[Users] Error trying to add a host

Christian Hernandez christianh at 4over.com
Fri Apr 13 17:07:23 UTC 2012


The error was in the /tmp/vds_bootstrap.675074.log on the host
*
Fri, 13 Apr 2012 09:26:48 DEBUG    **** Start VDS Validation ****
Fri, 13 Apr 2012 09:26:48 DEBUG    Entered VdsValidation(subject = '
bluejay.ovirt.4over.com', random_num =
'7952f4a3-a7cd-4a46-8dbc-0b3f5b201102', rev_num = 'None',
installVirtualizationService = 'True', installGlusterService = 'False')
Fri, 13 Apr 2012 09:26:48 DEBUG    Setting up Package Sacks
Fri, 13 Apr 2012 09:26:48 DEBUG    yumSearch: found vdsm entries:
[<YumAvailablePackageSqlite : vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64
(0x29bee50)>]
Fri, 13 Apr 2012 09:26:48 DEBUG    Host properly registered with
RHN/Satellite.
Fri, 13 Apr 2012 09:26:48 DEBUG    <BSTRAP component='RHN_REGISTRATION'
status='OK' message='Host properly registered with RHN/Satellite.'/>
Fri, 13 Apr 2012 09:26:49 DEBUG    yumSearchVersion: pkg
vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64 starts with: vdsm-4.9
Fri, 13 Apr 2012 09:26:49 DEBUG    Available VDSM matches requirements
Fri, 13 Apr 2012 09:26:49 DEBUG    <BSTRAP component='VDSM_MAJOR_VER'
status='OK' message='Available VDSM matches requirements'/>
Fri, 13 Apr 2012 09:26:49 DEBUG    virtExplorer testing
Fri, 13 Apr 2012 09:26:49 DEBUG    CPU vendor is GenuineIntel
Fri, 13 Apr 2012 09:26:49 DEBUG    virt support in cpu: True, in bios: False
Fri, 13 Apr 2012 09:26:49 DEBUG    <BSTRAP component='VT_SVM' status='FAIL'
processor='Intel' message='Server does not support virtualization'/>
Fri, 13 Apr 2012 09:26:49 ERROR    virtExplorer test failed
Fri, 13 Apr 2012 09:26:49 DEBUG    <BSTRAP component='RHEV_INSTALL'
status='FAIL'/>
Fri, 13 Apr 2012 09:26:49 DEBUG    **** End VDS Validation ****
*
On Fri, Apr 13, 2012 at 10:00 AM, Itamar Heim <iheim at redhat.com> wrote:

> On 04/13/2012 07:58 PM, Christian Hernandez wrote:
>
>>  > are you sure it is enabled at bios level?
>>  > did you perform a cold boot post changing it?
>>
>> I am using CentOS 6.2 on both oVirt server and Host client
>>
>> And IN FACT you are right; I looked in the BIOS and it was disabled! The
>> node was added successfully now; thank you
>>
>
> can you please check what did the error show in the engine when standing
> on the host in install failed status (under the subtab of events) - if you
> didn't remove the host and just re-installed it should still be there, or
> in the main events tab?
>
> thanks,
>   Itamar
>
>
>>
>> --Christian
>>
>>
>> On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim <iheim at redhat.com
>> <mailto:iheim at redhat.com>> wrote:
>>
>>    On 04/13/2012 06:32 PM, Christian Hernandez wrote:
>>
>>        Hello,
>>
>>        I am getting an error trying to add a "host" to oVirt where the
>>        Status
>>        says "Install Failed"
>>
>>        Here is (a snipet ) the log from the oVirt server
>>        (/var/log/ovirt/enginge.log)..**__.I can provide more if needed
>>
>>        /=============================**__======oVirt Server:
>>
>>
>>    ...
>>
>>
>>        <BSTRAP component='VT_SVM' status='FAIL' processor='Intel'
>>        message='Server does not support virtualization'/>
>>
>>
>>    this is causing the host to fail install.
>>
>>    ...
>>
>>        /
>>
>>        I checked on the host itself and it seems like I do have an Intel
>>        Hardware Virt on the server (wasn't a surprise since I BOUGHT it
>>        that
>>        way...but still checked)
>>
>>
>>    are you sure it is enabled at bios level?
>>    did you perform a cold boot post changing it?
>>
>>
>>        /=============================**__============ Node: /proc/cpuinfo
>>        ==============================**__===============/
>>
>>
>>        /[root at bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
>>
>>        flags        : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge
>>        mca cmov
>>        pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
>>        syscall nx lm
>>        constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64
>>        monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave
>>        lahf_lm
>>        dts tpr_shadow vnmi flexpriority/
>>
>>        /=============================**__============================**
>> ==__==========================**====__=============/
>>
>>
>>
>>        Some things to note...
>>
>>        On the Node (under the /etc/vdsm/vdsm.conf  file) I have the
>>        "fake_kvm_support = true" to see if that would make the node
>> install
>>        (didn't work)...also I have "ssl = false" to see if it might be
>>        a cert
>>        error (still didn't work).
>>
>>
>>    is this an ovirt node or regular fedora?
>>
>>
>>        And, yes, I've even tried removing and adding the node
>>        again...still no
>>        luck =\
>>
>>        What are my next steps? Any help would be greatly appreciated!
>>
>>        --Christian
>>
>>
>>        ______________________________**___________________
>>        Users mailing list
>>        Users at ovirt.org <mailto:Users at ovirt.org>
>>        http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users>
>>        <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
>> >
>>
>>
>>
>>
>>
>>
>> ______________________________**_________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20120413/8dd24934/attachment-0001.html>


More information about the Users mailing list