Virtualization R&D
------=_Part_188135_532733164.1379944506657 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit OK, thanks. Then I'm happy with the explanations that it is supposed to work the way I initially expected.. That all operations are actually carried out on the nodes is good news, and should solve all worries. I'll go back and see what is actually going wrong on the engine and try to fix it. I'd love to reinstall the engine, but as I can't find any documentation on how to reliably move configs from one engine to another, and I was brave enough to already put ovirt into production with a number of hypervisors, I'm somewhat limited to what I can/dare to do. ----- Ursprungligt meddelande ----- I have also more than one interface in my Engine but never had this problem, I don't have a ovirtmgmt network on my Engine hosts thats not needed. I can understand the need for the engine server to have a nic/ip in the managment network AND a nic/ip in the storage network. I also have a separate access/public network and ilo network. It looks like you have a bond defined somewhere and it looks like you have vdsm running on your engine server. Just looking at my two engine servers and none has more than one ip. The one in the test setup doesn't even have storage assigned and doesn't need it. It sends mount commands to the hosts which DO have a separate storage network. My engine hosts don't host the iso/export domains so don't need to be in the storage network. If you have the possibility, go back to a bare machine with NetworkManager turned off and network turned on. Make sure networking is working as expected, eth0=ip in managment, eth1= ip in storage. Install/setup ovirt-engine-setup, don't install vdsm (gets installed if you do allinone!) and things should 'just' work. Regards, Joop _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ------=_Part_188135_532733164.1379944506657 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial, Helvetica, sans-serif; font-s= ize: 12pt; color: #000000"><div>OK, thanks. Then I'm happy with the explana= tions that it is supposed to work the way I initially expected..<br></div><= div>That all operations are actually carried out on the nodes is good news,= and should solve all worries.<br></div><div><br></div><div>I'll go back an= d see what is actually going wrong on the engine and try to fix it.<br></di= v><div>I'd love to reinstall the engine, but as I can't find any documentat= ion on how to reliably move configs from one engine to another, and I was b= rave enough to already put ovirt into production with a number of hyperviso= rs, I'm somewhat limited to what I can/dare to do.<br></div><div><br></div>= <div><br></div><hr id=3D"zwchr"><div data-mce-style=3D"color: #000; font-we= ight: normal; font-style: normal; text-decoration: none; font-family: Helve= tica,Arial,sans-serif; font-size: 12pt;"><br></div><div data-mce-style=3D"c= olor: #000; font-weight: normal; font-style: normal; text-decoration: none;= font-family: Helvetica,Arial,sans-serif; font-size: 12pt;"><br></div><div = data-mce-style=3D"color: #000; font-weight: normal; font-style: normal; tex= t-decoration: none; font-family: Helvetica,Arial,sans-serif; font-size: 12p= t;">I have also more than one interface in my Engine but never had this pro= blem, I don't have a ovirtmgmt network on my Engine hosts thats not needed.= I can understand the need for the engine server to have a nic/ip in the ma= nagment network AND a nic/ip in the storage network. I also have a separate= access/public network and ilo network.<br> It looks like you have a bond d= efined somewhere and it looks like you have vdsm running on your engine ser= ver.<br> <br> Just looking at my two engine servers and none has more than = one ip. The one in the test setup doesn't even have storage assigned and do= esn't need it. It sends mount commands to the hosts which DO have a separat= e storage network. My engine hosts don't host the iso/export domains so don= 't need to be in the storage network.<br> <br> If you have the possibility,= go back to a bare machine with NetworkManager turned off and network turne= d on. Make sure networking is working as expected, eth0=3Dip in managment, = eth1=3D ip in storage. Install/setup ovirt-engine-setup, don't install vdsm= (gets installed if you do allinone!) and things should 'just' work.<br> <b= r> Regards,<br> <br> Joop<br> <br><div><br></div>__________________________= _____________________<br>Users mailing list<br>Users@ovirt.org<br>http://li= sts.ovirt.org/mailman/listinfo/users<br></div><div><br></div></div></body><= /html> ------=_Part_188135_532733164.1379944506657--
participants (5)
-
Itamar Heim -
Joop -
Michael Pasternak -
Oved Ourfalli -
Rickard Kristiansson