Staring cluster Hosted Engine stuck - failed liveliness check
What is the correct way to shut down a cluster ? I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:- oVirt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates. ( I realise the guide is for 3.6, surely not that different ? ) However hosted engine isn't starting now. failed liveliness check I've tried connecting from the host starting the HE vm to see what's going on with: virsh console HostedEngine I don't know what authentication it requires, tried engine admin details and root os... hosted-engine --add-console-password Enter password: no graphics devices configured unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900 What can I do next ?
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
VM Up not responding - Yes that seems to be the case. I did actually try hosted-engine --console hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null> On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com/show_bug.cgi?id=1364132 Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ovirt-hosted-eng... to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Thanks Simone, I'll give that a go this evening, I'm remote at the moment. Regards, Brett On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com/show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/ noarch/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hi Simone, I just tried to install the RPM but got a dependency issue: Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6 I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com /show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk
wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Fri, Mar 3, 2017 at 5:21 PM Maton, Brett <matonb@ltresources.co.uk> wrote:
Hi Simone,
I just tried to install the RPM but got a dependency issue:
Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6
I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges
vdsm-client is our 'next-gen' vdsClient - the CLI client to VDSM. You can and should install it in 4.1. Y.
On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com/show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ovirt-hosted-eng... to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oVirt-3.6-Cluster-... as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Ok thanks, I'll give that another go shortly On 3 March 2017 at 15:24, Yaniv Kaul <ykaul@redhat.com> wrote:
On Fri, Mar 3, 2017 at 5:21 PM Maton, Brett <matonb@ltresources.co.uk> wrote:
Hi Simone,
I just tried to install the RPM but got a dependency issue:
Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6
I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges
vdsm-client is our 'next-gen' vdsClient - the CLI client to VDSM. You can and should install it in 4.1. Y.
On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat. com/show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/ noarch/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:- oVirt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
I'm not sure why it's asking for vdsm-client >= 4.18.6 I've got the following vdsm rpms installed: vdsm-4.19.4-1.el7.centos.x86_64 vdsm-api-4.19.4-1.el7.centos.noarch vdsm-cli-4.19.4-1.el7.centos.noarch vdsm-hook-vmfex-dev-4.19.4-1.el7.centos.noarch vdsm-jsonrpc-4.19.4-1.el7.centos.noarch vdsm-python-4.19.4-1.el7.centos.noarch vdsm-xmlrpc-4.19.4-1.el7.centos.noarch vdsm-yajsonrpc-4.19.4-1.el7.centos.noarch On 3 March 2017 at 15:26, Maton, Brett <matonb@ltresources.co.uk> wrote:
Ok thanks, I'll give that another go shortly
On 3 March 2017 at 15:24, Yaniv Kaul <ykaul@redhat.com> wrote:
On Fri, Mar 3, 2017 at 5:21 PM Maton, Brett <matonb@ltresources.co.uk> wrote:
Hi Simone,
I just tried to install the RPM but got a dependency issue:
Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6
I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges
vdsm-client is our 'next-gen' vdsClient - the CLI client to VDSM. You can and should install it in 4.1. Y.
On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com /show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Il 04/Mar/2017 12:21, "Maton, Brett" <matonb@ltresources.co.uk> ha scritto: I'm not sure why it's asking for vdsm-client >= 4.18.6 I've got the following vdsm rpms installed: vdsm-4.19.4-1.el7.centos.x86_64 vdsm-api-4.19.4-1.el7.centos.noarch vdsm-cli-4.19.4-1.el7.centos.noarch vdsm-hook-vmfex-dev-4.19.4-1.el7.centos.noarch vdsm-jsonrpc-4.19.4-1.el7.centos.noarch vdsm-python-4.19.4-1.el7.centos.noarch vdsm-xmlrpc-4.19.4-1.el7.centos.noarch vdsm-yajsonrpc-4.19.4-1.el7.centos.noarch Still missing vdsm-client in the list. On 3 March 2017 at 15:26, Maton, Brett <matonb@ltresources.co.uk> wrote:
Ok thanks, I'll give that another go shortly
On 3 March 2017 at 15:24, Yaniv Kaul <ykaul@redhat.com> wrote:
On Fri, Mar 3, 2017 at 5:21 PM Maton, Brett <matonb@ltresources.co.uk> wrote:
Hi Simone,
I just tried to install the RPM but got a dependency issue:
Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6
I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges
vdsm-client is our 'next-gen' vdsClient - the CLI client to VDSM. You can and should install it in 4.1. Y.
On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com /show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk> wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Doh! I assumed vdsm-client was part of vdsm-cli, installing vdsm-client from the 4.1.0 release repo worked just fine. regards, Brett On 4 March 2017 at 11:54, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il 04/Mar/2017 12:21, "Maton, Brett" <matonb@ltresources.co.uk> ha scritto:
I'm not sure why it's asking for vdsm-client >= 4.18.6
I've got the following vdsm rpms installed:
vdsm-4.19.4-1.el7.centos.x86_64 vdsm-api-4.19.4-1.el7.centos.noarch vdsm-cli-4.19.4-1.el7.centos.noarch vdsm-hook-vmfex-dev-4.19.4-1.el7.centos.noarch vdsm-jsonrpc-4.19.4-1.el7.centos.noarch vdsm-python-4.19.4-1.el7.centos.noarch vdsm-xmlrpc-4.19.4-1.el7.centos.noarch vdsm-yajsonrpc-4.19.4-1.el7.centos.noarch
Still missing vdsm-client in the list.
On 3 March 2017 at 15:26, Maton, Brett <matonb@ltresources.co.uk> wrote:
Ok thanks, I'll give that another go shortly
On 3 March 2017 at 15:24, Yaniv Kaul <ykaul@redhat.com> wrote:
On Fri, Mar 3, 2017 at 5:21 PM Maton, Brett <matonb@ltresources.co.uk> wrote:
Hi Simone,
I just tried to install the RPM but got a dependency issue:
Error: Package: ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch (/ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch) Requires: vdsm-client >= 4.18.6
I haven't tried to install vdsm-client as I'm not sure what impact that will have on the other pacakges
vdsm-client is our 'next-gen' vdsClient - the CLI client to VDSM. You can and should install it in 4.1. Y.
On 3 March 2017 at 10:59, Maton, Brett <matonb@ltresources.co.uk> wrote:
Thanks Simone,
I'll give that a go this evening, I'm remote at the moment.
Regards, Brett
On 3 March 2017 at 10:48, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Fri, Mar 3, 2017 at 11:35 AM, Maton, Brett <matonb@ltresources.co.uk
wrote:
VM Up not responding - Yes that seems to be the case.
I did actually try hosted-engine --console
hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null>
This was the result of https://bugzilla.redhat.com /show_bug.cgi?id=1364132
Could you please install this (it's from 4.1.1 RC) http://resources.ovirt.org/pub/ovirt-4.1-pre/rpm/el7/noarch/ ovirt-hosted-engine-ha-2.1.0.4-1.el7.centos.noarch.rpm to get it fixed. You need then to run: systemctl restart ovirt-ha-agent hosted-engine --vm-shutdown # wait for it hosted-engine --vm-start
At this point you have should have the serial console.
On 3 March 2017 at 08:39, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Mar 2, 2017 at 11:42 AM, Maton, Brett <matonb@ltresources.co.uk
wrote:
What is the correct way to shut down a cluster ?
I shutdown my 4.1 cluster following this guide https://github.com/rharmonson/richtech/wiki/OSVDC-Series:-oV irt-3.6-Cluster-Shutdown-and-Startup as the NAS hosting the nfs mounts needed rebooting after updates.
( I realise the guide is for 3.6, surely not that different ? )
It seams fine.
However hosted engine isn't starting now.
failed liveliness check
So it seams that the engine VM is up but the engine is not responding.
I've tried connecting from the host starting the HE vm to see what's going on with:
virsh console HostedEngine
I don't know what authentication it requires, tried engine admin details and root os...
hosted-engine --console
hosted-engine --add-console-password Enter password: no graphics devices configured
unsurprisingly, remote-viewer vnc://localhost:5900 fails with Unable to connect to the graphic server vnc://localhost:5900
What can I do next ?
Check the status of the engine.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (4)
-
Maton, Brett -
Sandro Bonazzola -
Simone Tiraboschi -
Yaniv Kaul