[Users] oVIrt 3.1 - Network Bonding

[Moti Asayag]

Hi,

There was a bug about this issue before which is solved:
https://bugzilla.redhat.com/show_bug.cgi?id=820989

Which version are you using ? Is it built from source or installed from
rpms ?

A simple test to verify if this fix included is to create the management
network (ovirtmgmt) over a nic with static boot protocol (also provide
ip, subnet mask and gateway).

Than via the Setup Networks drag another nic on top of the management
nic. If it fails for the same reason (NETWORK_ATTACH_ILLEGAL_GATEWAY) -
your version doesn't include that fix. If this scenario does work -
there is a potentially bug.

Note that the you shouldn't modify the management network bridge
connectivity details (meaning use the same ip, subnet mask and gateway).

I think this topic is entitled to its own thread as it was concealed in
a long unrelated thread.

Thanks,
Moti

On 08/13/2012 03:55 PM, Ricardo Esteves wrote:
> Hi,
> 
> I the attached picture "net1.jpg" i have my initial network configuration.
> 
> Physical card (em1) with vlan 10 (em1.10) bridged to the ovirtmgmt with
> IP 192.168.10.25 and default gw 192.168.10.254.
> 
> Now i want to bond em1 card with p1p1 card (attached picture net2.jpg)
> 
> But if i fill the default gw it gives me this error: The default gateway
> should be set only on engine network.
> 
> If i don't fill the default gw, when i click ok, i loose connection to
> the server and then after more or less 1 minute the server automaticaly
> reboots.
> 
> Anyone had this kind of problem?
> 
> Best regards,
> Ricardo Esteves.
> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>