2:19 p.m.
Hello,
passing from old manual to current OVN in 4.3.1 it seems I have some
problems with OVN now.
I cannot assign network on OVN to VM (powered on or off doesn't change).
When I add//edit a vnic, they are not on the possible choices
Environment composed by three hosts and one engine (external on vSphere).
The mgmt network during time has been configured on network
named ovirtmgmntZ2Z3
On engine it seems there are 2 switches for every defined ovn network
(ovn192 and ovn172)
Below some output of commands in case any inconsistency has remained and I
can purge it.
Thanks in advance.
Gianluca
- On manager ovmgr1:
[root@ovmgr1 ~]# ovs-vsctl show
eae54ff9-b86c-4050-8241-46f44336ba94
ovs_version: "2.10.1"
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl show
switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
port affc5570-3e5a-439c-9fdf-d75d6810e3a3
addresses: ["00:1a:4a:17:01:73"]
port f639d541-2118-4c24-b478-b7a586eb170c
addresses: ["00:1a:4a:17:01:75"]
switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
port 32c348d9-12e9-4bcf-a43f-69338c887cfc
addresses: ["00:1a:4a:17:01:72 dynamic"]
port 3c77c2ea-de00-43f9-a5c5-9b3ffea5ec69
addresses: ["00:1a:4a:17:01:74 dynamic"]
switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
port 0a2a47bc-ea0d-4f1d-8f49-ec903e519983
addresses: ["00:1a:4a:17:01:65 dynamic"]
port 8fc7bed4-7663-4903-922b-05e490c6a5a1
addresses: ["00:1a:4a:17:01:64 dynamic"]
port f2b64f89-b719-484c-ac02-2a1ac8eaacdb
addresses: ["00:1a:4a:17:01:59 dynamic"]
port f7389c88-1ea1-47c2-92fd-6beffb2e2190
addresses: ["00:1a:4a:17:01:58 dynamic"]
[root@ovmgr1 ~]#
- On host ov200 (10.4.192.32 on ovirtmgmntZ2Z3):
[root@ov200 ~]# ovs-vsctl show
ae0a1256-7250-46a2-a1b6-8f0ae6105c20
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-ddecf0-0"
Interface "ovn-ddecf0-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.33"}
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
ovs_version: "2.10.1"
[root@ov200 ~]#
- On host ov300 (10.4.192.33 on ovirtmgmntZ2Z3):
[root@ov300 ~]# ovs-vsctl show
f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
ovs_version: "2.10.1"
[root@ov300 ~]#
- On host ov301 (10.4.192.34 on ovirtmgmntZ2Z3):
[root@ov301 ~]# ovs-vsctl show
3a38c5bb-0abf-493d-a2e6-345af8aedfe3
Bridge br-int
fail_mode: secure
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
Port "ovn-ddecf0-0"
Interface "ovn-ddecf0-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.33"}
Port br-int
Interface br-int
type: internal
ovs_version: "2.10.1"
[root@ov301 ~]#
In web admin gui:
In network -> networks ->
- ovn192
Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
VDSM Name: ovn192
External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
- ovn172
Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
VDSM Name: ovn172
External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
4:39 p.m.
On Mon, Mar 18, 2019 at 2:20 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
Hello,
passing from old manual to current OVN in 4.3.1 it seems I have some problems with OVN
now.
I cannot assign network on OVN to VM (powered on or off doesn't change).
When I add//edit a vnic, they are not on the possible choices
Environment composed by three hosts and one engine (external on vSphere).
The mgmt network during time has been configured on network named ovirtmgmntZ2Z3
On engine it seems there are 2 switches for every defined ovn network (ovn192 and
ovn172)
Below some output of commands in case any inconsistency has remained and I can purge it.
Thanks in advance.
I'm very confused here; you mention that on engine there are 2
switches for every ovn network, but, on your ovn-nbctl list
logical_switch output I can clearly see the 2 logical switches where
the OVN logical networks are stored. Who created those ?
Could you show us the properties of those 2 networks ? (e.g. ovn-nbctl
list logical_switch 32367d8a-460f-4447-b35a-abe9ea5187e0 & ovn-nbctl
list logical_switch 64c4c17f-cd67-4e29-939e-2b952495159f)
+Marcin Mirecki does this ring a bell? AFAIU, the ovn network names
had to be unique - until bug [0] was fixed, where the network names
would have a whole different format - e.g.
ovirt-<network_name>-<generated_uuid> .
@Gianluca Cecchi , I notice that one of your duplicate networks -
'ovn192' - has no ports attached. That makes it the perfect candidate
to be deleted, and see if it becomes 'listable' on engine. That would
help rule out the 'duplicate name' theory.
At the moment, I can't think of a better alternative. Let's see if
Marcin comes up with a better test / idea / alternative.
Also, please let us know the version of the ovirt-provider-ovn,
openvswitch-ovn-central, and openvswitch-ovn-host.
[0] - https://bugzilla.redhat.com/show_bug.cgi?id=1503577
> Gianluca
>
> - On manager ovmgr1:
>
> [root@ovmgr1 ~]# ovs-vsctl show
> eae54ff9-b86c-4050-8241-46f44336ba94
> ovs_version: "2.10.1"
> [root@ovmgr1 ~]#
>
> [root@ovmgr1 ~]# ovn-nbctl show
> switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
> port affc5570-3e5a-439c-9fdf-d75d6810e3a3
> addresses: ["00:1a:4a:17:01:73"]
> port f639d541-2118-4c24-b478-b7a586eb170c
> addresses: ["00:1a:4a:17:01:75"]
> switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
> switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
> port 32c348d9-12e9-4bcf-a43f-69338c887cfc
> addresses: ["00:1a:4a:17:01:72 dynamic"]
> port 3c77c2ea-de00-43f9-a5c5-9b3ffea5ec69
> addresses: ["00:1a:4a:17:01:74 dynamic"]
> switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
> port 0a2a47bc-ea0d-4f1d-8f49-ec903e519983
> addresses: ["00:1a:4a:17:01:65 dynamic"]
> port 8fc7bed4-7663-4903-922b-05e490c6a5a1
> addresses: ["00:1a:4a:17:01:64 dynamic"]
> port f2b64f89-b719-484c-ac02-2a1ac8eaacdb
> addresses: ["00:1a:4a:17:01:59 dynamic"]
> port f7389c88-1ea1-47c2-92fd-6beffb2e2190
> addresses: ["00:1a:4a:17:01:58 dynamic"]
> [root@ovmgr1 ~]#
>
> - On host ov200 (10.4.192.32 on ovirtmgmntZ2Z3):
> [root@ov200 ~]# ovs-vsctl show
> ae0a1256-7250-46a2-a1b6-8f0ae6105c20
> Bridge br-int
> fail_mode: secure
> Port br-int
> Interface br-int
> type: internal
> Port "ovn-ddecf0-0"
> Interface "ovn-ddecf0-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.33"}
> Port "ovn-b8872a-0"
> Interface "ovn-b8872a-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
> ovs_version: "2.10.1"
> [root@ov200 ~]#
>
> - On host ov300 (10.4.192.33 on ovirtmgmntZ2Z3):
>
> [root@ov300 ~]# ovs-vsctl show
> f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
> Bridge br-int
> fail_mode: secure
> Port br-int
> Interface br-int
> type: internal
> Port "ovn-b8872a-0"
> Interface "ovn-b8872a-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
> Port "ovn-1dce5b-0"
> Interface "ovn-1dce5b-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
> ovs_version: "2.10.1"
> [root@ov300 ~]#
>
> - On host ov301 (10.4.192.34 on ovirtmgmntZ2Z3):
> [root@ov301 ~]# ovs-vsctl show
> 3a38c5bb-0abf-493d-a2e6-345af8aedfe3
> Bridge br-int
> fail_mode: secure
> Port "ovn-1dce5b-0"
> Interface "ovn-1dce5b-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
> Port "ovn-ddecf0-0"
> Interface "ovn-ddecf0-0"
> type: geneve
> options: {csum="true", key=flow,
remote_ip="10.4.192.33"}
> Port br-int
> Interface br-int
> type: internal
> ovs_version: "2.10.1"
> [root@ov301 ~]#
>
> In web admin gui:
>
> In network -> networks ->
> - ovn192
> Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
> VDSM Name: ovn192
> External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
>
> - ovn172
> Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
> VDSM Name: ovn172
> External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
>
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/W6U4XJHNMYM...
5:07 p.m.
On Mon, Mar 18, 2019 at 4:40 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
On Mon, Mar 18, 2019 at 2:20 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
>
> Hello,
> passing from old manual to current OVN in 4.3.1 it seems I have some
problems with OVN now.
> I cannot assign network on OVN to VM (powered on or off doesn't change).
> When I add//edit a vnic, they are not on the possible choices
> Environment composed by three hosts and one engine (external on vSphere).
> The mgmt network during time has been configured on network named
ovirtmgmntZ2Z3
> On engine it seems there are 2 switches for every defined ovn network
(ovn192 and ovn172)
> Below some output of commands in case any inconsistency has remained and
I can purge it.
> Thanks in advance.
>
I'm very confused here; you mention that on engine there are 2
switches for every ovn network, but, on your ovn-nbctl list
logical_switch output I can clearly see the 2 logical switches where
the OVN logical networks are stored. Who created those ?
I think it could be related to the situation described here (it is the same
environment, in the meantime updated also from 4.2.8 to 4.3.1) and previous
configuration not backed up at that time:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/32S5L4JKHGP...
and some steps not done correctly by me.
After following indications, I tried to import ovn but probably I did it
wrong.
Could you show us the properties of those 2 networks ? (e.g. ovn-nbctl
list logical_switch 32367d8a-460f-4447-b35a-abe9ea5187e0 & ovn-nbctl
list logical_switch 64c4c17f-cd67-4e29-939e-2b952495159f)
[root@ovmgr1 ~]# ovn-nbctl list logical_switch
32367d8a-460f-4447-b35a-abe9ea5187e0
_uuid : 32367d8a-460f-4447-b35a-abe9ea5187e0
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn192"
other_config : {subnet="192.168.10.0/24"}
ports : [affc5570-3e5a-439c-9fdf-d75d6810e3a3,
f639d541-2118-4c24-b478-b7a586eb170c]
qos_rules : []
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl list logical_switch
64c4c17f-cd67-4e29-939e-2b952495159f
_uuid : 64c4c17f-cd67-4e29-939e-2b952495159f
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn172"
other_config : {subnet="172.16.10.0/24"}
ports : [32c348d9-12e9-4bcf-a43f-69338c887cfc,
3c77c2ea-de00-43f9-a5c5-9b3ffea5ec69]
qos_rules : []
[root@ovmgr1 ~]#
@Gianluca Cecchi , I notice that one of your duplicate networks -
'ovn192' - has no ports attached. That makes it the perfect candidate
to be deleted, and see if it becomes 'listable' on engine. That would
help rule out the 'duplicate name' theory.
I can try. Can you give me the command to be run?
It is a test oVirt so It would be not a big problem in case of failures in
this respect.
At the moment, I can't think of a better alternative. Let's
see if
Marcin comes up with a better test / idea / alternative.
Also, please let us know the version of the ovirt-provider-ovn,
openvswitch-ovn-central, and openvswitch-ovn-host.
On engine:
[root@ovmgr1 ~]# rpm -q ovirt-provider-ovn openvswitch-ovn-central
openvswitch-ovn-host
ovirt-provider-ovn-1.2.20-1.el7.noarch
openvswitch-ovn-central-2.10.1-3.el7.x86_64
package openvswitch-ovn-host is not installed
[root@ovmgr1 ~]#
On the 3 hosts I only have this package installed:
openvswitch-ovn-host-2.10.1-3.el7.x86_64
Thanks
Gianluca
9:37 a.m.
On Mon, Mar 18, 2019 at 5:08 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Mon, Mar 18, 2019 at 4:40 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
> On Mon, Mar 18, 2019 at 2:20 PM Gianluca Cecchi
> <gianluca.cecchi(a)gmail.com> wrote:
> >
> > Hello,
> > passing from old manual to current OVN in 4.3.1 it seems I have some
> problems with OVN now.
> > I cannot assign network on OVN to VM (powered on or off doesn't change).
> > When I add//edit a vnic, they are not on the possible choices
> > Environment composed by three hosts and one engine (external on
> vSphere).
> > The mgmt network during time has been configured on network named
> ovirtmgmntZ2Z3
> > On engine it seems there are 2 switches for every defined ovn network
> (ovn192 and ovn172)
> > Below some output of commands in case any inconsistency has remained
> and I can purge it.
> > Thanks in advance.
> >
>
> I'm very confused here; you mention that on engine there are 2
> switches for every ovn network, but, on your ovn-nbctl list
> logical_switch output I can clearly see the 2 logical switches where
> the OVN logical networks are stored. Who created those ?
>
I think it could be related to the situation described here (it is the
same environment, in the meantime updated also from 4.2.8 to 4.3.1) and
previous configuration not backed up at that time:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/32S5L4JKHGP...
and some steps not done correctly by me.
After following indications, I tried to import ovn but probably I did it
wrong.
Is it possible that you added new networks, instead of importing the old
ones?
If so the old networks would just stay in the database, and we would have
duplicated networks like you have now.
>
> Could you show us the properties of those 2 networks ? (e.g. ovn-nbctl
> list logical_switch 32367d8a-460f-4447-b35a-abe9ea5187e0 & ovn-nbctl
> list logical_switch 64c4c17f-cd67-4e29-939e-2b952495159f)
>
>
[root@ovmgr1 ~]# ovn-nbctl list logical_switch
32367d8a-460f-4447-b35a-abe9ea5187e0
_uuid : 32367d8a-460f-4447-b35a-abe9ea5187e0
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn192"
other_config : {subnet="192.168.10.0/24"}
ports : [affc5570-3e5a-439c-9fdf-d75d6810e3a3,
f639d541-2118-4c24-b478-b7a586eb170c]
qos_rules : []
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl list logical_switch
64c4c17f-cd67-4e29-939e-2b952495159f
_uuid : 64c4c17f-cd67-4e29-939e-2b952495159f
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn172"
other_config : {subnet="172.16.10.0/24"}
ports : [32c348d9-12e9-4bcf-a43f-69338c887cfc,
3c77c2ea-de00-43f9-a5c5-9b3ffea5ec69]
qos_rules : []
[root@ovmgr1 ~]#
>
> @Gianluca Cecchi , I notice that one of your duplicate networks -
> 'ovn192' - has no ports attached. That makes it the perfect candidate
> to be deleted, and see if it becomes 'listable' on engine. That would
> help rule out the 'duplicate name' theory.
>
I can try. Can you give me the command to be run?
It is a test oVirt so It would be not a big problem in case of failures in
this respect.
> At the moment, I can't think of a better alternative. Let's see if
> Marcin comes up with a better test / idea / alternative.
>
> Also, please let us know the version of the ovirt-provider-ovn,
> openvswitch-ovn-central, and openvswitch-ovn-host.
>
On engine:
[root@ovmgr1 ~]# rpm -q ovirt-provider-ovn openvswitch-ovn-central
openvswitch-ovn-host
ovirt-provider-ovn-1.2.20-1.el7.noarch
openvswitch-ovn-central-2.10.1-3.el7.x86_64
package openvswitch-ovn-host is not installed
[root@ovmgr1 ~]#
On the 3 hosts I only have this package installed:
openvswitch-ovn-host-2.10.1-3.el7.x86_64
Thanks
Gianluca
2:16 p.m.
On Tue, Mar 19, 2019 at 9:37 AM Marcin Mirecki <mmirecki(a)redhat.com> wrote:
[snip]
I think it could be related to the situation described here (it is
the
> same environment, in the meantime updated also from 4.2.8 to 4.3.1) and
> previous configuration not backed up at that time:
>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/32S5L4JKHGP...
>
> and some steps not done correctly by me.
> After following indications, I tried to import ovn but probably I did it
> wrong.
>
Is it possible that you added new networks, instead of importing the old
ones?
If so the old networks would just stay in the database, and we would have
duplicated networks like you have now.
It could be, but I don't remember now, sorry
Gianluca
10:25 a.m.
On Mon, Mar 18, 2019 at 5:08 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Mon, Mar 18, 2019 at 4:40 PM Miguel Duarte de Mora Barroso
<mdbarroso(a)redhat.com> wrote:
>
> On Mon, Mar 18, 2019 at 2:20 PM Gianluca Cecchi
> <gianluca.cecchi(a)gmail.com> wrote:
> >
> > Hello,
> > passing from old manual to current OVN in 4.3.1 it seems I have some problems
with OVN now.
> > I cannot assign network on OVN to VM (powered on or off doesn't change).
> > When I add//edit a vnic, they are not on the possible choices
> > Environment composed by three hosts and one engine (external on vSphere).
> > The mgmt network during time has been configured on network named
ovirtmgmntZ2Z3
> > On engine it seems there are 2 switches for every defined ovn network (ovn192
and ovn172)
> > Below some output of commands in case any inconsistency has remained and I can
purge it.
> > Thanks in advance.
> >
>
> I'm very confused here; you mention that on engine there are 2
> switches for every ovn network, but, on your ovn-nbctl list
> logical_switch output I can clearly see the 2 logical switches where
> the OVN logical networks are stored. Who created those ?
I think it could be related to the situation described here (it is the same environment,
in the meantime updated also from 4.2.8 to 4.3.1) and previous configuration not backed up
at that time:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/32S5L4JKHGP...
and some steps not done correctly by me.
After following indications, I tried to import ovn but probably I did it wrong.
>
>
> Could you show us the properties of those 2 networks ? (e.g. ovn-nbctl
> list logical_switch 32367d8a-460f-4447-b35a-abe9ea5187e0 & ovn-nbctl
> list logical_switch 64c4c17f-cd67-4e29-939e-2b952495159f)
>
[root@ovmgr1 ~]# ovn-nbctl list logical_switch 32367d8a-460f-4447-b35a-abe9ea5187e0
_uuid : 32367d8a-460f-4447-b35a-abe9ea5187e0
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn192"
other_config : {subnet="192.168.10.0/24"}
ports : [affc5570-3e5a-439c-9fdf-d75d6810e3a3,
f639d541-2118-4c24-b478-b7a586eb170c]
qos_rules : []
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl list logical_switch 64c4c17f-cd67-4e29-939e-2b952495159f
_uuid : 64c4c17f-cd67-4e29-939e-2b952495159f
acls : []
dns_records : []
external_ids : {}
load_balancer : []
name : "ovn172"
other_config : {subnet="172.16.10.0/24"}
ports : [32c348d9-12e9-4bcf-a43f-69338c887cfc,
3c77c2ea-de00-43f9-a5c5-9b3ffea5ec69]
qos_rules : []
[root@ovmgr1 ~]#
>
>
> @Gianluca Cecchi , I notice that one of your duplicate networks -
> 'ovn192' - has no ports attached. That makes it the perfect candidate
> to be deleted, and see if it becomes 'listable' on engine. That would
> help rule out the 'duplicate name' theory.
I can try. Can you give me the command to be run?
It is a test oVirt so It would be not a big problem in case of failures in this respect.
You can delete it via the UI; just be sure to delete the one without
ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
It will ask you if you also want to delete it from the external
provider, say yes.
>
>>
>> At the moment, I can't think of a better alternative. Let's see if
>> Marcin comes up with a better test / idea / alternative.
>>
>> Also, please let us know the version of the ovirt-provider-ovn,
>> openvswitch-ovn-central, and openvswitch-ovn-host.
>
>
> On engine:
> [root@ovmgr1 ~]# rpm -q ovirt-provider-ovn openvswitch-ovn-central
openvswitch-ovn-host
> ovirt-provider-ovn-1.2.20-1.el7.noarch
> openvswitch-ovn-central-2.10.1-3.el7.x86_64
> package openvswitch-ovn-host is not installed
> [root@ovmgr1 ~]#
>
> On the 3 hosts I only have this package installed:
> openvswitch-ovn-host-2.10.1-3.el7.x86_64
>
> Thanks
> Gianluca
2:15 p.m.
On Tue, Mar 19, 2019 at 10:25 AM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
>>
>>
>> @Gianluca Cecchi , I notice that one of your duplicate networks -
>> 'ovn192' - has no ports attached. That makes it the perfect candidate
>> to be deleted, and see if it becomes 'listable' on engine. That would
>> help rule out the 'duplicate name' theory.
>
>
> I can try. Can you give me the command to be run?
> It is a test oVirt so It would be not a big problem in case of failures
in this respect.
You can delete it via the UI; just be sure to delete the one without
ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
It will ask you if you also want to delete it from the external
provider, say yes.
Inside the GUI I see only one ovn192 network and one ovn172 network and
their external ids don't match the ones without ports...
- ovn192
Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
- ovn172
Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
So I think I have to delete from command line
Gianluca Cecchi
2:51 p.m.
On Tue, Mar 19, 2019 at 2:15 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Tue, Mar 19, 2019 at 10:25 AM Miguel Duarte de Mora Barroso
<mdbarroso(a)redhat.com> wrote:
>
> >>
> >>
> >> @Gianluca Cecchi , I notice that one of your duplicate networks -
> >> 'ovn192' - has no ports attached. That makes it the perfect
candidate
> >> to be deleted, and see if it becomes 'listable' on engine. That
would
> >> help rule out the 'duplicate name' theory.
> >
> >
> > I can try. Can you give me the command to be run?
> > It is a test oVirt so It would be not a big problem in case of failures in this
respect.
>
> You can delete it via the UI; just be sure to delete the one without
> ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
>
> It will ask you if you also want to delete it from the external
> provider, say yes.
Inside the GUI I see only one ovn192 network and one ovn172 network and their external
ids don't match the ones without ports...
- ovn192
Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
- ovn172
Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
So I think I have to delete from command line
Check pastebin [0], with it you can safely delete those 2 networks.
Last course of action would be to delete via ovn-nbctl - e.g.
ovn-nbctl destroy logical_switch <network_id> - but hopefully it won't
come to that.
[0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
>
> Gianluca Cecchi
>
3:09 p.m.
On Tue, Mar 19, 2019 at 2:51 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
On Tue, Mar 19, 2019 at 2:15 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
>
> On Tue, Mar 19, 2019 at 10:25 AM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
>>
>> >>
>> >>
>> >> @Gianluca Cecchi , I notice that one of your duplicate networks -
>> >> 'ovn192' - has no ports attached. That makes it the perfect
candidate
>> >> to be deleted, and see if it becomes 'listable' on engine. That
would
>> >> help rule out the 'duplicate name' theory.
>> >
>> >
>> > I can try. Can you give me the command to be run?
>> > It is a test oVirt so It would be not a big problem in case of
failures in this respect.
>>
>> You can delete it via the UI; just be sure to delete the one without
>> ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
>>
>> It will ask you if you also want to delete it from the external
>> provider, say yes.
>
>
>
> Inside the GUI I see only one ovn192 network and one ovn172 network and
their external ids don't match the ones without ports...
>
> - ovn192
> Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
> External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
>
> - ovn172
> Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
> External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
>
> So I think I have to delete from command line
Check pastebin [0], with it you can safely delete those 2 networks.
Last course of action would be to delete via ovn-nbctl - e.g.
ovn-nbctl destroy logical_switch <network_id> - but hopefully it won't
come to that.
[0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
>
> Gianluca Cecchi
>
I get this error from the first part where I should get the token id
{
"error": {
"message": "No JSON object could be decoded",
"code": 400,
"title": "Bad Request"
}
}
In your command there is:
-H 'Postman-Token: 87fa50fd-0d06-497d-b2ac-b66b78ad90b8' \
what is that sequence? where did you get it?
Also, inside the credential section
"username": XXXX,
"password": YYY
do I have to put my username and password inside single/double quotes or
nothing?
eg admin@internal or "admin@internal" or what?
Thanks,
Gianluca
4:31 p.m.
On Tue, Mar 19, 2019 at 3:09 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Tue, Mar 19, 2019 at 2:51 PM Miguel Duarte de Mora Barroso
<mdbarroso(a)redhat.com> wrote:
>
> On Tue, Mar 19, 2019 at 2:15 PM Gianluca Cecchi
> <gianluca.cecchi(a)gmail.com> wrote:
> >
> > On Tue, Mar 19, 2019 at 10:25 AM Miguel Duarte de Mora Barroso
<mdbarroso(a)redhat.com> wrote:
> >>
> >> >>
> >> >>
> >> >> @Gianluca Cecchi , I notice that one of your duplicate networks -
> >> >> 'ovn192' - has no ports attached. That makes it the
perfect candidate
> >> >> to be deleted, and see if it becomes 'listable' on engine.
That would
> >> >> help rule out the 'duplicate name' theory.
> >> >
> >> >
> >> > I can try. Can you give me the command to be run?
> >> > It is a test oVirt so It would be not a big problem in case of failures
in this respect.
> >>
> >> You can delete it via the UI; just be sure to delete the one without
> >> ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
> >>
> >> It will ask you if you also want to delete it from the external
> >> provider, say yes.
> >
> >
> >
> > Inside the GUI I see only one ovn192 network and one ovn172 network and their
external ids don't match the ones without ports...
> >
> > - ovn192
> > Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
> > External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
> >
> > - ovn172
> > Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
> > External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
> >
> > So I think I have to delete from command line
>
> Check pastebin [0], with it you can safely delete those 2 networks.
> Last course of action would be to delete via ovn-nbctl - e.g.
> ovn-nbctl destroy logical_switch <network_id> - but hopefully it won't
> come to that.
>
> [0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
>
> >
> > Gianluca Cecchi
> >
I get this error from the first part where I should get the token id
{
"error": {
"message": "No JSON object could be decoded",
"code": 400,
"title": "Bad Request"
}
}
In your command there is:
-H 'Postman-Token: 87fa50fd-0d06-497d-b2ac-b66b78ad90b8' \
Remove that, sorry for not noticing it before. Also get rid of the
'Cache-Control: no-cache' header.
The request thus becomes:
curl -k -X POST \
https://localhost:35357/v2.0/tokens \
-H 'Content-Type: application/json' \
-d '{
"auth": {
"passwordCredentials": {
"username": <your_username@your_domain>,
"password": <your_password>
}
}
}
'
what is that sequence? where did you get it?
Also, inside the credential section
"username": XXXX,
"password": YYY
do I have to put my username and password inside single/double quotes or nothing?
eg admin@internal or "admin@internal" or what?
Between quotes - e.g. "admin@internal" and
"whatever-password-you-have".
> Thanks,
> Gianluca
>
>
>
4:44 p.m.
On Tue, Mar 19, 2019 at 4:31 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
[snip]
>> >> >> @Gianluca Cecchi , I notice that one of
your duplicate networks -
>> >> >> 'ovn192' - has no ports attached. That makes it the
perfect
candidate
>> >> >> to be deleted, and see if it becomes 'listable' on
engine. That
would
>> >> >> help rule out the 'duplicate name' theory.
>> >> >
>> >> >
>> >> > I can try. Can you give me the command to be run?
>> >> > It is a test oVirt so It would be not a big problem in case of
failures in this respect.
>> >>
>> >> You can delete it via the UI; just be sure to delete the one without
>> >> ports - it's external ID is 6110649a-db2b-4de7-8fbc-601095cfe510.
>> >>
>> >> It will ask you if you also want to delete it from the external
>> >> provider, say yes.
>> >
>> >
>> >
>> > Inside the GUI I see only one ovn192 network and one ovn172 network
and their external ids don't match the ones without ports...
>> >
>> > - ovn192
>> > Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
>> > External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
>> >
>> > - ovn172
>> > Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
>> > External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
>> >
>> > So I think I have to delete from command line
>>
>> Check pastebin [0], with it you can safely delete those 2 networks.
>> Last course of action would be to delete via ovn-nbctl - e.g.
>> ovn-nbctl destroy logical_switch <network_id> - but hopefully it
won't
>> come to that.
>>
>> [0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
>>
I get "not found" for both:
[root@ovmgr1 ~]# curl -k -X DELETE '
https://localhost:9696/v2/networks/6110649a-db2b-4de7-8fbc-601095cfe510'
-H 'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{
"error": {
"message": "Cannot find Logical_Switch with
name=6110649a-db2b-4de7-8fbc-601095cfe510",
"code": 404,
"title": "Not Found"
}
}
[root@ovmgr1 ~]# curl -k -X DELETE '
https://localhost:9696/v2/networks/8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5'
-H 'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{
"error": {
"message": "Cannot find Logical_Switch with
name=8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5",
"code": 404,
"title": "Not Found"
}
}
[root@ovmgr1 ~]#
Is there a command to get the supposed list?
Thanks for your help.
I'm also available to completely reset the OVN config if there is a way for
it...
Gianluca
4:58 p.m.
On Tue, Mar 19, 2019 at 4:44 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Tue, Mar 19, 2019 at 4:31 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
[snip]
> >> >> >> @Gianluca Cecchi , I notice that one of your duplicate
networks -
> >> >> >> 'ovn192' - has no ports attached. That makes it
the perfect
> candidate
> >> >> >> to be deleted, and see if it becomes 'listable' on
engine. That
> would
> >> >> >> help rule out the 'duplicate name' theory.
> >> >> >
> >> >> >
> >> >> > I can try. Can you give me the command to be run?
> >> >> > It is a test oVirt so It would be not a big problem in case
of
> failures in this respect.
> >> >>
> >> >> You can delete it via the UI; just be sure to delete the one
without
> >> >> ports - it's external ID is
6110649a-db2b-4de7-8fbc-601095cfe510.
> >> >>
> >> >> It will ask you if you also want to delete it from the external
> >> >> provider, say yes.
> >> >
> >> >
> >> >
> >> > Inside the GUI I see only one ovn192 network and one ovn172 network
> and their external ids don't match the ones without ports...
> >> >
> >> > - ovn192
> >> > Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
> >> > External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
> >> >
> >> > - ovn172
> >> > Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
> >> > External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
> >> >
> >> > So I think I have to delete from command line
> >>
> >> Check pastebin [0], with it you can safely delete those 2 networks.
> >> Last course of action would be to delete via ovn-nbctl - e.g.
> >> ovn-nbctl destroy logical_switch <network_id> - but hopefully it
won't
> >> come to that.
> >>
> >> [0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
> >>
>
>
I get "not found" for both:
[root@ovmgr1 ~]# curl -k -X DELETE '
https://localhost:9696/v2/networks/6110649a-db2b-4de7-8fbc-601095cfe510'
-H 'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{
"error": {
"message": "Cannot find Logical_Switch with
name=6110649a-db2b-4de7-8fbc-601095cfe510",
"code": 404,
"title": "Not Found"
}
}
[root@ovmgr1 ~]# curl -k -X DELETE '
https://localhost:9696/v2/networks/8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5'
-H 'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{
"error": {
"message": "Cannot find Logical_Switch with
name=8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5",
"code": 404,
"title": "Not Found"
}
}
[root@ovmgr1 ~]#
Is there a command to get the supposed list?
Thanks for your help.
I'm also available to completely reset the OVN config if there is a way
for it...
Gianluca
A GET call outputs this information :
[root@ovmgr1 ~]# curl -k -X GET 'https://localhost:9696/v2/networks' -H
'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{"networks": [{"status": "ACTIVE", "name":
"ovn172", "tenant_id":
"00000000000000000000000000000001", "mtu": 1442,
"port_security_enabled":
false, "id": "64c4c17f-cd67-4e29-939e-2b952495159f"},
{"status": "ACTIVE",
"name": "ovn172", "tenant_id":
"00000000000000000000000000000001", "mtu":
1442, "port_security_enabled": false, "id":
"04501f6b-3977-4ba1-9ead-7096768d796d"}, {"status":
"ACTIVE", "name":
"ovn192", "tenant_id": "00000000000000000000000000000001",
"mtu": 1442,
"port_security_enabled": false, "id":
"32367d8a-460f-4447-b35a-abe9ea5187e0"}]}[root@ovmgr1 ~]#
[root@ovmgr1 ~]#
1:26 p.m.
Looking at the original state we had:
switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
In the output of GET, 6110649a-db2b-4de7-8fbc-601095cfe510 is not longer
there, so it has been deleted.
Did you maybe try to submit the request twice?
About 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5. There was never a network with
that id, so this is correct.
Also note that to delete a network you will first have to delete its ports.
On Tue, Mar 19, 2019 at 4:58 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Tue, Mar 19, 2019 at 4:44 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
> On Tue, Mar 19, 2019 at 4:31 PM Miguel Duarte de Mora Barroso <
> mdbarroso(a)redhat.com> wrote:
>
> [snip]
>
>
>> >> >> >> @Gianluca Cecchi , I notice that one of your duplicate
networks
>> -
>> >> >> >> 'ovn192' - has no ports attached. That makes
it the perfect
>> candidate
>> >> >> >> to be deleted, and see if it becomes
'listable' on engine. That
>> would
>> >> >> >> help rule out the 'duplicate name' theory.
>> >> >> >
>> >> >> >
>> >> >> > I can try. Can you give me the command to be run?
>> >> >> > It is a test oVirt so It would be not a big problem in
case of
>> failures in this respect.
>> >> >>
>> >> >> You can delete it via the UI; just be sure to delete the one
>> without
>> >> >> ports - it's external ID is
6110649a-db2b-4de7-8fbc-601095cfe510.
>> >> >>
>> >> >> It will ask you if you also want to delete it from the
external
>> >> >> provider, say yes.
>> >> >
>> >> >
>> >> >
>> >> > Inside the GUI I see only one ovn192 network and one ovn172
network
>> and their external ids don't match the ones without ports...
>> >> >
>> >> > - ovn192
>> >> > Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
>> >> > External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
>> >> >
>> >> > - ovn172
>> >> > Id: 7546d5d3-a0e3-40d5-9d22-cf355da47d3a
>> >> > External ID: 64c4c17f-cd67-4e29-939e-2b952495159f
>> >> >
>> >> > So I think I have to delete from command line
>> >>
>> >> Check pastebin [0], with it you can safely delete those 2 networks.
>> >> Last course of action would be to delete via ovn-nbctl - e.g.
>> >> ovn-nbctl destroy logical_switch <network_id> - but hopefully it
won't
>> >> come to that.
>> >>
>> >> [0] - https://paste.fedoraproject.org/paste/mxVUEJZWxG-QHX0mJO1VhA
>> >>
>>
>>
> I get "not found" for both:
>
> [root@ovmgr1 ~]# curl -k -X DELETE '
> https://localhost:9696/v2/networks/6110649a-db2b-4de7-8fbc-601095cfe510'
> -H 'X-Auth-Token:
>
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
> {
> "error": {
> "message": "Cannot find Logical_Switch with
> name=6110649a-db2b-4de7-8fbc-601095cfe510",
> "code": 404,
> "title": "Not Found"
> }
> }
> [root@ovmgr1 ~]# curl -k -X DELETE '
> https://localhost:9696/v2/networks/8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5'
> -H 'X-Auth-Token:
>
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
> {
> "error": {
> "message": "Cannot find Logical_Switch with
> name=8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5",
> "code": 404,
> "title": "Not Found"
> }
> }
> [root@ovmgr1 ~]#
>
> Is there a command to get the supposed list?
>
> Thanks for your help.
> I'm also available to completely reset the OVN config if there is a way
> for it...
>
> Gianluca
>
A GET call outputs this information :
[root@ovmgr1 ~]# curl -k -X GET 'https://localhost:9696/v2/networks' -H
'X-Auth-Token:
WyutJuakjpSzJ4nj7drptpDfbAb3sKcZWvhF3NqRVXRyUpIHz9QGG_ZeeLi7u7trv7Er2D3vAcSX9LIFpXzz7w'
{"networks": [{"status": "ACTIVE", "name":
"ovn172", "tenant_id":
"00000000000000000000000000000001", "mtu": 1442,
"port_security_enabled":
false, "id": "64c4c17f-cd67-4e29-939e-2b952495159f"},
{"status": "ACTIVE",
"name": "ovn172", "tenant_id":
"00000000000000000000000000000001", "mtu":
1442, "port_security_enabled": false, "id":
"04501f6b-3977-4ba1-9ead-7096768d796d"}, {"status":
"ACTIVE", "name":
"ovn192", "tenant_id": "00000000000000000000000000000001",
"mtu": 1442,
"port_security_enabled": false, "id":
"32367d8a-460f-4447-b35a-abe9ea5187e0"}]}[root@ovmgr1 ~]#
[root@ovmgr1 ~]#
2:09 p.m.
On Wed, Mar 20, 2019 at 1:26 PM Marcin Mirecki <mmirecki(a)redhat.com> wrote:
Looking at the original state we had:
switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
In the output of GET, 6110649a-db2b-4de7-8fbc-601095cfe510 is not longer
there, so it has been deleted.
Did you maybe try to submit the request twice?
With that switch, as it had no ports attached, I tried the command line
option with:
ovn-nbctl destroy logical_switch 6110649a-db2b-4de7-8fbc-601095cfe510
About 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5. There was never a network
with that id, so this is correct.
Yes, but that was the id provided by web admin gui for the network....
- ovn192
Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
or did I misunderstood?
Also note that to delete a network you will first have to delete its ports.
OK.
Is there a command to clean all so that I can restart with a new OVN setup
in this infra?
I think I messed up too many things on it....
Thanks,
Gianluca
9:30 a.m.
On Wed, Mar 20, 2019 at 2:09 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Wed, Mar 20, 2019 at 1:26 PM Marcin Mirecki
<mmirecki(a)redhat.com>
wrote:
> Looking at the original state we had:
> switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
> switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
> switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
> switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
>
> In the output of GET, 6110649a-db2b-4de7-8fbc-601095cfe510 is not longer
> there, so it has been deleted.
> Did you maybe try to submit the request twice?
>
With that switch, as it had no ports attached, I tried the command line
option with:
ovn-nbctl destroy logical_switch 6110649a-db2b-4de7-8fbc-601095cfe510
>
> About 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5. There was never a network
> with that id, so this is correct.
>
Yes, but that was the id provided by web admin gui for the network....
- ovn192
Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
or did I misunderstood?
>
> Also note that to delete a network you will first have to delete its
> ports.
>
OK.
Is there a command to clean all so that I can restart with a new OVN setup
in this infra?
I think I messed up too many things on it....
Thanks,
Gianluca
I have deleted provider from web admin gui and then on manager from command
line:
ovn-nbctl lsp-del <port_name>
for the ports defined and then
ovn-nbctl destroy logical_switch <switch_name>
for the defined switches.
Then reboot of manager.
Now I have on it:
[root@ovmgr1 ~]# ovs-vsctl show
eae54ff9-b86c-4050-8241-46f44336ba94
ovs_version: "2.10.1"
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl show
[root@ovmgr1 ~]#
and no provider and/or networks on OVN in web admin gui.
What could be the sequence to re-add an OVN provider now?
From engine-setup or from web admin gui?
Any quick tip for? Any other commands (eg at db level) to verify all
previous config is cleaned?
Thanks
Gianluca
9:42 a.m.
On Thu, Mar 21, 2019 at 9:31 AM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Wed, Mar 20, 2019 at 2:09 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com> wrote:
>
> On Wed, Mar 20, 2019 at 1:26 PM Marcin Mirecki <mmirecki(a)redhat.com> wrote:
>>
>> Looking at the original state we had:
>> switch 32367d8a-460f-4447-b35a-abe9ea5187e0 (ovn192)
>> switch 6110649a-db2b-4de7-8fbc-601095cfe510 (ovn192)
>> switch 64c4c17f-cd67-4e29-939e-2b952495159f (ovn172)
>> switch 04501f6b-3977-4ba1-9ead-7096768d796d (ovn172)
>>
>> In the output of GET, 6110649a-db2b-4de7-8fbc-601095cfe510 is not longer there,
so it has been deleted.
>> Did you maybe try to submit the request twice?
>
>
> With that switch, as it had no ports attached, I tried the command line option with:
> ovn-nbctl destroy logical_switch 6110649a-db2b-4de7-8fbc-601095cfe510
>
>
>
>>
>>
>> About 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5. There was never a network with that
id, so this is correct.
>
>
> Yes, but that was the id provided by web admin gui for the network....
> - ovn192
> Id: 8fd63a10-a2ba-4c56-a8e0-0bc8d70be8b5
> External ID: 32367d8a-460f-4447-b35a-abe9ea5187e0
>
> or did I misunderstood?
>
>
>>
>>
>> Also note that to delete a network you will first have to delete its ports.
>
>
> OK.
> Is there a command to clean all so that I can restart with a new OVN setup in this
infra?
> I think I messed up too many things on it....
>
> Thanks,
> Gianluca
>
I have deleted provider from web admin gui and then on manager from command line:
ovn-nbctl lsp-del <port_name>
for the ports defined and then
ovn-nbctl destroy logical_switch <switch_name>
for the defined switches.
Then reboot of manager.
Now I have on it:
[root@ovmgr1 ~]# ovs-vsctl show
eae54ff9-b86c-4050-8241-46f44336ba94
ovs_version: "2.10.1"
[root@ovmgr1 ~]#
[root@ovmgr1 ~]# ovn-nbctl show
[root@ovmgr1 ~]#
and no provider and/or networks on OVN in web admin gui.
What could be the sequence to re-add an OVN provider now?
From engine-setup or from web admin gui?
Through engine UI, through "Administration" -> "Providers" ->
Add
Any quick tip for? Any other commands (eg at db level) to verify all
previous config is cleaned?
+Ales Musil could you indicate how to check the network list on the
engine's DB ? A query to filter all the external networks is what
we're after.
> Thanks
> Gianluca
>
>
11:16 a.m.
On Thu, Mar 21, 2019 at 9:43 AM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
>>
>> OK.
>> Is there a command to clean all so that I can restart with a new OVN
setup in this infra?
>> I think I messed up too many things on it....
>>
>> Thanks,
>> Gianluca
>>
>
>
> I have deleted provider from web admin gui and then on manager from
command line:
>
> ovn-nbctl lsp-del <port_name>
> for the ports defined and then
> ovn-nbctl destroy logical_switch <switch_name>
> for the defined switches.
>
> Then reboot of manager.
>
> Now I have on it:
> [root@ovmgr1 ~]# ovs-vsctl show
> eae54ff9-b86c-4050-8241-46f44336ba94
> ovs_version: "2.10.1"
> [root@ovmgr1 ~]#
>
> [root@ovmgr1 ~]# ovn-nbctl show
> [root@ovmgr1 ~]#
>
> and no provider and/or networks on OVN in web admin gui.
>
> What could be the sequence to re-add an OVN provider now?
> From engine-setup or from web admin gui?
Through engine UI, through "Administration" -> "Providers" ->
Add
> Any quick tip for? Any other commands (eg at db level) to verify all
previous config is cleaned?
+Ales Musil could you indicate how to check the network list on the
engine's DB ? A query to filter all the external networks is what
we're after.
> Thanks
> Gianluca
>
>
In the mean time tested this on database, searching around tables:
engine=# select name from providers;
name
------------------------
ovirt-image-repository
(1 row)
engine=#
engine=# select
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
from network;
provider_network_provider_id | provider_network_external_id |
provider_physical_network_id
------------------------------+------------------------------+------------------------------
| |
| |
| |
| |
| |
| |
| |
| |
| |
(9 rows)
engine=# select
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
from network_view ;
provider_network_provider_id | provider_network_external_id |
provider_physical_network_id
------------------------------+------------------------------+------------------------------
| |
| |
| |
| |
| |
| |
| |
| |
| |
(9 rows)
engine=# select * from provider_binding_host_id;
vds_id | plugin_type |
binding_host_id
--------------------------------------+--------------------+--------------------------------------
8ef1ce6f-4e38-486c-b3a4-58235f1f1d06 | OVIRT_PROVIDER_OVN |
b8872ab5-4606-4a79-b77d-9d956a18d349
9001bfea-d7d8-4ae4-aeaf-14a5e2d88d77 | OVIRT_PROVIDER_OVN |
ddecf0da-4708-4f93-958b-6af365a5eeca
d16e723c-b44c-4c1c-be76-c67911e47ccd | OVIRT_PROVIDER_OVN |
1dce5b7c-a9fc-4ddb-99b4-e2c9e0fa54c5
(3 rows)
The last seems to me the configuration of my 3 hosts... do I need to clean
in any way it or can I say that it is a sort of default empty config
without any network configured?
Thanks,
Gianluca
12:39 p.m.
On Thu, Mar 21, 2019 at 11:16 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Thu, Mar 21, 2019 at 9:43 AM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
>
> >>
> >> OK.
> >> Is there a command to clean all so that I can restart with a new OVN
> setup in this infra?
> >> I think I messed up too many things on it....
> >>
> >> Thanks,
> >> Gianluca
> >>
> >
> >
> > I have deleted provider from web admin gui and then on manager from
> command line:
> >
> > ovn-nbctl lsp-del <port_name>
> > for the ports defined and then
> > ovn-nbctl destroy logical_switch <switch_name>
> > for the defined switches.
> >
> > Then reboot of manager.
> >
> > Now I have on it:
> > [root@ovmgr1 ~]# ovs-vsctl show
> > eae54ff9-b86c-4050-8241-46f44336ba94
> > ovs_version: "2.10.1"
> > [root@ovmgr1 ~]#
> >
> > [root@ovmgr1 ~]# ovn-nbctl show
> > [root@ovmgr1 ~]#
> >
> > and no provider and/or networks on OVN in web admin gui.
> >
> > What could be the sequence to re-add an OVN provider now?
> > From engine-setup or from web admin gui?
>
> Through engine UI, through "Administration" -> "Providers"
-> Add
>
> > Any quick tip for? Any other commands (eg at db level) to verify all
> previous config is cleaned?
>
> +Ales Musil could you indicate how to check the network list on the
> engine's DB ? A query to filter all the external networks is what
> we're after.
>
Hi,
simply "select * from network where provider_network_external_id is not
null" should do the trick.
> > Thanks
> > Gianluca
> >
> >
>
In the mean time tested this on database, searching around tables:
engine=# select name from providers;
name
------------------------
ovirt-image-repository
(1 row)
engine=#
engine=# select
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
from network;
provider_network_provider_id | provider_network_external_id |
provider_physical_network_id
------------------------------+------------------------------+------------------------------
| |
| |
| |
| |
| |
| |
| |
| |
| |
(9 rows)
engine=# select
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
from network_view ;
provider_network_provider_id | provider_network_external_id |
provider_physical_network_id
------------------------------+------------------------------+------------------------------
| |
| |
| |
| |
| |
| |
| |
| |
| |
(9 rows)
engine=# select * from provider_binding_host_id;
vds_id | plugin_type |
binding_host_id
--------------------------------------+--------------------+--------------------------------------
8ef1ce6f-4e38-486c-b3a4-58235f1f1d06 | OVIRT_PROVIDER_OVN |
b8872ab5-4606-4a79-b77d-9d956a18d349
9001bfea-d7d8-4ae4-aeaf-14a5e2d88d77 | OVIRT_PROVIDER_OVN |
ddecf0da-4708-4f93-958b-6af365a5eeca
d16e723c-b44c-4c1c-be76-c67911e47ccd | OVIRT_PROVIDER_OVN |
1dce5b7c-a9fc-4ddb-99b4-e2c9e0fa54c5
(3 rows)
The last seems to me the configuration of my 3 hosts... do I need to clean
in any way it or can I say that it is a sort of default empty config
without any network configured?
Thanks,
Gianluca
--
ALES MUSIL
Associate Software Engineer - rhv network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
2:04 p.m.
On Thu, Mar 21, 2019 at 12:39 PM Ales Musil <amusil(a)redhat.com> wrote:
Hi,
simply "select * from network where provider_network_external_id is not
null" should do the trick.
Thanks. As you can see one of my queries detailed no values:
engine=# select
>
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
> from network;
> provider_network_provider_id | provider_network_external_id |
> provider_physical_network_id
>
>
------------------------------+------------------------------+------------------------------
> | |
> | |
> | |
> | |
> | |
> | |
> | |
> | |
> | |
> (9 rows)
>
>
anyway:
engine=# select * from network where provider_network_external_id is not
null;
id | name | description | type | addr | subnet | gateway | vlan_id | stp |
storage_pool_id | mtu |
vm_network | provider_network_provider_id | provider_network_external_id |
free_text_comment | label
| qos_id | vdsm_name | dns_resolver_configuration_id |
provider_physical_network_id
----+------+-------------+------+------+--------+---------+---------+-----+-----------------+-----+-
-----------+------------------------------+------------------------------+-------------------+------
-+--------+-----------+-------------------------------+------------------------------
(0 rows)
engine=#
One more question. Suppose the problem caused any stale vnic on any vm,
previously atached on OVN, is there a way to see at db level?
Currently I only have 4 VMs and "network interfaces" in web admin gui
doesn't show any OVN, but I would like to crosscheck also at db level,
because I think in previous config before doing damages I has some on OVN.
Thanks,
Gianluca
3:05 p.m.
On Thu, Mar 21, 2019 at 2:04 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Thu, Mar 21, 2019 at 12:39 PM Ales Musil <amusil(a)redhat.com>
wrote:
> Hi,
> simply "select * from network where provider_network_external_id is not
> null" should do the trick.
>
>
Thanks. As you can see one of my queries detailed no values:
> engine=# select
>>
provider_network_provider_id,provider_network_external_id,provider_physical_network_id
>> from network;
>> provider_network_provider_id | provider_network_external_id |
>> provider_physical_network_id
>>
>>
------------------------------+------------------------------+------------------------------
>> | |
>> | |
>> | |
>> | |
>> | |
>> | |
>> | |
>> | |
>> | |
>> (9 rows)
>>
>>
anyway:
engine=# select * from network where provider_network_external_id is not
null;
id | name | description | type | addr | subnet | gateway | vlan_id | stp
| storage_pool_id | mtu |
vm_network | provider_network_provider_id | provider_network_external_id |
free_text_comment | label
| qos_id | vdsm_name | dns_resolver_configuration_id |
provider_physical_network_id
----+------+-------------+------+------+--------+---------+---------+-----+-----------------+-----+-
-----------+------------------------------+------------------------------+-------------------+------
-+--------+-----------+-------------------------------+------------------------------
(0 rows)
engine=#
One more question. Suppose the problem caused any stale vnic on any vm,
previously atached on OVN, is there a way to see at db level?
Currently I only have 4 VMs and "network interfaces" in web admin gui
doesn't show any OVN, but I would like to crosscheck also at db level,
because I think in previous config before doing damages I has some on OVN.
select iface.name, n.name from vm_interface as iface left join
vnic_profiles as vnic on iface.vnic_profile_id = vnic.id left join network
n on vnic.network_id = n.id where n.provider_network_external_id is not null
A bit longer but should show you the ovn network name that might be
attached to the VM.
Hopefully this helps
Thanks,
Gianluca
--
ALES MUSIL
Associate Software Engineer - rhv network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
3:07 p.m.
On Thu, Mar 21, 2019 at 3:05 PM Ales Musil <amusil(a)redhat.com> wrote:
>
> One more question. Suppose the problem caused any stale vnic on any vm,
> previously atached on OVN, is there a way to see at db level?
> Currently I only have 4 VMs and "network interfaces" in web admin gui
> doesn't show any OVN, but I would like to crosscheck also at db level,
> because I think in previous config before doing damages I has some on OVN.
>
>
select iface.name, n.name from vm_interface as iface left join
vnic_profiles as vnic on iface.vnic_profile_id = vnic.id left join
network n on vnic.network_id = n.id where n.provider_network_external_id
is not null
A bit longer but should show you the ovn network name that might be
attached to the VM.
Hopefully this helps
>
>
Output is this
name | name
------+------
(0 rows)
So I should be in the safe side, I hope.
Thanks again for insights!
Gianluca
3:46 p.m.
On Thu, Mar 21, 2019 at 3:07 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
>
>
>>
>>
Output is this
name | name
------+------
(0 rows)
So I should be in the safe side, I hope.
Thanks again for insights!
Gianluca
Any way to reset admin@internal password previously set up for OVN? When
adding provider
I get this during test:
Failed to communicate with the external provider, see log for additional
details.
and in /var/log/ovirt-provider-ovn.log
2019-03-21 15:36:52,735 root Error during SSO authentication Cannot
authenticate user 'admin@internal': Unable to log in. Verify your login
information or contact the system administrator.. : access_denied
Traceback (most recent call last):
File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", line 134,
in _handle_request
method, path_parts, content
File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", line
175, in handle_request
return self.call_response_handler(handler, content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
call_response_handler
return response_handler(content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", line
62, in post_tokens
user_password=user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
create_token
return auth.core.plugin.create_token(user_at_domain, user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
48, in create_token
timeout=self._timeout())
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
in create_token
username, password, engine_url, ca_file, timeout)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 91,
in _get_sso_token
timeout=timeout
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 55,
in wrapper
_check_for_error(response)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 181,
in _check_for_error
result['error'], details))
Unauthorized: Error during SSO authentication Cannot authenticate user
'admin@internal': Unable to log in. Verify your login information or
contact the system administrator.. : access_denied
from last setup log on Februray I see
--== PRODUCT OPTIONS ==--
Configure ovirt-provider-ovn (Yes, No) [Yes]:
. . .
(Yes, No) [No]: Yes
oVirt OVN provider user[admin@internal]:
oVirt OVN provider password:
--== STORAGE CONFIGURATION ==--
. . .
From /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf I see
# This file is automatically generated by engine-setup. Please do not edit
manually
[OVN REMOTE]
ovn-remote=ssl:127.0.0.1:6641
[SSL]
https-enabled=true
ssl-cacert-file=/etc/pki/ovirt-engine/ca.pem
ssl-cert-file=/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer
ssl-key-file=/etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass
[OVIRT]
ovirt-sso-client-secret=<my_secret_omitted>
ovirt-host=https://ovmgr1.mydomain:443
ovirt-sso-client-id=ovirt-provider-ovn
ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem
[PROVIDER]
provider-host=ovmgr1.mydomain
[root@ovmgr1 ~]# ll /etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer
-rw-r--r--. 1 root root 1953 Feb 6 15:19
/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer
[root@ovmgr1 ~]# ll /etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass
-rw-------. 1 root root 1828 Feb 6 15:19
/etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass
[root@ovmgr1 ~]#
openssl x509 -in /etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer -text
-noout
Certificate:
. . .
Validity
Not Before: Feb 5 14:19:25 2019 GMT
Not After : Jan 11 14:19:25 2024 GMT
. . .
I'm trying to add with name "MYOVN" from web admin gui: should I use
instead another name?
Gianluca
10:49 a.m.
On Thu, Mar 21, 2019 at 3:46 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
. . .
I'm trying to add with name "MYOVN" from web admin gui: should I use
instead another name?
Gianluca
Tried also this as detailed by Dominik, renewing certificates:
https://www.mail-archive.com/users@ovirt.org/msg53697.html
Not understood what to do in step
2. Use the SSO_CLIENT_SECRET from the outfile produced by the previous
command in
/etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
"Use" in which way???
I named with default "ovirt-provider-ovn" the OVN provider, after enabling
debug in OVN I get thsi when I test the connection in web admin gui
2019-03-22 10:40:41,917 root From: ::ffff:10.4.192.43:44744 Request: POST
/v2.0/tokens
2019-03-22 10:40:41,918 root Request body:
{"auth": {"passwordCredentials": {"username":
"admin@internal", "password":
"<PASSWORD_HIDDEN>"}}}
2019-03-22 10:40:41,918 auth.plugins.ovirt.sso Connecting to oVirt engine's
SSO module: https://ovmgr1.mydomain:443/ovirt-engine/sso/oauth/token
2019-03-22 10:40:41,918 auth.plugins.ovirt.sso Connecting to oVirt engine's
SSO module: https://ovmgr1.mydomain:443/ovirt-engine/sso/oauth/token
2019-03-22 10:40:41,921 urllib3.connectionpool Starting new HTTPS
connection (1): ovmgr1.mydomain
2019-03-22 10:40:46,961 urllib3.connectionpool https://ovmgr1.mydomain:443
"POST /ovirt-engine/sso/oauth/token HTTP/1.1" 400 148
2019-03-22 10:40:46,964 root From: ::ffff:10.4.192.43:44744 Request: POST
/v2.0/tokens
2019-03-22 10:40:46,964 root Request body:
{"auth": {"passwordCredentials": {"username":
"admin@internal", "password":
"<PASSWORD_HIDDEN>"}}}
2019-03-22 10:40:46,964 root Error during SSO authentication Cannot
authenticate user 'admin@internal': Unable to log in. Verify your login
information or contact the system administrator.. : access_denied
Traceback (most recent call last):
File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", line 134,
in _handle_request
method, path_parts, content
File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", line
175, in handle_request
return self.call_response_handler(handler, content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
call_response_handler
return response_handler(content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", line
62, in post_tokens
user_password=user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
create_token
return auth.core.plugin.create_token(user_at_domain, user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
48, in create_token
timeout=self._timeout())
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
in create_token
username, password, engine_url, ca_file, timeout)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 91,
in _get_sso_token
timeout=timeout
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 55,
in wrapper
_check_for_error(response)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 181,
in _check_for_error
result['error'], details))
Unauthorized: Error during SSO authentication Cannot authenticate user
'admin@internal': Unable to log in. Verify your login information or
contact the system administrator.. : access_denied
It seems I have not completely understood the link between SSO and
admin@internal as a user for OVN authentication....
Gianluca
12:20 p.m.
On Fri, 22 Mar 2019 10:49:08 +0100
Gianluca Cecchi <gianluca.cecchi(a)gmail.com> wrote:
On Thu, Mar 21, 2019 at 3:46 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com>
wrote:
>
> . . .
>
> I'm trying to add with name "MYOVN" from web admin gui: should I use
> instead another name?
>
use as <my_secret_omitted> in
[OVIRT]
ovirt-sso-client-secret=<my_secret_omitted>
Gianluca
>
>
> Tried also this as detailed by Dominik, renewing certificates:
https://www.mail-archive.com/users@ovirt.org/msg53697.html
Not understood what to do in step
2. Use the SSO_CLIENT_SECRET from the outfile produced by the previous
command in
/etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
"Use" in which way???
I named with default "ovirt-provider-ovn" the OVN provider,
after enabling
debug in OVN I get thsi when I test the connection in web admin gui
2019-03-22 10:40:41,917 root From: ::ffff:10.4.192.43:44744 Request: POST
/v2.0/tokens
2019-03-22 10:40:41,918 root Request body:
{"auth": {"passwordCredentials": {"username":
"admin@internal", "password":
"<PASSWORD_HIDDEN>"}}}
2019-03-22 10:40:41,918 auth.plugins.ovirt.sso Connecting to oVirt engine's
SSO module: https://ovmgr1.mydomain:443/ovirt-engine/sso/oauth/token
2019-03-22 10:40:41,918 auth.plugins.ovirt.sso Connecting to oVirt engine's
SSO module: https://ovmgr1.mydomain:443/ovirt-engine/sso/oauth/token
2019-03-22 10:40:41,921 urllib3.connectionpool Starting new HTTPS
connection (1): ovmgr1.mydomain
2019-03-22 10:40:46,961 urllib3.connectionpool https://ovmgr1.mydomain:443
"POST /ovirt-engine/sso/oauth/token HTTP/1.1" 400 148
2019-03-22 10:40:46,964 root From: ::ffff:10.4.192.43:44744 Request: POST
/v2.0/tokens
2019-03-22 10:40:46,964 root Request body:
{"auth": {"passwordCredentials": {"username":
"admin@internal", "password":
"<PASSWORD_HIDDEN>"}}}
2019-03-22 10:40:46,964 root Error during SSO authentication Cannot
authenticate user 'admin@internal': Unable to log in. Verify your login
information or contact the system administrator.. : access_denied
Traceback (most recent call last):
File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", line 134,
in _handle_request
method, path_parts, content
File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", line
175, in handle_request
return self.call_response_handler(handler, content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
call_response_handler
return response_handler(content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", line
62, in post_tokens
user_password=user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
create_token
return auth.core.plugin.create_token(user_at_domain, user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
48, in create_token
timeout=self._timeout())
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
in create_token
username, password, engine_url, ca_file, timeout)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 91,
in _get_sso_token
timeout=timeout
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 55,
in wrapper
_check_for_error(response)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 181,
in _check_for_error
result['error'], details))
Unauthorized: Error during SSO authentication Cannot authenticate user
'admin@internal': Unable to log in. Verify your login information or
contact the system administrator.. : access_denied
It seems I have not completely understood the link between SSO and
admin@internal as a user for OVN authentication....
The ovirt-sso-client-id and ovirt-sso-client-secret is required, to
allow the ovirt-provider-ovn to connect to Engine's SSO for checking to
user visible username, e.g. admin@internal, and password.
I guess you are already aware of the doc in
https://github.com/oVirt/ovirt-provider-ovn/#section-ovirt
ovirt-provider-ovn does not store neither the user, e.g. admin@internal
password nor the session token, it is just forwarded to Engine's SSO to
check for validity.
If you are interested in the details, the session token is generated
by _get_sso_token in
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
and validated by another method in
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
where the ovirt-sso-client-id and ovirt-sso-client-secret are
used as client_id, client_secret.
In your case _get_sso_token is already failing, which does not use the
ovirt-sso-client-secret.
To solve this praticular issue, the provider in oVirt web admin ui
should use the usual oVirt password for admin@internal.
Gianluca
2:37 p.m.
On Fri, Mar 22, 2019 at 12:20 PM Dominik Holler <dholler(a)redhat.com> wrote:
[snip]
> > Tried also this as detailed by Dominik, renewing
certificates:
> https://www.mail-archive.com/users@ovirt.org/msg53697.html
>
> Not understood what to do in step
> 2. Use the SSO_CLIENT_SECRET from the outfile produced by the previous
> command in
> /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
> "Use" in which way???
>
use as <my_secret_omitted> in
[OVIRT]
ovirt-sso-client-secret=<my_secret_omitted>
OK.
I misunderstood/misread behavior of the command
/usr/share/ovirt-engine/bin/ovirt-register-sso-client-tool.sh
I thought it directly
wrote /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
Instead it writes a temporary/transient file such as
/var/tmp/ovirt-engine/99_sso_client_1553259220210.conf
now I put the value of this generated file "SSO_CLIENT_SECRET=" inside
my 10-setup-ovirt-provider-ovn.conf and follow the other steps and I'm able
to successfully test the OVN connection
> It seems I have not completely understood the link between SSO
and
> admin@internal as a user for OVN authentication....
>
The ovirt-sso-client-id and ovirt-sso-client-secret is required, to
allow the ovirt-provider-ovn to connect to Engine's SSO for checking to
user visible username, e.g. admin@internal, and password.
I guess you are already aware of the doc in
https://github.com/oVirt/ovirt-provider-ovn/#section-ovirt
ovirt-provider-ovn does not store neither the user, e.g. admin@internal
password nor the session token, it is just forwarded to Engine's SSO to
check for validity.
If you are interested in the details, the session token is generated
by _get_sso_token in
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
and validated by another method in
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
where the ovirt-sso-client-id and ovirt-sso-client-secret are
used as client_id, client_secret.
In your case _get_sso_token is already failing, which does not use the
ovirt-sso-client-secret.
To solve this praticular issue, the provider in oVirt web admin ui
should use the usual oVirt password for admin@internal.
Thanks for all the corollary information!
Now I was also able to create two ovn networks (ovn172 and ovn192) with one
subnet each and on engine I have:
[root@ovmgr1 log]# ovn-nbctl show
switch fc2fc4e8-ff71-4ec3-ba03-536a870cd483
(ovirt-ovn192-1e252228-ade7-47c8-acda-5209be358fcf)
port 84c78095-744c-4415-805f-5f739af3d4d3
addresses: ["00:1a:4a:17:01:53 dynamic"]
switch 9e77163a-c4e4-4abf-a554-0388e6b5e4ce
(ovirt-ovn172-4ac7ba24-aad5-432d-b1d2-672eaeea7d63)
port 899809f2-3ee8-4121-9fff-5e55bb0d5d8b
addresses: ["00:1a:4a:17:01:54 dynamic"]
[root@ovmgr1 log]#
I'm now able to create/attach an ovn based nic to a VM, but if I try to
power on this VM I get an error in web admin gui
Failed to run VM p2vorasvi11
and in engine.log:
2019-03-22 14:30:34,498+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ForkJoinPool-1-worker-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM p2vorasvi11
is down with error. Exit message: Hook Error: ('',).
If I put a standard nic the VM is able to start without problem.
Full log in engine.log during startup here:
https://drive.google.com/file/d/1vDY64QaRkb8LWHJ9gD16bsJlyovISNwr/view?us...
BTW: one strange thing I see in dumped xml in engine.log during startup is:
<graphics type="spice" port="-1" autoport="yes"
passwd="*****"
passwdValidTo="1970-01-01T00:00:01" tlsPort="-1">
Gianluca
3:21 p.m.
On Fri, 22 Mar 2019 14:37:49 +0100
Gianluca Cecchi <gianluca.cecchi(a)gmail.com> wrote:
On Fri, Mar 22, 2019 at 12:20 PM Dominik Holler
<dholler(a)redhat.com> wrote:
[snip]
> > > Tried also this as detailed by Dominik, renewing certificates:
> > https://www.mail-archive.com/users@ovirt.org/msg53697.html
> >
> > Not understood what to do in step
> > 2. Use the SSO_CLIENT_SECRET from the outfile produced by the previous
> > command in
> > /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
> > "Use" in which way???
> >
>
> use as <my_secret_omitted> in
>
> [OVIRT]
> ovirt-sso-client-secret=<my_secret_omitted>
>
>
OK.
I misunderstood/misread behavior of the command
/usr/share/ovirt-engine/bin/ovirt-register-sso-client-tool.sh
I thought it directly
wrote /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
Instead it writes a temporary/transient file such as
/var/tmp/ovirt-engine/99_sso_client_1553259220210.conf
now I put the value of this generated file "SSO_CLIENT_SECRET=" inside
my 10-setup-ovirt-provider-ovn.conf and follow the other steps and I'm able
to successfully test the OVN connection
> > It seems I have not completely understood the link between SSO and
> > admin@internal as a user for OVN authentication....
> >
>
> The ovirt-sso-client-id and ovirt-sso-client-secret is required, to
> allow the ovirt-provider-ovn to connect to Engine's SSO for checking to
> user visible username, e.g. admin@internal, and password.
>
> I guess you are already aware of the doc in
> https://github.com/oVirt/ovirt-provider-ovn/#section-ovirt
>
> ovirt-provider-ovn does not store neither the user, e.g. admin@internal
> password nor the session token, it is just forwarded to Engine's SSO to
> check for validity.
>
> If you are interested in the details, the session token is generated
> by _get_sso_token in
>
>
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
> and validated by another method in
>
>
https://github.com/oVirt/ovirt-provider-ovn/blob/master/provider/auth/plu...
> where the ovirt-sso-client-id and ovirt-sso-client-secret are
> used as client_id, client_secret.
>
> In your case _get_sso_token is already failing, which does not use the
> ovirt-sso-client-secret.
>
> To solve this praticular issue, the provider in oVirt web admin ui
> should use the usual oVirt password for admin@internal.
>
>
Thanks for all the corollary information!
Now I was also able to create two ovn networks (ovn172 and ovn192) with one
subnet each and on engine I have:
[root@ovmgr1 log]# ovn-nbctl show
switch fc2fc4e8-ff71-4ec3-ba03-536a870cd483
(ovirt-ovn192-1e252228-ade7-47c8-acda-5209be358fcf)
port 84c78095-744c-4415-805f-5f739af3d4d3
addresses: ["00:1a:4a:17:01:53 dynamic"]
switch 9e77163a-c4e4-4abf-a554-0388e6b5e4ce
(ovirt-ovn172-4ac7ba24-aad5-432d-b1d2-672eaeea7d63)
port 899809f2-3ee8-4121-9fff-5e55bb0d5d8b
addresses: ["00:1a:4a:17:01:54 dynamic"]
[root@ovmgr1 log]#
I'm now able to create/attach an ovn based nic to a VM, but if I try to
power on this VM I get an error in web admin gui
Failed to run VM p2vorasvi11
and in engine.log:
2019-03-22 14:30:34,498+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ForkJoinPool-1-worker-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM p2vorasvi11
is down with error. Exit message: Hook Error: ('',).
If I put a standard nic the VM is able to start without problem.
Full log in engine.log during startup here:
https://drive.google.com/file/d/1vDY64QaRkb8LWHJ9gD16bsJlyovISNwr/view?us...
Can you please share the relevant part of vdsm.log, too?
BTW: one strange thing I see in dumped xml in engine.log during
startup is:
<graphics type="spice" port="-1" autoport="yes"
passwd="*****"
passwdValidTo="1970-01-01T00:00:01" tlsPort="-1">
Gianluca
4:14 p.m.
On Fri, Mar 22, 2019 at 3:21 PM Dominik Holler <dholler(a)redhat.com> wrote:
> I'm now able to create/attach an ovn based nic to a VM, but if I try to
> power on this VM I get an error in web admin gui
>
> Failed to run VM p2vorasvi11
>
> and in engine.log:
>
> 2019-03-22 14:30:34,498+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (ForkJoinPool-1-worker-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM p2vorasvi11
> is down with error. Exit message: Hook Error: ('',).
>
> If I put a standard nic the VM is able to start without problem.
> Full log in engine.log during startup here:
>
https://drive.google.com/file/d/1vDY64QaRkb8LWHJ9gD16bsJlyovISNwr/view?us...
>
Can you please share the relevant part of vdsm.log, too?
It seems this below regarding sudo and password required for it:
2019-03-22 14:30:30,247+0100 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC
call Host.getStats succeeded in 0.05 seconds (__init__:312)
2019-03-22 14:30:33,667+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook:
rc=1 err=Traceback (most recent call last):
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 134, in <module>
main()
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 120, in main
if not is_netdev_datapath():
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 110, in is_netdev_datapath
data, headings = list_ovs_table('bridge')
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 42, in list_ovs_table
exec_cmd('ovs-vsctl', '--format=json', 'list', table)[0]
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 36, in exec_cmd
(args, err))
RuntimeError: Failed to execute ('ovs-vsctl', '--format=json',
'list',
'bridge'), due to: ['sudo: a password is required']
(hooks:114)
2019-03-22 14:30:33,733+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/50_macspoof: rc=0 err=
(hooks:114)
2019-03-22 14:30:33,802+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/50_vmfex: rc=0 err= (hooks:114)
2019-03-22 14:30:33,803+0100 ERROR (vm/e54f8a2d) [virt.vm]
(vmId='e54f8a2d-432f-41f6-95b2-7bca3e5ebb4b') The vm start process failed
(vm:937)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in
_startUnderlyingVm
self._run()
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2842, in
_run
self._buildDomainXML(),
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2265, in
_buildDomainXML
dom, self.id, self._custom)
File "/usr/lib/python2.7/site-packages/vdsm/virt/domxml_preprocess.py",
line 243, in replace_device_xml_with_hooks_xml
dev_custom)
File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line 138,
in before_device_create
params=customProperties)
File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line 124,
in _runHooksDir
raise exception.HookError(err)
HookError: Hook Error: ('',)
10:18 p.m.
On Fri, 22 Mar 2019 16:14:59 +0100
Gianluca Cecchi <gianluca.cecchi(a)gmail.com> wrote:
On Fri, Mar 22, 2019 at 3:21 PM Dominik Holler
<dholler(a)redhat.com> wrote:
>
> > I'm now able to create/attach an ovn based nic to a VM, but if I try to
> > power on this VM I get an error in web admin gui
> >
> > Failed to run VM p2vorasvi11
> >
> > and in engine.log:
> >
> > 2019-03-22 14:30:34,498+01 ERROR
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (ForkJoinPool-1-worker-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM p2vorasvi11
> > is down with error. Exit message: Hook Error: ('',).
> >
> > If I put a standard nic the VM is able to start without problem.
> > Full log in engine.log during startup here:
> >
> https://drive.google.com/file/d/1vDY64QaRkb8LWHJ9gD16bsJlyovISNwr/view?us...
> >
>
> Can you please share the relevant part of vdsm.log, too?
>
>
>
It seems this below regarding sudo and password required for it:
2019-03-22 14:30:30,247+0100 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC
call Host.getStats succeeded in 0.05 seconds (__init__:312)
2019-03-22 14:30:33,667+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook:
rc=1 err=Traceback (most recent call last):
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 134, in <module>
main()
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 120, in main
if not is_netdev_datapath():
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 110, in is_netdev_datapath
data, headings = list_ovs_table('bridge')
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 42, in list_ovs_table
exec_cmd('ovs-vsctl', '--format=json', 'list', table)[0]
File
"/usr/libexec/vdsm/hooks/before_device_create/20_ovirt_provider_ovn_vhostuser_hook",
line 36, in exec_cmd
(args, err))
RuntimeError: Failed to execute ('ovs-vsctl', '--format=json',
'list',
'bridge'), due to: ['sudo: a password is required']
(hooks:114)
2019-03-22 14:30:33,733+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/50_macspoof: rc=0 err=
(hooks:114)
2019-03-22 14:30:33,802+0100 INFO (vm/e54f8a2d) [root]
/usr/libexec/vdsm/hooks/before_device_create/50_vmfex: rc=0 err= (hooks:114)
2019-03-22 14:30:33,803+0100 ERROR (vm/e54f8a2d) [virt.vm]
(vmId='e54f8a2d-432f-41f6-95b2-7bca3e5ebb4b') The vm start process failed
(vm:937)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in
_startUnderlyingVm
self._run()
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2842, in
_run
self._buildDomainXML(),
File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2265, in
_buildDomainXML
dom, self.id, self._custom)
File "/usr/lib/python2.7/site-packages/vdsm/virt/domxml_preprocess.py",
line 243, in replace_device_xml_with_hooks_xml
dev_custom)
File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line 138,
in before_device_create
params=customProperties)
File "/usr/lib/python2.7/site-packages/vdsm/common/hooks.py", line 124,
in _runHooksDir
raise exception.HookError(err)
HookError: Hook Error: ('',)
Thanks for raising this.
I created https://bugzilla.redhat.com/1691933 to track this.
Do you uninstalled vdsm-hook-openstacknet?
3:19 p.m.
On Fri, Mar 22, 2019 at 10:19 PM Dominik Holler <dholler(a)redhat.com> wrote:
> in _runHooksDir
> raise exception.HookError(err)
> HookError: Hook Error: ('',)
Thanks for raising this.
I created https://bugzilla.redhat.com/1691933 to track this.
Do you uninstalled vdsm-hook-openstacknet?
No.
It seems to me this package had never got installed but in 4.2.x OVN
external network provider worked.
The environment was created at beginning 2017 with 4.0.6 and then gradually
updated, now at 4.3.2.
OVN originally installed when in 4.1.0 with the manual way before official
inclusion in engine-setup
[root@ov300 ~]# rpm -q vdsm-hook-openstacknet
package vdsm-hook-openstacknet is not installed
[root@ov300 ~]#
[root@ov300 ~]# ll -rt /var/log/yum.log*
-rw-------. 1 root root 63893 Sep 29 2017 /var/log/yum.log-20180101
-rw-------. 1 root root 13840 Feb 9 2018 /var/log/yum.log-20180326
-rw-------. 1 root root 43106 Nov 22 11:47 /var/log/yum.log-20190101
-rw-------. 1 root root 38473 Mar 5 13:46 /var/log/yum.log-20190306
-rw-------. 1 root root 5018 Mar 22 14:11 /var/log/yum.log
[root@ov300 ~]#
[root@ov300 ~]# grep vdsm-hook-openstacknet /var/log/yum.log*
[root@ov300 ~]#
And the same for the other two hosts
I can confirm that if I install that package (no vdsm restart):
Installing:
vdsm-hook-openstacknet noarch
4.30.11-1.el7 ovirt-4.3 14 k
The VM with OVN network card on ovn192 is able to boot now and I have the
vnet1 interface on ov300
[root@ov300 ~]# ovs-vsctl show
f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
Port "vnet1"
Interface "vnet1"
ovs_version: "2.10.1"
[root@ov300 ~]#
[root@ovmgr1 ~]# ovn-sbctl show
Chassis "ddecf0da-4708-4f93-958b-6af365a5eeca"
hostname: "ov300.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.33"
options: {csum="true"}
Port_Binding "84c78095-744c-4415-805f-5f739af3d4d3"
Chassis "1dce5b7c-a9fc-4ddb-99b4-e2c9e0fa54c5"
hostname: "ov200.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.32"
options: {csum="true"}
Chassis "b8872ab5-4606-4a79-b77d-9d956a18d349"
hostname: "ov301.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.34"
options: {csum="true"}
[root@ovmgr1 ~]#
And on engine:
[root@ovmgr1 ~]# ovn-nbctl show
switch fc2fc4e8-ff71-4ec3-ba03-536a870cd483
(ovirt-ovn192-1e252228-ade7-47c8-acda-5209be358fcf)
port 84c78095-744c-4415-805f-5f739af3d4d3
addresses: ["00:1a:4a:17:01:53 dynamic"]
switch 9e77163a-c4e4-4abf-a554-0388e6b5e4ce
(ovirt-ovn172-4ac7ba24-aad5-432d-b1d2-672eaeea7d63)
[root@ovmgr1 ~]#
So at the end it could be a missing dependency during install of new
packages?
I have to dig a bit more, because from first tests if I start another VM on
the same ovn192 network also on the same host they are not able to
communicate
Possibly an iptables misconfiguration on host?
I have vnet1 and vnet2 on host now
[root@ov300 ~]# ovs-vsctl show
f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "vnet2"
Interface "vnet2"
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
Port "vnet1"
Interface "vnet1"
ovs_version: "2.10.1"
[root@ov300 ~]#
Thanks for the moment
Gianluca
7:44 p.m.
On Sat, 23 Mar 2019 15:19:06 +0100
Gianluca Cecchi <gianluca.cecchi(a)gmail.com> wrote:
On Fri, Mar 22, 2019 at 10:19 PM Dominik Holler
<dholler(a)redhat.com> wrote:
>
> > in _runHooksDir
> > raise exception.HookError(err)
> > HookError: Hook Error: ('',)
>
> Thanks for raising this.
> I created https://bugzilla.redhat.com/1691933 to track this.
>
> Do you uninstalled vdsm-hook-openstacknet?
>
No.
It seems to me this package had never got installed but in 4.2.x OVN
external network provider worked.
The environment was created at beginning 2017 with 4.0.6 and then gradually
updated, now at 4.3.2.
OVN originally installed when in 4.1.0 with the manual way before official
inclusion in engine-setup
[root@ov300 ~]# rpm -q vdsm-hook-openstacknet
package vdsm-hook-openstacknet is not installed
[root@ov300 ~]#
[root@ov300 ~]# ll -rt /var/log/yum.log*
-rw-------. 1 root root 63893 Sep 29 2017 /var/log/yum.log-20180101
-rw-------. 1 root root 13840 Feb 9 2018 /var/log/yum.log-20180326
-rw-------. 1 root root 43106 Nov 22 11:47 /var/log/yum.log-20190101
-rw-------. 1 root root 38473 Mar 5 13:46 /var/log/yum.log-20190306
-rw-------. 1 root root 5018 Mar 22 14:11 /var/log/yum.log
[root@ov300 ~]#
[root@ov300 ~]# grep vdsm-hook-openstacknet /var/log/yum.log*
[root@ov300 ~]#
And the same for the other two hosts
I can confirm that if I install that package (no vdsm restart):
Installing:
vdsm-hook-openstacknet noarch
4.30.11-1.el7 ovirt-4.3 14 k
The VM with OVN network card on ovn192 is able to boot now and I have the
vnet1 interface on ov300
[root@ov300 ~]# ovs-vsctl show
f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
Port "vnet1"
Interface "vnet1"
ovs_version: "2.10.1"
[root@ov300 ~]#
[root@ovmgr1 ~]# ovn-sbctl show
Chassis "ddecf0da-4708-4f93-958b-6af365a5eeca"
hostname: "ov300.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.33"
options: {csum="true"}
Port_Binding "84c78095-744c-4415-805f-5f739af3d4d3"
Chassis "1dce5b7c-a9fc-4ddb-99b4-e2c9e0fa54c5"
hostname: "ov200.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.32"
options: {csum="true"}
Chassis "b8872ab5-4606-4a79-b77d-9d956a18d349"
hostname: "ov301.datacenter.polimi.it"
Encap geneve
ip: "10.4.192.34"
options: {csum="true"}
[root@ovmgr1 ~]#
And on engine:
[root@ovmgr1 ~]# ovn-nbctl show
switch fc2fc4e8-ff71-4ec3-ba03-536a870cd483
(ovirt-ovn192-1e252228-ade7-47c8-acda-5209be358fcf)
port 84c78095-744c-4415-805f-5f739af3d4d3
addresses: ["00:1a:4a:17:01:53 dynamic"]
switch 9e77163a-c4e4-4abf-a554-0388e6b5e4ce
(ovirt-ovn172-4ac7ba24-aad5-432d-b1d2-672eaeea7d63)
[root@ovmgr1 ~]#
So at the end it could be a missing dependency during install of new
packages?
Not by intention. If vdsm-hook-openstacknet is installed, a file in
/etc/sudoers.d/ is created, which allows vdsm to call ovs-vsctl without
restricted parameters.
/etc/sudoers.d/50_vdsm_hook_ovirt_provider_ovn_hook of ovirt-provider-ovn-driver
should allow vdsm to call ovs-vsctl with all required parameters, but
it does not. This is why I created bug 1691933.
In the newer installations I checked vdsm-hook-openstacknet was
installed and hides the bug.
Maybe there are upgrade paths, which results in scenarios, where
vdsm-hook-openstacknet is not installed, which should be fine, but shows
the bug.
I have to dig a bit more, because from first tests if I start another
VM on
the same ovn192 network also on the same host they are not able to
communicate
Possibly an iptables misconfiguration on host?
Just to understand the error, would you please check if
/var/log/openvswitch/ovn-controller.log
or any other logfile in the same directory contains any hints?
Would communication using a new created ovn network without port
security enabled work?
If there are not further hints, I suggest to re-configure the
ovirt-provider-ovn-driver on the host via
vdsm-tool ovn-config OVN_Central_IP Tunneling_IP_or_Network_Name
(please find more details on
https://ovirt.org/documentation/admin-guide/chap-External_Providers.html#...
)
and check if this fixed the issue.
I have vnet1 and vnet2 on host now
[root@ov300 ~]# ovs-vsctl show
f1a41e9c-16fb-4aa2-a386-2f366ade4d3c
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "vnet2"
Interface "vnet2"
Port "ovn-b8872a-0"
Interface "ovn-b8872a-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.34"}
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.4.192.32"}
Port "vnet1"
Interface "vnet1"
ovs_version: "2.10.1"
[root@ov300 ~]#
Thanks for the moment
Gianluca
11:27 a.m.
On Sat, Mar 23, 2019 at 7:44 PM Dominik Holler <dholler(a)redhat.com> wrote:
Sorry for late reply Dominik.... busy on other (interesting at least ;-)
things
> I have to dig a bit more, because from first tests if I start another VM
on
> the same ovn192 network also on the same host they are not able to
> communicate
> Possibly an iptables misconfiguration on host?
>
Just to understand the error, would you please check if
/var/log/openvswitch/ovn-controller.log
or any other logfile in the same directory contains any hints?
It seems not
Would communication using a new created ovn network without port
security enabled work?
I confirm that if I create a new ovn with security port "Disabled" the VMs
can communicate both when running on the same host and on hosts even in
different datacenters ;-)
I unplug vnic / change ovn network of vms to match the new one / plug vnics
again and they communicate.
I unplug vnic / change ovn network of vms to the old one with port securty
enabled / plug vnics again and they don't communicate.
Questions:
- what is the role of the "Network port security" option for an OVN network?
- what is the meaning of "Undefined" option for it other than
"Enabled" and
"Disabled"?
- it seems I cannot edit the value for "Network port security" option of an
existing OVN network, is it correct?
Thanks again,
Gianluca
12:07 p.m.
On Thu, Apr 4, 2019 at 11:27 AM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Sat, Mar 23, 2019 at 7:44 PM Dominik Holler <dholler(a)redhat.com> wrote:
Sorry for late reply Dominik.... busy on other (interesting at least ;-) things
>
>
> > I have to dig a bit more, because from first tests if I start another VM on
> > the same ovn192 network also on the same host they are not able to
> > communicate
> > Possibly an iptables misconfiguration on host?
> >
>
> Just to understand the error, would you please check if
> /var/log/openvswitch/ovn-controller.log
> or any other logfile in the same directory contains any hints?
>
It seems not
>
> Would communication using a new created ovn network without port
> security enabled work?
I confirm that if I create a new ovn with security port "Disabled" the VMs can
communicate both when running on the same host and on hosts even in different datacenters
;-)
I unplug vnic / change ovn network of vms to match the new one / plug vnics again and
they communicate.
I unplug vnic / change ovn network of vms to the old one with port securty enabled / plug
vnics again and they don't communicate.
Questions:
- what is the role of the "Network port security" option for an OVN network?
It means that newly created ports under that network will inherit the
port security value from the network - e.g. if the network's port
security attribute is active, so will the newly created port's port
security.
Port security on a port means 2 things:
#1 - security group rules *will* apply to the VM having that port attached
#2 - only the specified mac address will be allowed to send/receive
through that port. MAC spoofing protection is applied.
- what is the meaning of "Undefined" option for it other
than "Enabled" and "Disabled"?
It means that the network will inherit the value from the provider's
configuration - you can check what it translates to in
/etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
- it seems I cannot edit the value for "Network port
security" option of an existing OVN network, is it correct?
You cannot do it *through the UI*. You can use ansible / REST api to
update the network - or ports - port_security_enabled value.
I am working on creating a couple of playbooks for this; hopefully I
can provide those early next week. It would be helpful to agilize this
process.
Thanks again,
Gianluca
There is a notion of 'default' group, that ensures connectivity to all
VMs whose ports belong to that group - and all ports with active port
security, by default do.
I'm not sure how you reached that situation, but let's first make sure
of a couple of things; please provider the output of:
- ovn-nbctl list logical_switch_port # this will feature info of the
port security value, and of which groups the port belongs to - the
latter in the 'external_ids' column.
- ovn-nbctl list port_group # this is where the security groups are
stored; it has associations to the ACLs belonging to the group, and of
the ports that are using it
- ovn-nbctl list address_set # this is where the IPs per group are
stored. security groups are an L3 concept.
A pastebin with the aforementioned info is welcome.
2:03 p.m.
On Thu, Apr 4, 2019 at 12:07 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
> Questions:
> - what is the role of the "Network port security" option for an OVN
network?
It means that newly created ports under that network will inherit the
port security value from the network - e.g. if the network's port
security attribute is active, so will the newly created port's port
security.
Port security on a port means 2 things:
#1 - security group rules *will* apply to the VM having that port
attached
#2 - only the specified mac address will be allowed to send/receive
through that port. MAC spoofing protection is applied.
> - what is the meaning of "Undefined" option for it other than
"Enabled"
and "Disabled"?
It means that the network will inherit the value from the provider's
configuration - you can check what it translates to in
/etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
Thanks for clarifications. Digging around RHV 4.2 vs 4.3beta docs I see now
that "Network Port Security" will be also one of the new features for it
In 4.3 beta the third option is explictly defined as "Inherited"
(reflecting your explanation) and not "Undefined" as in current oVirt 4.3.2)
> - it seems I cannot edit the value for "Network port security" option of
an existing OVN network, is it correct?
You cannot do it *through the UI*. You can use ansible / REST api to
update the network - or ports - port_security_enabled value.
I am working on creating a couple of playbooks for this; hopefully I
can provide those early next week. It would be helpful to agilize this
process.
Indeed. Because in Openstack web mgmt interface all the settings related to
security groups are simplified and intuitive, but here we have not...
Also because it seems from rhv 4.3beta manual that creation of security
groups themselves will not be possible through web gui...
There is a notion of 'default' group, that ensures
connectivity to all
VMs whose ports belong to that group - and all ports with active port
security, by default do.
I'm not sure how you reached that situation, but let's first make sure
of a couple of things; please provider the output of:
- ovn-nbctl list logical_switch_port # this will feature info of the
port security value, and of which groups the port belongs to - the
latter in the 'external_ids' column.
- ovn-nbctl list port_group # this is where the security groups are
stored; it has associations to the ACLs belonging to the group, and of
the ports that are using it
- ovn-nbctl list address_set # this is where the IPs per group are
stored. security groups are an L3 concept.
A pastebin with the aforementioned info is welcome.
See here:
https://drive.google.com/file/d/1hgXMGttMgb0oaDEy5k6aWFdb01dYsjwq/view?us...
Gianluca
9:56 a.m.
On Thu, Apr 4, 2019 at 2:04 PM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Thu, Apr 4, 2019 at 12:07 PM Miguel Duarte de Mora Barroso
<mdbarroso(a)redhat.com> wrote:
>
>
> > Questions:
> > - what is the role of the "Network port security" option for an OVN
network?
>
> It means that newly created ports under that network will inherit the
> port security value from the network - e.g. if the network's port
> security attribute is active, so will the newly created port's port
> security.
>
> Port security on a port means 2 things:
> #1 - security group rules *will* apply to the VM having that port attached
> #2 - only the specified mac address will be allowed to send/receive
> through that port. MAC spoofing protection is applied.
>
> > - what is the meaning of "Undefined" option for it other than
"Enabled" and "Disabled"?
>
> It means that the network will inherit the value from the provider's
> configuration - you can check what it translates to in
> /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
Thanks for clarifications. Digging around RHV 4.2 vs 4.3beta docs I see now that
"Network Port Security" will be also one of the new features for it
In 4.3 beta the third option is explictly defined as "Inherited" (reflecting
your explanation) and not "Undefined" as in current oVirt 4.3.2)
>
>
> > - it seems I cannot edit the value for "Network port security" option
of an existing OVN network, is it correct?
>
> You cannot do it *through the UI*. You can use ansible / REST api to
> update the network - or ports - port_security_enabled value.
>
>
> I am working on creating a couple of playbooks for this; hopefully I
> can provide those early next week. It would be helpful to agilize this
> process.
>
Indeed. Because in Openstack web mgmt interface all the settings related to security
groups are simplified and intuitive, but here we have not...
Also because it seems from rhv 4.3beta manual that creation of security groups themselves
will not be possible through web gui...
>
> There is a notion of 'default' group, that ensures connectivity to all
> VMs whose ports belong to that group - and all ports with active port
> security, by default do.
>
> I'm not sure how you reached that situation, but let's first make sure
> of a couple of things; please provider the output of:
> - ovn-nbctl list logical_switch_port # this will feature info of the
> port security value, and of which groups the port belongs to - the
> latter in the 'external_ids' column.
> - ovn-nbctl list port_group # this is where the security groups are
> stored; it has associations to the ACLs belonging to the group, and of
> the ports that are using it
> - ovn-nbctl list address_set # this is where the IPs per group are
> stored. security groups are an L3 concept.
>
> A pastebin with the aforementioned info is welcome.
See here:
https://drive.google.com/file/d/1hgXMGttMgb0oaDEy5k6aWFdb01dYsjwq/view?us...
From the data you supply, everything looks as is should: both the
ports are members of the default port group, and both their IPs are
featured in the ip4 address set.
Mind sharing the created ACLs ? (which I'm quite positive will be the
default ones, but I just have to be sure). Can be done via "ovn-nbctl
list acl" . With that I can check the ACLs assigned to the default
group, and assure they are correct.
>
> Gianluca
10:24 a.m.
On Fri, Apr 5, 2019 at 9:56 AM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
Mind sharing the created ACLs ? (which I'm quite positive will be the
default ones, but I just have to be sure). Can be done via "ovn-nbctl
list acl" . With that I can check the ACLs assigned to the default
group, and assure they are correct.
The question is: previous networks (in the sense of already existing before
the port security feature had been introduced in 4.3) seems inherited the
"Enabled" option and this prevents communication between VMs on the same
OVN network.
Is this expected?
Otherwise other people in 4.2 using OVN will have the same problem
migrating to 4.3
If I create now n 4.3.2 a new OVN based network, if I select "Create an
external provider", I get as default "ovirt-provider-ovn" as External
Provider and "Enabled" as Network Port Security. Is this expected?
Is it expected that a new OVN network with default values (Enabled port
security) is made so that by default 2 VMs don't communicate if I don't set
a special security group rule (that in tis moment requires REST api)?
As far as ACLs currently in place are concerned, here they are for my
current environment.
[root@ovmgr1 ~]# ovn-nbctl list acl
_uuid : 239f0fa4-a66e-4cce-8df2-05630f11e052
action : drop
direction : to-lport
external_ids : {description="drop all ingress ip traffic",
ovirt_port_group_id="79d3d3a0-7a57-4903-8646-f678ea53aeca"}
log : false
match : "outport == @DropAll && ip"
meter : []
name : ""
priority : 1000
severity : alert
_uuid : 141aa336-0549-47d0-b09f-c2cb0dd78dd2
action : allow-related
direction : from-lport
external_ids : {description="automatically added allow all egress ip
traffic", ovirt_ethertype="IPv4",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
log : false
match : "inport == @Default && ip4"
meter : []
name : ""
priority : 1001
severity : alert
_uuid : ac7d5a16-a596-43dc-88ec-e9d47512e7ce
action : drop
direction : from-lport
external_ids : {description="drop all egress ip traffic",
ovirt_port_group_id="79d3d3a0-7a57-4903-8646-f678ea53aeca"}
log : false
match : "inport == @DropAll && ip"
meter : []
name : ""
priority : 1000
severity : alert
_uuid : ef7f32f2-8b78-433f-a831-0e801c9d8b3e
action : allow-related
direction : to-lport
external_ids : {ovirt_ethertype="IPv4",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616",
ovirt_remote_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
log : false
match : "outport == @Default && ip4 && ip4.src ==
$pg_ip4_Default"
meter : []
name : ""
priority : 1001
severity : alert
_uuid : 70c7114b-1be6-49c1-9bbd-966c52751e79
action : allow-related
direction : from-lport
external_ids : {description="automatically added allow all egress ip
traffic", ovirt_ethertype="IPv6",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
log : false
match : "inport == @Default && ip6"
meter : []
name : ""
priority : 1001
severity : alert
_uuid : 264111cf-4f66-4b4c-b3c9-693bbca53a70
action : allow-related
direction : to-lport
external_ids : {ovirt_ethertype="IPv6",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616",
ovirt_remote_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
log : false
match : "outport == @Default && ip6 && ip6.src ==
$pg_ip6_Default"
meter : []
name : ""
priority : 1001
severity : alert
[root@ovmgr1 ~]#
Gianluca
9:27 p.m.
Hi Gianluca,
First of, sorry for the late reply, been very busy this past week.
Regarding the lack of security group support on oVirt, I agree it's unfortunate.
Please take a look at this repo [0]; you'll find playbooks to update
the port's / networks port security, security groups, and a couple of
examples on how to create new security groups and rules via ansible.
You can follow the README, it features all the information you need to
install the requirements, and use the playbooks. Comments are welcome.
You can find answers to your questions inline.
[0] - https://github.com/maiqueb/ovirt-security-groups-demo/
On Fri, Apr 5, 2019 at 10:25 AM Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> wrote:
On Fri, Apr 5, 2019 at 9:56 AM Miguel Duarte de Mora Barroso <mdbarroso(a)redhat.com>
wrote:
>
>
>
> Mind sharing the created ACLs ? (which I'm quite positive will be the
> default ones, but I just have to be sure). Can be done via "ovn-nbctl
> list acl" . With that I can check the ACLs assigned to the default
> group, and assure they are correct.
>
The question is: previous networks (in the sense of already existing before the port
security feature had been introduced in 4.3) seems inherited the "Enabled"
option and this prevents communication between VMs on the same OVN network.
Is this expected?
Previous networks are unchanged; nothing updates any of those during
the upgrade.
Now, newly created ports on existing networks *will* inherit the value
from the configuration - since the network itself doesn't have the
port security attribute set.
Can you share what's the current port-security-enabled value on your
configuration ?
(/etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf)
Otherwise other people in 4.2 using OVN will have the same problem
migrating to 4.3
If I create now n 4.3.2 a new OVN based network, if I select "Create an external
provider", I get as default "ovirt-provider-ovn" as External Provider and
"Enabled" as Network Port Security. Is this expected?
Yes.
Is it expected that a new OVN network with default values (Enabled
port security) is made so that by default 2 VMs don't communicate if I don't set a
special security group rule (that in tis moment requires REST api)?
No, the exact purpose of the default group is for the VMs to
communicate out of the box.
The ACLs you provide match all the ACLs present on the port groups
you've previously shared, and ; from my perspective, your VMs should
be able to communicate.
Could you share the output of 'ovs-ofctl dump-flows br-int' on the
ovirt node where your VMs are located ? That could indicate why the
packets are being dropped. Please provide that in a pastebin (this
email is already hard to follow).
A further question: your cluster switch type is ovs, right? This would
only matter if your VMs run in different nodes, but hey, best to get
that sorted out early.
Lastly, are your VMs able to receive an IP address via dhcp ?
>
> As far as ACLs currently in place are concerned, here they are for my current
environment.
>
> [root@ovmgr1 ~]# ovn-nbctl list acl
> _uuid : 239f0fa4-a66e-4cce-8df2-05630f11e052
> action : drop
> direction : to-lport
> external_ids : {description="drop all ingress ip traffic",
ovirt_port_group_id="79d3d3a0-7a57-4903-8646-f678ea53aeca"}
> log : false
> match : "outport == @DropAll && ip"
> meter : []
> name : ""
> priority : 1000
> severity : alert
>
> _uuid : 141aa336-0549-47d0-b09f-c2cb0dd78dd2
> action : allow-related
> direction : from-lport
> external_ids : {description="automatically added allow all egress ip
traffic", ovirt_ethertype="IPv4",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
> log : false
> match : "inport == @Default && ip4"
> meter : []
> name : ""
> priority : 1001
> severity : alert
>
> _uuid : ac7d5a16-a596-43dc-88ec-e9d47512e7ce
> action : drop
> direction : from-lport
> external_ids : {description="drop all egress ip traffic",
ovirt_port_group_id="79d3d3a0-7a57-4903-8646-f678ea53aeca"}
> log : false
> match : "inport == @DropAll && ip"
> meter : []
> name : ""
> priority : 1000
> severity : alert
>
> _uuid : ef7f32f2-8b78-433f-a831-0e801c9d8b3e
> action : allow-related
> direction : to-lport
> external_ids : {ovirt_ethertype="IPv4",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616",
ovirt_remote_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
> log : false
> match : "outport == @Default && ip4 && ip4.src ==
$pg_ip4_Default"
> meter : []
> name : ""
> priority : 1001
> severity : alert
>
> _uuid : 70c7114b-1be6-49c1-9bbd-966c52751e79
> action : allow-related
> direction : from-lport
> external_ids : {description="automatically added allow all egress ip
traffic", ovirt_ethertype="IPv6",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
> log : false
> match : "inport == @Default && ip6"
> meter : []
> name : ""
> priority : 1001
> severity : alert
>
> _uuid : 264111cf-4f66-4b4c-b3c9-693bbca53a70
> action : allow-related
> direction : to-lport
> external_ids : {ovirt_ethertype="IPv6",
ovirt_port_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616",
ovirt_remote_group_id="1fd8cacf-35cf-4aa3-b245-fec9c2e6e616"}
> log : false
> match : "outport == @Default && ip6 && ip6.src ==
$pg_ip6_Default"
> meter : []
> name : ""
> priority : 1001
> severity : alert
> [root@ovmgr1 ~]#
>
> Gianluca
8:39 a.m.
On Mon, Apr 15, 2019 at 9:27 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
Hi Gianluca,
First of, sorry for the late reply, been very busy this past week.
No problem at all Miguel.
These days I will be out of office and not able to analyze the involved
systems and reply with content, but I will do for sure next week and go and
provide feedback.
In the mean time thanks for the clarifications about expected behavior so
that I can use it as a base line to understand if there is anything wrong
or not as a first step
Cheers,
Gianluca
1858
days inactive
1887
days old
36 comments
5 participants
participants (5)
-
Ales Musil -
Dominik Holler -
Gianluca Cecchi -
Marcin Mirecki -
Miguel Duarte de Mora Barroso