Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_oVirt_engine#Deploying_engine-config_.26_en... and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing?

From: "Yuval M" <yuvalme(a)gmail.com&gt; To: "Juan Hernandez" <jhernand(a)redhat.com&gt;, users(a)ovirt.org Cc: "Limor Gavish" <lgavish(a)gmail.com&gt; Sent: Sunday, February 24, 2013 11:38:12 PM Subject: Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop." Still having trouble with the build process (Ovirt 3.1): $ sudo make ... (success) ... $ sudo make install ... inflating: /usr/local/share/ovirt-engine/engine.ear/webadmin.war/META-INF/maven/org.ovirt.engine.ui/webadmin/pom.xml inflating: /usr/local/share/ovirt-engine/engine.ear/webadmin.war/404.html checkdir error: /usr/local/share/ovirt-engine/engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/engine/core/bll/VdsDeploy$32.class. checkdir error: /usr/local/share/ovirt-engine/engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/engine/core/bll/InitBackendServicesOnStartupBean.class. ... make: *** [install_artifacts] Error 2 any insights? Thanks... On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com > wrote: On 01/24/2013 04:20 PM, Yuval M wrote: Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- config_.26_engine-manage- domains and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Those instructions are out of date, use "make install". That installs the files, but you will still need some changes to make the engine work: 1. Create the ovirt user (the engine runs by default with this service, unless you change the /etc/syscofig/ovirt-engine file and add the ENGINE_USER and ENGINE_GROUP parameters): useradd ovirt 2. Create (mkdir -p ...) and change the ownership of the directories that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): /etc/ovirt-engine /var/log/ovirt-engine /var/lock/ovirt-engine /var/lib/ovirt-engine/content /var/lib/ovirt-engine/ deployments /var/tmp/ovirt-engine /var/cache/ovirt-engine 3. Enable the HTTP connector in the engine (the default is to enable only AJP, and that doesn't work without Apache as frontend) adding the following to the /etc/sysconfig/ovirt-engine file: ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false 4. Configure database connection details (the default in development environments is to use the postgres user and the trust mode) adding this to /etc/sysconfig/ovirt-engine: ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm -q postgresql-jdbc) and install it if needed (yum install postgresql-jdbc). 6. Now you can start the engine running the engine-service script: engine-service start Look at the system log (the file /var/log/messages) and the engine logs (the files /var/log/ovirt-engine/server. log and /var/log/ovirt-engine) for errors. 7. Connect to http://localhost:8700 and you should be able to login with user admin and letmein! as password. Note that I am assuming that you already created the database, and that you want to use this installation for development. If you are looking for an production installation I suggest using the RPMs. Also I tested this with the latest source from the repository, it will not work with older versions. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

On 02/26/2013 02:19 PM, Doron Fediuck wrote: > > > ----- Original Message ----- > >> From: "Yuval M" <yuvalme(a)gmail.com&gt; >> To: "Juan Hernandez" <jhernand(a)redhat.com&gt;, users(a)ovirt.org >> Cc: "Limor Gavish" <lgavish(a)gmail.com&gt; >> Sent: Sunday, February 24, 2013 11:38:12 PM >> Subject: Re: [Users] Trouble building Ovirt from source - "No rule to >> make target `install_tools'. Stop." >> >> >> >> >> Still having trouble with the build process (Ovirt 3.1): >> $ sudo make >> ... (success) ... >> $ sudo make install ... >> >> inflating: >> /usr/local/share/ovirt-engine/**engine.ear/webadmin.war/META-** >> INF/maven/org.ovirt.engine.ui/**webadmin/pom.xml >> inflating: >> /usr/local/share/ovirt-engine/**engine.ear/webadmin.war/404.**html >> checkdir error: >> /usr/local/share/ovirt-engine/**engine.ear/engine-bll.jar exists but >> is not directory >> unable to process >> engine-bll.jar/org/ovirt/**engine/core/bll/VdsDeploy$32.**class. >> checkdir error: >> /usr/local/share/ovirt-engine/**engine.ear/engine-bll.jar exists but >> is not directory >> unable to process >> engine-bll.jar/org/ovirt/**engine/core/bll/** >> InitBackendServicesOnStartupBe**an.class. >> ... >> make: *** [install_artifacts] Error 2 >> >> >> >> >> any insights? >> >> >> Thanks... >> >> >> >> On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com >> >>> wrote: >>> >> >> >> >> >> On 01/24/2013 04:20 PM, Yuval M wrote: >> >> >> Hi, >> I'm installing Ovirt 3.1 on Fedora using this guide: >> http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- >> config_.26_engine-manage- domains >> >> and I'm getting the error in the subject from make. >> there is indeed no rule for install_tools in the makefile. >> >> What am I missing? >> >> Those instructions are out of date, use "make install". That installs >> the files, but you will still need some changes to make the engine >> work: >> >> 1. Create the ovirt user (the engine runs by default with this >> service, unless you change the /etc/syscofig/ovirt-engine file and >> add the ENGINE_USER and ENGINE_GROUP parameters): >> >> useradd ovirt >> >> 2. Create (mkdir -p ...) and change the ownership of the directories >> that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): >> >> /etc/ovirt-engine >> /var/log/ovirt-engine >> /var/lock/ovirt-engine >> /var/lib/ovirt-engine/content >> /var/lib/ovirt-engine/ deployments >> /var/tmp/ovirt-engine >> /var/cache/ovirt-engine >> >> 3. Enable the HTTP connector in the engine (the default is to enable >> only AJP, and that doesn't work without Apache as frontend) adding >> the following to the /etc/sysconfig/ovirt-engine file: >> >> ENGINE_PROXY_ENABLED=false >> ENGINE_HTTP_ENABLED=true >> ENGINE_HTTP_PORT=8700 >> ENGINE_HTTPS_ENABLED=false >> ENGINE_AJP_ENABLED=false >> >> 4. Configure database connection details (the default in development >> environments is to use the postgres user and the trust mode) adding >> this to /etc/sysconfig/ovirt-engine: >> >> ENGINE_DB_USER=postgres >> ENGINE_DB_PASSWORD= >> >> 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm >> -q postgresql-jdbc) and install it if needed (yum install >> postgresql-jdbc). >> >> 6. Now you can start the engine running the engine-service script: >> >> engine-service start >> >> Look at the system log (the file /var/log/messages) and the engine >> logs (the files /var/log/ovirt-engine/server. log and >> /var/log/ovirt-engine) for errors. >> >> 7. Connect to http://localhost:8700 and you should be able to login >> with user admin and letmein! as password. >> >> Note that I am assuming that you already created the database, and >> that you want to use this installation for development. If you are >> looking for an production installation I suggest using the RPMs. >> >> Also I tested this with the latest source from the repository, it >> will not work with older versions. >> >> -- >> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta >> 3ºD, 28016 Madrid, Spain >> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat >> S.L. >> >> >> > Any progress here? > > Yuval, that will not work with 3.1. Please use 3.2 and the following instructions: http://www.ovirt.org/Building_**Engine_Draft<http://www.ovirt.org/Buil... -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

On 03/08/2013 03:49 PM, Yuval M wrote: > OK, > brand new machine, > Fedora 18 (x64), > Trying to install Ovirt 3.2 from sources according to: > http://www.ovirt.org/Building___Engine_Draft > <http://www.ovirt.org/Building_Engine_Draft> > > Everything is good up to the following stage: > "Now you need to do some adjustments to the configuration file > $HOME/ovirt-engine/installation/etc/sysconfig/ovirt-engine" > > The "sysconfig" directory does not exist. so does the "ovirt-engine" > configuration file (searched through the $HOME/ovirt-engine tree). > I didn't find any code in the Makefile > ($HOME/ovirt-engine/repository/Makefile) that would create them, > What am I missing? > This has changed recently and I didn't update that wiki page. The /etc/sysconig/ovirt-engine file has been replaced by /etc/ovirt-engine/engine.conf.

> Thanks, > > Yuval > > On Tue, Feb 26, 2013 at 3:25 PM, Juan Hernandez <jhernand(a)redhat.com > <mailto:jhernand@redhat.com>> wrote: > > On 02/26/2013 02:19 PM, Doron Fediuck wrote: > > > > ----- Original Message ----- > > From: "Yuval M" <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com>> > To: "Juan Hernandez" <jhernand(a)redhat.com > <mailto:jhernand@redhat.com>>, users(a)ovirt.org > <mailto:users@ovirt.org> > Cc: "Limor Gavish" <lgavish(a)gmail.com > <mailto:lgavish@gmail.com>> > Sent: Sunday, February 24, 2013 11:38:12 PM > Subject: Re: [Users] Trouble building Ovirt from source - > "No rule to make target `install_tools'. Stop." > > > > > Still having trouble with the build process (Ovirt 3.1): > $ sudo make > ... (success) ... > $ sudo make install ... > > inflating: > /usr/local/share/ovirt-engine/__engine.ear/webadmin.war/META-__INF/maven/org.ovirt.engine.ui/__webadmin/pom.xml > inflating: > /usr/local/share/ovirt-engine/__engine.ear/webadmin.war/404.__html > checkdir error: > /usr/local/share/ovirt-engine/__engine.ear/engine-bll.jar > exists but > is not directory > unable to process > engine-bll.jar/org/ovirt/__engine/core/bll/VdsDeploy$32.__class. > checkdir error: > /usr/local/share/ovirt-engine/__engine.ear/engine-bll.jar > exists but > is not directory > unable to process > engine-bll.jar/org/ovirt/__engine/core/bll/__InitBackendServicesOnStartupBe__an.class. > ... > make: *** [install_artifacts] Error 2 > > > > > any insights? > > > Thanks... > > > > On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < > jhernand(a)redhat.com <mailto:jhernand@redhat.com> > > wrote: > > > > > > On 01/24/2013 04:20 PM, Yuval M wrote: > > > Hi, > I'm installing Ovirt 3.1 on Fedora using this guide: > http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- > config_.26_engine-manage- domains > > and I'm getting the error in the subject from make. > there is indeed no rule for install_tools in the makefile. > > What am I missing? > > Those instructions are out of date, use "make install". That > installs > the files, but you will still need some changes to make the > engine > work: > > 1. Create the ovirt user (the engine runs by default with this > service, unless you change the /etc/syscofig/ovirt-engine > file and > add the ENGINE_USER and ENGINE_GROUP parameters): > > useradd ovirt > > 2. Create (mkdir -p ...) and change the ownership of the > directories > that the engine needs to own to ovirt:ovirt (chown > ovirt:ovirt ...): > > /etc/ovirt-engine > /var/log/ovirt-engine > /var/lock/ovirt-engine > /var/lib/ovirt-engine/content > /var/lib/ovirt-engine/ deployments > /var/tmp/ovirt-engine > /var/cache/ovirt-engine > > 3. Enable the HTTP connector in the engine (the default is > to enable > only AJP, and that doesn't work without Apache as frontend) > adding > the following to the /etc/sysconfig/ovirt-engine file: > > ENGINE_PROXY_ENABLED=false > ENGINE_HTTP_ENABLED=true > ENGINE_HTTP_PORT=8700 > ENGINE_HTTPS_ENABLED=false > ENGINE_AJP_ENABLED=false > > 4. Configure database connection details (the default in > development > environments is to use the postgres user and the trust mode) > adding > this to /etc/sysconfig/ovirt-engine: > > ENGINE_DB_USER=postgres > ENGINE_DB_PASSWORD= > > 5. Make sure that you have the PostgreSQL JDBC driver > installed (rpm > -q postgresql-jdbc) and install it if needed (yum install > postgresql-jdbc). > > 6. Now you can start the engine running the engine-service > script: > > engine-service start > > Look at the system log (the file /var/log/messages) and the > engine > logs (the files /var/log/ovirt-engine/server. log and > /var/log/ovirt-engine) for errors. > > 7. Connect to http://localhost:8700 and you should be able > to login > with user admin and letmein! as password. > > Note that I am assuming that you already created the > database, and > that you want to use this installation for development. If > you are > looking for an production installation I suggest using the RPMs. > > Also I tested this with the latest source from the > repository, it > will not work with older versions. > > -- > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea > 3, planta > 3ºD, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - > Red Hat > S.L. > > > > Any progress here? > > > Yuval, that will not work with 3.1. Please use 3.2 and the following > instructions: > > http://www.ovirt.org/Building___Engine_Draft > <http://www.ovirt.org/Building_Engine_Draft> > > > -- > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, > planta 3ºD, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat > S.L. > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

checked out to 3.2 branch, now the configuration file was as detailed in the wiki. after configuring it I try to start the engine and get: [wil@bufferoverflow bin]$ pwd /home/wil/ovirt-engine/installation/bin [wil@bufferoverflow bin]$ ./engine-service start Traceback (most recent call last): File "./engine-service", line 23, in <module> import configobj ImportError: No module named configobj [wil@bufferoverflow bin]$

On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com>> wrote: On 03/08/2013 03:51 PM, Juan Hernandez wrote: On 03/08/2013 03:49 PM, Yuval M wrote: OK, brand new machine, Fedora 18 (x64), Trying to install Ovirt 3.2 from sources according to: http://www.ovirt.org/Building_____Engine_Draft <http://www.ovirt.org/Building___Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>> Everything is good up to the following stage: "Now you need to do some adjustments to the configuration file $HOME/ovirt-engine/__installation/etc/sysconfig/__ovirt-engine" The "sysconfig" directory does not exist. so does the "ovirt-engine" configuration file (searched through the $HOME/ovirt-engine tree). I didn't find any code in the Makefile ($HOME/ovirt-engine/__repository/Makefile) that would create them, What am I missing? This has changed recently and I didn't update that wiki page. The /etc/sysconig/ovirt-engine file has been replaced by /etc/ovirt-engine/engine.conf. But wait, this change was made in the master branch, not in 3.2, so it shouldn't be a problem. Are you sure you are using the engine_3.2 branch? Thanks, Yuval On Tue, Feb 26, 2013 at 3:25 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: On 02/26/2013 02:19 PM, Doron Fediuck wrote: ----- Original Message ----- From: "Yuval M" <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>> To: "Juan Hernandez" <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>, users(a)ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> Cc: "Limor Gavish" <lgavish(a)gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>> Sent: Sunday, February 24, 2013 11:38:12 PM Subject: Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop." Still having trouble with the build process (Ovirt 3.1): $ sudo make ... (success) ... $ sudo make install ... inflating: /usr/local/share/ovirt-engine/____engine.ear/webadmin.war/__META-__INF/maven/org.ovirt.__engine.ui/__webadmin/pom.xml inflating: /usr/local/share/ovirt-engine/____engine.ear/webadmin.war/404.____html checkdir error: /usr/local/share/ovirt-engine/____engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/____engine/core/bll/VdsDeploy$32.____class. checkdir error: /usr/local/share/ovirt-engine/____engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/____engine/core/bll/____InitBackendServicesOnStartupBe____an.class. ... make: *** [install_artifacts] Error 2 any insights? Thanks... On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> wrote: On 01/24/2013 04:20 PM, Yuval M wrote: Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- config_.26_engine-manage- domains and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Those instructions are out of date, use "make install". That installs the files, but you will still need some changes to make the engine work: 1. Create the ovirt user (the engine runs by default with this service, unless you change the /etc/syscofig/ovirt-engine file and add the ENGINE_USER and ENGINE_GROUP parameters): useradd ovirt 2. Create (mkdir -p ...) and change the ownership of the directories that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): /etc/ovirt-engine /var/log/ovirt-engine /var/lock/ovirt-engine /var/lib/ovirt-engine/content /var/lib/ovirt-engine/ deployments /var/tmp/ovirt-engine /var/cache/ovirt-engine 3. Enable the HTTP connector in the engine (the default is to enable only AJP, and that doesn't work without Apache as frontend) adding the following to the /etc/sysconfig/ovirt-engine file: ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false 4. Configure database connection details (the default in development environments is to use the postgres user and the trust mode) adding this to /etc/sysconfig/ovirt-engine: ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm -q postgresql-jdbc) and install it if needed (yum install postgresql-jdbc). 6. Now you can start the engine running the engine-service script: engine-service start Look at the system log (the file /var/log/messages) and the engine logs (the files /var/log/ovirt-engine/server. log and /var/log/ovirt-engine) for errors. 7. Connect to http://localhost:8700 and you should be able to login with user admin and letmein! as password. Note that I am assuming that you already created the database, and that you want to use this installation for development. If you are looking for an production installation I suggest using the RPMs. Also I tested this with the latest source from the repository, it will not work with older versions. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. Any progress here? Yuval, that will not work with 3.1. Please use 3.2 and the following instructions: http://www.ovirt.org/Building_____Engine_Draft <http://www.ovirt.org/Building___Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. _________________________________________________ Users mailing list Users(a)ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/__mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

Thanks, now "./engine-service start" succeeded. /[root@bufferoverflow bin]# ./engine-service start/ /Starting engine-service: [ OK ]/ However, when I try to access "http://localhost:8700" I get an empty page (0 bytes). I see the following errors in /home/wil/ovirt-engine/installation/var/log/ovirt-engine/server.log JBAS014777: Services which failed to start: service jboss.deployment.subunit."engine.ear"."engine-bll.jar".component.UsersDomainsCacheManagerService.START: org.jboss.msc.service.StartException in service jboss.deployment.subunit."engine.ear"."engine-bll.jar".component.UsersDomainsCacheManagerService.START: Failed to start service 2013-03-08 19:27:51,495 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-2" => {"JBAS014671: Failed services" => {"jboss.deployment.subunit.\"engine.ear\".\"engine-bll.jar\".component.UsersDomainsCacheManagerService.START" => "org.jboss.msc.service.StartException in service jboss.deployment.subunit.\"engine.ear\".\"engine-bll.jar\".component.UsersDomainsCacheManagerService.START: Failed to start service"}}}} Here is the contents of my configuration file: [root@bufferoverflow installation]# cat etc/sysconfig/ovirt-engine # # For descriptions of the parameters and their default values look # at the /usr/share/ovirt-engine/conf/engine.conf.defaults file. # # Please note that the engine installation tool engine-setup will # append the modified parameters to the end of this file. # JAVA_HOME=/usr/lib/jvm/jre-1.7.0-openjdk.x86_64 JBOSS_HOME=/home/wil/ovirt-engine/jboss-as-7.1.1.Final ENGINE_USER=wil ENGINE_GROUP=wil ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= ENGINE_DEBUG_ADDRESS=0.0.0.0:8787 <http://0.0.0.0:8787> Thank you very much for your help

Yuval On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com>> wrote: On 03/08/2013 05:14 PM, Yuval M wrote: checked out to 3.2 branch, now the configuration file was as detailed in the wiki. after configuring it I try to start the engine and get: [wil@bufferoverflow bin]$ pwd /home/wil/ovirt-engine/__installation/bin [wil@bufferoverflow bin]$ ./engine-service start Traceback (most recent call last): File "./engine-service", line 23, in <module> import configobj ImportError: No module named configobj [wil@bufferoverflow bin]$ Ok, this is because the service script needs the python-configobj and python-cheetah packages: yum install python-configobj python-cheetah On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: On 03/08/2013 03:51 PM, Juan Hernandez wrote: On 03/08/2013 03:49 PM, Yuval M wrote: OK, brand new machine, Fedora 18 (x64), Trying to install Ovirt 3.2 from sources according to: http://www.ovirt.org/Building_______Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>> Everything is good up to the following stage: "Now you need to do some adjustments to the configuration file $HOME/ovirt-engine/____installation/etc/sysconfig/____ovirt-engine" The "sysconfig" directory does not exist. so does the "ovirt-engine" configuration file (searched through the $HOME/ovirt-engine tree). I didn't find any code in the Makefile ($HOME/ovirt-engine/____repository/Makefile) that would create them, What am I missing? This has changed recently and I didn't update that wiki page. The /etc/sysconig/ovirt-engine file has been replaced by /etc/ovirt-engine/engine.conf. But wait, this change was made in the master branch, not in 3.2, so it shouldn't be a problem. Are you sure you are using the engine_3.2 branch? Thanks, Yuval On Tue, Feb 26, 2013 at 3:25 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> wrote: On 02/26/2013 02:19 PM, Doron Fediuck wrote: ----- Original Message ----- From: "Yuval M" <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>>> To: "Juan Hernandez" <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__, users(a)ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> Cc: "Limor Gavish" <lgavish(a)gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>> Sent: Sunday, February 24, 2013 11:38:12 PM Subject: Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop." Still having trouble with the build process (Ovirt 3.1): $ sudo make ... (success) ... $ sudo make install ... inflating: /usr/local/share/ovirt-engine/______engine.ear/webadmin.war/____META-__INF/maven/org.ovirt.____engine.ui/__webadmin/pom.xml inflating: /usr/local/share/ovirt-engine/______engine.ear/webadmin.war/__404.____html checkdir error: /usr/local/share/ovirt-engine/______engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/______engine/core/bll/VdsDeploy$32.______class. checkdir error: /usr/local/share/ovirt-engine/______engine.ear/engine-bll.jar exists but is not directory unable to process engine-bll.jar/org/ovirt/______engine/core/bll/______InitBackendServicesOnStartupBe______an.class. ... make: *** [install_artifacts] Error 2 any insights? Thanks... On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: On 01/24/2013 04:20 PM, Yuval M wrote: Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- config_.26_engine-manage- domains and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Those instructions are out of date, use "make install". That installs the files, but you will still need some changes to make the engine work: 1. Create the ovirt user (the engine runs by default with this service, unless you change the /etc/syscofig/ovirt-engine file and add the ENGINE_USER and ENGINE_GROUP parameters): useradd ovirt 2. Create (mkdir -p ...) and change the ownership of the directories that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): /etc/ovirt-engine /var/log/ovirt-engine /var/lock/ovirt-engine /var/lib/ovirt-engine/content /var/lib/ovirt-engine/ deployments /var/tmp/ovirt-engine /var/cache/ovirt-engine 3. Enable the HTTP connector in the engine (the default is to enable only AJP, and that doesn't work without Apache as frontend) adding the following to the /etc/sysconfig/ovirt-engine file: ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false 4. Configure database connection details (the default in development environments is to use the postgres user and the trust mode) adding this to /etc/sysconfig/ovirt-engine: ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm -q postgresql-jdbc) and install it if needed (yum install postgresql-jdbc). 6. Now you can start the engine running the engine-service script: engine-service start Look at the system log (the file /var/log/messages) and the engine logs (the files /var/log/ovirt-engine/server. log and /var/log/ovirt-engine) for errors. 7. Connect to http://localhost:8700 and you should be able to login with user admin and letmein! as password. Note that I am assuming that you already created the database, and that you want to use this installation for development. If you are looking for an production installation I suggest using the RPMs. Also I tested this with the latest source from the repository, it will not work with older versions. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. Any progress here? Yuval, that will not work with 3.1. Please use 3.2 and the following instructions: http://www.ovirt.org/Building_______Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___________________________________________________ Users mailing list Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users> <http://lists.ovirt.org/__mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

I attached the logs, here is the output from the commands you suggested:

* * *[root@bufferoverflow bin]# psql -U postgres engine* psql (9.2.3) Type "help" for help. engine=# select count(*) from vdc_options; count ------- 345 (1 row) *[root@bufferoverflow bin]# find /home/wil/ovirt-engine/installation -name postgresql.jar* *[root@bufferoverflow bin]# find /home/wil/ovirt-engine/installation -name postg\** /home/wil/ovirt-engine/installation/share/ovirt-engine/modules/org/postgresql /home/wil/ovirt-engine/installation/share/ovirt-engine/modules/org/postgresql/main/postgresql-jdbc.jar /home/wil/ovirt-engine/installation/share/ovirt-engine/modules/org/postgresql/main/postgresql-jdbc.jar.index *[root@bufferoverflow bin]# ls -la /home/wil/ovirt-engine/installation/share/ovirt-engine/modules/org/* total 12 drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 . drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 postgresql *[root@bufferoverflow bin]# ls -la /home/wil/ovirt-engine/installation/share/ovirt-engine/modules/org/postgresql/main/* total 544 drwxr-xr-x. 2 wil wil 4096 Mar 8 18:46 . drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. -rw-r--r--. 1 wil wil 307 Mar 8 18:03 module.xml -rw-rw-r--. 1 wil wil 539705 Mar 7 16:41 postgresql-jdbc.jar -rw-rw-r--. 1 wil wil 545 Mar 8 18:46 postgresql-jdbc.jar.index I appreciate your help Yuval On Fri, Mar 8, 2013 at 7:44 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com>> wrote: On 03/08/2013 06:38 PM, Yuval M wrote: Thanks, now "./engine-service start" succeeded. /[root@bufferoverflow bin]# ./engine-service start/ /Starting engine-service: [ OK ]/ However, when I try to access "http://localhost:8700" I get an empty page (0 bytes). I see the following errors in /home/wil/ovirt-engine/__installation/var/log/ovirt-__engine/server.log JBAS014777: Services which failed to start: service jboss.deployment.subunit."__engine.ear"."engine-bll.jar".__component.__UsersDomainsCacheManagerServic__e.START: org.jboss.msc.service.__StartException in service jboss.deployment.subunit."__engine.ear"."engine-bll.jar".__component.__UsersDomainsCacheManagerServic__e.START: Failed to start service 2013-03-08 19:27:51,495 ERROR [org.jboss.as.server.__deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-2" => {"JBAS014671: Failed services" => {"jboss.deployment.subunit.\"__engine.ear\".\"engine-bll.jar\__".component.__UsersDomainsCacheManagerServic__e.START" => "org.jboss.msc.service.__StartException in service jboss.deployment.subunit.\"__engine.ear\".\"engine-bll.jar\__".component.__UsersDomainsCacheManagerServic__e.START: Failed to start service"}}}} Here is the contents of my configuration file: [root@bufferoverflow installation]# cat etc/sysconfig/ovirt-engine # # For descriptions of the parameters and their default values look # at the /usr/share/ovirt-engine/conf/__engine.conf.defaults file. # # Please note that the engine installation tool engine-setup will # append the modified parameters to the end of this file. # JAVA_HOME=/usr/lib/jvm/jre-1.__7.0-openjdk.x86_64 JBOSS_HOME=/home/wil/ovirt-__engine/jboss-as-7.1.1.Final ENGINE_USER=wil ENGINE_GROUP=wil ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= ENGINE_DEBUG_ADDRESS=0.0.0.0:__8787 <http://0.0.0.0:8787> <http://0.0.0.0:8787> Thank you very much for your help Can you share the server.log and engine.log files? If possible stop the engine, clean the files, start again and then collect and provide the files. Not sure, but I guess that you are having some problem with the database, so please check the following: 1. Try to connect to the database manually: psql -U postgres engine engine# select count(*) from vdc_options; 2. Make sure that the JDBC driver is in the right place and that it points to the right file if it is a symbolic link: find home/wil/ovirt-engine/__installation -name postgresql.jar Yuval On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: On 03/08/2013 05:14 PM, Yuval M wrote: checked out to 3.2 branch, now the configuration file was as detailed in the wiki. after configuring it I try to start the engine and get: [wil@bufferoverflow bin]$ pwd /home/wil/ovirt-engine/____installation/bin [wil@bufferoverflow bin]$ ./engine-service start Traceback (most recent call last): File "./engine-service", line 23, in <module> import configobj ImportError: No module named configobj [wil@bufferoverflow bin]$ Ok, this is because the service script needs the python-configobj and python-cheetah packages: yum install python-configobj python-cheetah On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> wrote: On 03/08/2013 03:51 PM, Juan Hernandez wrote: On 03/08/2013 03:49 PM, Yuval M wrote: OK, brand new machine, Fedora 18 (x64), Trying to install Ovirt 3.2 from sources according to: http://www.ovirt.org/Building_________Engine_Draft <http://www.ovirt.org/Building_______Engine_Draft> <http://www.ovirt.org/__Building_____Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft>> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>>> Everything is good up to the following stage: "Now you need to do some adjustments to the configuration file $HOME/ovirt-engine/______installation/etc/sysconfig/______ovirt-engine" The "sysconfig" directory does not exist. so does the "ovirt-engine" configuration file (searched through the $HOME/ovirt-engine tree). I didn't find any code in the Makefile ($HOME/ovirt-engine/______repository/Makefile) that would create them, What am I missing? This has changed recently and I didn't update that wiki page. The /etc/sysconig/ovirt-engine file has been replaced by /etc/ovirt-engine/engine.conf. But wait, this change was made in the master branch, not in 3.2, so it shouldn't be a problem. Are you sure you are using the engine_3.2 branch? Thanks, Yuval On Tue, Feb 26, 2013 at 3:25 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__> wrote: On 02/26/2013 02:19 PM, Doron Fediuck wrote: ----- Original Message ----- From: "Yuval M" <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>>>> To: "Juan Hernandez" <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__>__, users(a)ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> Cc: "Limor Gavish" <lgavish(a)gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>>> Sent: Sunday, February 24, 2013 11:38:12 PM Subject: Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop." Still having trouble with the build process (Ovirt 3.1): $ sudo make ... (success) ... $ sudo make install ... inflating: /usr/local/share/ovirt-engine/________engine.ear/webadmin.war/______META-__INF/maven/org.__ovirt.____engine.ui/____webadmin/pom.xml inflating: /usr/local/share/ovirt-engine/________engine.ear/webadmin.war/____404.____html checkdir error: /usr/local/share/ovirt-engine/________engine.ear/engine-bll.__jar exists but is not directory unable to process engine-bll.jar/org/ovirt/________engine/core/bll/VdsDeploy$32.________class. checkdir error: /usr/local/share/ovirt-engine/________engine.ear/engine-bll.__jar exists but is not directory unable to process engine-bll.jar/org/ovirt/________engine/core/bll/________InitBackendServicesOnStartupBe________an.class. ... make: *** [install_artifacts] Error 2 any insights? Thanks... On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> wrote: On 01/24/2013 04:20 PM, Yuval M wrote: Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- config_.26_engine-manage- domains and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Those instructions are out of date, use "make install". That installs the files, but you will still need some changes to make the engine work: 1. Create the ovirt user (the engine runs by default with this service, unless you change the /etc/syscofig/ovirt-engine file and add the ENGINE_USER and ENGINE_GROUP parameters): useradd ovirt 2. Create (mkdir -p ...) and change the ownership of the directories that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): /etc/ovirt-engine /var/log/ovirt-engine /var/lock/ovirt-engine /var/lib/ovirt-engine/content /var/lib/ovirt-engine/ deployments /var/tmp/ovirt-engine /var/cache/ovirt-engine 3. Enable the HTTP connector in the engine (the default is to enable only AJP, and that doesn't work without Apache as frontend) adding the following to the /etc/sysconfig/ovirt-engine file: ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false 4. Configure database connection details (the default in development environments is to use the postgres user and the trust mode) adding this to /etc/sysconfig/ovirt-engine: ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm -q postgresql-jdbc) and install it if needed (yum install postgresql-jdbc). 6. Now you can start the engine running the engine-service script: engine-service start Look at the system log (the file /var/log/messages) and the engine logs (the files /var/log/ovirt-engine/server. log and /var/log/ovirt-engine) for errors. 7. Connect to http://localhost:8700 and you should be able to login with user admin and letmein! as password. Note that I am assuming that you already created the database, and that you want to use this installation for development. If you are looking for an production installation I suggest using the RPMs. Also I tested this with the latest source from the repository, it will not work with older versions. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. Any progress here? Yuval, that will not work with 3.1. Please use 3.2 and the following instructions: http://www.ovirt.org/Building_________Engine_Draft <http://www.ovirt.org/Building_______Engine_Draft> <http://www.ovirt.org/__Building_____Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft>> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. _____________________________________________________ Users mailing list Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> http://lists.ovirt.org/______mailman/listinfo/users <http://lists.ovirt.org/____mailman/listinfo/users> <http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users>> <http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users> <http://lists.ovirt.org/__mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

Thank you very much. I now get the welcome page when I enter "http://localhost:8700/". However, when I try to enter the Administrator Portal <http://localhost:8700/webadmin> I get a javax.servlet.ServletException. I attached a screenshot. Inline image 1 How can I troubleshoot this?

I appreciate your help very much Yuval On Fri, Mar 8, 2013 at 8:05 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com>> wrote: On 03/08/2013 07:00 PM, Yuval M wrote: I attached the logs, here is the output from the commands you suggested: Looks like the database schema doesn't match the rest of the code. You probably created the database before switching to branch 3.2. Just drop the database and create it again with the scripts in the 3.2 branch. * * *[root@bufferoverflow bin]# psql -U postgres engine* psql (9.2.3) Type "help" for help. engine=# select count(*) from vdc_options; count ------- 345 (1 row) *[root@bufferoverflow bin]# find /home/wil/ovirt-engine/__installation -name postgresql.jar* *[root@bufferoverflow bin]# find /home/wil/ovirt-engine/__installation -name postg\** /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar.index *[root@bufferoverflow bin]# ls -la /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/* total 12 drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 . drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 postgresql *[root@bufferoverflow bin]# ls -la /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/* total 544 drwxr-xr-x. 2 wil wil 4096 Mar 8 18:46 . drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. -rw-r--r--. 1 wil wil 307 Mar 8 18:03 module.xml -rw-rw-r--. 1 wil wil 539705 Mar 7 16:41 postgresql-jdbc.jar -rw-rw-r--. 1 wil wil 545 Mar 8 18:46 postgresql-jdbc.jar.index I appreciate your help Yuval On Fri, Mar 8, 2013 at 7:44 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: On 03/08/2013 06:38 PM, Yuval M wrote: Thanks, now "./engine-service start" succeeded. /[root@bufferoverflow bin]# ./engine-service start/ /Starting engine-service: [ OK ]/ However, when I try to access "http://localhost:8700" I get an empty page (0 bytes). I see the following errors in /home/wil/ovirt-engine/____installation/var/log/ovirt-____engine/server.log JBAS014777: Services which failed to start: service jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: org.jboss.msc.service.____StartException in service jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: Failed to start service 2013-03-08 19:27:51,495 ERROR [org.jboss.as.server.____deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-2" => {"JBAS014671: Failed services" => {"jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.__jar\__".component.____UsersDomainsCacheManagerServic____e.START" => "org.jboss.msc.service.____StartException in service jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.jar\____".component.____UsersDomainsCacheManagerServic____e.START: Failed to start service"}}}} Here is the contents of my configuration file: [root@bufferoverflow installation]# cat etc/sysconfig/ovirt-engine # # For descriptions of the parameters and their default values look # at the /usr/share/ovirt-engine/conf/____engine.conf.defaults file. # # Please note that the engine installation tool engine-setup will # append the modified parameters to the end of this file. # JAVA_HOME=/usr/lib/jvm/jre-1.____7.0-openjdk.x86_64 JBOSS_HOME=/home/wil/ovirt-____engine/jboss-as-7.1.1.Final ENGINE_USER=wil ENGINE_GROUP=wil ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= ENGINE_DEBUG_ADDRESS=0.0.0.0:____8787 <http://0.0.0.0:8787> <http://0.0.0.0:8787> Thank you very much for your help Can you share the server.log and engine.log files? If possible stop the engine, clean the files, start again and then collect and provide the files. Not sure, but I guess that you are having some problem with the database, so please check the following: 1. Try to connect to the database manually: psql -U postgres engine engine# select count(*) from vdc_options; 2. Make sure that the JDBC driver is in the right place and that it points to the right file if it is a symbolic link: find home/wil/ovirt-engine/____installation -name postgresql.jar Yuval On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> wrote: On 03/08/2013 05:14 PM, Yuval M wrote: checked out to 3.2 branch, now the configuration file was as detailed in the wiki. after configuring it I try to start the engine and get: [wil@bufferoverflow bin]$ pwd /home/wil/ovirt-engine/______installation/bin [wil@bufferoverflow bin]$ ./engine-service start Traceback (most recent call last): File "./engine-service", line 23, in <module> import configobj ImportError: No module named configobj [wil@bufferoverflow bin]$ Ok, this is because the service script needs the python-configobj and python-cheetah packages: yum install python-configobj python-cheetah On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__> wrote: On 03/08/2013 03:51 PM, Juan Hernandez wrote: On 03/08/2013 03:49 PM, Yuval M wrote: OK, brand new machine, Fedora 18 (x64), Trying to install Ovirt 3.2 from sources according to: http://www.ovirt.org/Building___________Engine_Draft <http://www.ovirt.org/Building_________Engine_Draft> <http://www.ovirt.org/__Building_______Engine_Draft <http://www.ovirt.org/Building_______Engine_Draft>> <http://www.ovirt.org/____Building_____Engine_Draft <http://www.ovirt.org/__Building_____Engine_Draft> <http://www.ovirt.org/__Building_____Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft>>> <http://www.ovirt.org/______Building___Engine_Draft <http://www.ovirt.org/____Building___Engine_Draft> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft>> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>>>> <http://www.ovirt.org/________Building_Engine_Draft <http://www.ovirt.org/______Building_Engine_Draft> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>>>> Everything is good up to the following stage: "Now you need to do some adjustments to the configuration file $HOME/ovirt-engine/________installation/etc/sysconfig/________ovirt-engine" The "sysconfig" directory does not exist. so does the "ovirt-engine" configuration file (searched through the $HOME/ovirt-engine tree). I didn't find any code in the Makefile ($HOME/ovirt-engine/________repository/Makefile) that would create them, What am I missing? This has changed recently and I didn't update that wiki page. The /etc/sysconig/ovirt-engine file has been replaced by /etc/ovirt-engine/engine.conf. But wait, this change was made in the master branch, not in 3.2, so it shouldn't be a problem. Are you sure you are using the engine_3.2 branch? Thanks, Yuval On Tue, Feb 26, 2013 at 3:25 PM, Juan Hernandez <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__>__> wrote: On 02/26/2013 02:19 PM, Doron Fediuck wrote: ----- Original Message ----- From: "Yuval M" <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>>>>>> To: "Juan Hernandez" <jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__>__>__, users(a)ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>> <mailto:users@ovirt.org <mailto:users@ovirt.org> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>>> Cc: "Limor Gavish" <lgavish(a)gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>>>> Sent: Sunday, February 24, 2013 11:38:12 PM Subject: Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop." Still having trouble with the build process (Ovirt 3.1): $ sudo make ... (success) ... $ sudo make install ... inflating: /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/______META-__INF/maven/__org.__ovirt.____engine.ui/______webadmin/pom.xml inflating: /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/____404.____html checkdir error: /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar exists but is not directory unable to process engine-bll.jar/org/ovirt/__________engine/core/bll/VdsDeploy$__32.________class. checkdir error: /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar exists but is not directory unable to process engine-bll.jar/org/ovirt/__________engine/core/bll/__________InitBackendServicesOnStartupBe__________an.class. ... make: *** [install_artifacts] Error 2 any insights? Thanks... On Thu, Jan 24, 2013 at 8:52 PM, Juan Hernandez < jhernand(a)redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>>>__> wrote: On 01/24/2013 04:20 PM, Yuval M wrote: Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- config_.26_engine-manage- domains and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Those instructions are out of date, use "make install". That installs the files, but you will still need some changes to make the engine work: 1. Create the ovirt user (the engine runs by default with this service, unless you change the /etc/syscofig/ovirt-engine file and add the ENGINE_USER and ENGINE_GROUP parameters): useradd ovirt 2. Create (mkdir -p ...) and change the ownership of the directories that the engine needs to own to ovirt:ovirt (chown ovirt:ovirt ...): /etc/ovirt-engine /var/log/ovirt-engine /var/lock/ovirt-engine /var/lib/ovirt-engine/content /var/lib/ovirt-engine/ deployments /var/tmp/ovirt-engine /var/cache/ovirt-engine 3. Enable the HTTP connector in the engine (the default is to enable only AJP, and that doesn't work without Apache as frontend) adding the following to the /etc/sysconfig/ovirt-engine file: ENGINE_PROXY_ENABLED=false ENGINE_HTTP_ENABLED=true ENGINE_HTTP_PORT=8700 ENGINE_HTTPS_ENABLED=false ENGINE_AJP_ENABLED=false 4. Configure database connection details (the default in development environments is to use the postgres user and the trust mode) adding this to /etc/sysconfig/ovirt-engine: ENGINE_DB_USER=postgres ENGINE_DB_PASSWORD= 5. Make sure that you have the PostgreSQL JDBC driver installed (rpm -q postgresql-jdbc) and install it if needed (yum install postgresql-jdbc). 6. Now you can start the engine running the engine-service script: engine-service start Look at the system log (the file /var/log/messages) and the engine logs (the files /var/log/ovirt-engine/server. log and /var/log/ovirt-engine) for errors. 7. Connect to http://localhost:8700 and you should be able to login with user admin and letmein! as password. Note that I am assuming that you already created the database, and that you want to use this installation for development. If you are looking for an production installation I suggest using the RPMs. Also I tested this with the latest source from the repository, it will not work with older versions. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. Any progress here? Yuval, that will not work with 3.1. Please use 3.2 and the following instructions: http://www.ovirt.org/Building___________Engine_Draft <http://www.ovirt.org/Building_________Engine_Draft> <http://www.ovirt.org/__Building_______Engine_Draft <http://www.ovirt.org/Building_______Engine_Draft>> <http://www.ovirt.org/____Building_____Engine_Draft <http://www.ovirt.org/__Building_____Engine_Draft> <http://www.ovirt.org/__Building_____Engine_Draft <http://www.ovirt.org/Building_____Engine_Draft>>> <http://www.ovirt.org/______Building___Engine_Draft <http://www.ovirt.org/____Building___Engine_Draft> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft>> <http://www.ovirt.org/____Building___Engine_Draft <http://www.ovirt.org/__Building___Engine_Draft> <http://www.ovirt.org/__Building___Engine_Draft <http://www.ovirt.org/Building___Engine_Draft>>>> <http://www.ovirt.org/________Building_Engine_Draft <http://www.ovirt.org/______Building_Engine_Draft> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>>> <http://www.ovirt.org/______Building_Engine_Draft <http://www.ovirt.org/____Building_Engine_Draft> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft>> <http://www.ovirt.org/____Building_Engine_Draft <http://www.ovirt.org/__Building_Engine_Draft> <http://www.ovirt.org/__Building_Engine_Draft <http://www.ovirt.org/Building_Engine_Draft>>>>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. _______________________________________________________ Users mailing list Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> http://lists.ovirt.org/________mailman/listinfo/users <http://lists.ovirt.org/______mailman/listinfo/users> <http://lists.ovirt.org/______mailman/listinfo/users <http://lists.ovirt.org/____mailman/listinfo/users>> <http://lists.ovirt.org/______mailman/listinfo/users <http://lists.ovirt.org/____mailman/listinfo/users> <http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users>>> <http://lists.ovirt.org/______mailman/listinfo/users <http://lists.ovirt.org/____mailman/listinfo/users> <http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users>> <http://lists.ovirt.org/____mailman/listinfo/users <http://lists.ovirt.org/__mailman/listinfo/users> <http://lists.ovirt.org/__mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>>>> -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.