Update to 4.2.5, Cant start VMs
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node. When I try to start the VMs that were pinned to the host, I get: VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi'
controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck. When I try to migrate a running VM to this host, I get: Host Letty has network interface which exceeded the defined threshold [95%]
(bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck. I did successfully migrate the Hosted Engine to the new host, no errors. Thanks for any advice! Vincent
From which version do you upgrade. 4.2.4 works fine for me. In the past i had a similar issue while upgrade from x.x.x to 4.2.3 with double network and disks. I run RUN->ONCE OK (Error message ignore) OK, then run normal with RUN that fixes the issue.
Am 06.08.2018 um 06:02 schrieb Vincent Royer <vincent@epicenergy.ca>:
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node.
When I try to start the VMs that were pinned to the host, I get:
VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi' controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck.
When I try to migrate a running VM to this host, I get:
Host Letty has network interface which exceeded the defined threshold [95%] (bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck.
I did successfully migrate the Hosted Engine to the new host, no errors.
Thanks for any advice!
Vincent
Upgraded from 4.2.0. None of the networks or disks show as being doubled, were your symptoms similar? I tried run once with the same result. On Mon, Aug 6, 2018, 4:09 AM Oliver Riesener <Oliver.Riesener@hs-bremen.de> wrote:
From which version do you upgrade. 4.2.4 works fine for me.
In the past i had a similar issue while upgrade from x.x.x to 4.2.3 with double network and disks. I run RUN->ONCE OK (Error message ignore) OK, then run normal with RUN that fixes the issue.
Am 06.08.2018 um 06:02 schrieb Vincent Royer <vincent@epicenergy.ca>:
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node.
When I try to start the VMs that were pinned to the host, I get:
VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi'
controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck.
When I try to migrate a running VM to this host, I get:
Host Letty has network interface which exceeded the defined threshold
[95%] (bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck.
I did successfully migrate the Hosted Engine to the new host, no errors.
Thanks for any advice!
Vincent
Would be great to get some help with this, no VMs will start on a freshly installed 4.2.5 node (not upgraded, installed fresh from new ISO) I created a new VM from Centos 7 template imported from Glance repository. It won't start, although it starts fine on my 4.2.0 host. Error upon starting VM, error was similar to this bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1595549>, so I commented there with my logs. So far the only VM that will run on the 4.2.5 host is the hosted engine. On Sun, Aug 5, 2018 at 9:02 PM Vincent Royer <vincent@epicenergy.ca> wrote:
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node.
When I try to start the VMs that were pinned to the host, I get:
VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi'
controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck.
When I try to migrate a running VM to this host, I get:
Host Letty has network interface which exceeded the defined threshold
[95%] (bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck.
I did successfully migrate the Hosted Engine to the new host, no errors.
Thanks for any advice!
Vincent
I see that the bug is urgent but sitting a month. cc'ing some people who may be able to assist. On Tue, Aug 7, 2018 at 4:16 PM Vincent Royer <vincent@epicenergy.ca> wrote:
Would be great to get some help with this, no VMs will start on a freshly installed 4.2.5 node (not upgraded, installed fresh from new ISO)
I created a new VM from Centos 7 template imported from Glance repository. It won't start, although it starts fine on my 4.2.0 host.
Error upon starting VM, error was similar to this bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1595549>, so I commented there with my logs.
So far the only VM that will run on the 4.2.5 host is the hosted engine.
On Sun, Aug 5, 2018 at 9:02 PM Vincent Royer <vincent@epicenergy.ca> wrote:
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node.
When I try to start the VMs that were pinned to the host, I get:
VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi'
controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck.
When I try to migrate a running VM to this host, I get:
Host Letty has network interface which exceeded the defined threshold
[95%] (bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck.
I did successfully migrate the Hosted Engine to the new host, no errors.
Thanks for any advice!
Vincent
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/M3OHBRTVCYV2KP...
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
Adding Arik On Tue, Aug 7, 2018, 23:15 Vincent Royer <vincent@epicenergy.ca> wrote:
Would be great to get some help with this, no VMs will start on a freshly installed 4.2.5 node (not upgraded, installed fresh from new ISO)
I created a new VM from Centos 7 template imported from Glance repository. It won't start, although it starts fine on my 4.2.0 host.
Error upon starting VM, error was similar to this bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1595549>, so I commented there with my logs.
So far the only VM that will run on the 4.2.5 host is the hosted engine.
On Sun, Aug 5, 2018 at 9:02 PM Vincent Royer <vincent@epicenergy.ca> wrote:
I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node.
When I try to start the VMs that were pinned to the host, I get:
VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi'
controllers with index '0'.
To fix this I tried to detach the disk and re-attach it, no luck.
When I try to migrate a running VM to this host, I get:
Host Letty has network interface which exceeded the defined threshold
[95%] (bond0: transmit rate[0%], receive rate [97%])
The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck.
I did successfully migrate the Hosted Engine to the new host, no errors.
Thanks for any advice!
Vincent
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/M3OHBRTVCYV2KP...
participants (4)
-
Greg Sheremeta -
Oliver Riesener -
Raz Tamir -
Vincent Royer