Hi all. We have an oVirt cluster in production happily running from the beginning of 2014. It started as 3.3 beta and now is Version 3.4.4-1.el6 . Shared storage provided by an HP P2000 G3 iSCSI MSA. The storage server is fully redundant (2 controllers, dual port disks, 4 iscsi connections per controller) and so is the connectivity (two switches, multiple ethernet cards per server). The two oldest server have 2 nics each; they have been configured "by hand" setting routes aimed to reach every scsi target from every nic. On the "new" server we installed ovirt 3.5 to have a look at the network configuration provided by oVirt. In Data Center -> iSCSI Multipathing we defined an iSCSI Bond binding together 3 server's nics and the 8 nics of the MSA. The result is a system that has been functioning for months. Recently we had to do an upgrade of the storage firmware. This activity uploads the firmware to one of the MSA controllers then reboots it. Being successful this is repeated on the other controller. There is an impact on the I/O performance but there should be no problems as every "volume" on the MSA remains visible on other paths. Well, that's the theory. On the two "hand configured" hosts we had no significant problems. On the 3.5 host VMs started to migrate due to storage problems then the situation got worse and it took more than an hour to bring again the system to a good operating level. I am inclined to believe that the culprit is the server's routing table. Seems to me that the oVirt generated one is too simplistic and prone to problems in case of connectivity loss (as in our situation or when you have to reboot one of the switches). Anyone on this list with strong experience on similar setup? I have included below some background information. I'm available to provide anything useful to further investigate the case. TIA, Giorgio. ------------------- context information ------------------- oVirt Compatibility Version: 3.4 two FUJITSU PRIMERGY RX300 S5 hosts CPU: Intel(R) Xeon(R) E5504 @ 2.00GHz / Intel Nehalem Family OS Version: RHEL - 6 - 6.el6.centos.12.2 Kernel Version: 2.6.32 - 504.16.2.el6.x86_64 KVM Version: 0.12.1.2 - 2.448.el6_6.2 LIBVIRT Version: libvirt-0.10.2-46.el6_6.6 VDSM Version: vdsm-4.14.17-0.el6 RAM: 40GB mom-0.4.3-1.el6.noarch.rpm ovirt-release34-1.0.3-1.noarch.rpm qemu-img-rhev-0.12.1.2-2.448.el6_6.2.x86_64.rpm qemu-kvm-rhev-0.12.1.2-2.448.el6_6.2.x86_64.rpm qemu-kvm-rhev-tools-0.12.1.2-2.448.el6_6.2.x86_64.rpm vdsm-4.14.17-0.el6.x86_64.rpm vdsm-cli-4.14.17-0.el6.noarch.rpm vdsm-hook-hostusb-4.14.17-0.el6.noarch.rpm vdsm-hook-macspoof-4.14.17-0.el6.noarch.rpm vdsm-python-4.14.17-0.el6.x86_64.rpm vdsm-python-zombiereaper-4.14.17-0.el6.noarch.rpm vdsm-xmlrpc-4.14.17-0.el6.noarch.rpm # ip route list table all |grep 192.168.126. 192.168.126.87 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.86 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.81 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.80 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.77 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.0/24 dev eth4 table 4 proto kernel scope link src 192.168.126.65 192.168.126.0/24 dev eth3 proto kernel scope link src 192.168.126.64 192.168.126.0/24 dev eth4 proto kernel scope link src 192.168.126.65 192.168.126.85 dev eth3 table 3 proto kernel scope link src 192.168.126.64 192.168.126.84 dev eth3 table 3 proto kernel scope link src 192.168.126.64 192.168.126.83 dev eth3 table 3 proto kernel scope link src 192.168.126.64 192.168.126.82 dev eth3 table 3 proto kernel scope link src 192.168.126.64 192.168.126.76 dev eth3 table 3 proto kernel scope link src 192.168.126.64 192.168.126.0/24 dev eth3 table 3 proto kernel scope link src 192.168.126.64 broadcast 192.168.126.0 dev eth3 table local proto kernel scope link src 192.168.126.64 broadcast 192.168.126.0 dev eth4 table local proto kernel scope link src 192.168.126.65 local 192.168.126.65 dev eth4 table local proto kernel scope host src 192.168.126.65 local 192.168.126.64 dev eth3 table local proto kernel scope host src 192.168.126.64 broadcast 192.168.126.255 dev eth3 table local proto kernel scope link src 192.168.126.64 broadcast 192.168.126.255 dev eth4 table local proto kernel scope link src 192.168.126.65 one HP ProLiant DL560 Gen8 host CPU: Intel(R) Xeon(R) CPU E5-4610 v2 @ 2.30GHz / Intel SandyBridge Family OS Version:RHEL - 6 - 6.el6.centos.12.2 Kernel Version: 2.6.32 - 504.16.2.el6.x86_64 KVM Version: 0.12.1.2 - 2.448.el6_6.2 LIBVIRT Version: libvirt-0.10.2-46.el6_6.6 VDSM Version: vdsm-4.16.14-0.el6 RAM: 256GB mom-0.4.3-1.el6.noarch.rpm ovirt-release35-002-1.noarch.rpm qemu-img-rhev-0.12.1.2-2.448.el6_6.2.x86_64.rpm qemu-kvm-rhev-0.12.1.2-2.448.el6_6.2.x86_64.rpm qemu-kvm-rhev-tools-0.12.1.2-2.448.el6_6.2.x86_64.rpm vdsm-4.16.14-0.el6.x86_64.rpm vdsm-cli-4.16.14-0.el6.noarch.rpm vdsm-hook-hostusb-4.16.14-0.el6.noarch.rpm vdsm-hook-macspoof-4.16.14-0.el6.noarch.rpm vdsm-jsonrpc-4.16.14-0.el6.noarch.rpm vdsm-python-4.16.14-0.el6.noarch.rpm vdsm-python-zombiereaper-4.16.14-0.el6.noarch.rpm vdsm-xmlrpc-4.16.14-0.el6.noarch.rpm vdsm-yajsonrpc-4.16.14-0.el6.noarch.rpm # ip route list table all |grep 192.168.126. 192.168.126.0/24 dev p6p1 proto kernel scope link src 192.168.126.34 192.168.126.0/24 dev p3p1 proto kernel scope link src 192.168.126.33 192.168.126.0/24 dev em3 proto kernel scope link src 192.168.126.32 local 192.168.126.32 dev em3 table local proto kernel scope host src 192.168.126.32 local 192.168.126.33 dev p3p1 table local proto kernel scope host src 192.168.126.33 broadcast 192.168.126.0 dev p6p1 table local proto kernel scope link src 192.168.126.34 broadcast 192.168.126.0 dev p3p1 table local proto kernel scope link src 192.168.126.33 broadcast 192.168.126.0 dev em3 table local proto kernel scope link src 192.168.126.32 local 192.168.126.34 dev p6p1 table local proto kernel scope host src 192.168.126.34 broadcast 192.168.126.255 dev p6p1 table local proto kernel scope link src 192.168.126.34 broadcast 192.168.126.255 dev p3p1 table local proto kernel scope link src 192.168.126.33 broadcast 192.168.126.255 dev em3 table local proto kernel scope link src 192.168.126.32