Ansible playbook timeout
Version 4.2.8.2-1.0.9.el7 Per the info near the bottom of /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf I should be able to create this file, /etc/ovirt-engine/engine.conf.d/99-ansible-playbook-timeout.conf and place in the file these contents, ANSIBLE_PLAYBOOK_EXEC_DEFAULT_TIMEOUT=150 and extend the playbook timeout. It doesn't work, still times out after 30 minutes. Any suggested workarounds?
Restarted ovirt-engine service, correct? Which kind of playbooks? Il Dom 15 Mar 2020, 14:44 Barrett Richardson <barrettr@hushmail.com> ha scritto:
Version 4.2.8.2-1.0.9.el7
Per the info near the bottom of /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf I should be able to create this file,
/etc/ovirt-engine/engine.conf.d/99-ansible-playbook-timeout.conf
and place in the file these contents,
ANSIBLE_PLAYBOOK_EXEC_DEFAULT_TIMEOUT=150
and extend the playbook timeout. It doesn't work, still times out after 30 minutes. Any suggested workarounds? _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UMKQAVQQIN6XU6...
Yes, restarted ovirt-engine service. Rebooted even. I'm trying the Reinstall operation on a new host I'm trying to add to a cluster. Compute --> Hosts --> olvmHost1 and the tabs are [Edit][Remove][Management][Installation][Host Console]. Installation has a pull down menu with options Reinstall, Enroll Certificate, Check for Upgrade. On 3/15/2020 at 10:03 AM, "Gianluca Cecchi" wrote:Restarted ovirt-engine service, correct?Which kind of playbooks? Il Dom 15 Mar 2020, 14:44 Barrett Richardson ha scritto: Version 4.2.8.2-1.0.9.el7 Per the info near the bottom of /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf I should be able to create this file, /etc/ovirt-engine/engine.conf.d/99-ansible-playbook-timeout.conf and place in the file these contents, ANSIBLE_PLAYBOOK_EXEC_DEFAULT_TIMEOUT=150 and extend the playbook timeout. It doesn't work, still times out after 30 minutes. Any suggested workarounds? _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UMKQAVQQIN6XU6...
This is all that should be needed, I've done so on my engine and it works fine to set the timeout much higher. My guess is that you did not restart the engine after changing the config. On Sun, Mar 15, 2020 at 10:44 AM Barrett Richardson <barrettr@hushmail.com> wrote:
Version 4.2.8.2-1.0.9.el7
Per the info near the bottom of /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf I should be able to create this file,
/etc/ovirt-engine/engine.conf.d/99-ansible-playbook-timeout.conf
and place in the file these contents,
ANSIBLE_PLAYBOOK_EXEC_DEFAULT_TIMEOUT=150
and extend the playbook timeout. It doesn't work, still times out after 30 minutes. Any suggested workarounds? _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UMKQAVQQIN6XU6...
Its looks like key SSHInactivityHardTimeoutSeconds was the source of my grief. On 3/15/2020 at 10:14 AM, "Jayme" wrote:This is all that should be needed, I've done so on my engine and it works fine to set the timeout much higher. My guess is that you did not restart the engine after changing the config. On Sun, Mar 15, 2020 at 10:44 AM Barrett Richardson wrote: Version 4.2.8.2-1.0.9.el7 Per the info near the bottom of /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf I should be able to create this file, /etc/ovirt-engine/engine.conf.d/99-ansible-playbook-timeout.conf and place in the file these contents, ANSIBLE_PLAYBOOK_EXEC_DEFAULT_TIMEOUT=150 and extend the playbook timeout. It doesn't work, still times out after 30 minutes. Any suggested workarounds? _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UMKQAVQQIN6XU6...
participants (3)
-
Barrett Richardson -
Gianluca Cecchi -
Jayme