3:30 p.m.
--------------030708060003050100080602
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Transfer-Encoding: 7bit
I'm sure I must have just missed something...
I just setup a new ovirt cluster with gluster & nfs data domains.
VMs on the NFS domain startup with no issues.
VMs on the gluster domains complain of "Permission denied" on startup.
2016-05-17 14:14:51,959 ERROR [org.ovirt.engine.core.dal.dbbroker.audi
tloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) [] Correlation
ID: null, Call Stack: null, Custom Event ID: -1, Message: VM
billj7-2.j2noc.com is down with error. Exit message: internal error:
process exited while connecting to monitor: 2016-05-17T21:14:51.162932Z
qemu-kvm: -drive
file=/rhev/data-center/00000001-0001-0001-0001-0000000002c5/22df0943-c131-4ed8-ba9c-05923afcf8e3/images/2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25/a2b0a04d-041f-4342-9687-142cc641b35e,if=none,id=drive-virtio-disk0,format=raw,serial=2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25,cache=none,werror=stop,rerror=stop,aio=threads:
Could not open
'/rhev/data-center/00000001-0001-0001-0001-0000000002c5/22df0943-c131-4ed8-ba9c-05923afcf8e3/images/2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25/a2b0a04d-041f-4342-9687-142cc641b35e':
Permission denied
I did setup gluster permissions:
gluster volume set gv1 storage.owner-uid 36
gluster volume set gv1 storage.owner-gid 36
files look fine:
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# ls -lah
total 2.0G
drwxr-xr-x 2 vdsm kvm 4.0K May 17 09:39 .
drwxr-xr-x 11 vdsm kvm 4.0K May 17 10:40 ..
-rw-rw---- 1 vdsm kvm 20G May 17 10:33
a2b0a04d-041f-4342-9687-142cc641b35e
-rw-rw---- 1 vdsm kvm 1.0M May 17 09:38
a2b0a04d-041f-4342-9687-142cc641b35e.lease
-rw-r--r-- 1 vdsm kvm 259 May 17 09:39
a2b0a04d-041f-4342-9687-142cc641b35e.meta
I did check and vdsm user can read the file just fine.
*If I change mod disk to 666 VM starts up fine.*
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# grep 36
/etc/passwd /etc/group
/etc/passwd:vdsm:x:36:36:Node Virtualization Manager:/:/bin/bash
/etc/group:kvm:x:36:qemu,sanlock
ovirt-engine-3.6.4.1-1.el7.centos.noarch
glusterfs-3.7.11-1.el7.x86_64
I also set libvirt qemu user to root, for import-to-ovirt.pl script.
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# grep ^user
/etc/libvirt/qemu.conf
user = "root"
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# gluster volume
info gv1
Volume Name: gv1
Type: Replicate
Volume ID: 062aa1a5-91e8-420d-800e-b8bc4aff20d8
Status: Started
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1-gl.j2noc.com:/ovirt-store/brick1/gv1
Brick2: ovirt2-gl.j2noc.com:/ovirt-store/brick1/gv1
Brick3: ovirt3-gl.j2noc.com:/ovirt-store/brick1/gv1
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: enable
cluster.quorum-type: auto
cluster.server-quorum-type: server
features.shard: on
features.shard-block-size: 64MB
storage.owner-uid: 36
storage.owner-gid: 36
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# gluster volume
status gv1
Status of volume: gv1
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick ovirt1-gl.j2noc.com:/ovirt-store/bric
k1/gv1 49152 0 Y 2046
Brick ovirt2-gl.j2noc.com:/ovirt-store/bric
k1/gv1 49152 0 Y 22532
Brick ovirt3-gl.j2noc.com:/ovirt-store/bric
k1/gv1 49152 0 Y 59683
NFS Server on localhost 2049 0 Y 2200
Self-heal Daemon on localhost N/A N/A Y 2232
NFS Server on ovirt3-gl.j2noc.com 2049 0 Y 65363
Self-heal Daemon on ovirt3-gl.j2noc.com N/A N/A Y 65371
NFS Server on ovirt2-gl.j2noc.com 2049 0 Y 17621
Self-heal Daemon on ovirt2-gl.j2noc.com N/A N/A Y 17629
Task Status of Volume gv1
------------------------------------------------------------------------------
There are no active volume tasks
??
--------------030708060003050100080602
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html;
charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
I'm sure I must have just missed something...<br>
I just setup a new ovirt cluster with gluster & nfs data
domains.<br>
<br>
VMs on the NFS domain startup with no issues.<br>
VMs on the gluster domains complain of "Permission denied" on
startup.<br>
<br>
2016-05-17 14:14:51,959 ERROR
[org.ovirt.engine.core.dal.dbbroker.audi<br>
tloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) []
Correlation ID: null, Call Stack: null, Custom Event ID: -1,
Message: VM billj7-2.j2noc.com is down with error. Exit message:
internal error: process exited while connecting to monitor:
2016-05-17T21:14:51.162932Z qemu-kvm: -drive
file=/rhev/data-center/00000001-0001-0001-0001-0000000002c5/22df0943-c131-4ed8-ba9c-05923afcf8e3/images/2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25/a2b0a04d-041f-4342-9687-142cc641b35e,if=none,id=drive-virtio-disk0,format=raw,serial=2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25,cache=none,werror=stop,rerror=stop,aio=threads:
Could not open
'/rhev/data-center/00000001-0001-0001-0001-0000000002c5/22df0943-c131-4ed8-ba9c-05923afcf8e3/images/2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25/a2b0a04d-041f-4342-9687-142cc641b35e':
Permission denied<br>
<br>
<br>
I did setup gluster permissions:<br>
gluster volume set gv1 storage.owner-uid 36<br>
gluster volume set gv1 storage.owner-gid 36<br>
<br>
files look fine:<br>
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# ls -lah<br>
total 2.0G<br>
drwxr-xr-x 2 vdsm kvm 4.0K May 17 09:39 .<br>
drwxr-xr-x 11 vdsm kvm 4.0K May 17 10:40 ..<br>
-rw-rw---- 1 vdsm kvm 20G May 17 10:33
a2b0a04d-041f-4342-9687-142cc641b35e<br>
-rw-rw---- 1 vdsm kvm 1.0M May 17 09:38
a2b0a04d-041f-4342-9687-142cc641b35e.lease<br>
-rw-r--r-- 1 vdsm kvm 259 May 17 09:39
a2b0a04d-041f-4342-9687-142cc641b35e.meta<br>
<br>
I did check and vdsm user can read the file just fine.<br>
<b>If I change mod disk to 666 VM starts up fine.</b><br>
<br>
<br>
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# grep 36
/etc/passwd /etc/group<br>
/etc/passwd:vdsm:x:36:36:Node Virtualization Manager:/:/bin/bash<br>
/etc/group:kvm:x:36:qemu,sanlock<br>
<br>
<br>
ovirt-engine-3.6.4.1-1.el7.centos.noarch<br>
glusterfs-3.7.11-1.el7.x86_64<br>
<br>
<br>
I also set libvirt qemu user to root, for import-to-ovirt.pl script.<br>
<br>
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# grep ^user
/etc/libvirt/qemu.conf <br>
user = "root"<br>
<br>
<br>
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# gluster
volume info gv1<br>
<br>
Volume Name: gv1<br>
Type: Replicate<br>
Volume ID: 062aa1a5-91e8-420d-800e-b8bc4aff20d8<br>
Status: Started<br>
Number of Bricks: 1 x 3 = 3<br>
Transport-type: tcp<br>
Bricks:<br>
Brick1: ovirt1-gl.j2noc.com:/ovirt-store/brick1/gv1<br>
Brick2: ovirt2-gl.j2noc.com:/ovirt-store/brick1/gv1<br>
Brick3: ovirt3-gl.j2noc.com:/ovirt-store/brick1/gv1<br>
Options Reconfigured:<br>
performance.readdir-ahead: on<br>
performance.quick-read: off<br>
performance.read-ahead: off<br>
performance.io-cache: off<br>
performance.stat-prefetch: off<br>
cluster.eager-lock: enable<br>
network.remote-dio: enable<br>
cluster.quorum-type: auto<br>
cluster.server-quorum-type: server<br>
features.shard: on<br>
features.shard-block-size: 64MB<br>
storage.owner-uid: 36<br>
storage.owner-gid: 36<br>
<br>
[root@ovirt1 prod 2ddf0d0e-6a7e-4eb9-b1d5-6d7792da0d25]# gluster
volume status gv1<br>
Status of volume: gv1<br>
Gluster process TCP Port RDMA Port
Online Pid<br>
------------------------------------------------------------------------------<br>
Brick ovirt1-gl.j2noc.com:/ovirt-store/bric<br>
k1/gv1 49152 0
Y 2046 <br>
Brick ovirt2-gl.j2noc.com:/ovirt-store/bric<br>
k1/gv1 49152 0
Y 22532<br>
Brick ovirt3-gl.j2noc.com:/ovirt-store/bric<br>
k1/gv1 49152 0
Y 59683<br>
NFS Server on localhost 2049 0
Y 2200 <br>
Self-heal Daemon on localhost N/A N/A
Y 2232 <br>
NFS Server on ovirt3-gl.j2noc.com 2049 0
Y 65363<br>
Self-heal Daemon on ovirt3-gl.j2noc.com N/A N/A
Y 65371<br>
NFS Server on ovirt2-gl.j2noc.com 2049 0
Y 17621<br>
Self-heal Daemon on ovirt2-gl.j2noc.com N/A N/A
Y 17629<br>
<br>
Task Status of Volume gv1<br>
------------------------------------------------------------------------------<br>
There are no active volume tasks<br>
<br>
<br>
<br>
??<br>
<br>
<br>
</body>
</html>
--------------030708060003050100080602--
12:49 p.m.
Some added info. This issue seems to be just like this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1052114
I have verified that chown qemu:qemu of disk image also fixes the
startup issue.
I'm using raw, not qcow images.
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img info
253f9615-f111-45ca-bdce-cbc9e70406df
image: 253f9615-f111-45ca-bdce-cbc9e70406df
file format: raw
virtual size: 20G (21474836480 bytes)
disk size: 1.9G
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
253f9615-f111-45ca-bdce-cbc9e70406df
-rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df
(default perms = vdsm:kvm)
qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
Ideas??
4:47 p.m.
another data point.
Changing just owner to qemu doesn't help.
Changing just group to qemu does. VM starts fine after that.
On 05/18/2016 11:49 AM, Bill James wrote:
Some added info. This issue seems to be just like this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1052114
I have verified that chown qemu:qemu of disk image also fixes the
startup issue.
I'm using raw, not qcow images.
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img info
253f9615-f111-45ca-bdce-cbc9e70406df
image: 253f9615-f111-45ca-bdce-cbc9e70406df
file format: raw
virtual size: 20G (21474836480 bytes)
disk size: 1.9G
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
253f9615-f111-45ca-bdce-cbc9e70406df
-rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df
(default perms = vdsm:kvm)
qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
Ideas??
10:58 a.m.
Nobody has any ideas or thoughts on how to troubleshoot?
why does qemu group work but not kvm when qemu is part of kvm group?
[root@ovirt1 prod vdsm]# grep qemu /etc/group
cdrom:x:11:qemu
kvm:x:36:qemu,sanlock
qemu:x:107:vdsm,sanlock
On 5/18/16 3:47 PM, Bill James wrote:
another data point.
Changing just owner to qemu doesn't help.
Changing just group to qemu does. VM starts fine after that.
On 05/18/2016 11:49 AM, Bill James wrote:
> Some added info. This issue seems to be just like this bug:
> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>
> I have verified that chown qemu:qemu of disk image also fixes the
> startup issue.
> I'm using raw, not qcow images.
>
>
> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
> info 253f9615-f111-45ca-bdce-cbc9e70406df
> image: 253f9615-f111-45ca-bdce-cbc9e70406df
> file format: raw
> virtual size: 20G (21474836480 bytes)
> disk size: 1.9G
> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
> 253f9615-f111-45ca-bdce-cbc9e70406df
> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
> 253f9615-f111-45ca-bdce-cbc9e70406df
>
> (default perms = vdsm:kvm)
>
> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>
>
> Ideas??
>
11:49 a.m.
This smells like selinux issues, did yoi try with permissive mode?
בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James" <bill.james(a)j2.com> כתב:
Nobody has any ideas or thoughts on how to troubleshoot?
why does qemu group work but not kvm when qemu is part of kvm group?
[root@ovirt1 prod vdsm]# grep qemu /etc/group
cdrom:x:11:qemu
kvm:x:36:qemu,sanlock
qemu:x:107:vdsm,sanlock
On 5/18/16 3:47 PM, Bill James wrote:
> another data point.
> Changing just owner to qemu doesn't help.
> Changing just group to qemu does. VM starts fine after that.
>
>
>
> On 05/18/2016 11:49 AM, Bill James wrote:
>
>> Some added info. This issue seems to be just like this bug:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>
>> I have verified that chown qemu:qemu of disk image also fixes the
>> startup issue.
>> I'm using raw, not qcow images.
>>
>>
>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img info
>> 253f9615-f111-45ca-bdce-cbc9e70406df
>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>> file format: raw
>> virtual size: 20G (21474836480 bytes)
>> disk size: 1.9G
>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
>> 253f9615-f111-45ca-bdce-cbc9e70406df
>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>
>> (default perms = vdsm:kvm)
>>
>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>
>>
>> Ideas??
>>
>>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:02 p.m.
--------------030301010207060905070006
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Transfer-Encoding: 8bit
[root@ovirt1 prod ~]# sestatus
SELinux status: disabled
On 5/20/16 10:49 AM, Nir Soffer wrote:
This smells like selinux issues, did yoi try with permissive mode?
×ת×ך×× 20 ×××× 2016 7:59 ×××׎׊,â "Bill James"
<bill.james(a)j2.com
<mailto:bill.james@j2.com>> ×ת×:
Nobody has any ideas or thoughts on how to troubleshoot?
why does qemu group work but not kvm when qemu is part of kvm group?
[root@ovirt1 prod vdsm]# grep qemu /etc/group
cdrom:x:11:qemu
kvm:x:36:qemu,sanlock
qemu:x:107:vdsm,sanlock
On 5/18/16 3:47 PM, Bill James wrote:
another data point.
Changing just owner to qemu doesn't help.
Changing just group to qemu does. VM starts fine after that.
On 05/18/2016 11:49 AM, Bill James wrote:
Some added info. This issue seems to be just like this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1052114
I have verified that chown qemu:qemu of disk image also
fixes the startup issue.
I'm using raw, not qcow images.
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
qemu-img info 253f9615-f111-45ca-bdce-cbc9e70406df
image: 253f9615-f111-45ca-bdce-cbc9e70406df
file format: raw
virtual size: 20G (21474836480 bytes)
disk size: 1.9G
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
ls -l 253f9615-f111-45ca-bdce-cbc9e70406df
-rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df
(default perms = vdsm:kvm)
qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
Ideas??
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
Cloud Services for Business www.j2.com
j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights
reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered
trademarks of j2 Global, Inc. and its affiliates.
--------------030301010207060905070006
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
[root@ovirt1 prod ~]# sestatus<br>
SELinux status:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â disabled<br>
<br>
<br>
<br>
<div class="moz-cite-prefix">On 5/20/16 10:49 AM, Nir Soffer
wrote:<br>
</div>
<blockquote
cite="mid:CAMRbyyti9B5b9977Vp0di6QV_Tq-_wf18h_e46KwA9TAOCBEug@mail.gmail.com"
type="cite">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p dir="ltr">This smells like selinux issues, did yoi try with
permissive mode?</p>
<div class="gmail_quote">×ת×ך×× 20 ×××× 2016 7:59
×××׎׊,â "Bill
James" <<a moz-do-not-send="true"
href="mailto:bill.james@j2.com">bill.james@j2.com</a>>
×ת×:<br
type="attribution">
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Nobody has
any ideas or thoughts on how to troubleshoot?<br>
<br>
why does qemu group work but not kvm when qemu is part of kvm
group?<br>
<br>
[root@ovirt1 prod vdsm]# grep qemu /etc/group<br>
cdrom:x:11:qemu<br>
kvm:x:36:qemu,sanlock<br>
qemu:x:107:vdsm,sanlock<br>
<br>
<br>
On 5/18/16 3:47 PM, Bill James wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
another data point.<br>
Changing just owner to qemu doesn't help.<br>
Changing just group to qemu does. VM starts fine after that.<br>
<br>
<br>
<br>
On 05/18/2016 11:49 AM, Bill James wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
Some added info. This issue seems to be just like this
bug:<br>
<a moz-do-not-send="true"
href="https://bugzilla.redhat.com/show_bug.cgi?id=1052114"
rel="noreferrer"
target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=...
<br>
I have verified that chown qemu:qemu of disk image also
fixes the startup issue.<br>
I'm using raw, not qcow images.<br>
<br>
<br>
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
qemu-img info 253f9615-f111-45ca-bdce-cbc9e70406df<br>
image: 253f9615-f111-45ca-bdce-cbc9e70406df<br>
file format: raw<br>
virtual size: 20G (21474836480 bytes)<br>
disk size: 1.9G<br>
[root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
ls -l 253f9615-f111-45ca-bdce-cbc9e70406df<br>
-rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df<br>
<br>
(default perms = vdsm:kvm)<br>
<br>
qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64<br>
qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64<br>
libvirt-daemon-1.2.17-13.el7_2.4.x86_64<br>
<br>
<br>
Ideas??<br>
<br>
</blockquote>
<br>
</blockquote>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true" href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
</blockquote>
<br>
<p><a
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsell-re...
style='color:windowtext;
text-decoration:none'><img border=0 width=391 height=46
src="http://home.j2.com/j2_Global_Cloud_Services/j2_Global_Email_Foo...
alt="www.j2.com"></span></a></p>
<p><span
style='font-size:8.0pt;font-family:"Arial","sans-serif";
color:gray'>This email, its contents and attachments contain information from <a
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsell-re...
Global, Inc</a>. and/or its affiliates which may be privileged, confidential or
otherwise protected from disclosure. The information is intended to be for the
addressee(s) only. If you are not an addressee, any disclosure, copy, distribution, or use
of the contents of this message is prohibited. If you have received this email in error
please notify the sender by reply e-mail and delete the original message and any copies. ©
2015 <a href="http://www.j2.com/">j2 Global, Inc</a>. All rights
reserved. <a href="http://www.efax.com/">eFax ®</a>, <a
href="http://www.evoice.com/">eVoice ®</a>, <a
href="http://www.campaigner.com/">Campaigner ®</a>, <a
href="http://www.fusemail.com/">FuseMail ®</a>, <a
href="http://www.keepitsafe.com/">KeepItSafe ®</a> and <a
href="http://www.onebox.com/">Onebox ®</a> are registered trademarks of
<a href="http://www.j2.com/">j2 Global, Inc</a>. and its
affiliates.</span></p></body>
</html>
--------------030301010207060905070006--
![src="http://home.j2.com/j2_Global_Cloud_Services/j2_Global_Email_Foo...](http://src="http://home.j2.com/j2_Global_Cloud_Services/j2_Global_Email_Footer.jpg%22){kind=link}
12:13 p.m.
On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com> wrote:
[root@ovirt1 prod ~]# sestatus
SELinux status: disabled
Same on ovirt2?
On 5/20/16 10:49 AM, Nir Soffer wrote:
This smells like selinux issues, did yoi try with permissive mode?
בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James" <bill.james(a)j2.com> כתב:
> Nobody has any ideas or thoughts on how to troubleshoot?
>
> why does qemu group work but not kvm when qemu is part of kvm group?
>
> [root@ovirt1 prod vdsm]# grep qemu /etc/group
> cdrom:x:11:qemu
> kvm:x:36:qemu,sanlock
> qemu:x:107:vdsm,sanlock
>
>
> On 5/18/16 3:47 PM, Bill James wrote:
>
>> another data point.
>> Changing just owner to qemu doesn't help.
>> Changing just group to qemu does. VM starts fine after that.
>>
>>
>>
>> On 05/18/2016 11:49 AM, Bill James wrote:
>>
>>> Some added info. This issue seems to be just like this bug:
>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>
>>> I have verified that chown qemu:qemu of disk image also fixes the
>>> startup issue.
>>> I'm using raw, not qcow images.
>>>
>>>
>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img info
>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>> file format: raw
>>> virtual size: 20G (21474836480 bytes)
>>> disk size: 1.9G
>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>
>>> (default perms = vdsm:kvm)
>>>
>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>
>>>
>>> Ideas??
>>>
>>>
>>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
[image: www.j2.com]
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
This email, its contents and attachments contain information from j2
Global, Inc
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
and/or its affiliates which may be privileged, confidential or otherwise
protected from disclosure. The information is intended to be for the
addressee(s) only. If you are not an addressee, any disclosure, copy,
distribution, or use of the contents of this message is prohibited. If you
have received this email in error please notify the sender by reply e-mail
and delete the original message and any copies. © 2015 j2 Global, Inc
<http://www.j2.com/>;. All rights reserved. eFax ® <http://www.efax.com/>;,
eVoice
® <http://www.evoice.com/>;, Campaigner ® <http://www.campaigner.com/>;,
FuseMail
® <http://www.fusemail.com/>;, KeepItSafe ® <http://www.keepitsafe.com/>
and Onebox ® <http://www.onebox.com/> are ! registere d trademarks of j2
Global, Inc <http://www.j2.com/>;. and its affiliates.
12:25 p.m.
--------------070303020801020908020608
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Transfer-Encoding: 8bit
yes
[root@ovirt2 prod .shard]# sestatus
SELinux status: disabled
[root@ovirt3 prod ~]# sestatus
SELinux status: disabled
On 5/20/16 11:13 AM, Nir Soffer wrote:
On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com
<mailto:bill.james@j2.com>> wrote:
[root@ovirt1 prod ~]# sestatus
SELinux status: disabled
Same on ovirt2?
On 5/20/16 10:49 AM, Nir Soffer wrote:
>
> This smells like selinux issues, did yoi try with permissive mode?
>
> ×ת×ך×× 20 ×××× 2016 7:59 ×××׎׊,â "Bill James"
<bill.james(a)j2.com
> <mailto:bill.james@j2.com>> ×ת×:
>
> Nobody has any ideas or thoughts on how to troubleshoot?
>
> why does qemu group work but not kvm when qemu is part of kvm
> group?
>
> [root@ovirt1 prod vdsm]# grep qemu /etc/group
> cdrom:x:11:qemu
> kvm:x:36:qemu,sanlock
> qemu:x:107:vdsm,sanlock
>
>
> On 5/18/16 3:47 PM, Bill James wrote:
>
> another data point.
> Changing just owner to qemu doesn't help.
> Changing just group to qemu does. VM starts fine after that.
>
>
>
> On 05/18/2016 11:49 AM, Bill James wrote:
>
> Some added info. This issue seems to be just like
> this bug:
> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>
> I have verified that chown qemu:qemu of disk image
> also fixes the startup issue.
> I'm using raw, not qcow images.
>
>
> [root@ovirt2 prod
> a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img info
> 253f9615-f111-45ca-bdce-cbc9e70406df
> image: 253f9615-f111-45ca-bdce-cbc9e70406df
> file format: raw
> virtual size: 20G (21474836480 bytes)
> disk size: 1.9G
> [root@ovirt2 prod
> a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
> 253f9615-f111-45ca-bdce-cbc9e70406df
> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
> 253f9615-f111-45ca-bdce-cbc9e70406df
>
> (default perms = vdsm:kvm)
>
> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>
>
> Ideas??
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
www.j2.com
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
This email, its contents and attachments contain information from
j2 Global, Inc
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
and/or its affiliates which may be privileged, confidential or
otherwise protected from disclosure. The information is intended
to be for the addressee(s) only. If you are not an addressee, any
disclosure, copy, distribution, or use of the contents of this
message is prohibited. If you have received this email in error
please notify the sender by reply e-mail and delete the original
message and any copies. © 2015 j2 Global, Inc
<http://www.j2.com/>;. All rights reserved. eFax ®
<http://www.efax.com/>;, eVoice ® <http://www.evoice.com/>;,
Campaigner ® <http://www.campaigner.com/>;, FuseMail ®
<http://www.fusemail.com/>;, KeepItSafe ®
<http://www.keepitsafe.com/> and Onebox ® <http://www.onebox.com/>
are ! registere d trademarks of j2 Global, Inc
<http://www.j2.com/>;. and its affiliates.
Cloud Services for Business www.j2.com
j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights
reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered
trademarks of j2 Global, Inc. and its affiliates.
--------------070303020801020908020608
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
yes<br>
<br>
[root@ovirt2 prod .shard]# sestatus<br>
SELinux status:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â disabled<br>
<br>
[root@ovirt3 prod ~]# sestatus<br>
SELinux status:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â disabled<br>
<br>
<br>
<br>
<div class="moz-cite-prefix">On 5/20/16 11:13 AM, Nir Soffer
wrote:<br>
</div>
<blockquote
cite="mid:CAMRbyytbtnMU4kmo+zMm8Pd98XbmmDTd+NaFMdXcvmHcVrVKng@mail.gmail.com"
type="cite">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<div dir="ltr">
<div class="gmail_extra">
<div class="gmail_quote">On Fri, May 20, 2016 at 9:02 PM, Bill
James <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:bill.james@j2.com"
target="_blank">bill.james(a)j2.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
[root@ovirt1 prod
~]# sestatus<br>
SELinux status:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â disabled</div>
</blockquote>
<div><br>
</div>
<div>Same on ovirt2?</div>
<div>Â </div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>
<div class="h5"><br>
<br>
<br>
<br>
<div>On 5/20/16 10:49 AM, Nir Soffer wrote:<br>
</div>
<blockquote type="cite">
<p dir="ltr">This smells like selinux issues, did
yoi try with permissive mode?</p>
<div class="gmail_quote">×ת×ך×× 20 ××××
2016 7:59
×××׎׊,â "Bill James" <<a
moz-do-not-send="true"
href="mailto:bill.james@j2.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:bill.james@j2.com">bill.james@j2.com</a></a>>
×ת×:<br
type="attribution">
<blockquote class="gmail_quote" style="margin:0
0 0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">Nobody has any ideas
or thoughts on how to troubleshoot?<br>
<br>
why does qemu group work but not kvm when qemu
is part of kvm group?<br>
<br>
[root@ovirt1 prod vdsm]# grep qemu /etc/group<br>
cdrom:x:11:qemu<br>
kvm:x:36:qemu,sanlock<br>
qemu:x:107:vdsm,sanlock<br>
<br>
<br>
On 5/18/16 3:47 PM, Bill James wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex"> another data
point.<br>
Changing just owner to qemu doesn't help.<br>
Changing just group to qemu does. VM starts
fine after that.<br>
<br>
<br>
<br>
On 05/18/2016 11:49 AM, Bill James wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex"> Some added
info. This issue seems to be just like
this bug:<br>
<a moz-do-not-send="true"
href="https://bugzilla.redhat.com/show_bug.cgi?id=1052114"
rel="noreferrer"
target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=...
<br>
I have verified that chown qemu:qemu of
disk image also fixes the startup issue.<br>
I'm using raw, not qcow images.<br>
<br>
<br>
[root@ovirt2 prod
a7af2477-4a19-4f01-9de1-c939c99e53ad]#
qemu-img info
253f9615-f111-45ca-bdce-cbc9e70406df<br>
image:
253f9615-f111-45ca-bdce-cbc9e70406df<br>
file format: raw<br>
virtual size: 20G (21474836480 bytes)<br>
disk size: 1.9G<br>
[root@ovirt2 prod
a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls
-l 253f9615-f111-45ca-bdce-cbc9e70406df<br>
-rw-rw---- 1 qemu qemu 21474836480 May 18
11:38 253f9615-f111-45ca-bdce-cbc9e70406df<br>
<br>
(default perms = vdsm:kvm)<br>
<br>
qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64<br>
qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64<br>
libvirt-daemon-1.2.17-13.el7_2.4.x86_64<br>
<br>
<br>
Ideas??<br>
<br>
</blockquote>
<br>
</blockquote>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
</blockquote>
<br>
</div>
</div>
<p><a moz-do-not-send="true"
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsel...
target="_blank"><span
style="color:windowtext;text-decoration:none"><img
moz-do-not-send="true"
src="http://home.j2.com/j2_Global_Cloud_Services/j2_Global_Email_Foo...
alt="www.j2.com" height="46"
border="0"
width="391"></span></a></p>
<p><span
style="font-size:8.0pt;font-family:"Arial","sans-serif";color:gray">This
email, its contents and attachments contain
information from <a moz-do-not-send="true"
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsel...
target="_blank">j2 Global, Inc</a>. and/or its
affiliates which may be privileged, confidential or
otherwise protected from disclosure. The information
is intended to be for the addressee(s) only. If you
are not an addressee, any disclosure, copy,
distribution, or use of the contents of this message
is prohibited. If you have received this email in
error please notify the sender by reply e-mail and
delete the original message and any copies. © 2015 <a
moz-do-not-send="true"
href="http://www.j2.com/"
target="_blank">j2 Global, Inc</a>. All rights
reserved. <a moz-do-not-send="true"
href="http://www.efax.com/"
target="_blank">eFax ®</a>,
<a moz-do-not-send="true"
href="http://www.evoice.com/"
target="_blank">eVoice
®</a>, <a moz-do-not-send="true"
href="http://www.campaigner.com/"
target="_blank">Campaigner
®</a>, <a moz-do-not-send="true"
href="http://www.fusemail.com/"
target="_blank">FuseMail
®</a>, <a moz-do-not-send="true"
href="http://www.keepitsafe.com/"
target="_blank">KeepItSafe
®</a> and <a moz-do-not-send="true"
href="http://www.onebox.com/"
target="_blank">Onebox
®</a> are ! registere d trademarks of <a
moz-do-not-send="true"
href="http://www.j2.com/"
target="_blank">j2 Global, Inc</a>. and its
affiliates.</span></p>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<br>
<p><a
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsell-re...
style='color:windowtext;
text-decoration:none'><img border=0 width=391 height=46
src="http://home.j2.com/j2_Global_Cloud_Services/j2_Global_Email_Foo...
alt="www.j2.com"></span></a></p>
<p><span
style='font-size:8.0pt;font-family:"Arial","sans-serif";
color:gray'>This email, its contents and attachments contain information from <a
href="http://www.j2.com/?utm_source=j2global&utm_medium=xsell-re...
Global, Inc</a>. and/or its affiliates which may be privileged, confidential or
otherwise protected from disclosure. The information is intended to be for the
addressee(s) only. If you are not an addressee, any disclosure, copy, distribution, or use
of the contents of this message is prohibited. If you have received this email in error
please notify the sender by reply e-mail and delete the original message and any copies. ©
2015 <a href="http://www.j2.com/">j2 Global, Inc</a>. All rights
reserved. <a href="http://www.efax.com/">eFax ®</a>, <a
href="http://www.evoice.com/">eVoice ®</a>, <a
href="http://www.campaigner.com/">Campaigner ®</a>, <a
href="http://www.fusemail.com/">FuseMail ®</a>, <a
href="http://www.keepitsafe.com/">KeepItSafe ®</a> and <a
href="http://www.onebox.com/">Onebox ®</a> are registered trademarks of
<a href="http://www.j2.com/">j2 Global, Inc</a>. and its
affiliates.</span></p></body>
</html>
--------------070303020801020908020608--
12:47 p.m.
On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com> wrote:
yes
[root@ovirt2 prod .shard]# sestatus
SELinux status: disabled
[root@ovirt3 prod ~]# sestatus
SELinux status: disabled
Can you share output of:
ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
'qemu|libvirt'
ps auxe | egrep 'qemu|libvirt'
On 5/20/16 11:13 AM, Nir Soffer wrote:
On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com> wrote:
> [root@ovirt1 prod ~]# sestatus
> SELinux status: disabled
>
Same on ovirt2?
>
>
>
>
> On 5/20/16 10:49 AM, Nir Soffer wrote:
>
> This smells like selinux issues, did yoi try with permissive mode?
> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James" <
<bill.james(a)j2.com>
> bill.james(a)j2.com> כתב:
>
>> Nobody has any ideas or thoughts on how to troubleshoot?
>>
>> why does qemu group work but not kvm when qemu is part of kvm group?
>>
>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>> cdrom:x:11:qemu
>> kvm:x:36:qemu,sanlock
>> qemu:x:107:vdsm,sanlock
>>
>>
>> On 5/18/16 3:47 PM, Bill James wrote:
>>
>>> another data point.
>>> Changing just owner to qemu doesn't help.
>>> Changing just group to qemu does. VM starts fine after that.
>>>
>>>
>>>
>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>
>>>> Some added info. This issue seems to be just like this bug:
>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>
>>>> I have verified that chown qemu:qemu of disk image also fixes the
>>>> startup issue.
>>>> I'm using raw, not qcow images.
>>>>
>>>>
>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
>>>> info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>> file format: raw
>>>> virtual size: 20G (21474836480 bytes)
>>>> disk size: 1.9G
>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>
>>>> (default perms = vdsm:kvm)
>>>>
>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>
>>>>
>>>> Ideas??
>>>>
>>>>
>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> [image: www.j2.com]
>
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
>
> This email, its contents and attachments contain information from j2
> Global, Inc
>
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
> and/or its affiliates which may be privileged, confidential or otherwise
> protected from disclosure. The information is intended to be for the
> addressee(s) only. If you are not an addressee, any disclosure, copy,
> distribution, or use of the contents of this message is prohibited. If you
> have received this email in error please notify the sender by reply e-mail
> and delete the original message and any copies. © 2015 j2 Global, Inc
> <http://www.j2.com/>;. All rights reserved. eFax ®
<http://www.efax.com/>;,
> eVoice ® <http://www.evoice.com/>;, Campaigner ®
> <http://www.campaigner.com/>;, FuseMail ® <http://www.fusemail.com/>;,
KeepItSafe
> ® <http://www.keepitsafe.com/> and Onebox ® <http://www.onebox.com/> are
> ! registere d trademarks of j2 Global, Inc <http://www.j2.com/>;. and its
> affiliates.
>
[image: www.j2.com]
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
This email, its contents and attachments contain information from j2
Global, Inc
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
and/or its affiliates which may be privileged, confidential or otherwise
protected from disclosure. The information is intended to be for the
addressee(s) only. If you are not an addressee, any disclosure, copy,
distribution, or use of the contents of this message is prohibited. If you
have received this email in error please notify the sender by reply e-mail
and delete the original message and any copies. © 2015 j2 Global, Inc
<http://www.j2.com/>;. All rights reserved. eFax ® <http://www.efax.com/>;,
eVoice
® <http://www.evoice.com/>;, Campaigner ® <http://www.campaigner.com/>;,
FuseMail
® <http://www.fusemail.com/>;, KeepItSafe ® <http://www.keepitsafe.com/>
and Onebox ® <http://www.onebox.com/> are ! registere d trademarks of j2
Global, Inc <http://www.j2.com/>;. and its affiliates.
1:41 p.m.
attached output from one host. others look similar.
On 5/20/16 11:47 AM, Nir Soffer wrote:
On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com
<mailto:bill.james@j2.com>> wrote:
yes
[root@ovirt2 prod .shard]# sestatus
SELinux status: disabled
[root@ovirt3 prod ~]# sestatus
SELinux status: disabled
Can you share output of:
ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd |
egrep 'qemu|libvirt'
ps auxe | egrep 'qemu|libvirt'
On 5/20/16 11:13 AM, Nir Soffer wrote:
> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com
> <mailto:bill.james@j2.com>> wrote:
>
> [root@ovirt1 prod ~]# sestatus
> SELinux status: disabled
>
>
> Same on ovirt2?
>
>
>
>
>
> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>
>> This smells like selinux issues, did yoi try with permissive
>> mode?
>>
>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James"
>> <bill.james(a)j2.com <mailto:bill.james@j2.com>> כתב:
>>
>> Nobody has any ideas or thoughts on how to troubleshoot?
>>
>> why does qemu group work but not kvm when qemu is part
>> of kvm group?
>>
>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>> cdrom:x:11:qemu
>> kvm:x:36:qemu,sanlock
>> qemu:x:107:vdsm,sanlock
>>
>>
>> On 5/18/16 3:47 PM, Bill James wrote:
>>
>> another data point.
>> Changing just owner to qemu doesn't help.
>> Changing just group to qemu does. VM starts fine
>> after that.
>>
>>
>>
>> On 05/18/2016 11:49 AM, Bill James wrote:
>>
>> Some added info. This issue seems to be just
>> like this bug:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>
>> I have verified that chown qemu:qemu of disk
>> image also fixes the startup issue.
>> I'm using raw, not qcow images.
>>
>>
>> [root@ovirt2 prod
>> a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
>> info 253f9615-f111-45ca-bdce-cbc9e70406df
>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>> file format: raw
>> virtual size: 20G (21474836480 bytes)
>> disk size: 1.9G
>> [root@ovirt2 prod
>> a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
>> 253f9615-f111-45ca-bdce-cbc9e70406df
>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>
>> (default perms = vdsm:kvm)
>>
>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>
>>
>> Ideas??
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> www.j2.com
>
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
>
> This email, its contents and attachments contain information
> from j2 Global, Inc
>
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
> and/or its affiliates which may be privileged, confidential
> or otherwise protected from disclosure. The information is
> intended to be for the addressee(s) only. If you are not an
> addressee, any disclosure, copy, distribution, or use of the
> contents of this message is prohibited. If you have received
> this email in error please notify the sender by reply e-mail
> and delete the original message and any copies. © 2015 j2
> Global, Inc <http://www.j2.com/>;. All rights reserved. eFax ®
> <http://www.efax.com/>;, eVoice ® <http://www.evoice.com/>;,
> Campaigner ® <http://www.campaigner.com/>;, FuseMail ®
> <http://www.fusemail.com/>;, KeepItSafe ®
> <http://www.keepitsafe.com/> and Onebox ®
> <http://www.onebox.com/> are ! registere d trademarks of j2
> Global, Inc <http://www.j2.com/>;. and its affiliates.
>
>
www.j2.com
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...
This email, its contents and attachments contain information from
j2 Global, Inc
<http://www.j2.com/?utm_source=j2global&utm_medium=xsell-referral&...;.
and/or its affiliates which may be privileged, confidential or
otherwise protected from disclosure. The information is intended
to be for the addressee(s) only. If you are not an addressee, any
disclosure, copy, distribution, or use of the contents of this
message is prohibited. If you have received this email in error
please notify the sender by reply e-mail and delete the original
message and any copies. © 2015 j2 Global, Inc
<http://www.j2.com/>;. All rights reserved. eFax ®
<http://www.efax.com/>;, eVoice ® <http://www.evoice.com/>;,
Campaigner ® <http://www.campaigner.com/>;, FuseMail ®
<http://www.fusemail.com/>;, KeepItSafe ®
<http://www.keepitsafe.com/> and Onebox ® <http://www.onebox.com/>
are ! registere d trademarks of j2 Global, Inc
<http://www.j2.com/>;. and its affiliates.
Cloud Services for Business www.j2.com
j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights
reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered
trademarks of j2 Global, Inc. and its affiliates.
2:16 p.m.
On Fri, May 20, 2016 at 10:41 PM, Bill James <bill.james(a)j2.com> wrote:
attached output from one host. others look similar.
Your qemu runs as *root*:
root root root root qemu qemu qemu qemu /usr/libexec/qemu-kvm
Here is the output from normal installation:
qemu qemu qemu qemu qemu qemu qemu
qemu /usr/libexec/qemu-kvm
I guess that gluster is configure with "option root-squashing on" so you
practically run as "nobody", and you are not in the kvm group.
Running qemu as root is also a security risk, if there is a security bug in qemu
a vm can use it to compromise your host or other vms.
Maybe you can configure gluster to treat root as vdsm using
option translate-uid 0=36
See http://www.gluster.org/community/documentation/index.php/Translators/feat...
But a better solution is to run qemu as qemu.
Adding Sahina to advise about gluster configuration.
Nir
On 5/20/16 11:47 AM, Nir Soffer wrote:
On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com> wrote:
>
> yes
>
> [root@ovirt2 prod .shard]# sestatus
> SELinux status: disabled
>
> [root@ovirt3 prod ~]# sestatus
> SELinux status: disabled
Can you share output of:
ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
'qemu|libvirt'
ps auxe | egrep 'qemu|libvirt'
>
>
>
>
>
> On 5/20/16 11:13 AM, Nir Soffer wrote:
>
> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com> wrote:
>>
>> [root@ovirt1 prod ~]# sestatus
>> SELinux status: disabled
>
>
> Same on ovirt2?
>
>>
>>
>>
>>
>>
>> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>
>> This smells like selinux issues, did yoi try with permissive mode?
>>
>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James" <bill.james(a)j2.com>
כתב:
>>>
>>> Nobody has any ideas or thoughts on how to troubleshoot?
>>>
>>> why does qemu group work but not kvm when qemu is part of kvm group?
>>>
>>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>>> cdrom:x:11:qemu
>>> kvm:x:36:qemu,sanlock
>>> qemu:x:107:vdsm,sanlock
>>>
>>>
>>> On 5/18/16 3:47 PM, Bill James wrote:
>>>>
>>>> another data point.
>>>> Changing just owner to qemu doesn't help.
>>>> Changing just group to qemu does. VM starts fine after that.
>>>>
>>>>
>>>>
>>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>>>
>>>>> Some added info. This issue seems to be just like this bug:
>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>>
>>>>> I have verified that chown qemu:qemu of disk image also fixes the
startup issue.
>>>>> I'm using raw, not qcow images.
>>>>>
>>>>>
>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>> file format: raw
>>>>> virtual size: 20G (21474836480 bytes)
>>>>> disk size: 1.9G
>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
253f9615-f111-45ca-bdce-cbc9e70406df
>>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>
>>>>> (default perms = vdsm:kvm)
>>>>>
>>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>>
>>>>>
>>>>> Ideas??
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>> This email, its contents and attachments contain information from j2 Global, Inc.
and/or its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All rights
reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are !
registere d trademarks of j2 Global, Inc. and its affiliates.
>
>
>
> This email, its contents and attachments contain information from j2 Global, Inc.
and/or its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All rights
reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are !
registere d trademarks of j2 Global, Inc. and its affiliates.
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All rights
reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are !
registere d trademarks of j2 Global, Inc. and its affiliates.
2:48 p.m.
I had added user = "root" because we use the import-to-ovirt.pl to move
Vms from our old virtual platform to ovirt.
My understanding was that was required for the to work.
Is that not true or is the import script not worth the headaches caused?
(https://rwmj.wordpress.com/2015/09/18/importing-kvm-guests-to-ovirt-or-rhev/)
[root@ovirt3 prod 4c4bfdf7-bc70-41b2-ab58-710ff8e850bf]# grep ^user
/etc/libvirt/qemu.conf
user = "root"
I'm assuming that's what sets the qemu user.
When I first tried using that script without setting "user = root" it
didn't work.
On 5/20/16 1:16 PM, Nir Soffer wrote:
On Fri, May 20, 2016 at 10:41 PM, Bill James
<bill.james(a)j2.com> wrote:
> attached output from one host. others look similar.
Your qemu runs as *root*:
root root root root qemu qemu qemu qemu /usr/libexec/qemu-kvm
Here is the output from normal installation:
qemu qemu qemu qemu qemu qemu qemu
qemu /usr/libexec/qemu-kvm
I guess that gluster is configure with "option root-squashing on" so you
practically run as "nobody", and you are not in the kvm group.
Running qemu as root is also a security risk, if there is a security bug in qemu
a vm can use it to compromise your host or other vms.
Maybe you can configure gluster to treat root as vdsm using
option translate-uid 0=36
See http://www.gluster.org/community/documentation/index.php/Translators/feat...
But a better solution is to run qemu as qemu.
Adding Sahina to advise about gluster configuration.
Nir
>
>
>
> On 5/20/16 11:47 AM, Nir Soffer wrote:
>
> On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com> wrote:
>> yes
>>
>> [root@ovirt2 prod .shard]# sestatus
>> SELinux status: disabled
>>
>> [root@ovirt3 prod ~]# sestatus
>> SELinux status: disabled
>
> Can you share output of:
>
> ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
'qemu|libvirt'
> ps auxe | egrep 'qemu|libvirt'
>
>>
>>
>>
>>
>> On 5/20/16 11:13 AM, Nir Soffer wrote:
>>
>> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com> wrote:
>>> [root@ovirt1 prod ~]# sestatus
>>> SELinux status: disabled
>>
>> Same on ovirt2?
>>
>>>
>>>
>>>
>>>
>>> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>>
>>> This smells like selinux issues, did yoi try with permissive mode?
>>>
>>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James"
<bill.james(a)j2.com> כתב:
>>>> Nobody has any ideas or thoughts on how to troubleshoot?
>>>>
>>>> why does qemu group work but not kvm when qemu is part of kvm group?
>>>>
>>>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>>>> cdrom:x:11:qemu
>>>> kvm:x:36:qemu,sanlock
>>>> qemu:x:107:vdsm,sanlock
>>>>
>>>>
>>>> On 5/18/16 3:47 PM, Bill James wrote:
>>>>> another data point.
>>>>> Changing just owner to qemu doesn't help.
>>>>> Changing just group to qemu does. VM starts fine after that.
>>>>>
>>>>>
>>>>>
>>>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>>>> Some added info. This issue seems to be just like this bug:
>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>>>
>>>>>> I have verified that chown qemu:qemu of disk image also fixes the
startup issue.
>>>>>> I'm using raw, not qcow images.
>>>>>>
>>>>>>
>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>> file format: raw
>>>>>> virtual size: 20G (21474836480 bytes)
>>>>>> disk size: 1.9G
>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>
>>>>>> (default perms = vdsm:kvm)
>>>>>>
>>>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>>>
>>>>>>
>>>>>> Ideas??
>>>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>> This email, its contents and attachments contain information from j2 Global,
Inc. and/or its affiliates which may be privileged, confidential or otherwise protected
from disclosure. The information is intended to be for the addressee(s) only. If you are
not an addressee, any disclosure, copy, distribution, or use of the contents of this
message is prohibited. If you have received this email in error please notify the sender
by reply e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All
rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are
! registere d trademarks of j2 Global, Inc. and its affiliates.
>>
>>
>> This email, its contents and attachments contain information from j2 Global, Inc.
and/or its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All rights
reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are !
registere d trademarks of j2 Global, Inc. and its affiliates.
>
>
> This email, its contents and attachments contain information from j2 Global, Inc.
and/or its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. © 2015 j2 Global, Inc. All rights
reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ® and Onebox ® are !
registere d trademarks of j2 Global, Inc. and its affiliates.
3:44 p.m.
On Fri, May 20, 2016 at 11:48 PM, Bill James <bill.james(a)j2.com> wrote:
I had added user = "root" because we use the
import-to-ovirt.pl to move Vms
from our old virtual platform to ovirt.
My understanding was that was required for the to work.
Is that not true or is the import script not worth the headaches caused?
(https://rwmj.wordpress.com/2015/09/18/importing-kvm-guests-to-ovirt-or-rhev/)
I don't know anything about this solution, adding Richard to add more info.
If you run 3.6, you can use v2v to import from other systems.
Adding Shahar to add into on v2v.
Nir
[root@ovirt3 prod 4c4bfdf7-bc70-41b2-ab58-710ff8e850bf]# grep ^user
/etc/libvirt/qemu.conf
user = "root"
I'm assuming that's what sets the qemu user.
When I first tried using that script without setting "user = root" it
didn't
work.
On 5/20/16 1:16 PM, Nir Soffer wrote:
>
> On Fri, May 20, 2016 at 10:41 PM, Bill James <bill.james(a)j2.com> wrote:
>>
>> attached output from one host. others look similar.
>
> Your qemu runs as *root*:
>
> root root root root qemu qemu qemu qemu /usr/libexec/qemu-kvm
>
> Here is the output from normal installation:
>
> qemu qemu qemu qemu qemu qemu qemu
> qemu /usr/libexec/qemu-kvm
>
> I guess that gluster is configure with "option root-squashing on" so you
> practically run as "nobody", and you are not in the kvm group.
>
> Running qemu as root is also a security risk, if there is a security bug
> in qemu
> a vm can use it to compromise your host or other vms.
>
> Maybe you can configure gluster to treat root as vdsm using
>
> option translate-uid 0=36
>
> See
> http://www.gluster.org/community/documentation/index.php/Translators/feat...
>
> But a better solution is to run qemu as qemu.
>
> Adding Sahina to advise about gluster configuration.
>
> Nir
>
>>
>>
>>
>> On 5/20/16 11:47 AM, Nir Soffer wrote:
>>
>> On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com> wrote:
>>>
>>> yes
>>>
>>> [root@ovirt2 prod .shard]# sestatus
>>> SELinux status: disabled
>>>
>>> [root@ovirt3 prod ~]# sestatus
>>> SELinux status: disabled
>>
>>
>> Can you share output of:
>>
>> ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
>> 'qemu|libvirt'
>> ps auxe | egrep 'qemu|libvirt'
>>
>>>
>>>
>>>
>>>
>>> On 5/20/16 11:13 AM, Nir Soffer wrote:
>>>
>>> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com> wrote:
>>>>
>>>> [root@ovirt1 prod ~]# sestatus
>>>> SELinux status: disabled
>>>
>>>
>>> Same on ovirt2?
>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>>>
>>>> This smells like selinux issues, did yoi try with permissive mode?
>>>>
>>>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James"
<bill.james(a)j2.com> כתב:
>>>>>
>>>>> Nobody has any ideas or thoughts on how to troubleshoot?
>>>>>
>>>>> why does qemu group work but not kvm when qemu is part of kvm group?
>>>>>
>>>>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>>>>> cdrom:x:11:qemu
>>>>> kvm:x:36:qemu,sanlock
>>>>> qemu:x:107:vdsm,sanlock
>>>>>
>>>>>
>>>>> On 5/18/16 3:47 PM, Bill James wrote:
>>>>>>
>>>>>> another data point.
>>>>>> Changing just owner to qemu doesn't help.
>>>>>> Changing just group to qemu does. VM starts fine after that.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>>>>>
>>>>>>> Some added info. This issue seems to be just like this bug:
>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>>>>
>>>>>>> I have verified that chown qemu:qemu of disk image also fixes
the
>>>>>>> startup issue.
>>>>>>> I'm using raw, not qcow images.
>>>>>>>
>>>>>>>
>>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
qemu-img
>>>>>>> info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>> file format: raw
>>>>>>> virtual size: 20G (21474836480 bytes)
>>>>>>> disk size: 1.9G
>>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls
-l
>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>
>>>>>>> (default perms = vdsm:kvm)
>>>>>>>
>>>>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>>>>
>>>>>>>
>>>>>>> Ideas??
>>>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>> This email, its contents and attachments contain information from j2
>>>> Global, Inc. and/or its affiliates which may be privileged, confidential
or
>>>> otherwise protected from disclosure. The information is intended to be
for
>>>> the addressee(s) only. If you are not an addressee, any disclosure,
copy,
>>>> distribution, or use of the contents of this message is prohibited. If
you
>>>> have received this email in error please notify the sender by reply
e-mail
>>>> and delete the original message and any copies. © 2015 j2 Global, Inc.
All
>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe
®
>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>>> affiliates.
>>>
>>>
>>>
>>> This email, its contents and attachments contain information from j2
>>> Global, Inc. and/or its affiliates which may be privileged, confidential or
>>> otherwise protected from disclosure. The information is intended to be for
>>> the addressee(s) only. If you are not an addressee, any disclosure, copy,
>>> distribution, or use of the contents of this message is prohibited. If you
>>> have received this email in error please notify the sender by reply e-mail
>>> and delete the original message and any copies. © 2015 j2 Global, Inc. All
>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ®
>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>> affiliates.
>>
>>
>>
>> This email, its contents and attachments contain information from j2
>> Global, Inc. and/or its affiliates which may be privileged, confidential or
>> otherwise protected from disclosure. The information is intended to be for
>> the addressee(s) only. If you are not an addressee, any disclosure, copy,
>> distribution, or use of the contents of this message is prohibited. If you
>> have received this email in error please notify the sender by reply e-mail
>> and delete the original message and any copies. © 2015 j2 Global, Inc. All
>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ®
>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>> affiliates.
3:53 p.m.
maybe the other doc is old but it says:
"And a feature I intentionally removed in RHEL 7 was importing KVM → KVM"
which is what I am doing. raw disk KVM to ovirt.
Yes I can copy the disk image over the top of a ovirt disk image, but
the import script seemed cleaner.
Does virt-v2v try to convert the KVM image to KVM image or does it just
import it?
On 5/20/16 2:44 PM, Nir Soffer wrote:
On Fri, May 20, 2016 at 11:48 PM, Bill James
<bill.james(a)j2.com> wrote:
> I had added user = "root" because we use the import-to-ovirt.pl to move
Vms
> from our old virtual platform to ovirt.
> My understanding was that was required for the to work.
> Is that not true or is the import script not worth the headaches caused?
> (https://rwmj.wordpress.com/2015/09/18/importing-kvm-guests-to-ovirt-or-rhev/)
I don't know anything about this solution, adding Richard to add more info.
If you run 3.6, you can use v2v to import from other systems.
Adding Shahar to add into on v2v.
Nir
> [root@ovirt3 prod 4c4bfdf7-bc70-41b2-ab58-710ff8e850bf]# grep ^user
> /etc/libvirt/qemu.conf
> user = "root"
>
> I'm assuming that's what sets the qemu user.
>
>
>
> When I first tried using that script without setting "user = root" it
didn't
> work.
>
>
>
>
> On 5/20/16 1:16 PM, Nir Soffer wrote:
>> On Fri, May 20, 2016 at 10:41 PM, Bill James <bill.james(a)j2.com> wrote:
>>> attached output from one host. others look similar.
>> Your qemu runs as *root*:
>>
>> root root root root qemu qemu qemu qemu /usr/libexec/qemu-kvm
>>
>> Here is the output from normal installation:
>>
>> qemu qemu qemu qemu qemu qemu qemu
>> qemu /usr/libexec/qemu-kvm
>>
>> I guess that gluster is configure with "option root-squashing on" so
you
>> practically run as "nobody", and you are not in the kvm group.
>>
>> Running qemu as root is also a security risk, if there is a security bug
>> in qemu
>> a vm can use it to compromise your host or other vms.
>>
>> Maybe you can configure gluster to treat root as vdsm using
>>
>> option translate-uid 0=36
>>
>> See
>> http://www.gluster.org/community/documentation/index.php/Translators/feat...
>>
>> But a better solution is to run qemu as qemu.
>>
>> Adding Sahina to advise about gluster configuration.
>>
>> Nir
>>
>>>
>>>
>>> On 5/20/16 11:47 AM, Nir Soffer wrote:
>>>
>>> On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com> wrote:
>>>> yes
>>>>
>>>> [root@ovirt2 prod .shard]# sestatus
>>>> SELinux status: disabled
>>>>
>>>> [root@ovirt3 prod ~]# sestatus
>>>> SELinux status: disabled
>>>
>>> Can you share output of:
>>>
>>> ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
>>> 'qemu|libvirt'
>>> ps auxe | egrep 'qemu|libvirt'
>>>
>>>>
>>>>
>>>>
>>>> On 5/20/16 11:13 AM, Nir Soffer wrote:
>>>>
>>>> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com>
wrote:
>>>>> [root@ovirt1 prod ~]# sestatus
>>>>> SELinux status: disabled
>>>>
>>>> Same on ovirt2?
>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>>>>
>>>>> This smells like selinux issues, did yoi try with permissive mode?
>>>>>
>>>>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James"
<bill.james(a)j2.com> כתב:
>>>>>> Nobody has any ideas or thoughts on how to troubleshoot?
>>>>>>
>>>>>> why does qemu group work but not kvm when qemu is part of kvm
group?
>>>>>>
>>>>>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>>>>>> cdrom:x:11:qemu
>>>>>> kvm:x:36:qemu,sanlock
>>>>>> qemu:x:107:vdsm,sanlock
>>>>>>
>>>>>>
>>>>>> On 5/18/16 3:47 PM, Bill James wrote:
>>>>>>> another data point.
>>>>>>> Changing just owner to qemu doesn't help.
>>>>>>> Changing just group to qemu does. VM starts fine after that.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>>>>>> Some added info. This issue seems to be just like this
bug:
>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>>>>>
>>>>>>>> I have verified that chown qemu:qemu of disk image also
fixes the
>>>>>>>> startup issue.
>>>>>>>> I'm using raw, not qcow images.
>>>>>>>>
>>>>>>>>
>>>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
qemu-img
>>>>>>>> info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>> file format: raw
>>>>>>>> virtual size: 20G (21474836480 bytes)
>>>>>>>> disk size: 1.9G
>>>>>>>> [root@ovirt2 prod a7af2477-4a19-4f01-9de1-c939c99e53ad]#
ls -l
>>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>>
>>>>>>>> (default perms = vdsm:kvm)
>>>>>>>>
>>>>>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>>>>>
>>>>>>>>
>>>>>>>> Ideas??
>>>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>> This email, its contents and attachments contain information from j2
>>>>> Global, Inc. and/or its affiliates which may be privileged,
confidential or
>>>>> otherwise protected from disclosure. The information is intended to
be for
>>>>> the addressee(s) only. If you are not an addressee, any disclosure,
copy,
>>>>> distribution, or use of the contents of this message is prohibited.
If you
>>>>> have received this email in error please notify the sender by reply
e-mail
>>>>> and delete the original message and any copies. © 2015 j2 Global,
Inc. All
>>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®,
KeepItSafe ®
>>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>>>> affiliates.
>>>>
>>>>
>>>> This email, its contents and attachments contain information from j2
>>>> Global, Inc. and/or its affiliates which may be privileged, confidential
or
>>>> otherwise protected from disclosure. The information is intended to be
for
>>>> the addressee(s) only. If you are not an addressee, any disclosure,
copy,
>>>> distribution, or use of the contents of this message is prohibited. If
you
>>>> have received this email in error please notify the sender by reply
e-mail
>>>> and delete the original message and any copies. © 2015 j2 Global, Inc.
All
>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe
®
>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>>> affiliates.
>>>
>>>
>>> This email, its contents and attachments contain information from j2
>>> Global, Inc. and/or its affiliates which may be privileged, confidential or
>>> otherwise protected from disclosure. The information is intended to be for
>>> the addressee(s) only. If you are not an addressee, any disclosure, copy,
>>> distribution, or use of the contents of this message is prohibited. If you
>>> have received this email in error please notify the sender by reply e-mail
>>> and delete the original message and any copies. © 2015 j2 Global, Inc. All
>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe ®
>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>> affiliates.
>
4:16 p.m.
On Sat, May 21, 2016 at 12:53 AM, Bill James <bill.james(a)j2.com> wrote:
maybe the other doc is old but it says:
"And a feature I intentionally removed in RHEL 7 was importing KVM → KVM"
which is what I am doing. raw disk KVM to ovirt.
Yes I can copy the disk image over the top of a ovirt disk image, but the
import script seemed cleaner.
Does virt-v2v try to convert the KVM image to KVM image or does it just
import it?
ovirt-4.0 beta released 2 days ago support this.
One issue, a new package is needed which is not required yet by vdsm,
you will have to install it manually from here:
https://github.com/oVirt/ovirt-imageio/archive/master.zip
To install the package, do:
cd ovirt-imageio/common
make rpm
yum install dist/ovirt-imageio-common-0.1-1.noarch.rpm
This issue will be resolved soon.
Nir
On 5/20/16 2:44 PM, Nir Soffer wrote:
>
> On Fri, May 20, 2016 at 11:48 PM, Bill James <bill.james(a)j2.com> wrote:
>>
>> I had added user = "root" because we use the import-to-ovirt.pl to
move
>> Vms
>> from our old virtual platform to ovirt.
>> My understanding was that was required for the to work.
>> Is that not true or is the import script not worth the headaches caused?
>>
>> (https://rwmj.wordpress.com/2015/09/18/importing-kvm-guests-to-ovirt-or-rhev/)
>
> I don't know anything about this solution, adding Richard to add more
> info.
>
> If you run 3.6, you can use v2v to import from other systems.
> Adding Shahar to add into on v2v.
>
> Nir
>
>> [root@ovirt3 prod 4c4bfdf7-bc70-41b2-ab58-710ff8e850bf]# grep ^user
>> /etc/libvirt/qemu.conf
>> user = "root"
>>
>> I'm assuming that's what sets the qemu user.
>>
>>
>>
>> When I first tried using that script without setting "user = root" it
>> didn't
>> work.
>>
>>
>>
>>
>> On 5/20/16 1:16 PM, Nir Soffer wrote:
>>>
>>> On Fri, May 20, 2016 at 10:41 PM, Bill James <bill.james(a)j2.com>
wrote:
>>>>
>>>> attached output from one host. others look similar.
>>>
>>> Your qemu runs as *root*:
>>>
>>> root root root root qemu qemu qemu qemu /usr/libexec/qemu-kvm
>>>
>>> Here is the output from normal installation:
>>>
>>> qemu qemu qemu qemu qemu qemu qemu
>>> qemu /usr/libexec/qemu-kvm
>>>
>>> I guess that gluster is configure with "option root-squashing on"
so you
>>> practically run as "nobody", and you are not in the kvm group.
>>>
>>> Running qemu as root is also a security risk, if there is a security bug
>>> in qemu
>>> a vm can use it to compromise your host or other vms.
>>>
>>> Maybe you can configure gluster to treat root as vdsm using
>>>
>>> option translate-uid 0=36
>>>
>>> See
>>>
>>>
http://www.gluster.org/community/documentation/index.php/Translators/feat...
>>>
>>> But a better solution is to run qemu as qemu.
>>>
>>> Adding Sahina to advise about gluster configuration.
>>>
>>> Nir
>>>
>>>>
>>>>
>>>> On 5/20/16 11:47 AM, Nir Soffer wrote:
>>>>
>>>> On Fri, May 20, 2016 at 9:25 PM, Bill James <bill.james(a)j2.com>
wrote:
>>>>>
>>>>> yes
>>>>>
>>>>> [root@ovirt2 prod .shard]# sestatus
>>>>> SELinux status: disabled
>>>>>
>>>>> [root@ovirt3 prod ~]# sestatus
>>>>> SELinux status: disabled
>>>>
>>>>
>>>> Can you share output of:
>>>>
>>>> ps -e -o euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
>>>> 'qemu|libvirt'
>>>> ps auxe | egrep 'qemu|libvirt'
>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 5/20/16 11:13 AM, Nir Soffer wrote:
>>>>>
>>>>> On Fri, May 20, 2016 at 9:02 PM, Bill James <bill.james(a)j2.com>
wrote:
>>>>>>
>>>>>> [root@ovirt1 prod ~]# sestatus
>>>>>> SELinux status: disabled
>>>>>
>>>>>
>>>>> Same on ovirt2?
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 5/20/16 10:49 AM, Nir Soffer wrote:
>>>>>>
>>>>>> This smells like selinux issues, did yoi try with permissive
mode?
>>>>>>
>>>>>> בתאריך 20 במאי 2016 7:59 אחה״צ, "Bill James"
<bill.james(a)j2.com>
>>>>>> כתב:
>>>>>>>
>>>>>>> Nobody has any ideas or thoughts on how to troubleshoot?
>>>>>>>
>>>>>>> why does qemu group work but not kvm when qemu is part of kvm
group?
>>>>>>>
>>>>>>> [root@ovirt1 prod vdsm]# grep qemu /etc/group
>>>>>>> cdrom:x:11:qemu
>>>>>>> kvm:x:36:qemu,sanlock
>>>>>>> qemu:x:107:vdsm,sanlock
>>>>>>>
>>>>>>>
>>>>>>> On 5/18/16 3:47 PM, Bill James wrote:
>>>>>>>>
>>>>>>>> another data point.
>>>>>>>> Changing just owner to qemu doesn't help.
>>>>>>>> Changing just group to qemu does. VM starts fine after
that.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 05/18/2016 11:49 AM, Bill James wrote:
>>>>>>>>>
>>>>>>>>> Some added info. This issue seems to be just like
this bug:
>>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1052114
>>>>>>>>>
>>>>>>>>> I have verified that chown qemu:qemu of disk image
also fixes the
>>>>>>>>> startup issue.
>>>>>>>>> I'm using raw, not qcow images.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> [root@ovirt2 prod
a7af2477-4a19-4f01-9de1-c939c99e53ad]# qemu-img
>>>>>>>>> info 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>>> image: 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>>> file format: raw
>>>>>>>>> virtual size: 20G (21474836480 bytes)
>>>>>>>>> disk size: 1.9G
>>>>>>>>> [root@ovirt2 prod
a7af2477-4a19-4f01-9de1-c939c99e53ad]# ls -l
>>>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>>> -rw-rw---- 1 qemu qemu 21474836480 May 18 11:38
>>>>>>>>> 253f9615-f111-45ca-bdce-cbc9e70406df
>>>>>>>>>
>>>>>>>>> (default perms = vdsm:kvm)
>>>>>>>>>
>>>>>>>>> qemu-img-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>>>> qemu-kvm-ev-2.3.0-31.el7_2.4.1.x86_64
>>>>>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Ideas??
>>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users(a)ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>> This email, its contents and attachments contain information from
j2
>>>>>> Global, Inc. and/or its affiliates which may be privileged,
>>>>>> confidential or
>>>>>> otherwise protected from disclosure. The information is intended
to
>>>>>> be for
>>>>>> the addressee(s) only. If you are not an addressee, any
disclosure,
>>>>>> copy,
>>>>>> distribution, or use of the contents of this message is
prohibited.
>>>>>> If you
>>>>>> have received this email in error please notify the sender by
reply
>>>>>> e-mail
>>>>>> and delete the original message and any copies. © 2015 j2
Global,
>>>>>> Inc. All
>>>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®,
>>>>>> KeepItSafe ®
>>>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and
its
>>>>>> affiliates.
>>>>>
>>>>>
>>>>>
>>>>> This email, its contents and attachments contain information from j2
>>>>> Global, Inc. and/or its affiliates which may be privileged,
>>>>> confidential or
>>>>> otherwise protected from disclosure. The information is intended to
be
>>>>> for
>>>>> the addressee(s) only. If you are not an addressee, any disclosure,
>>>>> copy,
>>>>> distribution, or use of the contents of this message is prohibited.
If
>>>>> you
>>>>> have received this email in error please notify the sender by reply
>>>>> e-mail
>>>>> and delete the original message and any copies. © 2015 j2 Global,
Inc.
>>>>> All
>>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®,
>>>>> KeepItSafe ®
>>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>>>> affiliates.
>>>>
>>>>
>>>>
>>>> This email, its contents and attachments contain information from j2
>>>> Global, Inc. and/or its affiliates which may be privileged,
>>>> confidential or
>>>> otherwise protected from disclosure. The information is intended to be
>>>> for
>>>> the addressee(s) only. If you are not an addressee, any disclosure,
>>>> copy,
>>>> distribution, or use of the contents of this message is prohibited. If
>>>> you
>>>> have received this email in error please notify the sender by reply
>>>> e-mail
>>>> and delete the original message and any copies. © 2015 j2 Global, Inc.
>>>> All
>>>> rights reserved. eFax ®, eVoice ®, Campaigner ®, FuseMail ®, KeepItSafe
>>>> ®
>>>> and Onebox ® are ! registere d trademarks of j2 Global, Inc. and its
>>>> affiliates.
>>
>>
2:52 a.m.
On Fri, May 20, 2016 at 02:53:02PM -0700, Bill James wrote:
maybe the other doc is old but it says:
"And a feature I intentionally removed in RHEL 7 was importing KVM → KVM"
which is what I am doing. raw disk KVM to ovirt.
Yes I can copy the disk image over the top of a ovirt disk image,
but the import script seemed cleaner.
Does virt-v2v try to convert the KVM image to KVM image or does it
just import it?
Virt-v2v will now refuse to do this at all (except if you "trick" it
as I did in my blog posting), but if we allowed it then it would make
all kinds of modifications inside the guest which you don't need and
have at least the potential to break things.
The import-to-ovirt.pl script is/was intended as a simple import
script which you should use instead in the case where guests already
run on KVM and therefore don't need driver etc conversion/
installation.
As Nir said in the other reply, oVirt 4.0 has native import
functionality and the import script is not needed at all for KVM ->
oVirt imports.
Virt-v2v should only be used for foreign hypervisor imports, such as
VMware, Xen or Hyper-V to oVirt.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
10 a.m.
thank you very much for the reply.
My main question now is does it required to use "user = root" in
qemu.conf for the import script to work?
I know in my earlier testing I got a permissions error when doing import
until I added the root user line.
I guess I'll take it out and give it a try.
On 05/21/2016 01:52 AM, Richard W.M. Jones wrote:
On Fri, May 20, 2016 at 02:53:02PM -0700, Bill James wrote:
> maybe the other doc is old but it says:
> "And a feature I intentionally removed in RHEL 7 was importing KVM → KVM"
> which is what I am doing. raw disk KVM to ovirt.
>
> Yes I can copy the disk image over the top of a ovirt disk image,
> but the import script seemed cleaner.
>
> Does virt-v2v try to convert the KVM image to KVM image or does it
> just import it?
Virt-v2v will now refuse to do this at all (except if you "trick" it
as I did in my blog posting), but if we allowed it then it would make
all kinds of modifications inside the guest which you don't need and
have at least the potential to break things.
The import-to-ovirt.pl script is/was intended as a simple import
script which you should use instead in the case where guests already
run on KVM and therefore don't need driver etc conversion/
installation.
As Nir said in the other reply, oVirt 4.0 has native import
functionality and the import script is not needed at all for KVM ->
oVirt imports.
Virt-v2v should only be used for foreign hypervisor imports, such as
VMware, Xen or Hyper-V to oVirt.
Rich.
Cloud Services for Business www.j2.com
j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights
reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered
trademarks of j2 Global, Inc. and its affiliates.
10:17 a.m.
On Mon, May 23, 2016 at 09:00:48AM -0700, Bill James wrote:
thank you very much for the reply.
My main question now is does it required to use "user = root" in
qemu.conf for the import script to work?
I haven't knowingly modified qemu.conf in my life, so likely the
answer is no.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
12:18 p.m.
I just tried importing using the import script and got this error:
[root@ovirt1 prod ~]# import-to-ovirt.pl
/mnt/tmp/puppetdb.j2noc.com.disk.xm
/rhev/data-center/mnt/j2hqnap02:_vol_ovirt__inside__export_exportTemplates
libvirt needs authentication to connect to libvirt URI qemu:///system
(see also: http://libvirt.org/auth.html http://libvirt.org/uri.html)
Please enter your authentication name: vdsm@ovirt
Please enter your password:
could not create appliance through libvirt.
Try running qemu directly without libvirt using this environment variable:
export LIBGUESTFS_BACKEND=direct
Original error from libvirt: internal error: process exited while
connecting to monitor: 2016-05-24T18:10:21.651694Z qemu-kvm: -drive
file=/tmp/libguestfsWx9FbI/overlay1,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=unsafe:
Could not open '/tmp/libguestfsWx9FbI/overlay1': Permission denied
[code=1 domain=10] at /usr/local/bin/import-to-ovirt.pl line 233.
I believe this is the same error that prompted me to use "user = root"
in qemu.conf, but sounds like there is a better resolution?
[root@ovirt1 prod qemu]# less guestfs-7ogk4gszrvsyv7j7.log
2016-05-24 18:10:21.617+0000: starting up libvirt version: 1.2.17,
package: 13.el7_2.4 (CentOS BuildSystem <http://bugs.centos.org>;,
2016-03-31-16:56:26, worker1.bsys.centos.org), qemu version: 2.3.0
(qemu-kvm-ev-2.3.0-31.el7_2.4.1)
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
QEMU_AUDIO_DRV=none TMPDIR=/var/tmp /usr/libexec/qemu-kvm -name
guestfs-7ogk4gszrvsyv7j7 -S -machine
pc-i440fx-rhel7.2.0,accel=kvm,usb=off -cpu host -m 500 -realtime
mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid
ceeecdda-e44e-4227-990d-84261d0161aa -nographic -no-user-config
-nodefaults -device sga -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-guestfs-7ogk4gszrvsyv7j7/monitor.sock,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc
base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet
-no-reboot -no-acpi -boot strict=on -kernel
/var/tmp/.guestfs-0/appliance.d/kernel -initrd
/var/tmp/.guestfs-0/appliance.d/initrd -append panic=1 console=ttyS0
udevtimeout=6000 udev.event-timeout=6000 no_timer_check acpi=off
printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 TERM=screen
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2 -device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 -drive
file=/tmp/libguestfsWx9FbI/overlay1,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
-drive
file=/tmp/libguestfsWx9FbI/overlay2,if=none,id=drive-scsi0-0-1-0,format=qcow2,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=1,lun=0,drive=drive-scsi0-0-1-0,id=scsi0-0-1-0
-chardev socket,id=charserial0,path=/tmp/libguestfsWx9FbI/console.sock
-device isa-serial,chardev=charserial0,id=serial0 -chardev
socket,id=charchannel0,path=/tmp/libguestfsWx9FbI/guestfsd.sock -device
virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.libguestfs.channel.0
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 -msg timestamp=on
Domain id=5 is tainted: custom-argv
Domain id=5 is tainted: host-cpu
2016-05-24T18:10:21.651694Z qemu-kvm: -drive
file=/tmp/libguestfsWx9FbI/overlay1,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=unsafe:
Could not open '/tmp/libguestfsWx9FbI/overlay1': Permission denied
2016-05-24 18:10:21.825+0000: shutting down
[root@ovirt1 prod ~]# ps -e -o
euser,user,suser,fuser,egroup,rgroup,sgroup,fgroup,cmd | egrep
'qemu-kvm'|head -2
qemu qemu qemu qemu qemu qemu qemu qemu
/usr/libexec/qemu-kvm -name billj6-1.j2noc.com -S -machine
pc-i440fx-rhel7.2.0,accel=kvm,usb=off -cpu SandyBridge -m
size=2097152k,slots=16,maxmem=4294967296k -realtime mlock=off -smp
1,maxcpus=16,sockets=16,cores=1,threads=1 -numa
node,nodeid=0,cpus=0,mem=2048 -uuid 60ded316-aa18-4eda-9c52-16016d026e1a
-smbios type=1,manufacturer=oVirt,product=oVirt
Node,version=7-2.1511.el7.centos.2.10,serial=30343536-3138-584D-51....
On 05/23/2016 09:17 AM, Richard W.M. Jones wrote:
On Mon, May 23, 2016 at 09:00:48AM -0700, Bill James wrote:
> thank you very much for the reply.
> My main question now is does it required to use "user = root" in
> qemu.conf for the import script to work?
I haven't knowingly modified qemu.conf in my life, so likely the
answer is no.
Rich.
Cloud Services for Business www.j2.com
j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox
This email, its contents and attachments contain information from j2 Global, Inc. and/or
its affiliates which may be privileged, confidential or otherwise protected from
disclosure. The information is intended to be for the addressee(s) only. If you are not an
addressee, any disclosure, copy, distribution, or use of the contents of this message is
prohibited. If you have received this email in error please notify the sender by reply
e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights
reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered
trademarks of j2 Global, Inc. and its affiliates.
3:29 p.m.
As it says in the error message:
Try running qemu directly without libvirt using this environment
variable:
export LIBGUESTFS_BACKEND=direct
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
2904
days inactive
2911
days old
19 comments
3 participants
participants (3)
-
Bill James -
Nir Soffer -
Richard W.M. Jones