Hi, I deployed an HCI of three nodes using ovirt 4.3 on a flat network at the beginning, now we need to use VLAN on the management network. I have ovirtmgmt over bond2, this bond will have three vlans : vlan 10 for management, vlan20 for DMZ and vlan30 for DMZ2. On the switch, I did configure the concerned ports to support ; the native vlan (untagged), the vlan10 (tagged), ...etc. Then I activated the tag on the ovirtmgmt network on the web UI, I did lose connexion to the hypervisors and things got weird, I then put my machine on vlan10, I saw that two of my hypervisors had their network configuration modified to use the vlan10, but not the hypervisor where the VM-engine was running. I created the vlan manually on that hypervisor, then I started the VM-Manager, all hosts were recognized. Then I stopped, then started the platforme again. Still the same problem, two hosts are correct with their vlan : bond2.10 created, but the third no vlan. Doing the configuration manually works, but it does not survive reboot, is there a way to force vdsm to accept the new configuration on that faulty host? Regards.
Once a host is in oVirt , you should not change the network ... or that's what I have been told. You should remove the host from oVirt , do your configurations and then add the host back. Best Regards, Strahil Nikolov В четвъртък, 24 септември 2020 г., 01:43:40 Гринуич+3, wodel youchi <wodel.youchi@gmail.com> написа: Hi, I deployed an HCI of three nodes using ovirt 4.3 on a flat network at the beginning, now we need to use VLAN on the management network. I have ovirtmgmt over bond2, this bond will have three vlans : vlan 10 for management, vlan20 for DMZ and vlan30 for DMZ2. On the switch, I did configure the concerned ports to support ; the native vlan (untagged), the vlan10 (tagged), ...etc. Then I activated the tag on the ovirtmgmt network on the web UI, I did lose connexion to the hypervisors and things got weird, I then put my machine on vlan10, I saw that two of my hypervisors had their network configuration modified to use the vlan10, but not the hypervisor where the VM-engine was running. I created the vlan manually on that hypervisor, then I started the VM-Manager, all hosts were recognized. Then I stopped, then started the platforme again. Still the same problem, two hosts are correct with their vlan : bond2.10 created, but the third no vlan. Doing the configuration manually works, but it does not survive reboot, is there a way to force vdsm to accept the new configuration on that faulty host? Regards. _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CZAWDO2TJOK6WC...
participants (2)
-
Strahil Nikolov -
wodel youchi