name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical? Best regard Nicola Gentile
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
yes this works, if you do not need more functionality than cloud init can provide (I must write some patches for it, when I got the time..) Am 27.06.2014 11:18, schrieb Antoni Segura Puimedon:
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
-- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog. What you reported looks like a bug - the VM name should be the hostname and not the template name. Care to report the bug on bugzilla? Thank you, Shahar Havivi.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
----- Original Message -----
From: "Shahar Havivi" <shaharh@redhat.com> To: "Antoni Segura Puimedon" <asegurap@redhat.com> Cc: Users@ovirt.org Sent: Sunday, June 29, 2014 11:12:24 AM Subject: Re: [ovirt-users] name of virtual machine and hostname
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog.
What you reported looks like a bug - the VM name should be the hostname and not the template name.
Unless Nicola referred to the template's host name, from which the vm pool was created. It might be if the template wasn't sealed. Nicola, could you clarify what did you mean by "template name" which appears as the "host name" ? Thanks, Moti
Care to report the bug on bugzilla? Thank you, Shahar Havivi.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Good morning, sorry if I reply only now. Let me explain better. Once generated the vms, the hostname of the vms are the same of the template, but I wish it was centos-01, centos-02, etc. Is it possible? Thanks, Nicola 2014-06-29 15:43 GMT+02:00 Moti Asayag <masayag@redhat.com>:
----- Original Message -----
From: "Shahar Havivi" <shaharh@redhat.com> To: "Antoni Segura Puimedon" <asegurap@redhat.com> Cc: Users@ovirt.org Sent: Sunday, June 29, 2014 11:12:24 AM Subject: Re: [ovirt-users] name of virtual machine and hostname
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog.
What you reported looks like a bug - the VM name should be the hostname and not the template name.
Unless Nicola referred to the template's host name, from which the vm pool was created. It might be if the template wasn't sealed.
Nicola, could you clarify what did you mean by "template name" which appears as the "host name" ?
Thanks, Moti
Care to report the bug on bugzilla? Thank you, Shahar Havivi.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Wednesday, January 14, 2015 2:33:35 PM Subject: Re: [ovirt-users] name of virtual machine and hostname
Good morning, sorry if I reply only now. Let me explain better. Once generated the vms, the hostname of the vms are the same of the template, but I wish it was centos-01, centos-02, etc. Is it possible?
Yes, you can use cloud-init to set some parameters for each VM including the hostname. You should install the cloud-init rpm on your VMs (it would probably better to do it on the template one) and than you can set the parameters for each VM from 'Initial run' tab under 'Advanced option'.
Thanks, Nicola
2014-06-29 15:43 GMT+02:00 Moti Asayag <masayag@redhat.com>:
----- Original Message -----
From: "Shahar Havivi" <shaharh@redhat.com> To: "Antoni Segura Puimedon" <asegurap@redhat.com> Cc: Users@ovirt.org Sent: Sunday, June 29, 2014 11:12:24 AM Subject: Re: [ovirt-users] name of virtual machine and hostname
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog.
What you reported looks like a bug - the VM name should be the hostname and not the template name.
Unless Nicola referred to the template's host name, from which the vm pool was created. It might be if the template wasn't sealed.
Nicola, could you clarify what did you mean by "template name" which appears as the "host name" ?
Thanks, Moti
Care to report the bug on bugzilla? Thank you, Shahar Havivi.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Il 15/01/2015 10:04, Simone Tiraboschi ha scritto:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Wednesday, January 14, 2015 2:33:35 PM Subject: Re: [ovirt-users] name of virtual machine and hostname
Good morning, sorry if I reply only now. Let me explain better. Once generated the vms, the hostname of the vms are the same of the template, but I wish it was centos-01, centos-02, etc. Is it possible? Yes, you can use cloud-init to set some parameters for each VM including the hostname. You should install the cloud-init rpm on your VMs (it would probably better to do it on the template one) and than you can set the parameters for each VM from 'Initial run' tab under 'Advanced option'.
Thank you so much, I will try as soon as possible.
Thanks, Nicola
2014-06-29 15:43 GMT+02:00 Moti Asayag <masayag@redhat.com>:
----- Original Message -----
From: "Shahar Havivi" <shaharh@redhat.com> To: "Antoni Segura Puimedon" <asegurap@redhat.com> Cc: Users@ovirt.org Sent: Sunday, June 29, 2014 11:12:24 AM Subject: Re: [ovirt-users] name of virtual machine and hostname
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Friday, June 27, 2014 11:16:51 AM Subject: [ovirt-users] name of virtual machine and hostname
Good morning, I would like to ask you an information. After I have installed ovirt, I have created a pool of vm with name like centos-?? (from 1 to 20) and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc. The problem is when the vm starts the hostname is not the same of the vm name in ovirt but is the same name of the template. Is it possible to make sure that the name of vm and the hostname is identical? I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when
----- Original Message ----- the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog.
What you reported looks like a bug - the VM name should be the hostname and not the template name. Unless Nicola referred to the template's host name, from which the vm pool was created. It might be if the template wasn't sealed.
Nicola, could you clarify what did you mean by "template name" which appears as the "host name" ?
Thanks, Moti
Care to report the bug on bugzilla? Thank you, Shahar Havivi.
Best regard
Nicola Gentile _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Good morning, I tried cloud-init. I installed a package cloud-init, and everything works fine. Thank you so much for you work. Nicola 2015-01-15 11:18 GMT+01:00 nicola.gentile.to <nicola.gentile.to@gmail.com>:
Il 15/01/2015 10:04, Simone Tiraboschi ha scritto:
----- Original Message -----
From: "nicola gentile" <nicola.gentile.to@gmail.com> To: Users@ovirt.org Sent: Wednesday, January 14, 2015 2:33:35 PM Subject: Re: [ovirt-users] name of virtual machine and hostname
Good morning, sorry if I reply only now. Let me explain better. Once generated the vms, the hostname of the vms are the same of the template, but I wish it was centos-01, centos-02, etc. Is it possible?
Yes, you can use cloud-init to set some parameters for each VM including the hostname. You should install the cloud-init rpm on your VMs (it would probably better to do it on the template one) and than you can set the parameters for each VM from 'Initial run' tab under 'Advanced option'.
Thank you so much, I will try as soon as possible.
Thanks, Nicola
2014-06-29 15:43 GMT+02:00 Moti Asayag <masayag@redhat.com>:
----- Original Message -----
From: "Shahar Havivi" <shaharh@redhat.com> To: "Antoni Segura Puimedon" <asegurap@redhat.com> Cc: Users@ovirt.org Sent: Sunday, June 29, 2014 11:12:24 AM Subject: Re: [ovirt-users] name of virtual machine and hostname
On 27.06.14 05:18, Antoni Segura Puimedon wrote:
----- Original Message ----- > > From: "nicola gentile" <nicola.gentile.to@gmail.com> > To: Users@ovirt.org > Sent: Friday, June 27, 2014 11:16:51 AM > Subject: [ovirt-users] name of virtual machine and hostname > > Good morning, > I would like to ask you an information. > After I have installed ovirt, I have created a pool of vm with name > like centos-?? (from 1 to 20) > and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 > etc. > etc. > The problem is when the vm starts the hostname is not the same of the > vm name in ovirt but is the same name of the template. > Is it possible to make sure that the name of vm and the hostname is > identical?
I guess that the way to go about it would be to use the cloudinit integration. I've not tried it myself, but: http://www.ovirt.org/Features/Cloud-Init_Integration states that setting the hostname was one of the planned features when the integration was designed.
Setting the host name via cloud-init is currently supported - you can set it via the Add/Edit VM via the "Initial Run" section or try to run-once the VM and look at the same "initial Run" section. Please note that if you do Edit a VM that already run ie already initialized oVirt engine will not send the cloud-init data, you will need to use run-once dialog.
What you reported looks like a bug - the VM name should be the hostname and not the template name.
Unless Nicola referred to the template's host name, from which the vm pool was created. It might be if the template wasn't sealed.
Nicola, could you clarify what did you mean by "template name" which appears as the "host name" ?
Thanks, Moti
Care to report the bug on bugzilla? Thank you, Shahar Havivi.
> > Best regard > > Nicola Gentile > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (7)
-
Antoni Segura Puimedon -
Moti Asayag -
nicola gentile -
nicola.gentile.to
-
Shahar Havivi -
Simone Tiraboschi -
Sven Kieske