[Users] networking
------=_Part_423_16853317.1370606619885 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I'm testing allinone V. 3.2.2-. I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I change this VM to DMZ the network stops work. It seems the VM keeps working on the old interface and the new configuration does not work. Any idea? Jose -- Jose Ferradeira http://www.logicworks.pt ------=_Part_423_16853317.1370606619885 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: arial,helvetica,sans-serif; font-size: 10pt; color: #000000'>I'm testing allinone V. 3.2.2-. <br>I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I change this VM to DMZ the network stops work. <br>It seems the VM keeps working on the old interface and the new configuration does not work.<br><br>Any idea?<br>Jose<br><br>-- <br><div><span name="x"></span><hr style="width: 100%; height: 2px;">Jose Ferradeira<br>http://www.logicworks.pt<br><span name="x"></span><br></div></div></body></html> ------=_Part_423_16853317.1370606619885--
------=_Part_588_26829948.1370613576053 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit well, I shutdown the VM, remove the 2 network interfaces from the V added again the DMZ network interface and it works now. ----- Original Message ----- From: suporte@logicworks.pt To: Users@ovirt.org Sent: Sexta-feira, 7 de Junho de 2013 13:03:38 Subject: [Users] networking I'm testing allinone V. 3.2.2-. I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I change this VM to DMZ the network stops work. It seems the VM keeps working on the old interface and the new configuration does not work. Any idea? Jose -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ------=_Part_588_26829948.1370613576053 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: arial,helvetica,sans-serif; font-size: 10pt; colo= r: #000000'>well, I shutdown the VM, remove the 2 network interfaces from t= he V added again the DMZ network interface and it works now.<br><br><hr id= =3D"zwchr"><div style=3D"color: rgb(0, 0, 0); font-weight: normal; font-sty= le: normal; text-decoration: none; font-family: Helvetica,Arial,sans-serif;= font-size: 12pt;"><b>From: </b>suporte@logicworks.pt<br><b>To: </b>Users@o= virt.org<br><b>Sent: </b>Sexta-feira, 7 de Junho de 2013 13:03:38<br><b>Sub= ject: </b>[Users] networking<br><br><style>p { margin: 0; }</style><div sty= le=3D"font-family: arial,helvetica,sans-serif; font-size: 10pt; color: rgb(= 0, 0, 0);">I'm testing allinone V. 3.2.2-. <br>I have 2 NICs, one is ovirtm= gmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. = If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM a= nd choose ovirtmgmt and later on I change this VM to DMZ the network stops = work. <br>It seems the VM keeps working on the old interface and the new co= nfiguration does not work.<br><br>Any idea?<br>Jose<br><br>-- <br><div><spa= n></span><hr style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://= www.logicworks.pt<br><span></span><br></div></div><br>_____________________= __________________________<br>Users mailing list<br>Users@ovirt.org<br>http= ://lists.ovirt.org/mailman/listinfo/users<br></div><br></div></body></html> ------=_Part_588_26829948.1370613576053--
On Fri, Jun 07, 2013 at 02:59:38PM +0100, suporte@logicworks.pt wrote:
well, I shutdown the VM, remove the 2 network interfaces from the V added again the DMZ network interface and it works now.
----- Original Message -----
From: suporte@logicworks.pt To: Users@ovirt.org Sent: Sexta-feira, 7 de Junho de 2013 13:03:38 Subject: [Users] networking
I'm testing allinone V. 3.2.2-. I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I change this VM to DMZ the network stops work. It seems the VM keeps working on the old interface and the new configuration does not work.
Would you elaborate on how you have changed networking in this VM? Can you see an updateDevice command in your vdsm.log? Could it be that the VM was properly re-wired, but the guest simply needs a gentle notification of that, with `service network restart` or other means of setting a new IP address, befitting its new subnet? Dan.
------=_Part_561_20231564.1371034485868 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I'll make some more tests, but can I change a VM network interface without shut it down first? The idea is, the VM is in DHCP, i want to change it from network 192.168.5.0 (ovirtmgmt) to network 192.168.10.0 (DMZ), will I first create a network interface on DMZ and than delete the ovirtmgmt net interface? ----- Original Message ----- From: "Dan Kenigsberg" <danken@redhat.com> To: suporte@logicworks.pt Cc: Users@ovirt.org Sent: Domingo, 9 de Junho de 2013 13:57:22 Subject: Re: [Users] networking On Fri, Jun 07, 2013 at 02:59:38PM +0100, suporte@logicworks.pt wrote:
well, I shutdown the VM, remove the 2 network interfaces from the V added again the DMZ network interface and it works now.
----- Original Message -----
From: suporte@logicworks.pt To: Users@ovirt.org Sent: Sexta-feira, 7 de Junho de 2013 13:03:38 Subject: [Users] networking
I'm testing allinone V. 3.2.2-. I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the other one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirtmgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I change this VM to DMZ the network stops work. It seems the VM keeps working on the old interface and the new configuration does not work.
Would you elaborate on how you have changed networking in this VM? Can you see an updateDevice command in your vdsm.log? Could it be that the VM was properly re-wired, but the guest simply needs a gentle notification of that, with `service network restart` or other means of setting a new IP address, befitting its new subnet? Dan. ------=_Part_561_20231564.1371034485868 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: arial,helvetica,sans-serif; font-size: 10pt; colo= r: #000000'>I'll make some more tests, but can I change a VM network interf= ace without shut it down first?<br>The idea is, the VM is in DHCP, i want t= o change it from network 192.168.5.0 (ovirtmgmt) to network 192.168.10.0 (D= MZ), will I first create a network interface on DMZ and than delete the ovi= rtmgmt net interface?<br><br><hr id=3D"zwchr"><div style=3D"color: rgb(0, 0= , 0); font-weight: normal; font-style: normal; text-decoration: none; font-= family: Helvetica,Arial,sans-serif; font-size: 12pt;"><b>From: </b>"Dan Ken= igsberg" <danken@redhat.com><br><b>To: </b>suporte@logicworks.pt<br><= b>Cc: </b>Users@ovirt.org<br><b>Sent: </b>Domingo, 9 de Junho de 2013 13:57= :22<br><b>Subject: </b>Re: [Users] networking<br><br>On Fri, Jun 07, 2013 a= t 02:59:38PM +0100, suporte@logicworks.pt wrote:<br>> well, I shutdown t= he VM, remove the 2 network interfaces from the V added again the DMZ netwo= rk interface and it works now. <br>> <br>> ----- Original Message ---= --<br>> <br>> From: suporte@logicworks.pt <br>> To: Users@ovirt.or= g <br>> Sent: Sexta-feira, 7 de Junho de 2013 13:03:38 <br>> Subject:= [Users] networking <br>> <br>> <br>> I'm testing allinone V. 3.2.= 2-. <br>> I have 2 NICs, one is ovirtmgmt for 192.168.5.0 network, the o= ther one I call it DMZ for 192.168.10.0. If I install a VM and choose ovirt= mgmt or DMZ it works, If I install a VM and choose ovirtmgmt and later on I= change this VM to DMZ the network stops work. <br>> It seems the VM kee= ps working on the old interface and the new configuration does not work. <b= r><br>Would you elaborate on how you have changed networking in this VM? Ca= n<br>you see an updateDevice command in your vdsm.log?<br><br>Could it be t= hat the VM was properly re-wired, but the guest simply<br>needs a gentle no= tification of that, with `service network restart` or<br>other means of set= ting a new IP address, befitting its new subnet?<br><br>Dan.<br></div><br><= /div></body></html> ------=_Part_561_20231564.1371034485868--
On Wed, Jun 12, 2013 at 11:54:34AM +0100, suporte@logicworks.pt wrote:
I'll make some more tests, but can I change a VM network interface without shut it down first?
I'm not sure what you mean by your question. I had a theory, that you have rewired a vNIC of a live VM to a new network, but did not follow it with a manual reconfiguration within the guest.
The idea is, the VM is in DHCP, i want to change it from network 192.168.5.0 (ovirtmgmt) to network 192.168.10.0 (DMZ), will I first create a network interface on DMZ and than delete the ovirtmgmt net interface?
I think that it should be enough to log into the console of that VM after the re-wiring, and issue a `service network restart`. Dan.
participants (2)
-
Dan Kenigsberg -
suporte＠logicworks.pt