[Users] Missing CPU features : CpuFlags
Hello, I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow I guess the CPU is pre-conroe, how can I add this to virt engine? Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/ Complete /proc/cpuinfo output: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 4 microcode : 0x2 cpu MHz : 2992.569 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow bogomips : 5985.13 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual Thanks, Barry.
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
Complete /proc/cpuinfo output:
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 4 microcode : 0x2 cpu MHz : 2992.569 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow bogomips : 5985.13 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual
Thanks,
Barry.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
<capabilities> <host> <uuid>44454c4c-3300-1036-8039-b3c04f59324a</uuid> <cpu> <arch>x86_64</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='2'/> <feature name='lahf_lm'/> <feature name='lm'/> <feature name='syscall'/> <feature name='xtpr'/> <feature name='cx16'/> <feature name='cid'/> <feature name='est'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='pse36'/> </cpu> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> <topology> <cells num='1'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> </cells> </topology> <secmodel> <model>selinux</model> <doi>0</doi> </secmodel> </host> <guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <pae/> <nonpae/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest> <guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest> </capabilities>
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
<capabilities>
<host> <uuid>44454c4c-3300-1036-8039-b3c04f59324a</uuid> <cpu> <arch>x86_64</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='2'/> <feature name='lahf_lm'/> <feature name='lm'/> <feature name='syscall'/> <feature name='xtpr'/> <feature name='cx16'/> <feature name='cid'/> <feature name='est'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='pse36'/> </cpu> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> <topology> <cells num='1'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> </cells> </topology> <secmodel> <model>selinux</model> <doi>0</doi> </secmodel> </host>
<guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <pae/> <nonpae/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
<guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
</capabilities>
ok, indeed an old host. the below config is what we used before going to the 'model' approach, so you can try this out (though highly recommended for newer cpu since they improved virt support in each generation) set the ServerCPUList config to this string for the relevant cluster compatibility level. I'm not sure upgrade won't override this for you though, so pay attention on upgrades to such a low level tweak (it's config, but not all configs are really expected to be changed by user) '2:Intel Xeon w/o XD/NX:vmx,sse2:qemu64,-nx,+sse2; 3:Intel Xeon:vmx,sse2,nx:qemu64,+sse2; 4:Intel Conroe Family:vmx,sse2,nx,cx16,ssse3:qemu64,+sse2,+cx16,+ssse3; 5:Intel Penryn Family:vmx,sse2,nx,cx16,ssse3,sse4_1:qemu64,+sse2,+cx16,+ssse3,+sse4.1; 6:Intel Nehalem Family:vmx,sse2,nx,cx16,ssse3,sse4_1,sse4_2,popcnt:qemu64,+sse2,+cx16,+ssse3,+sse4.1,+sse4.2,+popcnt; 2:AMD Opteron G1 w/o NX:svm,sse2:qemu64,-nx,+sse2; 3:AMD Opteron G1:svm,sse2,nx:qemu64,+sse2; 4:AMD Opteron G2:svm,sse2,nx,cx16:qemu64,+sse2,+cx16; 5:AMD Opteron G3:svm,sse2,nx,cx16,sse4a,misalignsse,popcnt,abm:qemu64,+sse2,+cx16,+sse4a,+misalignsse,+popcnt,+abm;'
Op 7 mei 2012, om 16:14 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow
I guess the CPU is pre-conroe, how can I add this to virt engine?
Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
<capabilities>
<host> <uuid>44454c4c-3300-1036-8039-b3c04f59324a</uuid> <cpu> <arch>x86_64</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='2'/> <feature name='lahf_lm'/> <feature name='lm'/> <feature name='syscall'/> <feature name='xtpr'/> <feature name='cx16'/> <feature name='cid'/> <feature name='est'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='pse36'/> </cpu> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> <topology> <cells num='1'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> </cells> </topology> <secmodel> <model>selinux</model> <doi>0</doi> </secmodel> </host>
<guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <pae/> <nonpae/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
<guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
</capabilities>
ok, indeed an old host. the below config is what we used before going to the 'model' approach, so you can try this out (though highly recommended for newer cpu since they improved virt support in each generation)
set the ServerCPUList config to this string for the relevant cluster compatibility level.
I'm not sure upgrade won't override this for you though, so pay attention on upgrades to such a low level tweak (it's config, but not all configs are really expected to be changed by user)
'2:Intel Xeon w/o XD/NX:vmx,sse2:qemu64,-nx,+sse2; 3:Intel Xeon:vmx,sse2,nx:qemu64,+sse2; 4:Intel Conroe Family:vmx,sse2,nx,cx16,ssse3:qemu64,+sse2,+cx16,+ssse3; 5:Intel Penryn Family:vmx,sse2,nx,cx16,ssse3,sse4_1:qemu64,+sse2,+cx16,+ssse3,+sse4.1; 6:Intel Nehalem Family:vmx,sse2,nx,cx16,ssse3,sse4_1,sse4_2,popcnt:qemu64,+sse2,+cx16,+ssse3,+sse4.1,+sse4.2,+popcnt; 2:AMD Opteron G1 w/o NX:svm,sse2:qemu64,-nx,+sse2; 3:AMD Opteron G1:svm,sse2,nx:qemu64,+sse2; 4:AMD Opteron G2:svm,sse2,nx,cx16:qemu64,+sse2,+cx16; 5:AMD Opteron G3:svm,sse2,nx,cx16,sse4a,misalignsse,popcnt,abm:qemu64,+sse2,+cx16,+sse4a,+misalignsse,+popcnt,+abm;'
Thanks for your help! This host is just a test setup, when (and if) we're going live the nodes will run on newer servers (now running citrix xenserver). Can you tell me where I have to modify the config? I mean: where can I find the file I need to modify?
On 05/07/2012 05:20 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 16:14 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote: > Hello, > > I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags > > These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow > > I guess the CPU is pre-conroe, how can I add this to virt engine? > > Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/
what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
<capabilities>
<host> <uuid>44454c4c-3300-1036-8039-b3c04f59324a</uuid> <cpu> <arch>x86_64</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='2'/> <feature name='lahf_lm'/> <feature name='lm'/> <feature name='syscall'/> <feature name='xtpr'/> <feature name='cx16'/> <feature name='cid'/> <feature name='est'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='pse36'/> </cpu> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> <topology> <cells num='1'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> </cells> </topology> <secmodel> <model>selinux</model> <doi>0</doi> </secmodel> </host>
<guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <pae/> <nonpae/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
<guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
</capabilities>
ok, indeed an old host. the below config is what we used before going to the 'model' approach, so you can try this out (though highly recommended for newer cpu since they improved virt support in each generation)
set the ServerCPUList config to this string for the relevant cluster compatibility level.
I'm not sure upgrade won't override this for you though, so pay attention on upgrades to such a low level tweak (it's config, but not all configs are really expected to be changed by user)
'2:Intel Xeon w/o XD/NX:vmx,sse2:qemu64,-nx,+sse2; 3:Intel Xeon:vmx,sse2,nx:qemu64,+sse2; 4:Intel Conroe Family:vmx,sse2,nx,cx16,ssse3:qemu64,+sse2,+cx16,+ssse3; 5:Intel Penryn Family:vmx,sse2,nx,cx16,ssse3,sse4_1:qemu64,+sse2,+cx16,+ssse3,+sse4.1; 6:Intel Nehalem Family:vmx,sse2,nx,cx16,ssse3,sse4_1,sse4_2,popcnt:qemu64,+sse2,+cx16,+ssse3,+sse4.1,+sse4.2,+popcnt; 2:AMD Opteron G1 w/o NX:svm,sse2:qemu64,-nx,+sse2; 3:AMD Opteron G1:svm,sse2,nx:qemu64,+sse2; 4:AMD Opteron G2:svm,sse2,nx,cx16:qemu64,+sse2,+cx16; 5:AMD Opteron G3:svm,sse2,nx,cx16,sse4a,misalignsse,popcnt,abm:qemu64,+sse2,+cx16,+sse4a,+misalignsse,+popcnt,+abm;'
Thanks for your help!
This host is just a test setup, when (and if) we're going live the nodes will run on newer servers (now running citrix xenserver).
Can you tell me where I have to modify the config? I mean: where can I find the file I need to modify?
db, not file. table is vdc_options ovirt-engine-config utility allows you to change it via cli (not sure this key is exposed in it, I'm guessing it is not)
Op 7 mei 2012, om 16:27 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 05:20 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 16:14 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
> On 05/07/2012 03:16 PM, Barry Kostjens wrote: >> Hello, >> >> I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags >> >> These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow >> >> I guess the CPU is pre-conroe, how can I add this to virt engine? >> >> Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/ > > what does 'vdsClient -s 0 getVdsCaps' shows for cpu flags when you run it on the ovirt node?
vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:1efa9130664b'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:1efa9130664b bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 cpuModel = Intel(R) Xeon(TM) CPU 3.00GHz cpuSockets = 1 cpuSpeed = 2992.569 emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 192.168.51.72 lastClientIface = ovirtmgmt management_ip = memSize = 1939 networks = {'ovirtmgmt': {'addr': '192.168.51.64', 'cfg': {'IPV6FORWARDING': 'no', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'ports': ['eth1'], 'netmask': '255.255.254.0', 'stp': 'off', 'gateway': '192.168.51.254'}} nics = {'eth3': {'hwaddr': '00:19:B9:E1:69:B7', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:15:17:2A:55:4F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:19:B9:E1:69:B5', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth0': {'hwaddr': '00:15:17:2A:55:4E', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '4.fc16.x86_64', 'buildtime': 1332266740.0, 'version': '3.3.0'}, 'spice-server': {'release': '1.fc16', 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release': '0.fc16', 'buildtime': '1328473568', 'version': '4.9.3.3'}, 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}, 'libvirt': {'release': '5.fc16', 'buildtime': '1330876988', 'version': '0.9.6'}, 'qemu-img': {'release': '4.fc16', 'buildtime': '1327954752', 'version': '0.15.1'}} reservedMem = 321 software_revision = 0 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = 44454C4C-3300-1036-8039-B3C04F59324A_00:15:17:2A:55:4E version_name = Snow Man vlans = {} vmTypes = ['kvm']
and virsh capabilities?
<capabilities>
<host> <uuid>44454c4c-3300-1036-8039-b3c04f59324a</uuid> <cpu> <arch>x86_64</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='2'/> <feature name='lahf_lm'/> <feature name='lm'/> <feature name='syscall'/> <feature name='xtpr'/> <feature name='cx16'/> <feature name='cid'/> <feature name='est'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='pse36'/> </cpu> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> <topology> <cells num='1'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> </cells> </topology> <secmodel> <model>selinux</model> <doi>0</doi> </secmodel> </host>
<guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <pae/> <nonpae/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
<guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/qemu-kvm</emulator> <machine>pc-0.14</machine> <machine canonical='pc-0.14'>pc</machine> <machine>fedora-13</machine> <machine>pc-0.13</machine> <machine>pc-0.12</machine> <machine>pc-0.11</machine> <machine>pc-0.10</machine> <machine>isapc</machine> </domain> </arch> <features> <cpuselection/> <deviceboot/> <acpi default='on' toggle='yes'/> <apic default='on' toggle='no'/> </features> </guest>
</capabilities>
ok, indeed an old host. the below config is what we used before going to the 'model' approach, so you can try this out (though highly recommended for newer cpu since they improved virt support in each generation)
set the ServerCPUList config to this string for the relevant cluster compatibility level.
I'm not sure upgrade won't override this for you though, so pay attention on upgrades to such a low level tweak (it's config, but not all configs are really expected to be changed by user)
'2:Intel Xeon w/o XD/NX:vmx,sse2:qemu64,-nx,+sse2; 3:Intel Xeon:vmx,sse2,nx:qemu64,+sse2; 4:Intel Conroe Family:vmx,sse2,nx,cx16,ssse3:qemu64,+sse2,+cx16,+ssse3; 5:Intel Penryn Family:vmx,sse2,nx,cx16,ssse3,sse4_1:qemu64,+sse2,+cx16,+ssse3,+sse4.1; 6:Intel Nehalem Family:vmx,sse2,nx,cx16,ssse3,sse4_1,sse4_2,popcnt:qemu64,+sse2,+cx16,+ssse3,+sse4.1,+sse4.2,+popcnt; 2:AMD Opteron G1 w/o NX:svm,sse2:qemu64,-nx,+sse2; 3:AMD Opteron G1:svm,sse2,nx:qemu64,+sse2; 4:AMD Opteron G2:svm,sse2,nx,cx16:qemu64,+sse2,+cx16; 5:AMD Opteron G3:svm,sse2,nx,cx16,sse4a,misalignsse,popcnt,abm:qemu64,+sse2,+cx16,+sse4a,+misalignsse,+popcnt,+abm;'
Thanks for your help!
This host is just a test setup, when (and if) we're going live the nodes will run on newer servers (now running citrix xenserver).
Can you tell me where I have to modify the config? I mean: where can I find the file I need to modify?
db, not file. table is vdc_options ovirt-engine-config utility allows you to change it via cli (not sure this key is exposed in it, I'm guessing it is not)
That did the trick (editing the ServerCPUList in de db and reloading jboss)! Thanks a lot!
participants (2)
-
Barry Kostjens -
Itamar Heim