3:48 a.m.
Hi ,
I'm trying to create Logical Network and assign it to cluster & want to
bond this to one of the Network Interface on Host. so that i can isolate my
VM from other networks.
The issue is even if i set Cluster while creating Logical Network, it is
not setting the cluster. In Web Admin it is in unset state.
Also, let me know how do i bind this Logical network on Host Interface.
*Java code:*
Network nw1=new Network();
VLAN vlan = new VLAN();
vlan.setId(2000);
nw1.setVlan(vlan);
IP ip = new IP();
ip.setAddress("192.168.1.151");
ip.setGateway("192.168.1.1");
ip.setNetmask("255.255.255.0");
nw1.setIp(ip);
nw1.setName("apiNetwork");
nw1.setDataCenter(api.getDataCenters().get("testDC"));
nw1.setCluster(api.getClusters().get("testCluster"));
org.ovirt.engine.sdk.decorators.Network nw2 =
api.getNetworks().add(nw1);
--
Thanks & Regards
Tejesh
4:42 p.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Thursday, February 20, 2014 11:48:56 AM
Subject: [Users] Creating Logical Network issue - API
Hi ,
I'm trying to create Logical Network and assign it to cluster & want to bond
this to one of the Network Interface on Host. so that i can isolate my VM
from other networks.
The issue is even if i set Cluster while creating Logical Network, it is not
setting the cluster. In Web Admin it is in unset state.
Also, let me know how do i bind this Logical network on Host Interface.
Java code:
Network nw1=new Network();
VLAN vlan = new VLAN();
vlan.setId(2000);
nw1.setVlan(vlan);
IP ip = new IP();
ip.setAddress("192.168.1.151");
ip.setGateway("192.168.1.1");
ip.setNetmask("255.255.255.0");
nw1.setIp(ip);
nw1.setName("apiNetwork");
nw1.setDataCenter(api.getDataCenters().get("testDC"));
nw1.setCluster(api.getClusters().get("testCluster"));
org.ovirt.engine.sdk.decorators.Network nw2 = api.getNetworks().add(nw1);
This part will only add the network in the data-center.
In order to attach it to a cluster, there is a need for a specific action:
api.getClusters().get("testCluster").getNetworks().add(nw2);
--
Thanks & Regards
Tejesh
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:07 a.m.
h
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Thursday, February 20, 2014 11:48:56 AM
Subject: [Users] Creating Logical Network issue - API
Hi ,
I'm trying to create Logical Network and assign it to cluster & want to bond
this to one of the Network Interface on Host. so that i can isolate my VM
from other networks.
The issue is even if i set Cluster while creating Logical Network, it is not
setting the cluster. In Web Admin it is in unset state.
Also, let me know how do i bind this Logical network on Host Interface.
Java code:
Network nw1=new Network();
VLAN vlan = new VLAN();
vlan.setId(2000);
nw1.setVlan(vlan);
IP ip = new IP();
ip.setAddress("192.168.1.151");
ip.setGateway("192.168.1.1");
ip.setNetmask("255.255.255.0");
Note that the stated IP above will not be used to set the address on the host itself.
In order to do so you should use either the 'setup networks' api on host's
nics level.
(Alternately, you can send POST request to /hosts/{host:id}/nics which utilize the
former api (it is a bit simpler than using the setup networks api).
Should look like:
Host host = api.getHosts().get("host_name");
Action action = new Action();
action.setCheckConnectivity(true); //required for rollback in case of configuration
failure
action.setHostNics(...); // should contain the target configuration
host.getHostNics().setupnetworks(action);
where the action should contain the entire desired network configuration.
You can find various python-sdk example for setup networks on my blog [1]
I'll post few examples using the java sdk earlier next week.
[1] https://motiasayag.wordpress.com/
nw1.setIp(ip);
nw1.setName("apiNetwork");
nw1.setDataCenter(api.getDataCenters().get("testDC"));
nw1.setCluster(api.getClusters().get("testCluster"));
org.ovirt.engine.sdk.decorators.Network nw2 = api.getNetworks().add(nw1);
--
Thanks & Regards
Tejesh
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:29 a.m.
Thanks, can you post sample on Assigning Multiple Logical Network to
Physical Network in Java?
I have create the Logical Network and attached to Cluster. Now i want to
Assign or Map this to Physical Network?
Also, How to Bond Two Physical NICs and Map or Assign Multiple Logical
Networks.
On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com> wrote:
h
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Thursday, February 20, 2014 11:48:56 AM
> Subject: [Users] Creating Logical Network issue - API
>
> Hi ,
>
> I'm trying to create Logical Network and assign it to cluster & want to
bond
> this to one of the Network Interface on Host. so that i can isolate my VM
> from other networks.
>
> The issue is even if i set Cluster while creating Logical Network, it is
not
> setting the cluster. In Web Admin it is in unset state.
>
> Also, let me know how do i bind this Logical network on Host Interface.
>
> Java code:
>
> Network nw1=new Network();
> VLAN vlan = new VLAN();
> vlan.setId(2000);
> nw1.setVlan(vlan);
> IP ip = new IP();
> ip.setAddress("192.168.1.151");
> ip.setGateway("192.168.1.1");
> ip.setNetmask("255.255.255.0");
Note that the stated IP above will not be used to set the address on the
host itself.
In order to do so you should use either the 'setup networks' api on host's
nics level.
(Alternately, you can send POST request to /hosts/{host:id}/nics which
utilize the
former api (it is a bit simpler than using the setup networks api).
Should look like:
Host host = api.getHosts().get("host_name");
Action action = new Action();
action.setCheckConnectivity(true); //required for rollback in case of
configuration failure
action.setHostNics(...); // should contain the target configuration
host.getHostNics().setupnetworks(action);
where the action should contain the entire desired network configuration.
You can find various python-sdk example for setup networks on my blog [1]
I'll post few examples using the java sdk earlier next week.
[1] https://motiasayag.wordpress.com/
> nw1.setIp(ip);
> nw1.setName("apiNetwork");
>
> nw1.setDataCenter(api.getDataCenters().get("testDC"));
> nw1.setCluster(api.getClusters().get("testCluster"));
>
> org.ovirt.engine.sdk.decorators.Network nw2 = api.getNetworks().add(nw1);
>
> --
> Thanks & Regards
> Tejesh
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Thanks & Regards
Tejesh
3 a.m.
Can you tel me how do i assign Logical Network(s) to one of the Physical
Nic on the Host.
On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com> wrote:
h
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Thursday, February 20, 2014 11:48:56 AM
> Subject: [Users] Creating Logical Network issue - API
>
> Hi ,
>
> I'm trying to create Logical Network and assign it to cluster & want to
bond
> this to one of the Network Interface on Host. so that i can isolate my VM
> from other networks.
>
> The issue is even if i set Cluster while creating Logical Network, it is
not
> setting the cluster. In Web Admin it is in unset state.
>
> Also, let me know how do i bind this Logical network on Host Interface.
>
> Java code:
>
> Network nw1=new Network();
> VLAN vlan = new VLAN();
> vlan.setId(2000);
> nw1.setVlan(vlan);
> IP ip = new IP();
> ip.setAddress("192.168.1.151");
> ip.setGateway("192.168.1.1");
> ip.setNetmask("255.255.255.0");
Note that the stated IP above will not be used to set the address on the
host itself.
In order to do so you should use either the 'setup networks' api on host's
nics level.
(Alternately, you can send POST request to /hosts/{host:id}/nics which
utilize the
former api (it is a bit simpler than using the setup networks api).
Should look like:
Host host = api.getHosts().get("host_name");
Action action = new Action();
action.setCheckConnectivity(true); //required for rollback in case of
configuration failure
action.setHostNics(...); // should contain the target configuration
host.getHostNics().setupnetworks(action);
where the action should contain the entire desired network configuration.
You can find various python-sdk example for setup networks on my blog [1]
I'll post few examples using the java sdk earlier next week.
[1] https://motiasayag.wordpress.com/
> nw1.setIp(ip);
> nw1.setName("apiNetwork");
>
> nw1.setDataCenter(api.getDataCenters().get("testDC"));
> nw1.setCluster(api.getClusters().get("testCluster"));
>
> org.ovirt.engine.sdk.decorators.Network nw2 = api.getNetworks().add(nw1);
>
> --
> Thanks & Regards
> Tejesh
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Thanks & Regards
Tejesh
3:59 a.m.
While setting Logical Network, it fails with below error:
code : 400
reason: Bad Request
detail: Previous network name is required.
Code:
String nw_name="ApiNetWork";
org.ovirt.engine.sdk.decorators.Host hst =
api.getHosts().get("rhevhost");
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
hst.getHostNics().get("eth1").update();
On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com> wrote:
Can you tel me how do i assign Logical Network(s) to one of the
Physical
Nic on the Host.
On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com> wrote:
> h
>
> ----- Original Message -----
> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > Subject: [Users] Creating Logical Network issue - API
> >
> > Hi ,
> >
> > I'm trying to create Logical Network and assign it to cluster & want to
> bond
> > this to one of the Network Interface on Host. so that i can isolate my
> VM
> > from other networks.
> >
> > The issue is even if i set Cluster while creating Logical Network, it
> is not
> > setting the cluster. In Web Admin it is in unset state.
> >
> > Also, let me know how do i bind this Logical network on Host Interface.
> >
> > Java code:
> >
> > Network nw1=new Network();
> > VLAN vlan = new VLAN();
> > vlan.setId(2000);
> > nw1.setVlan(vlan);
> > IP ip = new IP();
> > ip.setAddress("192.168.1.151");
> > ip.setGateway("192.168.1.1");
> > ip.setNetmask("255.255.255.0");
>
> Note that the stated IP above will not be used to set the address on the
> host itself.
> In order to do so you should use either the 'setup networks' api on
> host's nics level.
> (Alternately, you can send POST request to /hosts/{host:id}/nics which
> utilize the
> former api (it is a bit simpler than using the setup networks api).
>
> Should look like:
> Host host = api.getHosts().get("host_name");
> Action action = new Action();
> action.setCheckConnectivity(true); //required for rollback in case of
> configuration failure
> action.setHostNics(...); // should contain the target configuration
> host.getHostNics().setupnetworks(action);
>
> where the action should contain the entire desired network configuration.
>
> You can find various python-sdk example for setup networks on my blog [1]
> I'll post few examples using the java sdk earlier next week.
>
> [1] https://motiasayag.wordpress.com/
>
> > nw1.setIp(ip);
> > nw1.setName("apiNetwork");
> >
> > nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > nw1.setCluster(api.getClusters().get("testCluster"));
> >
> > org.ovirt.engine.sdk.decorators.Network nw2 =
> api.getNetworks().add(nw1);
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
--
Thanks & Regards
Tejesh
--
Thanks & Regards
Tejesh
4:41 a.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "Moti Asayag" <masayag(a)redhat.com>
Cc: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Monday, February 24, 2014 11:59:42 AM
Subject: Re: [Users] Creating Logical Network issue - API
While setting Logical Network, it fails with below error:
code : 400
reason: Bad Request
detail: Previous network name is required.
See an example in the following post:
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
Code:
String nw_name="ApiNetWork";
org.ovirt.engine.sdk.decorators.Host hst =
api.getHosts().get("rhevhost");
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
hst.getHostNics().get("eth1").update();
On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com> wrote:
> Can you tel me how do i assign Logical Network(s) to one of the Physical
> Nic on the Host.
>
>
> On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
>> h
>>
>> ----- Original Message -----
>> > From: "Tejesh M" <tejeshmk(a)gmail.com>
>> > To: "users(a)oVirt.org" <users(a)ovirt.org>
>> > Sent: Thursday, February 20, 2014 11:48:56 AM
>> > Subject: [Users] Creating Logical Network issue - API
>> >
>> > Hi ,
>> >
>> > I'm trying to create Logical Network and assign it to cluster &
want to
>> bond
>> > this to one of the Network Interface on Host. so that i can isolate my
>> VM
>> > from other networks.
>> >
>> > The issue is even if i set Cluster while creating Logical Network, it
>> is not
>> > setting the cluster. In Web Admin it is in unset state.
>> >
>> > Also, let me know how do i bind this Logical network on Host Interface.
>> >
>> > Java code:
>> >
>> > Network nw1=new Network();
>> > VLAN vlan = new VLAN();
>> > vlan.setId(2000);
>> > nw1.setVlan(vlan);
>> > IP ip = new IP();
>> > ip.setAddress("192.168.1.151");
>> > ip.setGateway("192.168.1.1");
>> > ip.setNetmask("255.255.255.0");
>>
>> Note that the stated IP above will not be used to set the address on the
>> host itself.
>> In order to do so you should use either the 'setup networks' api on
>> host's nics level.
>> (Alternately, you can send POST request to /hosts/{host:id}/nics which
>> utilize the
>> former api (it is a bit simpler than using the setup networks api).
>>
>> Should look like:
>> Host host = api.getHosts().get("host_name");
>> Action action = new Action();
>> action.setCheckConnectivity(true); //required for rollback in case of
>> configuration failure
>> action.setHostNics(...); // should contain the target configuration
>> host.getHostNics().setupnetworks(action);
>>
>> where the action should contain the entire desired network configuration.
>>
>> You can find various python-sdk example for setup networks on my blog [1]
>> I'll post few examples using the java sdk earlier next week.
>>
>> [1] https://motiasayag.wordpress.com/
>>
>> > nw1.setIp(ip);
>> > nw1.setName("apiNetwork");
>> >
>> > nw1.setDataCenter(api.getDataCenters().get("testDC"));
>> > nw1.setCluster(api.getClusters().get("testCluster"));
>> >
>> > org.ovirt.engine.sdk.decorators.Network nw2 =
>> api.getNetworks().add(nw1);
>> >
>> > --
>> > Thanks & Regards
>> > Tejesh
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users(a)ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>>
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
5:18 a.m.
The example updates the existing Network (i.e. if the Logical Network is
already mapped to eth1). But what i'm looking for is how to map Logical
Network "ApiNetWork" to "eth1", please refer screenshot.
On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "Moti Asayag" <masayag(a)redhat.com>
> Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Monday, February 24, 2014 11:59:42 AM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> While setting Logical Network, it fails with below error:
> code : 400
> reason: Bad Request
> detail: Previous network name is required.
See an example in the following post:
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
>
> Code:
> String nw_name="ApiNetWork";
> org.ovirt.engine.sdk.decorators.Host hst =
> api.getHosts().get("rhevhost");
>
> hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> //hst.getHostNics().get("eth1").setCheckConnectivity(true);
> //hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> hst.getHostNics().get("eth1").update();
>
>
>
> On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com> wrote:
>
> > Can you tel me how do i assign Logical Network(s) to one of the
Physical
> > Nic on the Host.
> >
> >
> > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com>
wrote:
> >
> >> h
> >>
> >> ----- Original Message -----
> >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> >> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> >> > Subject: [Users] Creating Logical Network issue - API
> >> >
> >> > Hi ,
> >> >
> >> > I'm trying to create Logical Network and assign it to cluster
&
want to
> >> bond
> >> > this to one of the Network Interface on Host. so that i can isolate
my
> >> VM
> >> > from other networks.
> >> >
> >> > The issue is even if i set Cluster while creating Logical Network,
it
> >> is not
> >> > setting the cluster. In Web Admin it is in unset state.
> >> >
> >> > Also, let me know how do i bind this Logical network on Host
Interface.
> >> >
> >> > Java code:
> >> >
> >> > Network nw1=new Network();
> >> > VLAN vlan = new VLAN();
> >> > vlan.setId(2000);
> >> > nw1.setVlan(vlan);
> >> > IP ip = new IP();
> >> > ip.setAddress("192.168.1.151");
> >> > ip.setGateway("192.168.1.1");
> >> > ip.setNetmask("255.255.255.0");
> >>
> >> Note that the stated IP above will not be used to set the address on
the
> >> host itself.
> >> In order to do so you should use either the 'setup networks' api
on
> >> host's nics level.
> >> (Alternately, you can send POST request to /hosts/{host:id}/nics which
> >> utilize the
> >> former api (it is a bit simpler than using the setup networks api).
> >>
> >> Should look like:
> >> Host host = api.getHosts().get("host_name");
> >> Action action = new Action();
> >> action.setCheckConnectivity(true); //required for rollback in
case of
> >> configuration failure
> >> action.setHostNics(...); // should contain the target
configuration
> >> host.getHostNics().setupnetworks(action);
> >>
> >> where the action should contain the entire desired network
configuration.
> >>
> >> You can find various python-sdk example for setup networks on my blog
[1]
> >> I'll post few examples using the java sdk earlier next week.
> >>
> >> [1] https://motiasayag.wordpress.com/
> >>
> >> > nw1.setIp(ip);
> >> > nw1.setName("apiNetwork");
> >> >
> >> > nw1.setDataCenter(api.getDataCenters().get("testDC"));
> >> > nw1.setCluster(api.getClusters().get("testCluster"));
> >> >
> >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> >> api.getNetworks().add(nw1);
> >> >
> >> > --
> >> > Thanks & Regards
> >> > Tejesh
> >> >
> >> > _______________________________________________
> >> > Users mailing list
> >> > Users(a)ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/users
> >> >
> >>
> >
> >
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
5:53 a.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "Moti Asayag" <masayag(a)redhat.com>
Cc: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Monday, February 24, 2014 1:18:53 PM
Subject: Re: [Users] Creating Logical Network issue - API
The example updates the existing Network (i.e. if the Logical Network is
already mapped to eth1). But what i'm looking for is how to map Logical
Network "ApiNetWork" to "eth1", please refer screenshot.
Please check the last example named "AddNetworkToNic" from
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
It should achieve what you're aiming for.
On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
> ----- Original Message -----
> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > To: "Moti Asayag" <masayag(a)redhat.com>
> > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > Sent: Monday, February 24, 2014 11:59:42 AM
> > Subject: Re: [Users] Creating Logical Network issue - API
> >
> > While setting Logical Network, it fails with below error:
> > code : 400
> > reason: Bad Request
> > detail: Previous network name is required.
>
> See an example in the following post:
>
>
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
>
> >
> > Code:
> > String nw_name="ApiNetWork";
> > org.ovirt.engine.sdk.decorators.Host hst =
> > api.getHosts().get("rhevhost");
> >
> >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> >
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > hst.getHostNics().get("eth1").update();
> >
> >
> >
> > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com> wrote:
> >
> > > Can you tel me how do i assign Logical Network(s) to one of the
> Physical
> > > Nic on the Host.
> > >
> > >
> > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com>
> wrote:
> > >
> > >> h
> > >>
> > >> ----- Original Message -----
> > >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > >> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > >> > Subject: [Users] Creating Logical Network issue - API
> > >> >
> > >> > Hi ,
> > >> >
> > >> > I'm trying to create Logical Network and assign it to cluster
&
> want to
> > >> bond
> > >> > this to one of the Network Interface on Host. so that i can
isolate
> my
> > >> VM
> > >> > from other networks.
> > >> >
> > >> > The issue is even if i set Cluster while creating Logical
Network,
> it
> > >> is not
> > >> > setting the cluster. In Web Admin it is in unset state.
> > >> >
> > >> > Also, let me know how do i bind this Logical network on Host
> Interface.
> > >> >
> > >> > Java code:
> > >> >
> > >> > Network nw1=new Network();
> > >> > VLAN vlan = new VLAN();
> > >> > vlan.setId(2000);
> > >> > nw1.setVlan(vlan);
> > >> > IP ip = new IP();
> > >> > ip.setAddress("192.168.1.151");
> > >> > ip.setGateway("192.168.1.1");
> > >> > ip.setNetmask("255.255.255.0");
> > >>
> > >> Note that the stated IP above will not be used to set the address on
> the
> > >> host itself.
> > >> In order to do so you should use either the 'setup networks'
api on
> > >> host's nics level.
> > >> (Alternately, you can send POST request to /hosts/{host:id}/nics
which
> > >> utilize the
> > >> former api (it is a bit simpler than using the setup networks api).
> > >>
> > >> Should look like:
> > >> Host host = api.getHosts().get("host_name");
> > >> Action action = new Action();
> > >> action.setCheckConnectivity(true); //required for rollback in
> case of
> > >> configuration failure
> > >> action.setHostNics(...); // should contain the target
> configuration
> > >> host.getHostNics().setupnetworks(action);
> > >>
> > >> where the action should contain the entire desired network
> configuration.
> > >>
> > >> You can find various python-sdk example for setup networks on my blog
> [1]
> > >> I'll post few examples using the java sdk earlier next week.
> > >>
> > >> [1] https://motiasayag.wordpress.com/
> > >>
> > >> > nw1.setIp(ip);
> > >> > nw1.setName("apiNetwork");
> > >> >
> > >> > nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > >> > nw1.setCluster(api.getClusters().get("testCluster"));
> > >> >
> > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > >> api.getNetworks().add(nw1);
> > >> >
> > >> > --
> > >> > Thanks & Regards
> > >> > Tejesh
> > >> >
> > >> > _______________________________________________
> > >> > Users mailing list
> > >> > Users(a)ovirt.org
> > >> > http://lists.ovirt.org/mailman/listinfo/users
> > >> >
> > >>
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
> >
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
>
--
Thanks & Regards
Tejesh
6:48 a.m.
Thanks alot.. Will try and let you know the feedback.
On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com> wrote:
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "Moti Asayag" <masayag(a)redhat.com>
> Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Monday, February 24, 2014 1:18:53 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> The example updates the existing Network (i.e. if the Logical Network is
> already mapped to eth1). But what i'm looking for is how to map Logical
> Network "ApiNetWork" to "eth1", please refer screenshot.
>
Please check the last example named "AddNetworkToNic" from
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
It should achieve what you're aiming for.
>
> On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
> > ----- Original Message -----
> > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > Subject: Re: [Users] Creating Logical Network issue - API
> > >
> > > While setting Logical Network, it fails with below error:
> > > code : 400
> > > reason: Bad Request
> > > detail: Previous network name is required.
> >
> > See an example in the following post:
> >
> >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> >
> > >
> > > Code:
> > > String nw_name="ApiNetWork";
> > > org.ovirt.engine.sdk.decorators.Host hst =
> > > api.getHosts().get("rhevhost");
> > >
> > >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > >
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > hst.getHostNics().get("eth1").update();
> > >
> > >
> > >
> > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com>
wrote:
> > >
> > > > Can you tel me how do i assign Logical Network(s) to one of the
> > Physical
> > > > Nic on the Host.
> > > >
> > > >
> > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag
<masayag(a)redhat.com>
> > wrote:
> > > >
> > > >> h
> > > >>
> > > >> ----- Original Message -----
> > > >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > >> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> > > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > > >> > Subject: [Users] Creating Logical Network issue - API
> > > >> >
> > > >> > Hi ,
> > > >> >
> > > >> > I'm trying to create Logical Network and assign it to
cluster &
> > want to
> > > >> bond
> > > >> > this to one of the Network Interface on Host. so that i can
isolate
> > my
> > > >> VM
> > > >> > from other networks.
> > > >> >
> > > >> > The issue is even if i set Cluster while creating Logical
Network,
> > it
> > > >> is not
> > > >> > setting the cluster. In Web Admin it is in unset state.
> > > >> >
> > > >> > Also, let me know how do i bind this Logical network on
Host
> > Interface.
> > > >> >
> > > >> > Java code:
> > > >> >
> > > >> > Network nw1=new Network();
> > > >> > VLAN vlan = new VLAN();
> > > >> > vlan.setId(2000);
> > > >> > nw1.setVlan(vlan);
> > > >> > IP ip = new IP();
> > > >> > ip.setAddress("192.168.1.151");
> > > >> > ip.setGateway("192.168.1.1");
> > > >> > ip.setNetmask("255.255.255.0");
> > > >>
> > > >> Note that the stated IP above will not be used to set the
address
on
> > the
> > > >> host itself.
> > > >> In order to do so you should use either the 'setup
networks' api
on
> > > >> host's nics level.
> > > >> (Alternately, you can send POST request to /hosts/{host:id}/nics
which
> > > >> utilize the
> > > >> former api (it is a bit simpler than using the setup networks
api).
> > > >>
> > > >> Should look like:
> > > >> Host host = api.getHosts().get("host_name");
> > > >> Action action = new Action();
> > > >> action.setCheckConnectivity(true); //required for rollback
in
> > case of
> > > >> configuration failure
> > > >> action.setHostNics(...); // should contain the target
> > configuration
> > > >> host.getHostNics().setupnetworks(action);
> > > >>
> > > >> where the action should contain the entire desired network
> > configuration.
> > > >>
> > > >> You can find various python-sdk example for setup networks on my
blog
> > [1]
> > > >> I'll post few examples using the java sdk earlier next week.
> > > >>
> > > >> [1] https://motiasayag.wordpress.com/
> > > >>
> > > >> > nw1.setIp(ip);
> > > >> > nw1.setName("apiNetwork");
> > > >> >
> > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > >> >
> > > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > > >> api.getNetworks().add(nw1);
> > > >> >
> > > >> > --
> > > >> > Thanks & Regards
> > > >> > Tejesh
> > > >> >
> > > >> > _______________________________________________
> > > >> > Users mailing list
> > > >> > Users(a)ovirt.org
> > > >> > http://lists.ovirt.org/mailman/listinfo/users
> > > >> >
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > Thanks & Regards
> > > > Tejesh
> > > >
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
7:46 a.m.
Thanks, I'm able to create logical network & attached the same to host.
Now I tried to change the network for a VM nic from rhevm to VLAN1189, but
it is not working. any suggestion?
api.getVMs().get(vmName).getNics().get("nic1").setNetwork(api.getNetworks().get("VLAN1189"));
api.getVMs().get(vmName).getNics().get("nic1").update();
On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com> wrote:
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "Moti Asayag" <masayag(a)redhat.com>
> Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Monday, February 24, 2014 1:18:53 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> The example updates the existing Network (i.e. if the Logical Network is
> already mapped to eth1). But what i'm looking for is how to map Logical
> Network "ApiNetWork" to "eth1", please refer screenshot.
>
Please check the last example named "AddNetworkToNic" from
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
It should achieve what you're aiming for.
>
> On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
> > ----- Original Message -----
> > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > Subject: Re: [Users] Creating Logical Network issue - API
> > >
> > > While setting Logical Network, it fails with below error:
> > > code : 400
> > > reason: Bad Request
> > > detail: Previous network name is required.
> >
> > See an example in the following post:
> >
> >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> >
> > >
> > > Code:
> > > String nw_name="ApiNetWork";
> > > org.ovirt.engine.sdk.decorators.Host hst =
> > > api.getHosts().get("rhevhost");
> > >
> > >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > >
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > hst.getHostNics().get("eth1").update();
> > >
> > >
> > >
> > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com>
wrote:
> > >
> > > > Can you tel me how do i assign Logical Network(s) to one of the
> > Physical
> > > > Nic on the Host.
> > > >
> > > >
> > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag
<masayag(a)redhat.com>
> > wrote:
> > > >
> > > >> h
> > > >>
> > > >> ----- Original Message -----
> > > >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > >> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> > > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > > >> > Subject: [Users] Creating Logical Network issue - API
> > > >> >
> > > >> > Hi ,
> > > >> >
> > > >> > I'm trying to create Logical Network and assign it to
cluster &
> > want to
> > > >> bond
> > > >> > this to one of the Network Interface on Host. so that i can
isolate
> > my
> > > >> VM
> > > >> > from other networks.
> > > >> >
> > > >> > The issue is even if i set Cluster while creating Logical
Network,
> > it
> > > >> is not
> > > >> > setting the cluster. In Web Admin it is in unset state.
> > > >> >
> > > >> > Also, let me know how do i bind this Logical network on
Host
> > Interface.
> > > >> >
> > > >> > Java code:
> > > >> >
> > > >> > Network nw1=new Network();
> > > >> > VLAN vlan = new VLAN();
> > > >> > vlan.setId(2000);
> > > >> > nw1.setVlan(vlan);
> > > >> > IP ip = new IP();
> > > >> > ip.setAddress("192.168.1.151");
> > > >> > ip.setGateway("192.168.1.1");
> > > >> > ip.setNetmask("255.255.255.0");
> > > >>
> > > >> Note that the stated IP above will not be used to set the
address
on
> > the
> > > >> host itself.
> > > >> In order to do so you should use either the 'setup
networks' api
on
> > > >> host's nics level.
> > > >> (Alternately, you can send POST request to /hosts/{host:id}/nics
which
> > > >> utilize the
> > > >> former api (it is a bit simpler than using the setup networks
api).
> > > >>
> > > >> Should look like:
> > > >> Host host = api.getHosts().get("host_name");
> > > >> Action action = new Action();
> > > >> action.setCheckConnectivity(true); //required for rollback
in
> > case of
> > > >> configuration failure
> > > >> action.setHostNics(...); // should contain the target
> > configuration
> > > >> host.getHostNics().setupnetworks(action);
> > > >>
> > > >> where the action should contain the entire desired network
> > configuration.
> > > >>
> > > >> You can find various python-sdk example for setup networks on my
blog
> > [1]
> > > >> I'll post few examples using the java sdk earlier next week.
> > > >>
> > > >> [1] https://motiasayag.wordpress.com/
> > > >>
> > > >> > nw1.setIp(ip);
> > > >> > nw1.setName("apiNetwork");
> > > >> >
> > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > >> >
> > > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > > >> api.getNetworks().add(nw1);
> > > >> >
> > > >> > --
> > > >> > Thanks & Regards
> > > >> > Tejesh
> > > >> >
> > > >> > _______________________________________________
> > > >> > Users mailing list
> > > >> > Users(a)ovirt.org
> > > >> > http://lists.ovirt.org/mailman/listinfo/users
> > > >> >
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > Thanks & Regards
> > > > Tejesh
> > > >
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
8:04 a.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "Moti Asayag" <masayag(a)redhat.com>
Cc: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Monday, March 3, 2014 3:46:14 PM
Subject: Re: [Users] Creating Logical Network issue - API
Thanks, I'm able to create logical network & attached the same to host.
Now I tried to change the network for a VM nic from rhevm to VLAN1189, but
it is not working. any suggestion?
api.getVMs().get(vmName).getNics().get("nic1").setNetwork(api.getNetworks().get("VLAN1189"));
api.getVMs().get(vmName).getNics().get("nic1").update();
This snippet is wrong: You attempt to modify a newly fetched
vnic than the one that was just modified in the first line.
I'd try:
VMNIC vnic = api.getVMs().get(vmName).getNics().get("nic1");
vnic.setNetwork(api.getNetworks().get("VLAN1189"));
vnic.update();
If this doesn't work - keep reading :-)
There has been a recent bug in this regards [1].
You can by pass it by nullifying the vnic-profile value until getting the
next stable version (or using the 3.4 rc build).
You can read more about the vnic profile and see python examples here [2]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1047887
Bug 1047887 - Update vnic_profile fails for VM vnic
[2] https://motiasayag.wordpress.com/2014/02/02/vnic-profiles/
On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
>
> ----- Original Message -----
> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > To: "Moti Asayag" <masayag(a)redhat.com>
> > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > Sent: Monday, February 24, 2014 1:18:53 PM
> > Subject: Re: [Users] Creating Logical Network issue - API
> >
> > The example updates the existing Network (i.e. if the Logical Network is
> > already mapped to eth1). But what i'm looking for is how to map Logical
> > Network "ApiNetWork" to "eth1", please refer screenshot.
> >
>
> Please check the last example named "AddNetworkToNic" from
>
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
>
> It should achieve what you're aiming for.
>
> >
> > On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
> >
> > > ----- Original Message -----
> > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > > Subject: Re: [Users] Creating Logical Network issue - API
> > > >
> > > > While setting Logical Network, it fails with below error:
> > > > code : 400
> > > > reason: Bad Request
> > > > detail: Previous network name is required.
> > >
> > > See an example in the following post:
> > >
> > >
> > >
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > >
> > > >
> > > > Code:
> > > > String nw_name="ApiNetWork";
> > > > org.ovirt.engine.sdk.decorators.Host hst =
> > > > api.getHosts().get("rhevhost");
> > > >
> > > >
> hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > > >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > > >
> //hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > > hst.getHostNics().get("eth1").update();
> > > >
> > > >
> > > >
> > > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com>
> wrote:
> > > >
> > > > > Can you tel me how do i assign Logical Network(s) to one of the
> > > Physical
> > > > > Nic on the Host.
> > > > >
> > > > >
> > > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag
<masayag(a)redhat.com>
> > > wrote:
> > > > >
> > > > >> h
> > > > >>
> > > > >> ----- Original Message -----
> > > > >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > >> > To: "users(a)oVirt.org"
<users(a)ovirt.org>
> > > > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > > > >> > Subject: [Users] Creating Logical Network issue - API
> > > > >> >
> > > > >> > Hi ,
> > > > >> >
> > > > >> > I'm trying to create Logical Network and assign it
to cluster &
> > > want to
> > > > >> bond
> > > > >> > this to one of the Network Interface on Host. so that i
can
> isolate
> > > my
> > > > >> VM
> > > > >> > from other networks.
> > > > >> >
> > > > >> > The issue is even if i set Cluster while creating
Logical
> Network,
> > > it
> > > > >> is not
> > > > >> > setting the cluster. In Web Admin it is in unset
state.
> > > > >> >
> > > > >> > Also, let me know how do i bind this Logical network on
Host
> > > Interface.
> > > > >> >
> > > > >> > Java code:
> > > > >> >
> > > > >> > Network nw1=new Network();
> > > > >> > VLAN vlan = new VLAN();
> > > > >> > vlan.setId(2000);
> > > > >> > nw1.setVlan(vlan);
> > > > >> > IP ip = new IP();
> > > > >> > ip.setAddress("192.168.1.151");
> > > > >> > ip.setGateway("192.168.1.1");
> > > > >> > ip.setNetmask("255.255.255.0");
> > > > >>
> > > > >> Note that the stated IP above will not be used to set the
address
> on
> > > the
> > > > >> host itself.
> > > > >> In order to do so you should use either the 'setup
networks' api
> on
> > > > >> host's nics level.
> > > > >> (Alternately, you can send POST request to
/hosts/{host:id}/nics
> which
> > > > >> utilize the
> > > > >> former api (it is a bit simpler than using the setup
networks
> api).
> > > > >>
> > > > >> Should look like:
> > > > >> Host host = api.getHosts().get("host_name");
> > > > >> Action action = new Action();
> > > > >> action.setCheckConnectivity(true); //required for
rollback in
> > > case of
> > > > >> configuration failure
> > > > >> action.setHostNics(...); // should contain the target
> > > configuration
> > > > >> host.getHostNics().setupnetworks(action);
> > > > >>
> > > > >> where the action should contain the entire desired network
> > > configuration.
> > > > >>
> > > > >> You can find various python-sdk example for setup networks
on my
> blog
> > > [1]
> > > > >> I'll post few examples using the java sdk earlier next
week.
> > > > >>
> > > > >> [1] https://motiasayag.wordpress.com/
> > > > >>
> > > > >> > nw1.setIp(ip);
> > > > >> > nw1.setName("apiNetwork");
> > > > >> >
> > > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > > >> >
> > > > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > > > >> api.getNetworks().add(nw1);
> > > > >> >
> > > > >> > --
> > > > >> > Thanks & Regards
> > > > >> > Tejesh
> > > > >> >
> > > > >> > _______________________________________________
> > > > >> > Users mailing list
> > > > >> > Users(a)ovirt.org
> > > > >> > http://lists.ovirt.org/mailman/listinfo/users
> > > > >> >
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Thanks & Regards
> > > > > Tejesh
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Thanks & Regards
> > > > Tejesh
> > > >
> > >
> >
> >
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
>
--
Thanks & Regards
Tejesh
8:36 a.m.
Ok got it..
I just observed that my setup network is not getting saved, after attaching
my logical network to host nic.
On Mon, Mar 3, 2014 at 7:34 PM, Moti Asayag <masayag(a)redhat.com> wrote:
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "Moti Asayag" <masayag(a)redhat.com>
> Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Monday, March 3, 2014 3:46:14 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> Thanks, I'm able to create logical network & attached the same to host.
>
> Now I tried to change the network for a VM nic from rhevm to VLAN1189,
but
> it is not working. any suggestion?
>
>
>
api.getVMs().get(vmName).getNics().get("nic1").setNetwork(api.getNetworks().get("VLAN1189"));
> api.getVMs().get(vmName).getNics().get("nic1").update();
>
This snippet is wrong: You attempt to modify a newly fetched
vnic than the one that was just modified in the first line.
I'd try:
VMNIC vnic = api.getVMs().get(vmName).getNics().get("nic1");
vnic.setNetwork(api.getNetworks().get("VLAN1189"));
vnic.update();
If this doesn't work - keep reading :-)
There has been a recent bug in this regards [1].
You can by pass it by nullifying the vnic-profile value until getting the
next stable version (or using the 3.4 rc build).
You can read more about the vnic profile and see python examples here [2]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1047887
Bug 1047887 - Update vnic_profile fails for VM vnic
[2] https://motiasayag.wordpress.com/2014/02/02/vnic-profiles/
>
>
>
> On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > Sent: Monday, February 24, 2014 1:18:53 PM
> > > Subject: Re: [Users] Creating Logical Network issue - API
> > >
> > > The example updates the existing Network (i.e. if the Logical
Network is
> > > already mapped to eth1). But what i'm looking for is how to map
Logical
> > > Network "ApiNetWork" to "eth1", please refer
screenshot.
> > >
> >
> > Please check the last example named "AddNetworkToNic" from
> >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> >
> > It should achieve what you're aiming for.
> >
> > >
> > > On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com>
wrote:
> > >
> > > > ----- Original Message -----
> > > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > > > Subject: Re: [Users] Creating Logical Network issue - API
> > > > >
> > > > > While setting Logical Network, it fails with below error:
> > > > > code : 400
> > > > > reason: Bad Request
> > > > > detail: Previous network name is required.
> > > >
> > > > See an example in the following post:
> > > >
> > > >
> > > >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > > >
> > > > >
> > > > > Code:
> > > > > String nw_name="ApiNetWork";
> > > > > org.ovirt.engine.sdk.decorators.Host hst =
> > > > > api.getHosts().get("rhevhost");
> > > > >
> > > > >
> >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > > > >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > > > >
> > //hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > > > hst.getHostNics().get("eth1").update();
> > > > >
> > > > >
> > > > >
> > > > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M
<tejeshmk(a)gmail.com>
> > wrote:
> > > > >
> > > > > > Can you tel me how do i assign Logical Network(s) to one of
the
> > > > Physical
> > > > > > Nic on the Host.
> > > > > >
> > > > > >
> > > > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <
masayag(a)redhat.com>
> > > > wrote:
> > > > > >
> > > > > >> h
> > > > > >>
> > > > > >> ----- Original Message -----
> > > > > >> > From: "Tejesh M"
<tejeshmk(a)gmail.com>
> > > > > >> > To: "users(a)oVirt.org"
<users(a)ovirt.org>
> > > > > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > > > > >> > Subject: [Users] Creating Logical Network issue -
API
> > > > > >> >
> > > > > >> > Hi ,
> > > > > >> >
> > > > > >> > I'm trying to create Logical Network and
assign it to
cluster &
> > > > want to
> > > > > >> bond
> > > > > >> > this to one of the Network Interface on Host. so
that i can
> > isolate
> > > > my
> > > > > >> VM
> > > > > >> > from other networks.
> > > > > >> >
> > > > > >> > The issue is even if i set Cluster while creating
Logical
> > Network,
> > > > it
> > > > > >> is not
> > > > > >> > setting the cluster. In Web Admin it is in unset
state.
> > > > > >> >
> > > > > >> > Also, let me know how do i bind this Logical
network on Host
> > > > Interface.
> > > > > >> >
> > > > > >> > Java code:
> > > > > >> >
> > > > > >> > Network nw1=new Network();
> > > > > >> > VLAN vlan = new VLAN();
> > > > > >> > vlan.setId(2000);
> > > > > >> > nw1.setVlan(vlan);
> > > > > >> > IP ip = new IP();
> > > > > >> > ip.setAddress("192.168.1.151");
> > > > > >> > ip.setGateway("192.168.1.1");
> > > > > >> > ip.setNetmask("255.255.255.0");
> > > > > >>
> > > > > >> Note that the stated IP above will not be used to set
the
address
> > on
> > > > the
> > > > > >> host itself.
> > > > > >> In order to do so you should use either the 'setup
networks'
api
> > on
> > > > > >> host's nics level.
> > > > > >> (Alternately, you can send POST request to
/hosts/{host:id}/nics
> > which
> > > > > >> utilize the
> > > > > >> former api (it is a bit simpler than using the setup
networks
> > api).
> > > > > >>
> > > > > >> Should look like:
> > > > > >> Host host =
api.getHosts().get("host_name");
> > > > > >> Action action = new Action();
> > > > > >> action.setCheckConnectivity(true); //required for
rollback in
> > > > case of
> > > > > >> configuration failure
> > > > > >> action.setHostNics(...); // should contain the
target
> > > > configuration
> > > > > >> host.getHostNics().setupnetworks(action);
> > > > > >>
> > > > > >> where the action should contain the entire desired
network
> > > > configuration.
> > > > > >>
> > > > > >> You can find various python-sdk example for setup
networks on
my
> > blog
> > > > [1]
> > > > > >> I'll post few examples using the java sdk earlier
next week.
> > > > > >>
> > > > > >> [1] https://motiasayag.wordpress.com/
> > > > > >>
> > > > > >> > nw1.setIp(ip);
> > > > > >> > nw1.setName("apiNetwork");
> > > > > >> >
> > > > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > > > >> >
> > > > > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > > > > >> api.getNetworks().add(nw1);
> > > > > >> >
> > > > > >> > --
> > > > > >> > Thanks & Regards
> > > > > >> > Tejesh
> > > > > >> >
> > > > > >> > _______________________________________________
> > > > > >> > Users mailing list
> > > > > >> > Users(a)ovirt.org
> > > > > >> > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >> >
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Thanks & Regards
> > > > > > Tejesh
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Thanks & Regards
> > > > > Tejesh
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
8:44 a.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "Moti Asayag" <masayag(a)redhat.com>
Cc: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Monday, March 3, 2014 4:36:32 PM
Subject: Re: [Users] Creating Logical Network issue - API
Ok got it..
I just observed that my setup network is not getting saved, after attaching
my logical network to host nic.
Let me refer you to yet another post [1]:
You should add the following at the end of your setup-networks action:
api.getHosts().get("your-host").commitnetconfig(new Action());
[1] https://motiasayag.wordpress.com/2013/04/08/it-is-not-over-till-moti-sings/
On Mon, Mar 3, 2014 at 7:34 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
>
> ----- Original Message -----
> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > To: "Moti Asayag" <masayag(a)redhat.com>
> > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > Sent: Monday, March 3, 2014 3:46:14 PM
> > Subject: Re: [Users] Creating Logical Network issue - API
> >
> > Thanks, I'm able to create logical network & attached the same to
host.
> >
> > Now I tried to change the network for a VM nic from rhevm to VLAN1189,
> but
> > it is not working. any suggestion?
> >
> >
> >
>
api.getVMs().get(vmName).getNics().get("nic1").setNetwork(api.getNetworks().get("VLAN1189"));
> > api.getVMs().get(vmName).getNics().get("nic1").update();
> >
>
> This snippet is wrong: You attempt to modify a newly fetched
> vnic than the one that was just modified in the first line.
>
> I'd try:
> VMNIC vnic = api.getVMs().get(vmName).getNics().get("nic1");
> vnic.setNetwork(api.getNetworks().get("VLAN1189"));
> vnic.update();
>
> If this doesn't work - keep reading :-)
>
> There has been a recent bug in this regards [1].
>
> You can by pass it by nullifying the vnic-profile value until getting the
> next stable version (or using the 3.4 rc build).
>
> You can read more about the vnic profile and see python examples here [2]
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1047887
> Bug 1047887 - Update vnic_profile fails for VM vnic
>
> [2] https://motiasayag.wordpress.com/2014/02/02/vnic-profiles/
>
> >
> >
> >
> > On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com> wrote:
> >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > > Sent: Monday, February 24, 2014 1:18:53 PM
> > > > Subject: Re: [Users] Creating Logical Network issue - API
> > > >
> > > > The example updates the existing Network (i.e. if the Logical
> Network is
> > > > already mapped to eth1). But what i'm looking for is how to map
> Logical
> > > > Network "ApiNetWork" to "eth1", please refer
screenshot.
> > > >
> > >
> > > Please check the last example named "AddNetworkToNic" from
> > >
> > >
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > >
> > > It should achieve what you're aiming for.
> > >
> > > >
> > > > On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag
<masayag(a)redhat.com>
> wrote:
> > > >
> > > > > ----- Original Message -----
> > > > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > > > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > > > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > > > > Subject: Re: [Users] Creating Logical Network issue - API
> > > > > >
> > > > > > While setting Logical Network, it fails with below error:
> > > > > > code : 400
> > > > > > reason: Bad Request
> > > > > > detail: Previous network name is required.
> > > > >
> > > > > See an example in the following post:
> > > > >
> > > > >
> > > > >
> > >
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > > > >
> > > > > >
> > > > > > Code:
> > > > > > String nw_name="ApiNetWork";
> > > > > > org.ovirt.engine.sdk.decorators.Host hst =
> > > > > > api.getHosts().get("rhevhost");
> > > > > >
> > > > > >
> > >
> hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > > > > >
> //hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > > > > >
> > > //hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > > > >
hst.getHostNics().get("eth1").update();
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M
<tejeshmk(a)gmail.com>
> > > wrote:
> > > > > >
> > > > > > > Can you tel me how do i assign Logical Network(s) to
one of the
> > > > > Physical
> > > > > > > Nic on the Host.
> > > > > > >
> > > > > > >
> > > > > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <
> masayag(a)redhat.com>
> > > > > wrote:
> > > > > > >
> > > > > > >> h
> > > > > > >>
> > > > > > >> ----- Original Message -----
> > > > > > >> > From: "Tejesh M"
<tejeshmk(a)gmail.com>
> > > > > > >> > To: "users(a)oVirt.org"
<users(a)ovirt.org>
> > > > > > >> > Sent: Thursday, February 20, 2014 11:48:56
AM
> > > > > > >> > Subject: [Users] Creating Logical Network
issue - API
> > > > > > >> >
> > > > > > >> > Hi ,
> > > > > > >> >
> > > > > > >> > I'm trying to create Logical Network and
assign it to
> cluster &
> > > > > want to
> > > > > > >> bond
> > > > > > >> > this to one of the Network Interface on Host.
so that i can
> > > isolate
> > > > > my
> > > > > > >> VM
> > > > > > >> > from other networks.
> > > > > > >> >
> > > > > > >> > The issue is even if i set Cluster while
creating Logical
> > > Network,
> > > > > it
> > > > > > >> is not
> > > > > > >> > setting the cluster. In Web Admin it is in
unset state.
> > > > > > >> >
> > > > > > >> > Also, let me know how do i bind this Logical
network on Host
> > > > > Interface.
> > > > > > >> >
> > > > > > >> > Java code:
> > > > > > >> >
> > > > > > >> > Network nw1=new Network();
> > > > > > >> > VLAN vlan = new VLAN();
> > > > > > >> > vlan.setId(2000);
> > > > > > >> > nw1.setVlan(vlan);
> > > > > > >> > IP ip = new IP();
> > > > > > >> > ip.setAddress("192.168.1.151");
> > > > > > >> > ip.setGateway("192.168.1.1");
> > > > > > >> > ip.setNetmask("255.255.255.0");
> > > > > > >>
> > > > > > >> Note that the stated IP above will not be used to
set the
> address
> > > on
> > > > > the
> > > > > > >> host itself.
> > > > > > >> In order to do so you should use either the
'setup networks'
> api
> > > on
> > > > > > >> host's nics level.
> > > > > > >> (Alternately, you can send POST request to
> /hosts/{host:id}/nics
> > > which
> > > > > > >> utilize the
> > > > > > >> former api (it is a bit simpler than using the
setup networks
> > > api).
> > > > > > >>
> > > > > > >> Should look like:
> > > > > > >> Host host =
api.getHosts().get("host_name");
> > > > > > >> Action action = new Action();
> > > > > > >> action.setCheckConnectivity(true); //required
for
> rollback in
> > > > > case of
> > > > > > >> configuration failure
> > > > > > >> action.setHostNics(...); // should contain the
target
> > > > > configuration
> > > > > > >> host.getHostNics().setupnetworks(action);
> > > > > > >>
> > > > > > >> where the action should contain the entire desired
network
> > > > > configuration.
> > > > > > >>
> > > > > > >> You can find various python-sdk example for setup
networks on
> my
> > > blog
> > > > > [1]
> > > > > > >> I'll post few examples using the java sdk
earlier next week.
> > > > > > >>
> > > > > > >> [1] https://motiasayag.wordpress.com/
> > > > > > >>
> > > > > > >> > nw1.setIp(ip);
> > > > > > >> > nw1.setName("apiNetwork");
> > > > > > >> >
> > > > > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > > > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > > > > >> >
> > > > > > >> > org.ovirt.engine.sdk.decorators.Network nw2
=
> > > > > > >> api.getNetworks().add(nw1);
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> > Thanks & Regards
> > > > > > >> > Tejesh
> > > > > > >> >
> > > > > > >> >
_______________________________________________
> > > > > > >> > Users mailing list
> > > > > > >> > Users(a)ovirt.org
> > > > > > >> >
http://lists.ovirt.org/mailman/listinfo/users
> > > > > > >> >
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Thanks & Regards
> > > > > > > Tejesh
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Thanks & Regards
> > > > > > Tejesh
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Thanks & Regards
> > > > Tejesh
> > > >
> > >
> >
> >
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
>
--
Thanks & Regards
Tejesh
10:29 p.m.
Thanks alot.
On Mon, Mar 3, 2014 at 8:14 PM, Moti Asayag <masayag(a)redhat.com> wrote:
----- Original Message -----
> From: "Tejesh M" <tejeshmk(a)gmail.com>
> To: "Moti Asayag" <masayag(a)redhat.com>
> Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> Sent: Monday, March 3, 2014 4:36:32 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> Ok got it..
> I just observed that my setup network is not getting saved, after
attaching
> my logical network to host nic.
>
Let me refer you to yet another post [1]:
You should add the following at the end of your setup-networks action:
api.getHosts().get("your-host").commitnetconfig(new Action());
[1]
https://motiasayag.wordpress.com/2013/04/08/it-is-not-over-till-moti-sings/
>
> On Mon, Mar 3, 2014 at 7:34 PM, Moti Asayag <masayag(a)redhat.com> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > Sent: Monday, March 3, 2014 3:46:14 PM
> > > Subject: Re: [Users] Creating Logical Network issue - API
> > >
> > > Thanks, I'm able to create logical network & attached the same to
host.
> > >
> > > Now I tried to change the network for a VM nic from rhevm to
VLAN1189,
> > but
> > > it is not working. any suggestion?
> > >
> > >
> > >
> >
api.getVMs().get(vmName).getNics().get("nic1").setNetwork(api.getNetworks().get("VLAN1189"));
> > >
api.getVMs().get(vmName).getNics().get("nic1").update();
> > >
> >
> > This snippet is wrong: You attempt to modify a newly fetched
> > vnic than the one that was just modified in the first line.
> >
> > I'd try:
> > VMNIC vnic = api.getVMs().get(vmName).getNics().get("nic1");
> > vnic.setNetwork(api.getNetworks().get("VLAN1189"));
> > vnic.update();
> >
> > If this doesn't work - keep reading :-)
> >
> > There has been a recent bug in this regards [1].
> >
> > You can by pass it by nullifying the vnic-profile value until getting
the
> > next stable version (or using the 3.4 rc build).
> >
> > You can read more about the vnic profile and see python examples here
[2]
> >
> > [1] https://bugzilla.redhat.com/show_bug.cgi?id=1047887
> > Bug 1047887 - Update vnic_profile fails for VM vnic
> >
> > [2] https://motiasayag.wordpress.com/2014/02/02/vnic-profiles/
> >
> > >
> > >
> > >
> > > On Mon, Feb 24, 2014 at 5:23 PM, Moti Asayag <masayag(a)redhat.com>
wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > > To: "Moti Asayag" <masayag(a)redhat.com>
> > > > > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > > > > Sent: Monday, February 24, 2014 1:18:53 PM
> > > > > Subject: Re: [Users] Creating Logical Network issue - API
> > > > >
> > > > > The example updates the existing Network (i.e. if the Logical
> > Network is
> > > > > already mapped to eth1). But what i'm looking for is how to
map
> > Logical
> > > > > Network "ApiNetWork" to "eth1", please refer
screenshot.
> > > > >
> > > >
> > > > Please check the last example named "AddNetworkToNic" from
> > > >
> > > >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > > >
> > > > It should achieve what you're aiming for.
> > > >
> > > > >
> > > > > On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag
<masayag(a)redhat.com
>
> > wrote:
> > > > >
> > > > > > ----- Original Message -----
> > > > > > > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > > > > > > To: "Moti Asayag"
<masayag(a)redhat.com>
> > > > > > > Cc: "users(a)oVirt.org"
<users(a)ovirt.org>
> > > > > > > Sent: Monday, February 24, 2014 11:59:42 AM
> > > > > > > Subject: Re: [Users] Creating Logical Network issue -
API
> > > > > > >
> > > > > > > While setting Logical Network, it fails with below
error:
> > > > > > > code : 400
> > > > > > > reason: Bad Request
> > > > > > > detail: Previous network name is required.
> > > > > >
> > > > > > See an example in the following post:
> > > > > >
> > > > > >
> > > > > >
> > > >
> >
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
> > > > > >
> > > > > > >
> > > > > > > Code:
> > > > > > > String nw_name="ApiNetWork";
> > > > > > > org.ovirt.engine.sdk.decorators.Host hst =
> > > > > > > api.getHosts().get("rhevhost");
> > > > > > >
> > > > > > >
> > > >
> >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> > > > > > >
> > //hst.getHostNics().get("eth1").setCheckConnectivity(true);
> > > > > > >
> > > >
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > > > > > >
hst.getHostNics().get("eth1").update();
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <
tejeshmk(a)gmail.com>
> > > > wrote:
> > > > > > >
> > > > > > > > Can you tel me how do i assign Logical Network(s)
to one
of the
> > > > > > Physical
> > > > > > > > Nic on the Host.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag
<
> > masayag(a)redhat.com>
> > > > > > wrote:
> > > > > > > >
> > > > > > > >> h
> > > > > > > >>
> > > > > > > >> ----- Original Message -----
> > > > > > > >> > From: "Tejesh M"
<tejeshmk(a)gmail.com>
> > > > > > > >> > To: "users(a)oVirt.org"
<users(a)ovirt.org>
> > > > > > > >> > Sent: Thursday, February 20, 2014
11:48:56 AM
> > > > > > > >> > Subject: [Users] Creating Logical
Network issue - API
> > > > > > > >> >
> > > > > > > >> > Hi ,
> > > > > > > >> >
> > > > > > > >> > I'm trying to create Logical Network
and assign it to
> > cluster &
> > > > > > want to
> > > > > > > >> bond
> > > > > > > >> > this to one of the Network Interface on
Host. so that i
can
> > > > isolate
> > > > > > my
> > > > > > > >> VM
> > > > > > > >> > from other networks.
> > > > > > > >> >
> > > > > > > >> > The issue is even if i set Cluster while
creating
Logical
> > > > Network,
> > > > > > it
> > > > > > > >> is not
> > > > > > > >> > setting the cluster. In Web Admin it is
in unset state.
> > > > > > > >> >
> > > > > > > >> > Also, let me know how do i bind this
Logical network on
Host
> > > > > > Interface.
> > > > > > > >> >
> > > > > > > >> > Java code:
> > > > > > > >> >
> > > > > > > >> > Network nw1=new Network();
> > > > > > > >> > VLAN vlan = new VLAN();
> > > > > > > >> > vlan.setId(2000);
> > > > > > > >> > nw1.setVlan(vlan);
> > > > > > > >> > IP ip = new IP();
> > > > > > > >> >
ip.setAddress("192.168.1.151");
> > > > > > > >> > ip.setGateway("192.168.1.1");
> > > > > > > >> >
ip.setNetmask("255.255.255.0");
> > > > > > > >>
> > > > > > > >> Note that the stated IP above will not be
used to set the
> > address
> > > > on
> > > > > > the
> > > > > > > >> host itself.
> > > > > > > >> In order to do so you should use either the
'setup
networks'
> > api
> > > > on
> > > > > > > >> host's nics level.
> > > > > > > >> (Alternately, you can send POST request to
> > /hosts/{host:id}/nics
> > > > which
> > > > > > > >> utilize the
> > > > > > > >> former api (it is a bit simpler than using
the setup
networks
> > > > api).
> > > > > > > >>
> > > > > > > >> Should look like:
> > > > > > > >> Host host =
api.getHosts().get("host_name");
> > > > > > > >> Action action = new Action();
> > > > > > > >> action.setCheckConnectivity(true);
//required for
> > rollback in
> > > > > > case of
> > > > > > > >> configuration failure
> > > > > > > >> action.setHostNics(...); // should
contain the target
> > > > > > configuration
> > > > > > > >>
host.getHostNics().setupnetworks(action);
> > > > > > > >>
> > > > > > > >> where the action should contain the entire
desired network
> > > > > > configuration.
> > > > > > > >>
> > > > > > > >> You can find various python-sdk example for
setup
networks on
> > my
> > > > blog
> > > > > > [1]
> > > > > > > >> I'll post few examples using the java sdk
earlier next
week.
> > > > > > > >>
> > > > > > > >> [1] https://motiasayag.wordpress.com/
> > > > > > > >>
> > > > > > > >> > nw1.setIp(ip);
> > > > > > > >> > nw1.setName("apiNetwork");
> > > > > > > >> >
> > > > > > > >> >
nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > > > > > > >> >
nw1.setCluster(api.getClusters().get("testCluster"));
> > > > > > > >> >
> > > > > > > >> > org.ovirt.engine.sdk.decorators.Network
nw2 =
> > > > > > > >> api.getNetworks().add(nw1);
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> > Thanks & Regards
> > > > > > > >> > Tejesh
> > > > > > > >> >
> > > > > > > >> >
_______________________________________________
> > > > > > > >> > Users mailing list
> > > > > > > >> > Users(a)ovirt.org
> > > > > > > >> >
http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Thanks & Regards
> > > > > > > > Tejesh
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Thanks & Regards
> > > > > > > Tejesh
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Thanks & Regards
> > > > > Tejesh
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
>
>
>
> --
> Thanks & Regards
> Tejesh
>
--
Thanks & Regards
Tejesh
6:35 a.m.
----- Original Message -----
From: "Tejesh M" <tejeshmk(a)gmail.com>
To: "Moti Asayag" <masayag(a)redhat.com>
Cc: "users(a)oVirt.org" <users(a)ovirt.org>
Sent: Monday, February 24, 2014 1:18:53 PM
Subject: Re: [Users] Creating Logical Network issue - API
The example updates the existing Network (i.e. if the Logical Network is
already mapped to eth1). But what i'm looking for is how to map Logical
Network "ApiNetWork" to "eth1", please refer screenshot.
There is an example of the 'setup networks' api usage via the java sdk in [1]
which is the recommended api for configuring host networking.
[1] https://motiasayag.wordpress.com/2014/02/24/invoke-setup-networks-from-th...
On Mon, Feb 24, 2014 at 4:11 PM, Moti Asayag <masayag(a)redhat.com> wrote:
> ----- Original Message -----
> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > To: "Moti Asayag" <masayag(a)redhat.com>
> > Cc: "users(a)oVirt.org" <users(a)ovirt.org>
> > Sent: Monday, February 24, 2014 11:59:42 AM
> > Subject: Re: [Users] Creating Logical Network issue - API
> >
> > While setting Logical Network, it fails with below error:
> > code : 400
> > reason: Bad Request
> > detail: Previous network name is required.
>
> See an example in the following post:
>
>
>
https://motiasayag.wordpress.com/2014/02/24/network-configuration-using-o...
>
> >
> > Code:
> > String nw_name="ApiNetWork";
> > org.ovirt.engine.sdk.decorators.Host hst =
> > api.getHosts().get("rhevhost");
> >
> >
hst.getHostNics().get("eth1").setNetwork(api.getNetworks().get(nw_name));
> >
//hst.getHostNics().get("eth1").setCheckConnectivity(true);
> >
//hst.getHostNics().get("eth1").setOverrideConfiguration(true);
> > hst.getHostNics().get("eth1").update();
> >
> >
> >
> > On Mon, Feb 24, 2014 at 2:30 PM, Tejesh M <tejeshmk(a)gmail.com> wrote:
> >
> > > Can you tel me how do i assign Logical Network(s) to one of the
> Physical
> > > Nic on the Host.
> > >
> > >
> > > On Fri, Feb 21, 2014 at 1:37 PM, Moti Asayag <masayag(a)redhat.com>
> wrote:
> > >
> > >> h
> > >>
> > >> ----- Original Message -----
> > >> > From: "Tejesh M" <tejeshmk(a)gmail.com>
> > >> > To: "users(a)oVirt.org" <users(a)ovirt.org>
> > >> > Sent: Thursday, February 20, 2014 11:48:56 AM
> > >> > Subject: [Users] Creating Logical Network issue - API
> > >> >
> > >> > Hi ,
> > >> >
> > >> > I'm trying to create Logical Network and assign it to cluster
&
> want to
> > >> bond
> > >> > this to one of the Network Interface on Host. so that i can
isolate
> my
> > >> VM
> > >> > from other networks.
> > >> >
> > >> > The issue is even if i set Cluster while creating Logical
Network,
> it
> > >> is not
> > >> > setting the cluster. In Web Admin it is in unset state.
> > >> >
> > >> > Also, let me know how do i bind this Logical network on Host
> Interface.
> > >> >
> > >> > Java code:
> > >> >
> > >> > Network nw1=new Network();
> > >> > VLAN vlan = new VLAN();
> > >> > vlan.setId(2000);
> > >> > nw1.setVlan(vlan);
> > >> > IP ip = new IP();
> > >> > ip.setAddress("192.168.1.151");
> > >> > ip.setGateway("192.168.1.1");
> > >> > ip.setNetmask("255.255.255.0");
> > >>
> > >> Note that the stated IP above will not be used to set the address on
> the
> > >> host itself.
> > >> In order to do so you should use either the 'setup networks'
api on
> > >> host's nics level.
> > >> (Alternately, you can send POST request to /hosts/{host:id}/nics
which
> > >> utilize the
> > >> former api (it is a bit simpler than using the setup networks api).
> > >>
> > >> Should look like:
> > >> Host host = api.getHosts().get("host_name");
> > >> Action action = new Action();
> > >> action.setCheckConnectivity(true); //required for rollback in
> case of
> > >> configuration failure
> > >> action.setHostNics(...); // should contain the target
> configuration
> > >> host.getHostNics().setupnetworks(action);
> > >>
> > >> where the action should contain the entire desired network
> configuration.
> > >>
> > >> You can find various python-sdk example for setup networks on my blog
> [1]
> > >> I'll post few examples using the java sdk earlier next week.
> > >>
> > >> [1] https://motiasayag.wordpress.com/
> > >>
> > >> > nw1.setIp(ip);
> > >> > nw1.setName("apiNetwork");
> > >> >
> > >> > nw1.setDataCenter(api.getDataCenters().get("testDC"));
> > >> > nw1.setCluster(api.getClusters().get("testCluster"));
> > >> >
> > >> > org.ovirt.engine.sdk.decorators.Network nw2 =
> > >> api.getNetworks().add(nw1);
> > >> >
> > >> > --
> > >> > Thanks & Regards
> > >> > Tejesh
> > >> >
> > >> > _______________________________________________
> > >> > Users mailing list
> > >> > Users(a)ovirt.org
> > >> > http://lists.ovirt.org/mailman/listinfo/users
> > >> >
> > >>
> > >
> > >
> > >
> > > --
> > > Thanks & Regards
> > > Tejesh
> > >
> >
> >
> >
> > --
> > Thanks & Regards
> > Tejesh
> >
>
--
Thanks & Regards
Tejesh
3728
days inactive
3740
days old
15 comments
2 participants
participants (2)
-
Moti Asayag -
Tejesh M