1:30 p.m.
Hello,
I'm performing a self hosted engine installation for the first time.
The system now has only one host.
Host machine and engine VM run Centos 7 .
The host uses LVM
After ovirt installation on host console I see this error every 5 minutes:
[ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
[ 1823.837228] device-mapper: ioctl: error adding target to table
On /dev there are't devices that match 253:4
Seems that multipath try to add /dev/dm-4 but this isn't in /dev (and dm-* is
blacklisted in multipath.conf default)
Other thing is related to the engine.
On oVirt web interface I can see the VM for engine running. I don't see IP address and
FQDN in the list.
If I try to change something in VM configuration I get the message:
"Cannot edit VM. This VM is not managed by the engine."
Is this correct??
Bye
1:44 p.m.
----- Original Message -----
From: "Stefano Danzi" <s.danzi(a)hawai.it>
To: users(a)ovirt.org
Sent: Thursday, February 5, 2015 12:30:46 PM
Subject: [ovirt-users] Self hosted engine iusses
Hello,
I'm performing a self hosted engine installation for the first time.
The system now has only one host.
Host machine and engine VM run Centos 7 .
The host uses LVM
After ovirt installation on host console I see this error every 5 minutes:
[ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
[ 1823.837228] device-mapper: ioctl: error adding target to table
On /dev there are't devices that match 253:4
Seems that multipath try to add /dev/dm-4 but this isn't in /dev (and dm-* is
blacklisted in multipath.conf default)
No idea, adding Nir.
Other thing is related to the engine.
On oVirt web interface I can see the VM for engine running. I don't see IP
address and FQDN in the list.
If I try to change something in VM configuration I get the message:
"Cannot edit VM. This VM is not managed by the engine."
Is this correct??
Yes. Will probably be possible in 3.6.
For now you can manually edit vm.conf, see e.g.:
http://lists.ovirt.org/pipermail/users/2014-March/022511.html
--
Didi
1:52 p.m.
----- Original Message -----
From: "Stefano Danzi" <s.danzi(a)hawai.it>
To: users(a)ovirt.org
Sent: Thursday, February 5, 2015 12:30:46 PM
Subject: [ovirt-users] Self hosted engine iusses
Hello,
I'm performing a self hosted engine installation for the first time.
The system now has only one host.
Host machine and engine VM run Centos 7 .
The host uses LVM
After ovirt installation on host console I see this error every 5 minutes:
[ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
[ 1823.837228] device-mapper: ioctl: error adding target to table
This may be caused by the fact that vdsm does not cleanup properly after
deactivating storage domains. We have an open bugs on this.
You may have an active lv using non-existent multipath device.
Can you share with us the output of:
lsblk
multipath -ll
dmsetup table
cat /etc/multipath.conf
pvscan --cache > /dev/null && lvs
Nir
1:58 p.m.
Il 05/02/2015 11.52, Nir Soffer ha scritto:
----- Original Message -----
After ovirt installation on host console I see this error every 5 minutes:
[ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
[ 1823.837228] device-mapper: ioctl: error adding target to table
This may be caused by the fact that vdsm does not cleanup properly after
deactivating storage domains. We have an open bugs on this.
You may have an active lv using non-existent multipath device.
Can you share with us the output of:
lsblk
multipath -ll
dmsetup table
cat /etc/multipath.conf
pvscan --cache > /dev/null && lvs
Nir
See above:
[root@ovirt01 etc]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 500M 0 part
│ └─md0 9:0 0 500M 0 raid1 /boot
└─sda2 8:2 0 931G 0 part
└─md1 9:1 0 930,9G 0 raid1
├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
├─centos_ovirt01-root 253:1 0 50G 0 lvm /
├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
└─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
/home/glusterfs/engine
sdb 8:16 0 931,5G 0 disk
├─sdb1 8:17 0 500M 0 part
│ └─md0 9:0 0 500M 0 raid1 /boot
└─sdb2 8:18 0 931G 0 part
└─md1 9:1 0 930,9G 0 raid1
├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
├─centos_ovirt01-root 253:1 0 50G 0 lvm /
├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
└─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
/home/glusterfs/engine
[root@ovirt01 etc]# multipath -ll
Feb 05 11:56:25 | multipath.conf +5, invalid keyword: getuid_callout
Feb 05 11:56:25 | multipath.conf +18, invalid keyword: getuid_callout
Feb 05 11:56:25 | multipath.conf +37, invalid keyword: getuid_callout
[root@ovirt01 etc]# dmsetup table
centos_ovirt01-home: 0 20971520 linear 9:1 121391104
centos_ovirt01-swap: 0 16531456 linear 9:1 2048
centos_ovirt01-root: 0 104857600 linear 9:1 16533504
centos_ovirt01-glusterOVEngine: 0 104857600 linear 9:1 142362624
[root@ovirt01 etc]# cat /etc/multipath.conf
# RHEV REVISION 1.1
defaults {
polling_interval 5
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
no_path_retry fail
user_friendly_names no
flush_on_last_del yes
fast_io_fail_tmo 5
dev_loss_tmo 30
max_fds 4096
}
devices {
device {
vendor "HITACHI"
product "DF.*"
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
}
device {
vendor "COMPELNT"
product "Compellent Vol"
no_path_retry fail
}
device {
# multipath.conf.default
vendor "DGC"
product ".*"
product_blacklist "LUNZ"
path_grouping_policy "group_by_prio"
path_checker "emc_clariion"
hardware_handler "1 emc"
prio "emc"
failback immediate
rr_weight "uniform"
# vdsm required configuration
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
features "0"
no_path_retry fail
}
}
[root@ovirt01 etc]# pvscan --cache > /dev/null && lvs
Incorrect metadata area header checksum on /dev/sda2 at offset 4096
Incorrect metadata area header checksum on /dev/sda2 at offset 4096
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync
Convert
glusterOVEngine centos_ovirt01 -wi-ao---- 50,00g
home centos_ovirt01 -wi-ao---- 10,00g
root centos_ovirt01 -wi-ao---- 50,00g
swap centos_ovirt01 -wi-ao---- 7,88g
2:08 p.m.
----- Original Message -----
From: "Stefano Danzi" <s.danzi(a)hawai.it>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Thursday, February 5, 2015 12:58:35 PM
Subject: Re: [ovirt-users] Self hosted engine iusses
Il 05/02/2015 11.52, Nir Soffer ha scritto:
> ----- Original Message -----
>
> After ovirt installation on host console I see this error every 5 minutes:
>
> [ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
> [ 1823.837228] device-mapper: ioctl: error adding target to table
> This may be caused by the fact that vdsm does not cleanup properly after
> deactivating storage domains. We have an open bugs on this.
>
> You may have an active lv using non-existent multipath device.
>
> Can you share with us the output of:
>
> lsblk
> multipath -ll
> dmsetup table
> cat /etc/multipath.conf
> pvscan --cache > /dev/null && lvs
>
> Nir
>
See above:
[root@ovirt01 etc]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 500M 0 part
│ └─md0 9:0 0 500M 0 raid1 /boot
└─sda2 8:2 0 931G 0 part
└─md1 9:1 0 930,9G 0 raid1
├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
├─centos_ovirt01-root 253:1 0 50G 0 lvm /
├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
└─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
/home/glusterfs/engine
sdb 8:16 0 931,5G 0 disk
├─sdb1 8:17 0 500M 0 part
│ └─md0 9:0 0 500M 0 raid1 /boot
└─sdb2 8:18 0 931G 0 part
└─md1 9:1 0 930,9G 0 raid1
├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
├─centos_ovirt01-root 253:1 0 50G 0 lvm /
├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
└─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
/home/glusterfs/engine
[root@ovirt01 etc]# multipath -ll
Feb 05 11:56:25 | multipath.conf +5, invalid keyword: getuid_callout
Feb 05 11:56:25 | multipath.conf +18, invalid keyword: getuid_callout
Feb 05 11:56:25 | multipath.conf +37, invalid keyword: getuid_callout
[root@ovirt01 etc]# dmsetup table
centos_ovirt01-home: 0 20971520 linear 9:1 121391104
centos_ovirt01-swap: 0 16531456 linear 9:1 2048
centos_ovirt01-root: 0 104857600 linear 9:1 16533504
centos_ovirt01-glusterOVEngine: 0 104857600 linear 9:1 142362624
[root@ovirt01 etc]# cat /etc/multipath.conf
# RHEV REVISION 1.1
defaults {
polling_interval 5
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
no_path_retry fail
user_friendly_names no
flush_on_last_del yes
fast_io_fail_tmo 5
dev_loss_tmo 30
max_fds 4096
}
devices {
device {
vendor "HITACHI"
product "DF.*"
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
}
device {
vendor "COMPELNT"
product "Compellent Vol"
no_path_retry fail
}
device {
# multipath.conf.default
vendor "DGC"
product ".*"
product_blacklist "LUNZ"
path_grouping_policy "group_by_prio"
path_checker "emc_clariion"
hardware_handler "1 emc"
prio "emc"
failback immediate
rr_weight "uniform"
# vdsm required configuration
getuid_callout "/usr/lib/udev/scsi_id --whitelisted
--replace-whitespace --device=/dev/%n"
features "0"
no_path_retry fail
}
}
[root@ovirt01 etc]# pvscan --cache > /dev/null && lvs
Incorrect metadata area header checksum on /dev/sda2 at offset 4096
Incorrect metadata area header checksum on /dev/sda2 at offset 4096
LV VG Attr LSize Pool Origin Data% Move
Log Cpy%Sync Convert
glusterOVEngine centos_ovirt01 -wi-ao---- 50,00g
home centos_ovirt01 -wi-ao---- 10,00g
root centos_ovirt01 -wi-ao---- 50,00g
swap centos_ovirt01 -wi-ao---- 7,88g
Are you sure this is the correct host that the multipath error came from?
There are no multipath devices in this host and no ovirt storage domains lvs.
Nir
2:17 p.m.
Il 05/02/2015 12.08, Nir Soffer ha scritto:
----- Original Message -----
> From: "Stefano Danzi" <s.danzi(a)hawai.it>
> To: "Nir Soffer" <nsoffer(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Thursday, February 5, 2015 12:58:35 PM
> Subject: Re: [ovirt-users] Self hosted engine iusses
>
>
> Il 05/02/2015 11.52, Nir Soffer ha scritto:
>> ----- Original Message -----
>>
>> After ovirt installation on host console I see this error every 5 minutes:
>>
>> [ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
>> [ 1823.837228] device-mapper: ioctl: error adding target to table
>> This may be caused by the fact that vdsm does not cleanup properly after
>> deactivating storage domains. We have an open bugs on this.
>>
>> You may have an active lv using non-existent multipath device.
>>
>> Can you share with us the output of:
>>
>> lsblk
>> multipath -ll
>> dmsetup table
>> cat /etc/multipath.conf
>> pvscan --cache > /dev/null && lvs
>>
>> Nir
>>
> See above:
>
> [root@ovirt01 etc]# lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> sda 8:0 0 931,5G 0 disk
> ├─sda1 8:1 0 500M 0 part
> │ └─md0 9:0 0 500M 0 raid1 /boot
> └─sda2 8:2 0 931G 0 part
> └─md1 9:1 0 930,9G 0 raid1
> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
> /home/glusterfs/engine
> sdb 8:16 0 931,5G 0 disk
> ├─sdb1 8:17 0 500M 0 part
> │ └─md0 9:0 0 500M 0 raid1 /boot
> └─sdb2 8:18 0 931G 0 part
> └─md1 9:1 0 930,9G 0 raid1
> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
> /home/glusterfs/engine
>
> [root@ovirt01 etc]# multipath -ll
> Feb 05 11:56:25 | multipath.conf +5, invalid keyword: getuid_callout
> Feb 05 11:56:25 | multipath.conf +18, invalid keyword: getuid_callout
> Feb 05 11:56:25 | multipath.conf +37, invalid keyword: getuid_callout
>
> [root@ovirt01 etc]# dmsetup table
> centos_ovirt01-home: 0 20971520 linear 9:1 121391104
> centos_ovirt01-swap: 0 16531456 linear 9:1 2048
> centos_ovirt01-root: 0 104857600 linear 9:1 16533504
> centos_ovirt01-glusterOVEngine: 0 104857600 linear 9:1 142362624
>
> [root@ovirt01 etc]# cat /etc/multipath.conf
> # RHEV REVISION 1.1
>
> defaults {
> polling_interval 5
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> no_path_retry fail
> user_friendly_names no
> flush_on_last_del yes
> fast_io_fail_tmo 5
> dev_loss_tmo 30
> max_fds 4096
> }
>
> devices {
> device {
> vendor "HITACHI"
> product "DF.*"
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> }
> device {
> vendor "COMPELNT"
> product "Compellent Vol"
> no_path_retry fail
> }
> device {
> # multipath.conf.default
> vendor "DGC"
> product ".*"
> product_blacklist "LUNZ"
> path_grouping_policy "group_by_prio"
> path_checker "emc_clariion"
> hardware_handler "1 emc"
> prio "emc"
> failback immediate
> rr_weight "uniform"
> # vdsm required configuration
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> features "0"
> no_path_retry fail
> }
> }
>
> [root@ovirt01 etc]# pvscan --cache > /dev/null && lvs
> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
> LV VG Attr LSize Pool Origin Data% Move
> Log Cpy%Sync Convert
> glusterOVEngine centos_ovirt01 -wi-ao---- 50,00g
> home centos_ovirt01 -wi-ao---- 10,00g
> root centos_ovirt01 -wi-ao---- 50,00g
> swap centos_ovirt01 -wi-ao---- 7,88g
Are you sure this is the correct host that the multipath error came from?
There are no multipath devices in this host and no ovirt storage domains lvs.
Nir
Yes this is the host. I'm sure.
I've not yet configured ovirt storage domains (only installed ovirt on host and self
hosted engine VM)
Here a part of /var/log/messages:
Feb 5 10:04:43 ovirt01 kernel: device-mapper: table: 253:4: multipath: error getting
device
Feb 5 10:04:43 ovirt01 kernel: device-mapper: ioctl: error adding target to table
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 kernel: device-mapper: table: 253:4: multipath: error getting
device
Feb 5 10:04:43 ovirt01 kernel: device-mapper: ioctl: error adding target to table
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
and kernel version:
[root@ovirt01 etc]# uname -a
Linux ovirt01.hawai.lan 3.10.0-123.20.1.el7.x86_64 #1 SMP Thu Jan 29 18:05:33 UTC 2015
x86_64 x86_64 x86_64 GNU/Linux
2:31 p.m.
----- Original Message -----
From: "Stefano Danzi" <s.danzi(a)hawai.it>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Thursday, February 5, 2015 1:17:01 PM
Subject: Re: [ovirt-users] Self hosted engine iusses
Il 05/02/2015 12.08, Nir Soffer ha scritto:
>
> ----- Original Message -----
>> From: "Stefano Danzi" <s.danzi(a)hawai.it>
>> To: "Nir Soffer" <nsoffer(a)redhat.com>
>> Cc: users(a)ovirt.org
>> Sent: Thursday, February 5, 2015 12:58:35 PM
>> Subject: Re: [ovirt-users] Self hosted engine iusses
>>
>>
>> Il 05/02/2015 11.52, Nir Soffer ha scritto:
>>> ----- Original Message -----
>>>
>>> After ovirt installation on host console I see this error every 5
>>> minutes:
>>>
>>> [ 1823.837020] device-mapper: table: 253:4: multipath: error getting
>>> device
>>> [ 1823.837228] device-mapper: ioctl: error adding target to table
>>> This may be caused by the fact that vdsm does not cleanup properly after
>>> deactivating storage domains. We have an open bugs on this.
>>>
>>> You may have an active lv using non-existent multipath device.
>>>
>>> Can you share with us the output of:
>>>
>>> lsblk
>>> multipath -ll
>>> dmsetup table
>>> cat /etc/multipath.conf
>>> pvscan --cache > /dev/null && lvs
>>>
>>> Nir
>>>
>> See above:
>>
>> [root@ovirt01 etc]# lsblk
>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
>> sda 8:0 0 931,5G 0 disk
>> ├─sda1 8:1 0 500M 0 part
>> │ └─md0 9:0 0 500M 0 raid1 /boot
>> └─sda2 8:2 0 931G 0 part
>> └─md1 9:1 0 930,9G 0 raid1
>> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
>> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
>> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
>> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
>> /home/glusterfs/engine
>> sdb 8:16 0 931,5G 0 disk
>> ├─sdb1 8:17 0 500M 0 part
>> │ └─md0 9:0 0 500M 0 raid1 /boot
>> └─sdb2 8:18 0 931G 0 part
>> └─md1 9:1 0 930,9G 0 raid1
>> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
>> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
>> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
>> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
>> /home/glusterfs/engine
>>
>> [root@ovirt01 etc]# multipath -ll
>> Feb 05 11:56:25 | multipath.conf +5, invalid keyword: getuid_callout
>> Feb 05 11:56:25 | multipath.conf +18, invalid keyword: getuid_callout
>> Feb 05 11:56:25 | multipath.conf +37, invalid keyword: getuid_callout
>>
>> [root@ovirt01 etc]# dmsetup table
>> centos_ovirt01-home: 0 20971520 linear 9:1 121391104
>> centos_ovirt01-swap: 0 16531456 linear 9:1 2048
>> centos_ovirt01-root: 0 104857600 linear 9:1 16533504
>> centos_ovirt01-glusterOVEngine: 0 104857600 linear 9:1 142362624
>>
>> [root@ovirt01 etc]# cat /etc/multipath.conf
>> # RHEV REVISION 1.1
>>
>> defaults {
>> polling_interval 5
>> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
>> --replace-whitespace --device=/dev/%n"
>> no_path_retry fail
>> user_friendly_names no
>> flush_on_last_del yes
>> fast_io_fail_tmo 5
>> dev_loss_tmo 30
>> max_fds 4096
>> }
>>
>> devices {
>> device {
>> vendor "HITACHI"
>> product "DF.*"
>> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
>> --replace-whitespace --device=/dev/%n"
>> }
>> device {
>> vendor "COMPELNT"
>> product "Compellent Vol"
>> no_path_retry fail
>> }
>> device {
>> # multipath.conf.default
>> vendor "DGC"
>> product ".*"
>> product_blacklist "LUNZ"
>> path_grouping_policy "group_by_prio"
>> path_checker "emc_clariion"
>> hardware_handler "1 emc"
>> prio "emc"
>> failback immediate
>> rr_weight "uniform"
>> # vdsm required configuration
>> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
>> --replace-whitespace --device=/dev/%n"
>> features "0"
>> no_path_retry fail
>> }
>> }
>>
>> [root@ovirt01 etc]# pvscan --cache > /dev/null && lvs
>> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
>> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
>> LV VG Attr LSize Pool Origin Data%
>> Move
>> Log Cpy%Sync Convert
>> glusterOVEngine centos_ovirt01 -wi-ao---- 50,00g
>> home centos_ovirt01 -wi-ao---- 10,00g
>> root centos_ovirt01 -wi-ao---- 50,00g
>> swap centos_ovirt01 -wi-ao---- 7,88g
> Are you sure this is the correct host that the multipath error came from?
>
> There are no multipath devices in this host and no ovirt storage domains
> lvs.
>
> Nir
>
Yes this is the host. I'm sure.
I've not yet configured ovirt storage domains (only installed ovirt on host
and self hosted engine VM)
Here a part of /var/log/messages:
Feb 5 10:04:43 ovirt01 kernel: device-mapper: table: 253:4: multipath: error
getting device
Feb 5 10:04:43 ovirt01 kernel: device-mapper: ioctl: error adding target to
table
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 kernel: device-mapper: table: 253:4: multipath: error
getting device
Feb 5 10:04:43 ovirt01 kernel: device-mapper: ioctl: error adding target to
table
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
Feb 5 10:04:43 ovirt01 multipathd: dm-4: remove map (uevent)
and kernel version:
[root@ovirt01 etc]# uname -a
Linux ovirt01.hawai.lan 3.10.0-123.20.1.el7.x86_64 #1 SMP Thu Jan 29 18:05:33
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
Can you attach vdsm logs? (/var/log/vdsm/vdsm.log*)
Nir
3578
days inactive
3578
days old
6 comments
3 participants
participants (3)
-
Nir Soffer -
Stefano Danzi -
Yedidyah Bar David