Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250 We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61 There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces. Thanks in advance for any help!!! Doug
Hi Doug, What is the exact problem you are having while attempting to add a static route on the hosts? Thanks in advance, On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com> wrote:
Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below
Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250
We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61
There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces.
Thanks in advance for any help!!!
Doug _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7...
-- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com | lveyde@redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
Lev, Thanks for your response. If I attempt to manually add the route using route add: route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt This static route is refused and all traffic is routed over the default gateway. But if I use a server that doesn’t use the ovirtmgmt interface and set the same static route, the required data is routed correctly over that static route. [Count On EMC]<http://www.emcins.com/> Doug Maxfield | Senior Operating Systems Analyst EMC Insurance Companies 717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> | www.emcins.com<http://www.emcins.com/> From: Lev Veyde <lveyde@redhat.com> Sent: Tuesday, February 12, 2019 10:34 AM To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com> Cc: users <users@ovirt.org> Subject: Re: [ovirt-users] Creating a static route Hi Doug, What is the exact problem you are having while attempting to add a static route on the hosts? Thanks in advance, On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com<mailto:doug.l.maxfield@emcins.com>> wrote: Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250 We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61 There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces. Thanks in advance for any help!!! Doug _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7... -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com<mailto:lev@redhat.com> | lveyde@redhat.com<mailto:lveyde@redhat.com> [https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png]<https://red.ht/sig> TRIED. TESTED. TRUSTED.<https://redhat.com/trusted> NOTICE: This message (including any attachments) is intended for a specific individual and may contain information that is either confidential or legally protected. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete it. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Thank you. EMC071856
Hi Doug, What do you mean by "static route is refused"? What is the error message(s) you see? Can you please try to add the route with the following command: ip route add 172.22.20.31 via 172.21.12.61 If that doesn't work, then please provide more details, i.e. what is the exact error message(s) you see, the version of your OS and oVirt, output of "ip a" and "ip route" on your host(s), so that it will be easier to help you. Thanks in advance, On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield@emcins.com> wrote:
Lev,
Thanks for your response.
If I attempt to manually add the route using route add:
route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt
This static route is refused and all traffic is routed over the default gateway.
But if I use a server that doesn’t use the ovirtmgmt interface and set the same static route, the required data is routed correctly over that static route.
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde@redhat.com> *Sent:* Tuesday, February 12, 2019 10:34 AM *To:* Doug Maxfield <Doug.L.Maxfield@EMCIns.com> *Cc:* users <users@ovirt.org> *Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
What is the exact problem you are having while attempting to add a static route on the hosts?
Thanks in advance,
On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com> wrote:
Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below
Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250
We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61
There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces.
Thanks in advance for any help!!!
Doug _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7...
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
lev@redhat.com | lveyde@redhat.com
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
NOTICE: This message (including any attachments) is intended for a specific individual and may contain information that is either confidential or legally protected. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete it. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Thank you. EMC071856
-- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com | lveyde@redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
Lev, I guess “refused” is the incorrect word. If we set the static route as below, our network team can see that the traffic is not going over that interface and is going over the default interface. That’s why I used the term “refused”. I can certainly attempt to try that and let you know the results. [Count On EMC]<http://www.emcins.com/> Doug Maxfield | Senior Operating Systems Analyst EMC Insurance Companies 717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> | www.emcins.com<http://www.emcins.com/> From: Lev Veyde <lveyde@redhat.com> Sent: Tuesday, February 12, 2019 10:50 AM To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com> Cc: users <users@ovirt.org> Subject: Re: [ovirt-users] Creating a static route Hi Doug, What do you mean by "static route is refused"? What is the error message(s) you see? Can you please try to add the route with the following command: ip route add 172.22.20.31 via 172.21.12.61 If that doesn't work, then please provide more details, i.e. what is the exact error message(s) you see, the version of your OS and oVirt, output of "ip a" and "ip route" on your host(s), so that it will be easier to help you. Thanks in advance, On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield@emcins.com<mailto:Doug.L.Maxfield@emcins.com>> wrote: Lev, Thanks for your response. If I attempt to manually add the route using route add: route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt This static route is refused and all traffic is routed over the default gateway. But if I use a server that doesn’t use the ovirtmgmt interface and set the same static route, the required data is routed correctly over that static route. [Count On EMC]<http://www.emcins.com/> Doug Maxfield | Senior Operating Systems Analyst EMC Insurance Companies 717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> | www.emcins.com<http://www.emcins.com/> From: Lev Veyde <lveyde@redhat.com<mailto:lveyde@redhat.com>> Sent: Tuesday, February 12, 2019 10:34 AM To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com>> Cc: users <users@ovirt.org<mailto:users@ovirt.org>> Subject: Re: [ovirt-users] Creating a static route Hi Doug, What is the exact problem you are having while attempting to add a static route on the hosts? Thanks in advance, On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com<mailto:doug.l.maxfield@emcins.com>> wrote: Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250 We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61 There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces. Thanks in advance for any help!!! Doug _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7... -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com<mailto:lev@redhat.com> | lveyde@redhat.com<mailto:lveyde@redhat.com> [https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png]<https://red.ht/sig> TRIED. TESTED. TRUSTED.<https://redhat.com/trusted> NOTICE: This message (including any attachments) is intended for a specific individual and may contain information that is either confidential or legally protected. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete it. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Thank you. EMC071856 -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com<mailto:lev@redhat.com> | lveyde@redhat.com<mailto:lveyde@redhat.com> [https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png]<https://red.ht/sig> TRIED. TESTED. TRUSTED.<https://redhat.com/trusted>
Lev, One other question, since there are multiple enabled interfaces (ovirtmgmt and eno1), do I need to specify an interface for the route add. [Count On EMC]<http://www.emcins.com/> Doug Maxfield | Senior Operating Systems Analyst EMC Insurance Companies 717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> | www.emcins.com<http://www.emcins.com/> From: Lev Veyde <lveyde@redhat.com> Sent: Tuesday, February 12, 2019 10:50 AM To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com> Cc: users <users@ovirt.org> Subject: Re: [ovirt-users] Creating a static route Hi Doug, What do you mean by "static route is refused"? What is the error message(s) you see? Can you please try to add the route with the following command: ip route add 172.22.20.31 via 172.21.12.61 If that doesn't work, then please provide more details, i.e. what is the exact error message(s) you see, the version of your OS and oVirt, output of "ip a" and "ip route" on your host(s), so that it will be easier to help you. Thanks in advance, On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield@emcins.com<mailto:Doug.L.Maxfield@emcins.com>> wrote: Lev, Thanks for your response. If I attempt to manually add the route using route add: route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt This static route is refused and all traffic is routed over the default gateway. But if I use a server that doesn’t use the ovirtmgmt interface and set the same static route, the required data is routed correctly over that static route. [Count On EMC]<http://www.emcins.com/> Doug Maxfield | Senior Operating Systems Analyst EMC Insurance Companies 717 Mulberry St | Des Moines, IA 50265 Tel: 515.345.4507 | Fax: 866.331.1522 Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> | www.emcins.com<http://www.emcins.com/> From: Lev Veyde <lveyde@redhat.com<mailto:lveyde@redhat.com>> Sent: Tuesday, February 12, 2019 10:34 AM To: Doug Maxfield <Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com>> Cc: users <users@ovirt.org<mailto:users@ovirt.org>> Subject: Re: [ovirt-users] Creating a static route Hi Doug, What is the exact problem you are having while attempting to add a static route on the hosts? Thanks in advance, On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield@emcins.com<mailto:doug.l.maxfield@emcins.com>> wrote: Good Morning, New to oVirt. We are using this with a backup solution from Commvault. The issue that we are having is that we need to setup a static route for specific data between 2 remote sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We need to route data over a different gateway so that we don't "max out" the default network connection between the 2 sites. Example below Ovirtmgmt IP - 172.21.5.31 Gateway IP - 172.21.0.250 We need any traffic with a destination of 172.22.20.31(Remote site) to route over this gateway, 172.21.12.61 There are multiple servers in this configuration. Servers that are not using the ovirtmgmt interface for their default, we are able to route the data. The only problem is with attempting to setup a different static route on the ovirtmgmt interfaces. Thanks in advance for any help!!! Doug _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT7... -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com<mailto:lev@redhat.com> | lveyde@redhat.com<mailto:lveyde@redhat.com> [https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png]<https://red.ht/sig> TRIED. TESTED. TRUSTED.<https://redhat.com/trusted> NOTICE: This message (including any attachments) is intended for a specific individual and may contain information that is either confidential or legally protected. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete it. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Thank you. EMC071856 -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev@redhat.com<mailto:lev@redhat.com> | lveyde@redhat.com<mailto:lveyde@redhat.com> [https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png]<https://red.ht/sig> TRIED. TESTED. TRUSTED.<https://redhat.com/trusted>
participants (3)
-
Doug Maxfield -
doug.l.maxfield＠emcins.com
-
Lev Veyde