[Users] Booting oVirt node image 2.3.0, no install option
Jason Lawer
akula at thegeekhood.net
Wed Apr 18 10:02:39 UTC 2012
I think I just hit the exact same issue with a Sandisk Crusier Blade 4GB USB stick. I bought 4 of them to try and setup a test system (before we commit to real hardware) and at least 2 of them failed with both 2.2 and 2.3 ovirt isos being copied using dd from a mac.
I copied to a old 8gb "Strontium" USB stick I had lying around and worked without issue. So it appears to be an issue with the stick.
I can provide more specific information on the stick or such if that is useful.
It wouldn't surprise me if its due to the low cost nature of the stick (cost $5 AUD) but I am curious as it booted the kernel fine.
Jason
On 18/04/2012, at 4:48 AM, Adam vonNieda wrote:
>
> Turns out that there might be an issue with my thumb drive. I tried
> another, and it worked fine. Thanks very much for the responses folks!
>
> -Adam
>
>
> On 4/17/12 10:11 AM, "Joey Boggs" <jboggs at redhat.com> wrote:
>
>> On 04/17/2012 10:51 AM, Adam vonNieda wrote:
>>> Thanks for the reply Joey. I saw that too, and thought maybe my USB
>>> thumb drive was set to read only, but it's not. This box doesn't have a
>>> DVD drive, I'll try a different USB drive, and if that doesn't work,
>>> I'll dig up an external DVD drive.
>>>
>>> Thanks again,
>>>
>>> -Adam
>>>
>>> Adam vonNieda
>>> Adam at vonNieda.org
>>>
>>> On Apr 17, 2012, at 9:07, Joey Boggs<jboggs at redhat.com> wrote:
>>>
>>>> On 04/17/2012 09:45 AM, Adam vonNieda wrote:
>>>>> Hi folks,
>>>>>
>>>>> Still hoping someone can give me a hand with this. I can't install
>>>>> overt-node 2.3.0 on a on a Dell C2100 server because it won't start
>>>>> the
>>>>> graphical interface. I booted up a standard F16 image this morning,
>>>>> and
>>>>> the graphical installer does start during that process. Logs are
>>>>> below.
>>>>>
>>>>> Thanks very much,
>>>>>
>>>>> -Adam
>>>>>
>>>>>
>>>>>> /tmp/ovirt.log
>>>>>> ==============
>>>>>>
>>>>>> /sbin/restorecon set context
>>>>>> /var/cache/yum->unconfined_u:object_r:rpm_var_cache_t:s0
>>>>>> failed:'Read-only
>>>>>> file system'
>>>>>> /sbin/restorecon reset /var/cache/yum context
>>>>>>
>>>>>> unconfined_u:object_r:file_t:s0->unconfined_u:object_r:rpm_var_cache_t
>>>>>> :s0
>>>>>> /sbin/restorecon reset /etc/sysctl.conf context
>>>>>>
>>>>>> system_u:object_r:etc_runtime_t:s0->system_u:object_r:system_conf_t:s0
>>>>>> /sbin/restorecon reset /boot-kdump context
>>>>>> system_u:object_r:boot_t:s0->system_u:object_r:default_t:s0
>>>>>> 2012-04-16 09:36:26,827 - INFO - ovirt-config-installer - ::::live
>>>>>> device::::
>>>>>> /dev/sdb
>>>>>> 2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions - cat
>>>>>> /proc/mounts|grep
>>>>>> -q "none /live"
>>>>>> 2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions -
>>>>>> 2012-04-16 09:36:26,915 - DEBUG - ovirtfunctions - umount /live
>>>>>> 2012-04-16 09:36:26,915 - DEBUG - ovirtfunctions -
>>>>>> 2012-04-16 09:36:27,455 - ERROR - ovirtfunctions - Failed to
>>>>>> mount_live()
>>>>>>
>>>>>> /var/log/ovirt.log
>>>>>> ==================
>>>>>>
>>>>>> Apr 16 09:35:53 Starting ovirt-early
>>>>>> oVirt Node Hypervisor release 2.3.0 (1.0.fc16)
>>>>>> Apr 16 09:35:53 Updating /etc/default/ovirt
>>>>>> Apr 16 09:35:54 Updating OVIRT_BOOTIF to ''
>>>>>> Apr 16 09:35:54 Updating OVIRT_INIT to ''
>>>>>> Apr 16 09:35:54 Updating OVIRT_UPGRADE to ''
>>>>>> Apr 16 09:35:54 Updating OVIRT_STANDALONE to '1'
>>>>>> Apr 16 09:35:54 Updating OVIRT_BOOTPARAMS to 'nomodeset
>>>>>> crashkernel=512M-2G:64M,2G-:128M elevator=deadline quiet rd_NO_LVM
>>>>>> rhgb
>>>>>> rd.luks=0 rd.md=0 rd.dm=0'
>>>>>> Apr 16 09:35:54 Updating OVIRT_RHN_TYPE to 'classic'
>>>>>> Apr 16 09:35:54 Updating OVIRT_INSTALL to '1'
>>>>>> Apr 16 09:35:54 Updating OVIRT_ISCSI_INSTALL to '1'
>>>>>> Apr 16 09:36:08 Setting temporary admin password: F8Ax67kfRPSAw
>>>>>> Apr 16 09:36:09 Setting temporary root password: F8Ax67kfRPSAw
>>>>>> Apr 16 09:36:09 Skip runtime mode configuration.
>>>>>> Apr 16 09:36:09 Completed ovirt-early
>>>>>> Apr 16 09:36:09 Starting ovirt-awake.
>>>>>> Apr 16 09:36:09 Node is operating in unmanaged mode.
>>>>>> Apr 16 09:36:09 Completed ovirt-awake: RETVAL=0
>>>>>> Apr 16 09:36:09 Starting ovirt
>>>>>> Apr 16 09:36:09 Completed ovirt
>>>>>> Apr 16 09:36:10 Starting ovirt-post
>>>>>> Apr 16 09:36:20 Hardware virtualization detected
>>>>>> Volume group "HostVG" not found
>>>>>> Skipping volume group HostVG
>>>>>> Restarting network (via systemctl): [ OK ]
>>>>>> Apr 16 09:36:20 Starting ovirt-post
>>>>>> Apr 16 09:36:21 Hardware virtualization detected
>>>>>> Volume group "HostVG" not found
>>>>>> Skipping volume group HostVG
>>>>>> Restarting network (via systemctl): [ OK ]
>>>>>> Apr 16 09:36:22 Starting ovirt-cim
>>>>>> Apr 16 09:36:22 Completed ovirt-cim
>>>>>> WARNING: persistent config storage not available
>>>>>>
>>>>>> /var/log/vdsm/vdsm.log
>>>>>> =======================
>>>>>>
>>>>>> MainThread::INFO::2012-04-16 09:36:21,828::vdsm::71::vds::(run) I am
>>>>>> the
>>>>>> actual vdsm 4.9-0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:23,873::resourceManager::376::ResourceManager::(registerNamespac
>>>>>> e)
>>>>>> Registering namespace 'Storage'
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:23,874::threadPool::45::Misc.ThreadPool::(__init__) Enter -
>>>>>> numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:23,918::multipath::85::Storage.Misc.excCmd::(isEnabled)
>>>>>> '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None)
>>>>>> MainThread::INFO::2012-04-16 09:36:25,000::vdsm::71::vds::(run) I am
>>>>>> the
>>>>>> actual vdsm 4.9-0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:25,199::resourceManager::376::ResourceManager::(registerNamespac
>>>>>> e)
>>>>>> Registering namespace 'Storage'
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,200::threadPool::45::Misc.ThreadPool::(__init__) Enter -
>>>>>> numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,231::multipath::85::Storage.Misc.excCmd::(isEnabled)
>>>>>> '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,243::multipath::85::Storage.Misc.excCmd::(isEnabled)
>>>>>> SUCCESS:
>>>>>> <err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,244::multipath::109::Storage.Multipath::(isEnabled)
>>>>>> multipath
>>>>>> Defaulting to False
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,244::misc::487::Storage.Misc::(rotateFiles) dir: /etc,
>>>>>> prefixName: multipath.conf, versions: 5
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,244::misc::508::Storage.Misc::(rotateFiles) versions found:
>>>>>> [0]
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,244::multipath::118::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /bin/cp /etc/multipath.conf /etc/multipath.conf.1'
>>>>>> (cwd
>>>>>> None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,255::multipath::118::Storage.Misc.excCmd::(setupMultipath)
>>>>>> FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: Read-only
>>>>>> file
>>>>>> system\nsudo: sorry, a password is required to run sudo\n';<rc> = 1
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,256::multipath::118::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /usr/sbin/persist /etc/multipath.conf.1' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,269::multipath::118::Storage.Misc.excCmd::(setupMultipath)
>>>>>> FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: Read-only
>>>>>> file
>>>>>> system\nsudo: sorry, a password is required to run sudo\n';<rc> = 1
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,270::multipath::123::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /bin/cp /tmp/tmpnPcvWi /etc/multipath.conf' (cwd
>>>>>> None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,283::multipath::123::Storage.Misc.excCmd::(setupMultipath)
>>>>>> SUCCESS:<err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,283::multipath::128::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /usr/sbin/persist /etc/multipath.conf' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,294::multipath::128::Storage.Misc.excCmd::(setupMultipath)
>>>>>> FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: Read-only
>>>>>> file
>>>>>> system\nsudo: sorry, a password is required to run sudo\n';<rc> = 1
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,295::multipath::131::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /sbin/multipath -F' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,323::multipath::131::Storage.Misc.excCmd::(setupMultipath)
>>>>>> FAILED:<err> = '';<rc> = 1
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:25,323::multipath::134::Storage.Misc.excCmd::(setupMultipath)
>>>>>> '/usr/bin/sudo -n /sbin/service multipathd restart' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,397::multipath::134::Storage.Misc.excCmd::(setupMultipath)
>>>>>> SUCCESS:<err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:26,398::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingType
>>>>>> )
>>>>>> '/usr/bin/sudo -n /sbin/lvm dumpconfig global/locking_type' (cwd
>>>>>> None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:26,443::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingType
>>>>>> )
>>>>>> SUCCESS:<err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,445::lvm::319::OperationMutex::(_reloadpvs) Operation 'lvm
>>>>>> reload
>>>>>> operation' got the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,447::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n
>>>>>> /sbin/lvm pvs --config " devices { preferred_names =
>>>>>> [\\"^/dev/mapper/\\"]
>>>>>> ignore_suspended_devices=1 write_cache_state=0
>>>>>> disable_after_error_count=3
>>>>>> filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\",
>>>>>> \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1
>>>>>> wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } "
>>>>>> --noheadings --units b --nosuffix --separator | -o
>>>>>>
>>>>>> uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_co
>>>>>> unt,
>>>>>> d
>>>>>> ev_size' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,811::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> =
>>>>>> '';
>>>>>> <rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,811::lvm::342::OperationMutex::(_reloadpvs) Operation 'lvm
>>>>>> reload
>>>>>> operation' released the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,812::lvm::352::OperationMutex::(_reloadvgs) Operation 'lvm
>>>>>> reload
>>>>>> operation' got the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:26,812::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n
>>>>>> /sbin/lvm vgs --config " devices { preferred_names =
>>>>>> [\\"^/dev/mapper/\\"]
>>>>>> ignore_suspended_devices=1 write_cache_state=0
>>>>>> disable_after_error_count=3
>>>>>> filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\",
>>>>>> \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1
>>>>>> wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } "
>>>>>> --noheadings --units b --nosuffix --separator | -o
>>>>>>
>>>>>> uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_m
>>>>>> da_s
>>>>>> i
>>>>>> ze,vg_mda_free' (cwd None)
>>>>>> MainThread::INFO::2012-04-16 09:36:29,307::vdsm::71::vds::(run) I am
>>>>>> the
>>>>>> actual vdsm 4.9-0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:29,514::resourceManager::376::ResourceManager::(registerNamespac
>>>>>> e)
>>>>>> Registering namespace 'Storage'
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,515::threadPool::45::Misc.ThreadPool::(__init__) Enter -
>>>>>> numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,551::multipath::85::Storage.Misc.excCmd::(isEnabled)
>>>>>> '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,564::multipath::85::Storage.Misc.excCmd::(isEnabled)
>>>>>> SUCCESS:
>>>>>> <err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,565::multipath::101::Storage.Multipath::(isEnabled) Current
>>>>>> revision of multipath.conf detected, preserving
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:29,565::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingType
>>>>>> )
>>>>>> '/usr/bin/sudo -n /sbin/lvm dumpconfig global/locking_type' (cwd
>>>>>> None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>>
>>>>>> 09:36:29,606::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingType
>>>>>> )
>>>>>> SUCCESS:<err> = '';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,606::lvm::319::OperationMutex::(_reloadpvs) Operation 'lvm
>>>>>> reload
>>>>>> operation' got the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,608::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n
>>>>>> /sbin/lvm pvs --config " devices { preferred_names =
>>>>>> [\\"^/dev/mapper/\\"]
>>>>>> ignore_suspended_devices=1 write_cache_state=0
>>>>>> disable_after_error_count=3
>>>>>> filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\",
>>>>>> \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1
>>>>>> wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } "
>>>>>> --noheadings --units b --nosuffix --separator | -o
>>>>>>
>>>>>> uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_co
>>>>>> unt,
>>>>>> d
>>>>>> ev_size' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,714::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> =
>>>>>> '';
>>>>>> <rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,715::lvm::342::OperationMutex::(_reloadpvs) Operation 'lvm
>>>>>> reload
>>>>>> operation' released the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,716::lvm::352::OperationMutex::(_reloadvgs) Operation 'lvm
>>>>>> reload
>>>>>> operation' got the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,716::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n
>>>>>> /sbin/lvm vgs --config " devices { preferred_names =
>>>>>> [\\"^/dev/mapper/\\"]
>>>>>> ignore_suspended_devices=1 write_cache_state=0
>>>>>> disable_after_error_count=3
>>>>>> filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\",
>>>>>> \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1
>>>>>> wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } "
>>>>>> --noheadings --units b --nosuffix --separator | -o
>>>>>>
>>>>>> uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_m
>>>>>> da_s
>>>>>> i
>>>>>> ze,vg_mda_free' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,813::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> =
>>>>>> ' No
>>>>>> volume groups found\n';<rc> = 0
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,814::lvm::379::OperationMutex::(_reloadvgs) Operation 'lvm
>>>>>> reload
>>>>>> operation' released the operation mutex
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,815::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n
>>>>>> /sbin/lvm lvs --config " devices { preferred_names =
>>>>>> [\\"^/dev/mapper/\\"]
>>>>>> ignore_suspended_devices=1 write_cache_state=0
>>>>>> disable_after_error_count=3
>>>>>> filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\",
>>>>>> \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1
>>>>>> wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } "
>>>>>> --noheadings --units b --nosuffix --separator | -o
>>>>>> uuid,name,vg_name,attr,size,seg_start_pe,devices,tags' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,916::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> =
>>>>>> ' No
>>>>>> volume groups found\n';<rc> = 0
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:29,917::misc::1017::SamplingMethod::(__call__) Trying to enter
>>>>>> sampling method (storage.sdc.refreshStorage)
>>>>>> MainThread::INFO::2012-04-16
>>>>>> 09:36:29,919::dispatcher::121::Storage.Dispatcher::(__init__)
>>>>>> Starting
>>>>>> StorageDispatcher...
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:29,919::misc::1019::SamplingMethod::(__call__) Got in to
>>>>>> sampling
>>>>>> method
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:29,921::misc::1017::SamplingMethod::(__call__) Trying to enter
>>>>>> sampling method (storage.iscsi.rescan)
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:29,921::misc::1019::SamplingMethod::(__call__) Got in to
>>>>>> sampling
>>>>>> method
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:29,921::iscsi::389::Storage.Misc.excCmd::(rescan)
>>>>>> '/usr/bin/sudo -n
>>>>>> /sbin/iscsiadm -m session -R' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:29,930::utils::595::Storage.Misc.excCmd::(execCmd)
>>>>>> '/usr/bin/pgrep
>>>>>> -xf ksmd' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,108::utils::595::Storage.Misc.excCmd::(execCmd)
>>>>>> SUCCESS:<err> =
>>>>>> '';<rc> = 0
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:30,116::iscsi::389::Storage.Misc.excCmd::(rescan) FAILED:<err>
>>>>>> =
>>>>>> 'iscsiadm: No session found.\n';<rc> = 21
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:30,116::misc::1027::SamplingMethod::(__call__) Returning last
>>>>>> result
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:30,117::supervdsm::83::SuperVdsmProxy::(_killSupervdsm) Could
>>>>>> not
>>>>>> kill old Super Vdsm [Errno 2] No such file or directory:
>>>>>> '/var/run/vdsm/svdsm.pid'
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:30,117::supervdsm::71::SuperVdsmProxy::(_launchSupervdsm)
>>>>>> Launching
>>>>>> Super Vdsm
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:30,118::supervdsm::74::Storage.Misc.excCmd::(_launchSupervdsm)
>>>>>> '/usr/bin/sudo -n /usr/bin/python /usr/share/vdsm/supervdsmServer.pyc
>>>>>> bd4b3ae7-3e51-4d6b-b681-d5f6cb5bae07 2945' (cwd None)
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,254::supervdsmServer::170::SuperVdsm.Server::(main) Making
>>>>>> sure
>>>>>> I'm root
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,255::supervdsmServer::174::SuperVdsm.Server::(main) Parsing
>>>>>> cmd
>>>>>> args
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,255::supervdsmServer::177::SuperVdsm.Server::(main)
>>>>>> Creating PID
>>>>>> file
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,255::supervdsmServer::181::SuperVdsm.Server::(main)
>>>>>> Cleaning old
>>>>>> socket
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,255::supervdsmServer::185::SuperVdsm.Server::(main) Setting
>>>>>> up
>>>>>> keep alive thread
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,256::supervdsmServer::190::SuperVdsm.Server::(main) Creating
>>>>>> remote object manager
>>>>>> MainThread::DEBUG::2012-04-16
>>>>>> 09:36:30,256::supervdsmServer::201::SuperVdsm.Server::(main) Started
>>>>>> serving super vdsm object
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:32,124::supervdsm::92::SuperVdsmProxy::(_connect) Trying to
>>>>>> connect
>>>>>> to Super Vdsm
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:32,133::supervdsm::64::SuperVdsmProxy::(__init__) Connected to
>>>>>> Super
>>>>>> Vdsm
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,070::multipath::71::Storage.Misc.excCmd::(rescan)
>>>>>> '/usr/bin/sudo
>>>>>> -n /sbin/multipath' (cwd None)
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,130::multipath::71::Storage.Misc.excCmd::(rescan)
>>>>>> SUCCESS:<err>
>>>>>> = '';<rc> = 0
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,131::lvm::460::OperationMutex::(_invalidateAllPvs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' got the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,131::lvm::462::OperationMutex::(_invalidateAllPvs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' released the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,132::lvm::472::OperationMutex::(_invalidateAllVgs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' got the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,132::lvm::474::OperationMutex::(_invalidateAllVgs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' released the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,133::lvm::493::OperationMutex::(_invalidateAllLvs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' got the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,133::lvm::495::OperationMutex::(_invalidateAllLvs)
>>>>>> Operation 'lvm
>>>>>> invalidate operation' released the operation mutex
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,133::misc::1027::SamplingMethod::(__call__) Returning last
>>>>>> result
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,133::hsm::272::Storage.HSM::(__cleanStorageRepository)
>>>>>> Started
>>>>>> cleaning storage repository at '/rhev/data-center'
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,136::hsm::304::Storage.HSM::(__cleanStorageRepository) White
>>>>>> list: ['/rhev/data-center/hsm-tasks',
>>>>>> '/rhev/data-center/hsm-tasks/*',
>>>>>> '/rhev/data-center/mnt']
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,136::hsm::305::Storage.HSM::(__cleanStorageRepository) Mount
>>>>>> list: ['/rhev/data-center']
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,136::hsm::307::Storage.HSM::(__cleanStorageRepository)
>>>>>> Cleaning
>>>>>> leftovers
>>>>>> Thread-11::DEBUG::2012-04-16
>>>>>> 09:36:34,136::hsm::350::Storage.HSM::(__cleanStorageRepository)
>>>>>> Finished
>>>>>> cleaning storage repository at '/rhev/data-center'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 4/16/12 8:38 AM, "Mike Burns"<mburns at redhat.com> wrote:
>>>>>>
>>>>>>> On Mon, 2012-04-16 at 08:14 -0500, Adam vonNieda wrote:
>>>>>>>> Hi folks,
>>>>>>>>
>>>>>>>>
>>>>>>>> I'm trying to install oVirt node v2.3.0 on A Dell C2100
>>>>>>>> server. I
>>>>>>>> can boot up just fine, but the two menu options I see are "Start
>>>>>>>> oVirt
>>>>>>>> node", and "Troubleshooting". When I choose "Start oVirt node", it
>>>>>>>> does just that, and I am soon after given a console login prompt.
>>>>>>>> I've
>>>>>>>> checked the docs, and I don't see what I'm supposed to do next, as
>>>>>>>> in
>>>>>>>> a password etc. Am I missing something?
>>>>>>> Hi Adam,
>>>>>>>
>>>>>>> Something is breaking in the boot process. You should be getting a
>>>>>>> TUI
>>>>>>> screen that will let you configure and install ovirt-node.
>>>>>>>
>>>>>>> I just added an entry on the Node Troublesooting wiki page[1] for
>>>>>>> you to
>>>>>>> follow.
>>>>>>>
>>>>>>> Mike
>>>>>>>
>>>>>>> [1] http://ovirt.org/wiki/Node_Troubleshooting#Boot_up_problems
>>>>>>>
>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>>
>>>>>>>> -Adam
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>> This is definitely the cause of the installer failing
>>>>
>>>> 2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions - cat
>>>> /proc/mounts|grep -q "none /live"
>>>> 2012-04-16 09:36:27,455 - ERROR - ovirtfunctions - Failed to
>>>> mount_live()
>>>>
>>>>
>>>>
>>>> What kind of media are you installing from: usb/cd/remote console?
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>> I did go back and take a look at mount_live and made sure it contains a
>> specific patch to handle usb drives properly. If you can get back to a
>> shell prompt. run blkid and capture the output. If it's way too much to
>> type then just the usb drive output should be ok.
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list