6:05 a.m.
Hi all,
I have to move some FC storage domains from thin to preallocated. I would set the
storage domain to maintenance, convert the LUN from thin to preallocated on the array,
remove "Discard After Delete" from the advanced settings of the storage domain
and active it again. Is there anything else I need to take care of?
All the best,
Oliver
10:32 a.m.
Hi,
What do you mean by converting the LUN from thin to preallocated?
oVirt creates LVs on top of the LUNs you provide
On Wed, Jun 13, 2018 at 2:05 PM, Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I have to move some FC storage domains from thin to preallocated. I
would set the storage domain to maintenance, convert the LUN from thin to
preallocated on the array, remove “Discard After Delete” from the advanced
settings of the storage domain and active it again. Is there anything else
I need to take care of?
All the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/VUEQY5DHUC633US5HZQO3N2IQ2TVCZPX/
10:57 a.m.
New subject: Moving from thin to preallocated storage domains
Hi,
I have defined thin LUNs on the array and presented them to the oVirt hosts. I will
change the LUN from thin to preallocated on the array (which is transparent to the oVirt
host).
Besides removing “discard after delete” from the storage domain flags, is there anything
else I need to take care of on the oVirt side?
All the best,
Oliver
Von: Benny Zlotnik <bzlotnik(a)redhat.com>
Gesendet: Mittwoch, 13. Juni 2018 17:32
An: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Cc: users(a)ovirt.org
Betreff: [ovirt-users] Re: Moving from thin to preallocated storage domains
Hi,
What do you mean by converting the LUN from thin to preallocated?
oVirt creates LVs on top of the LUNs you provide
On Wed, Jun 13, 2018 at 2:05 PM, Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi all,
I have to move some FC storage domains from thin to preallocated. I would set the
storage domain to maintenance, convert the LUN from thin to preallocated on the array,
remove “Discard After Delete” from the advanced settings of the storage domain and active
it again. Is there anything else I need to take care of?
All the best,
Oliver
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VUEQY5DHUC6...
8:32 a.m.
Adding Idan
On Wed, Jun 13, 2018 at 6:57 PM, Bruckner, Simone <
simone.bruckner(a)fabasoft.com> wrote:
Hi,
I have defined thin LUNs on the array and presented them to the oVirt
hosts. I will change the LUN from thin to preallocated on the array (which
is transparent to the oVirt host).
Besides removing “discard after delete” from the storage domain flags, is
there anything else I need to take care of on the oVirt side?
All the best,
Oliver
*Von:* Benny Zlotnik <bzlotnik(a)redhat.com>
*Gesendet:* Mittwoch, 13. Juni 2018 17:32
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* users(a)ovirt.org
*Betreff:* [ovirt-users] Re: Moving from thin to preallocated storage
domains
Hi,
What do you mean by converting the LUN from thin to preallocated?
oVirt creates LVs on top of the LUNs you provide
On Wed, Jun 13, 2018 at 2:05 PM, Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I have to move some FC storage domains from thin to preallocated. I
would set the storage domain to maintenance, convert the LUN from thin to
preallocated on the array, remove “Discard After Delete” from the advanced
settings of the storage domain and active it again. Is there anything else
I need to take care of?
All the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/VUEQY5DHUC633US5HZQO3N2IQ2TVCZPX/
1:31 a.m.
Hi Oliver,
If you change your array's LUNs' to pre-allocated, this will probably
disable their discard support.
Therefore, after you switch the relevant domains to maintenance, you will
indeed need to disable their Discard After Delete flag.
Also, you will need to disable the Enable Discard flag for all of the disks
that reside on the relevant storage domains before you activate those
domains.
If you forget to disable one of these two options, you will get a warning
on the engine's log telling you that the LUNs' new properties were updated
in the DB but they caused the storage domain <sd_name> to stop supporting
the specific discard property that you forgot to take care of.
If you got any further questions, please don't hesitate to ask.
Regards,
Idan
On Thu, Jun 14, 2018 at 4:32 PM, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
Adding Idan
On Wed, Jun 13, 2018 at 6:57 PM, Bruckner, Simone <
simone.bruckner(a)fabasoft.com> wrote:
> Hi,
>
>
>
> I have defined thin LUNs on the array and presented them to the oVirt
> hosts. I will change the LUN from thin to preallocated on the array (which
> is transparent to the oVirt host).
>
>
>
> Besides removing “discard after delete” from the storage domain flags, is
> there anything else I need to take care of on the oVirt side?
>
>
>
> All the best,
>
> Oliver
>
>
>
> *Von:* Benny Zlotnik <bzlotnik(a)redhat.com>
> *Gesendet:* Mittwoch, 13. Juni 2018 17:32
> *An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
> *Cc:* users(a)ovirt.org
> *Betreff:* [ovirt-users] Re: Moving from thin to preallocated storage
> domains
>
>
>
> Hi,
>
>
>
> What do you mean by converting the LUN from thin to preallocated?
>
> oVirt creates LVs on top of the LUNs you provide
>
>
>
> On Wed, Jun 13, 2018 at 2:05 PM, Albl, Oliver <Oliver.Albl(a)fabasoft.com>
> wrote:
>
> Hi all,
>
>
>
> I have to move some FC storage domains from thin to preallocated. I
> would set the storage domain to maintenance, convert the LUN from thin to
> preallocated on the array, remove “Discard After Delete” from the advanced
> settings of the storage domain and active it again. Is there anything else
> I need to take care of?
>
>
>
> All the best,
>
> Oliver
>
>
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/communit
> y/about/community-guidelines/
> List Archives: https://lists.ovirt.org/archiv
> es/list/users(a)ovirt.org/message/VUEQY5DHUC633US5HZQO3N2IQ2TVCZPX/
>
>
>
2146
days inactive
2150
days old
4 comments
4 participants
participants (4)
-
Albl, Oliver -
Benny Zlotnik -
Bruckner, Simone -
Idan Shaby