[Users] Ovirt 3.0 : remove failed iscsi domain

[Dafna Ron]

On 08/07/2012 01:34 PM, Vincent Miszczak wrote:
>
> Hello,
>
> During my tests, I had setup a iSCSI domain for my test node.
>
> I have removed the corresponding LUN on the SAN but not in ovirt, and
> it does not appear anymore in ovirt GUI.
>

removing the lun in the storage will have no effect on the domain object
in the ovirt db or vds host. so did you run anything else, if so what?
if not, the lun should be represented as a domain under the domains tab
and should still be there.
I need to know exactly what you did so we can know what was not cleaned
in ovirt and help you clean it.
>
> The problem is that my node still tries to connect to the SAN, and the
> SAN logs those failures.
>

yes, it will keep trying to connect since you did not remove it from
ovirt so it will keep trying to connect to the target.
>
> What is the way to properly remove the LUN in ovirt ?
>

> (I won’t be able to bring the LUN online at all).
>

please let me know if you see the domain in the UI and if not what else
did you run and we'll continue from there.


Dafna

> Regards
>
>
> -- 
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


-- 
Dafna Ron