Hosted engine installation oVirt 4.5 initialize lockspace volume
Hello, hope, you are doing well. I try to install a new hosted engine on my environment to switch the storage this engine. I use following command to deploy the instance: hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true Everything works fine, except the initialization of lockspace volume. Here I get: ``` [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set the name for add_host] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch the value of HOST_KEY_CHECKING] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get the username running the deploy] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start ovirt-ha-broker service on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Workaround for ovirt-ha-broker start failures] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 5, "changed": true, "cmd": ["hosted-engine", "--reinitialize-lock space", "--force"], "delta": "0:00:00.269920", "end": "2024-03-20 14:43:00.366557", "msg": "non-zero return code", "rc" : 1, "start": "2024-03-20 14:43:00.096637", "stderr": "Traceback (most recent call last):\n File \"/usr/lib64/python3. 6/runpy.py\", line 193, in _run_module_as_main\n \"__main__\", mod_spec)\n File \"/usr/lib64/python3.6/runpy.py\", line 85, in _run_code\n exec(code, run_globals)\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup /reinitialize_lockspace.py\", line 30, in <module>\n ha_cli.reset_lockspace(force)\n File \"/usr/lib/python3.6/site -packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace\n stats = broker.get_stats_from_st orage()\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", line 148, in get_stats_f rom_storage\n result = self._proxy.get_stats()\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1112, in __ca ll__\n return self.__send(self.__name, args)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1452, in __requ est\n verbose=self.__verbose\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1154, in request\n return se lf.single_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1166, i n single_request\n http_conn = self.send_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3. 6/xmlrpc/client.py\", line 1279, in send_request\n self.send_content(connection, request_body)\n File \"/usr/lib64/ python3.6/xmlrpc/client.py\", line 1309, in send_content\n connection.endheaders(request_body)\n File \"/usr/lib64/ python3.6/http/client.py\", line 1268, in endheaders\n self._send_output(message_body, encode_chunked=encode_chunked )\n File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output\n self.send(msg)\n File \"/usr/lib64/ python3.6/http/client.py\", line 982, in send\n self.connect()\n File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_ha/lib/unixrpc.py\", line 76, in connect\n self.sock.connect(base64.b16decode(self.host))\nFileNotFoundErr or: [Errno 2] No such file or directory", "stderr_lines": ["Traceback (most recent call last):", " File \"/usr/lib64/p ython3.6/runpy.py\", line 193, in _run_module_as_main", " \"__main__\", mod_spec)", " File \"/usr/lib64/python3.6/r unpy.py\", line 85, in _run_code", " exec(code, run_globals)", " File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_setup/reinitialize_lockspace.py\", line 30, in <module>", " ha_cli.reset_lockspace(force)", " File \"/usr /lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace", " stats = bro ker.get_stats_from_storage()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", l ine 148, in get_stats_from_storage", " result = self._proxy.get_stats()", " File \"/usr/lib64/python3.6/xmlrpc/clie nt.py\", line 1112, in __call__", " return self.__send(self.__name, args)", " File \"/usr/lib64/python3.6/xmlrpc/cl ient.py\", line 1452, in __request", " verbose=self.__verbose", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", l ine 1154, in request", " return self.single_request(host, handler, request_body, verbose)", " File \"/usr/lib64/pyt hon3.6/xmlrpc/client.py\", line 1166, in single_request", " http_conn = self.send_request(host, handler, request_bod y, verbose)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1279, in send_request", " self.send_content(co nnection, request_body)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1309, in send_content", " connecti on.endheaders(request_body)", " File \"/usr/lib64/python3.6/http/client.py\", line 1268, in endheaders", " self._se nd_output(message_body, encode_chunked=encode_chunked)", " File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output", " self.send(msg)", " File \"/usr/lib64/python3.6/http/client.py\", line 982, in send", " self.co nnect()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py\", line 76, in connect", " self.sock.connect(base64.b16decode(self.host))", "FileNotFoundError: [Errno 2] No such file or directory"], "stdout": "", "stdout_lines": []} ``` And I dont know, what is the reason. I zeroed the iscsi target, rebooted the hypervisor and updated all software packages. ``` [root@hypervisor01 ~]# rpm -qa|grep ovirt-host ovirt-hosted-engine-setup-2.6.5-1.el8.noarch ovirt-host-dependencies-4.5.0-3.el8.x86_64 ovirt-hosted-engine-ha-2.5.0-1.el8.noarch ovirt-host-4.5.0-3.el8.x86_64 ``` I tried the deployment without the ansible arguments. Unfortunately, the same error comes up. What can I do to solve this? Thanks very much balu
Have you checked if the initiator name is proper IQN and unique ? Best Regards, Strahil Nikolov Hello, hope, you are doing well. I try to install a new hosted engine on my environment to switch the storage this engine. I use following command to deploy the instance: hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true Everything works fine, except the initialization of lockspace volume. Here I get: ``` [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set the name for add_host] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch the value of HOST_KEY_CHECKING] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get the username running the deploy] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start ovirt-ha-broker service on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Workaround for ovirt-ha-broker start failures] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 5, "changed": true, "cmd": ["hosted-engine", "--reinitialize-lock space", "--force"], "delta": "0:00:00.269920", "end": "2024-03-20 14:43:00.366557", "msg": "non-zero return code", "rc" : 1, "start": "2024-03-20 14:43:00.096637", "stderr": "Traceback (most recent call last):\n File \"/usr/lib64/python3. 6/runpy.py\", line 193, in _run_module_as_main\n \"__main__\", mod_spec)\n File \"/usr/lib64/python3.6/runpy.py\", line 85, in _run_code\n exec(code, run_globals)\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup /reinitialize_lockspace.py\", line 30, in <module>\n ha_cli.reset_lockspace(force)\n File \"/usr/lib/python3.6/site -packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace\n stats = broker.get_stats_from_st orage()\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", line 148, in get_stats_f rom_storage\n result = self._proxy.get_stats()\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1112, in __ca ll__\n return self.__send(self.__name, args)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1452, in __requ est\n verbose=self.__verbose\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1154, in request\n return se lf.single_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1166, i n single_request\n http_conn = self.send_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3. 6/xmlrpc/client.py\", line 1279, in send_request\n self.send_content(connection, request_body)\n File \"/usr/lib64/ python3.6/xmlrpc/client.py\", line 1309, in send_content\n connection.endheaders(request_body)\n File \"/usr/lib64/ python3.6/http/client.py\", line 1268, in endheaders\n self._send_output(message_body, encode_chunked=encode_chunked )\n File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output\n self.send(msg)\n File \"/usr/lib64/ python3.6/http/client.py\", line 982, in send\n self.connect()\n File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_ha/lib/unixrpc.py\", line 76, in connect\n self.sock.connect(base64.b16decode(self.host))\nFileNotFoundErr or: [Errno 2] No such file or directory", "stderr_lines": ["Traceback (most recent call last):", " File \"/usr/lib64/p ython3.6/runpy.py\", line 193, in _run_module_as_main", " \"__main__\", mod_spec)", " File \"/usr/lib64/python3.6/r unpy.py\", line 85, in _run_code", " exec(code, run_globals)", " File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_setup/reinitialize_lockspace.py\", line 30, in <module>", " ha_cli.reset_lockspace(force)", " File \"/usr /lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace", " stats = bro ker.get_stats_from_storage()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", l ine 148, in get_stats_from_storage", " result = self._proxy.get_stats()", " File \"/usr/lib64/python3.6/xmlrpc/clie nt.py\", line 1112, in __call__", " return self.__send(self.__name, args)", " File \"/usr/lib64/python3.6/xmlrpc/cl ient.py\", line 1452, in __request", " verbose=self.__verbose", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", l ine 1154, in request", " return self.single_request(host, handler, request_body, verbose)", " File \"/usr/lib64/pyt hon3.6/xmlrpc/client.py\", line 1166, in single_request", " http_conn = self.send_request(host, handler, request_bod y, verbose)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1279, in send_request", " self.send_content(co nnection, request_body)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1309, in send_content", " connecti on.endheaders(request_body)", " File \"/usr/lib64/python3.6/http/client.py\", line 1268, in endheaders", " self._se nd_output(message_body, encode_chunked=encode_chunked)", " File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output", " self.send(msg)", " File \"/usr/lib64/python3.6/http/client.py\", line 982, in send", " self.co nnect()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py\", line 76, in connect", " self.sock.connect(base64.b16decode(self.host))", "FileNotFoundError: [Errno 2] No such file or directory"], "stdout": "", "stdout_lines": []} ``` And I dont know, what is the reason. I zeroed the iscsi target, rebooted the hypervisor and updated all software packages. ``` [root@hypervisor01 ~]# rpm -qa|grep ovirt-host ovirt-hosted-engine-setup-2.6.5-1.el8.noarch ovirt-host-dependencies-4.5.0-3.el8.x86_64 ovirt-hosted-engine-ha-2.5.0-1.el8.noarch ovirt-host-4.5.0-3.el8.x86_64 ``` I tried the deployment without the ansible arguments. Unfortunately, the same error comes up. What can I do to solve this? Thanks very much balu _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JAM25WIFO2ZPEX...
participants (2)
-
lbayerlein＠lbayerlein.de -
Strahil Nikolov