Additionally you can also install official Prometheus Node_Exporter on each of your KVM hosts and that will give you tons of operating system metrics. This is not "ovirt aware", so you will not see any ovirt objects related metrics but will allow you to keep an eye on your kvm hosts performance. Binaries: https://github.com/prometheus/node_exporter Example Dashboard: https://grafana.com/grafana/dashboards/1860 Cheers, Michal Michał Gutowski Principal Solutions Engineer, EMEA +48 665 222 979 Oracle Open Cloud Infrastructure Software - Linux & Virtualization

On 20 Nov 2020, at 18:30, Vincent Royer <vincent@epicenergy.ca> wrote:

I found it much easier to ignore all the DataWarehouse stuff and used a project called prometheus Ovirt Exporter, spun up in a docker host, and use the prom datasource in Grafana. I was up and running with good Ovirt metrics in minutes.

Vincent Royer 778-825-1057

SUSTAINABLE MOBILE ENERGY SOLUTIONS

On Thu, Nov 19, 2020 at 10:46 PM Vrgotic, Marko <M.Vrgotic@activevideo.com> wrote: Dear oVirt,

We are currently running oVirt 4.3 and upgrade/migration to 4.4 won’t be possible for few more months.

I am looking into guidelines, how to, for setting up Grafana using DataWarehouse as data source.

Did anyone already did this, and would be willing to share the steps?

Kindly awaiting your reply.

-----

kind regards/met vriendelijke groeten

Marko Vrgotic Sr. System Engineer @ System Administration

ActiveVideo

o: +31 (35) 6774131

m: +31 (65) 5734174

e: m.vrgotic@activevideo.com w: www.activevideo.com

ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LNTAUADVSD33ND... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://urldefense.com/v3/__https://www.ovirt.org/privacy-policy.html__;!!Gq... oVirt Code of Conduct: https://urldefense.com/v3/__https://www.ovirt.org/community/about/community-... List Archives: https://urldefense.com/v3/__https://lists.ovirt.org/archives/list/users@ovir...

Dear oVirt folks, Thank you all for suggestions. I will give it a go and see how far I get. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic@activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Yedidyah Bar David <didi@redhat.com> Date: Sunday, 22 November 2020 at 08:39 To: "Vrgotic, Marko" <M.Vrgotic@activevideo.com> Cc: "users@ovirt.org" <users@ovirt.org> Subject: Re: [ovirt-users] oVirt 4.3 DWH with Grafana ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** On Fri, Nov 20, 2020 at 8:45 AM Vrgotic, Marko <M.Vrgotic@activevideo.com<mailto:M.Vrgotic@activevideo.com>> wrote: Dear oVirt, We are currently running oVirt 4.3 and upgrade/migration to 4.4 won’t be possible for few more months. I am looking into guidelines, how to, for setting up Grafana using DataWarehouse as data source. Did anyone already did this, and would be willing to share the steps? AFAIU this is definitely not tested/recommended/supported, but the current (4.4) dashboards use only 4.3 dwh compatibility views. So in theory, 4.4 grafana setup can work against your 4.3 engine/dwh without problems. So you can try something like: 1. Install el8 on some machine 2. Install ovirt-release (4.4!) 3. Install ovirt-engine-dwh-grafana-integration-setup. I *think*, didn't try, that it would carry with it all the dependencies it needs. 4. Run engine-setup. When prompted, only accept "Configure grafana?", and reply "No" to everything else 5. Follow the other prompts as applicable This should be enough. Not sure about the commands to add SSO on the engine machine. Perhaps better verify this first against a test engine (can be on another el7/ovirt4.3 VM with no hosts). But, repeating: this isn't recommended. Did you consider upgrading only your engine, and keep your hosts 4.3 until you can upgrade them later? Best regards, -- Didi

Hi Michal, This is fantastic. Thank you. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic@activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Michal Gutowski <michal.gutowski@oracle.com> Date: Tuesday, 24 November 2020 at 17:26 To: "Vrgotic, Marko" <M.Vrgotic@activevideo.com> Cc: Yedidyah Bar David <didi@redhat.com>, "users@ovirt.org" <users@ovirt.org> Subject: Re: [ovirt-users] oVirt 4.3 DWH with Grafana ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** Hi Marko, I've tested this myself as I like playing with various Grafana use-cases and following steps allow you to set up Grafana Monitoring for your oVirt 4.3 environment and re-use all Grafana Dashboards from latest oVirt 4.4 on a previous release. 1. Allowing Grafana to connect to oVirt DWH database (Data Warehouse) Login to the oVirt engine 4.3 and create a user "grafana" with password "grafana" that will get a read-only access to the ovirt_engine_history database and will be able to use public schema # su - postgres -c 'scl enable rh-postgresql10 bash' # psql -U postgres -c "CREATE ROLE grafana WITH LOGIN ENCRYPTED PASSWORD 'grafana';" -d ovirt_engine_history # psql -U postgres -c "GRANT CONNECT ON DATABASE ovirt_engine_history TO grafana;" # psql -U postgres -c "GRANT USAGE ON SCHEMA public TO grafana;" ovirt_engine_history Generate the rest of the permissions that will be granted to the newly created user and save them to a file: # psql -U postgres -c "SELECT 'GRANT SELECT ON ' || relname || ' TO grafana;' FROM pg_class JOIN pg_namespace ON pg_namespace.oid = pg_class.relnamespace WHERE nspname = 'public' AND relkind IN ('r', 'v');" --pset=tuples_only=on ovirt_engine_history > grant.sql Use the file you created in the previous step to grant permissions to the newly created user: # psql -U postgres -f grant.sql ovirt_engine_history Remove the file you used to grant permissions: # rm grant.sql Exit the postgres user shell by pressing Ctrl+d Add the following lines for the newly created user to /var/opt/rh/rh-postgresql10/lib/pgsql/data/pg_hba.conf preceding the line beginning local all all host ovirt_engine_history grafana 0.0.0.0/0 md5 host ovirt_engine_history grafana ::0/0 md5 Reload postgres service # systemctl reload rh-postgresql10-postgresql 2. Installing Grafana You can install Grafana directly on the oVirt Engine machine (this is how it's done in oVirt 4.4) or on a separate machine. Following steps shows how you can install Grafana on a Oracle Linux 7 server. Note: Oracle provides Grafana in the OLCNE yum repository - you only need to install the repository definition package to pickup Grafana and it's dependencies. # yum install oraclelinux-release-el7 # yum install oracle-olcne-release-el7 # yum-config-manager --enable ol7_optional_latest ol7_olcne11 # yum install grafana # systemctl enable --now grafana-server 3. Adding oVirt DWH database as Data Source in Grafana Login to Grafana (default port 3000) and navigate to Configuration -> DataSources and click on Add Data Source button. Select PostgreSQL source and use the following settings (adjust the Host IP address to match your oVirt Engine IP but do not change the Name): Name: oVirt DWH Host: your-engine-ip-address:5432 user: grafana pass: grafana SSL mode: disable 4. Importing Dashboards from oVirt 4.4 Download Grafana Dashboards from oVirt 4.4 repository: https://github.com/oVirt/ovirt-dwh/tree/master/packaging/conf/grafana-dashbo... You can now import them in Grafana by navigating to Create -> Import and clicking on Upload .json file or by simply pasting JSON content. I've tested this on my OLVM/oVirt 4.3 and works perfectly well. Have fun! Michal Michał Gutowski Principal Solutions Engineer, EMEA +48 665 222 979 Oracle Open Cloud Infrastructure Software - Linux & Virtualization On 24 Nov 2020, at 11:53, Vrgotic, Marko <M.Vrgotic@activevideo.com<mailto:M.Vrgotic@activevideo.com>> wrote: Dear oVirt folks, Thank you all for suggestions. I will give it a go and see how far I get. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: m.vrgotic@activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<https://urldefense.com/v3/__http:/www.activevideo.com__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwIzsG6Wq$> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Yedidyah Bar David <didi@redhat.com<mailto:didi@redhat.com>> Date: Sunday, 22 November 2020 at 08:39 To: "Vrgotic, Marko" <M.Vrgotic@activevideo.com<mailto:M.Vrgotic@activevideo.com>> Cc: "users@ovirt.org<mailto:users@ovirt.org>" <users@ovirt.org<mailto:users@ovirt.org>> Subject: Re: [ovirt-users] oVirt 4.3 DWH with Grafana ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** On Fri, Nov 20, 2020 at 8:45 AM Vrgotic, Marko <M.Vrgotic@activevideo.com<mailto:M.Vrgotic@activevideo.com>> wrote: Dear oVirt, We are currently running oVirt 4.3 and upgrade/migration to 4.4 won’t be possible for few more months. I am looking into guidelines, how to, for setting up Grafana using DataWarehouse as data source. Did anyone already did this, and would be willing to share the steps? AFAIU this is definitely not tested/recommended/supported, but the current (4.4) dashboards use only 4.3 dwh compatibility views. So in theory, 4.4 grafana setup can work against your 4.3 engine/dwh without problems. So you can try something like: 1. Install el8 on some machine 2. Install ovirt-release (4.4!) 3. Install ovirt-engine-dwh-grafana-integration-setup. I *think*, didn't try, that it would carry with it all the dependencies it needs. 4. Run engine-setup. When prompted, only accept "Configure grafana?", and reply "No" to everything else 5. Follow the other prompts as applicable This should be enough. Not sure about the commands to add SSO on the engine machine. Perhaps better verify this first against a test engine (can be on another el7/ovirt4.3 VM with no hosts). But, repeating: this isn't recommended. Did you consider upgrading only your engine, and keep your hosts 4.3 until you can upgrade them later? Best regards, -- Didi _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://urldefense.com/v3/__https://www.ovirt.org/privacy-policy.html__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwMWrWYxs$<https://urldefense.com/v3/__https:/www.ovirt.org/privacy-policy.html__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwMWrWYxs$> oVirt Code of Conduct: https://urldefense.com/v3/__https://www.ovirt.org/community/about/community-guidelines/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwKA75xLc$<https://urldefense.com/v3/__https:/www.ovirt.org/community/about/community-guidelines/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwKA75xLc$> List Archives: https://urldefense.com/v3/__https://lists.ovirt.org/archives/list/users@ovirt.org/message/QSBZGMZ3NXRYQWO7ZH6O4NRUU4FBUXI7/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwEcyLO4I$<https://urldefense.com/v3/__https:/lists.ovirt.org/archives/list/users@ovirt.org/message/QSBZGMZ3NXRYQWO7ZH6O4NRUU4FBUXI7/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwEcyLO4I$>

Hi Nardus, We opened the following [RFE] Add Data Source variable to all dashboards <https://bugzilla.redhat.com/show_bug.cgi?id=1952424>, where we plan to add a "Datasource" variable to each dashboard. This will allow choosing a data source in each dashboard from your data sources list. Best regards, -- Shirly Radco BI Principal Software Engineer Red Hat <https://www.redhat.com/> <https://www.redhat.com/> On Tue, Apr 13, 2021 at 4:44 PM Nardus Geldenhuys <nardusg@gmail.com> wrote:

Hey Michal

Hope you are well. Thank you so much for this write up and all the work you put into it.

Do you have a easy way of using different data sources, more than one oVirt engine DWH ? Or will I have to adapt all the dashboards to the different data sources?

Thanks again

Nardus _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WVH2NIPY56YCTC...

The oVirt version I'm using is 4.3, and I get an error when I import JSON. pq: relation"v4_4_latest_configuration_datacenters" does not exist. From: users-bounces@ovirt.org <users-bounces@ovirt.org> On Behalf Of Michal Gutowski Sent: Wednesday, November 25, 2020 12:26 AM To: Vrgotic, Marko <M.Vrgotic@activevideo.com> Cc: users@ovirt.org Subject: [ovirt-users] Re: oVirt 4.3 DWH with Grafana Hi Marko, I've tested this myself as I like playing with various Grafana use-cases and following steps allow you to set up Grafana Monitoring for your oVirt 4.3 environment and re-use all Grafana Dashboards from latest oVirt 4.4 on a previous release. 1. Allowing Grafana to connect to oVirt DWH database (Data Warehouse) Login to the oVirt engine 4.3 and create a user "grafana" with password "grafana" that will get a read-only access to the ovirt_engine_history database and will be able to use public schema # su - postgres -c 'scl enable rh-postgresql10 bash' # psql -U postgres -c "CREATE ROLE grafana WITH LOGIN ENCRYPTED PASSWORD 'grafana';" -d ovirt_engine_history # psql -U postgres -c "GRANT CONNECT ON DATABASE ovirt_engine_history TO grafana;" # psql -U postgres -c "GRANT USAGE ON SCHEMA public TO grafana;" ovirt_engine_history Generate the rest of the permissions that will be granted to the newly created user and save them to a file: # psql -U postgres -c "SELECT 'GRANT SELECT ON ' || relname || ' TO grafana;' FROM pg_class JOIN pg_namespace ON pg_namespace.oid = pg_class.relnamespace WHERE nspname = 'public' AND relkind IN ('r', 'v');" --pset=tuples_only=on ovirt_engine_history > grant.sql Use the file you created in the previous step to grant permissions to the newly created user: # psql -U postgres -f grant.sql ovirt_engine_history Remove the file you used to grant permissions: # rm grant.sql Exit the postgres user shell by pressing Ctrl+d Add the following lines for the newly created user to /var/opt/rh/rh-postgresql10/lib/pgsql/data/pg_hba.conf preceding the line beginning local all all host ovirt_engine_history grafana 0.0.0.0/0 md5 host ovirt_engine_history grafana ::0/0 md5 Reload postgres service # systemctl reload rh-postgresql10-postgresql 2. Installing Grafana You can install Grafana directly on the oVirt Engine machine (this is how it's done in oVirt 4.4) or on a separate machine. Following steps shows how you can install Grafana on a Oracle Linux 7 server. Note: Oracle provides Grafana in the OLCNE yum repository - you only need to install the repository definition package to pickup Grafana and it's dependencies. # yum install oraclelinux-release-el7 # yum install oracle-olcne-release-el7 # yum-config-manager --enable ol7_optional_latest ol7_olcne11 # yum install grafana # systemctl enable --now grafana-server 3. Adding oVirt DWH database as Data Source in Grafana Login to Grafana (default port 3000) and navigate to Configuration -> DataSources and click on Add Data Source button. Select PostgreSQL source and use the following settings (adjust the Host IP address to match your oVirt Engine IP but do not change the Name): Name: oVirt DWH Host: your-engine-ip-address:5432 user: grafana pass: grafana SSL mode: disable 4. Importing Dashboards from oVirt 4.4 Download Grafana Dashboards from oVirt 4.4 repository: https://github.com/oVirt/ovirt-dwh/tree/master/packaging/conf/grafana-dashbo... You can now import them in Grafana by navigating to Create -> Import and clicking on Upload .json file or by simply pasting JSON content. I've tested this on my OLVM/oVirt 4.3 and works perfectly well. Have fun! Michal Michał Gutowski Principal Solutions Engineer, EMEA +48 665 222 979 Oracle Open Cloud Infrastructure Software - Linux & Virtualization On 24 Nov 2020, at 11:53, Vrgotic, Marko <M.Vrgotic@activevideo.com <mailto:M.Vrgotic@activevideo.com> > wrote: Dear oVirt folks, Thank you all for suggestions. I will give it a go and see how far I get. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 m: +31 (65) 5734174 e: <mailto:m.vrgotic@activevideo.com> m.vrgotic@activevideo.com w: <https://urldefense.com/v3/__http:/www.activevideo.com__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwIzsG6Wq$> www.activevideo.com ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: Yedidyah Bar David <didi@redhat.com <mailto:didi@redhat.com> > Date: Sunday, 22 November 2020 at 08:39 To: "Vrgotic, Marko" <M.Vrgotic@activevideo.com <mailto:M.Vrgotic@activevideo.com> > Cc: "users@ovirt.org <mailto:users@ovirt.org> " <users@ovirt.org <mailto:users@ovirt.org> > Subject: Re: [ovirt-users] oVirt 4.3 DWH with Grafana ***CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender!!!*** On Fri, Nov 20, 2020 at 8:45 AM Vrgotic, Marko <M.Vrgotic@activevideo.com <mailto:M.Vrgotic@activevideo.com> > wrote: Dear oVirt, We are currently running oVirt 4.3 and upgrade/migration to 4.4 won’t be possible for few more months. I am looking into guidelines, how to, for setting up Grafana using DataWarehouse as data source. Did anyone already did this, and would be willing to share the steps? AFAIU this is definitely not tested/recommended/supported, but the current (4.4) dashboards use only 4.3 dwh compatibility views. So in theory, 4.4 grafana setup can work against your 4.3 engine/dwh without problems. So you can try something like: 1. Install el8 on some machine 2. Install ovirt-release (4.4!) 3. Install ovirt-engine-dwh-grafana-integration-setup. I *think*, didn't try, that it would carry with it all the dependencies it needs. 4. Run engine-setup. When prompted, only accept "Configure grafana?", and reply "No" to everything else 5. Follow the other prompts as applicable This should be enough. Not sure about the commands to add SSO on the engine machine. Perhaps better verify this first against a test engine (can be on another el7/ovirt4.3 VM with no hosts). But, repeating: this isn't recommended. Did you consider upgrading only your engine, and keep your hosts 4.3 until you can upgrade them later? Best regards, -- Didi _______________________________________________ Users mailing list -- <mailto:users@ovirt.org> users@ovirt.org To unsubscribe send an email to <mailto:users-leave@ovirt.org> users-leave@ovirt.org Privacy Statement: <https://urldefense.com/v3/__https:/www.ovirt.org/privacy-policy.html__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwMWrWYxs$> https://urldefense.com/v3/__https://www.ovirt.org/privacy-policy.html__;!!Gq... oVirt Code of Conduct: <https://urldefense.com/v3/__https:/www.ovirt.org/community/about/community-guidelines/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwKA75xLc$> https://urldefense.com/v3/__https://www.ovirt.org/community/about/community-... List Archives: <https://urldefense.com/v3/__https:/lists.ovirt.org/archives/list/users@ovirt.org/message/QSBZGMZ3NXRYQWO7ZH6O4NRUU4FBUXI7/__;!!GqivPVa7Brio!MNQGrdvOByNX5QiF5EXb3wflIxSqeuWuLViaoQEV9ucR5lBjqOFxuELf_UYdwEcyLO4I$> https://urldefense.com/v3/__https://lists.ovirt.org/archives/list/users@ovir...