Re: why cannot set the power management proxy server ?

I set lanplus=1, and then it ok. What’s meaning of it ? From: Strahil Nikolov <hunter86_bg@yahoo.com> Sent: Friday, September 24, 2021 3:13 AM To: Tommy Sway <sz_cuitao@163.com> Subject: Re: [ovirt-users] why cannot set the power management proxy server ? Try adding 'lanplus=0' into the options. Best Regards, Strahil Nikolov On Thu, Sep 23, 2021 at 5:59, Tommy Sway <sz_cuitao@163.com <mailto:sz_cuitao@163.com> > wrote: I can use ipmitool to send commands from any KVM host to other hosts in the same cluster. However, an internal error is reported when CONFIGURING power proxy on engine. How can I locate the fault? _______________________________________________ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/62XDSQNJTOPRKT...

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/htm... True or 1. If blank, then value is False. It is recommended that you enable Lanplus to improve the security of your connection if your hardware supports it. Most probably the hardware doesn't support with reduced security (lanplus=False is the default). Best Regards,Strahil Nikolov On Fri, Sep 24, 2021 at 6:12, Tommy Sway<sz_cuitao@163.com> wrote: _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YIJF7PZAJZG6EE...

Thank you very much! I have read your document. The article mentioned that LANPLUS enhances the security of communication, but it did not elaborate on what LANPLUS is. I want to know what technology it is. From: users-bounces@ovirt.org <users-bounces@ovirt.org> On Behalf Of Strahil Nikolov via Users Sent: Saturday, September 25, 2021 5:28 PM To: Tommy Sway <sz_cuitao@163.com>; 'users' <users@ovirt.org> Subject: [ovirt-users] Re: why cannot set the power management proxy server ? https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/htm... True or 1. If blank, then value is False. It is recommended that you enable Lanplus to improve the security of your connection if your hardware supports it. Most probably the hardware doesn't support with reduced security (lanplus=False is the default). Best Regards, Strahil Nikolov On Fri, Sep 24, 2021 at 6:12, Tommy Sway <sz_cuitao@163.com <mailto:sz_cuitao@163.com> > wrote: _______________________________________________ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YIJF7PZAJZG6EE...

According to https://portal.nutanix.com/page/documents/kbs/details?targetId=kA0600000008T... : 'The lanplus parameter is required to enable the IPMI 2.0 RMPC+ protocol' According to https://en.wikipedia.org/wiki/Intelligent_Platform_Management_Interface 'RMCP+ (a UDP-based protocol with stronger authentication than RMCP) is used for IPMI over LAN.' I guess you can find more details at https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/... (page 129,130). Best Regards, Strahil Nikolov В събота, 25 септември 2021 г., 13:28:03 ч. Гринуич+3, Tommy Sway <sz_cuitao@163.com> написа: Thank you very much! I have read your document. The article mentioned that LANPLUS enhances the security of communication, but it did not elaborate on what LANPLUS is. I want to know what technology it is. From: users-bounces@ovirt.org <users-bounces@ovirt.org> On Behalf Of Strahil Nikolov via UsersSent: Saturday, September 25, 2021 5:28 PMTo: Tommy Sway <sz_cuitao@163.com>; 'users' <users@ovirt.org>Subject: [ovirt-users] Re: why cannot set the power management proxy server ? https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/htm... True or 1. If blank, then value is False. It is recommended that you enable Lanplus to improve the security of your connection if your hardware supports it. Most probably the hardware doesn't support with reduced security (lanplus=False is the default). Best Regards, Strahil Nikolov
On Fri, Sep 24, 2021 at 6:12, Tommy Sway <sz_cuitao@163.com> wrote: _______________________________________________Users mailing list -- users@ovirt.orgTo unsubscribe send an email to users-leave@ovirt.orgPrivacy Statement: https://www.ovirt.org/privacy-policy.htmloVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YIJF7PZAJZG6EE...
participants (2)
-
Strahil Nikolov
-
Tommy Sway